Since I have upgraded to wm6 my outlook won't get the new emails automatically from exchange server. I have to click on "send/receive" manually to get the new messages.
I can't find any setting to change. Can anyone help me?
AT&T 8525
vp3G v3.60
Thx
From memory, the setting is in Activesync and under Schedule or something like that (it's one of the top three in the menu). Definitely remember it was in Activesync though. Should say "When mails arrive" - sounds like yours is on "Manual".
Hope that helps!
that was it. Thank you so much
Related
Hi Guys
im currently using the LVSW rom (which is awesome by the way!) and have it perfecto apart from one issue.
I seem unable to tell it that my Exchange mail is HTML. The dialogue for this is greyed out in the settings and I can find no way to enable this and so all my mail is coming down as plain text. In the meantime I have switched back to IMAP.
Is this a LVSW build issue or something I don't understand/missed. I must point out that this is very possible as i'm a total newb!!!
Out of curiosity, does the fact that activesync is constantly on (And appears to be connected - but this could be "push" technology) drain my battery?
Many thanks for your help!!!
Build: 20070325_RUU_Hermes_WWE_3.23.0.2_1.38.00.10
You need exchange 2007.
Look at my post I have adapted a doc from someone else in the community...
Also have a look www.httpsync.net ....
You will found some doc. about Direct Push even with Exchange 2007 sp1 ..
Ahh ok.
Thanks very much
Guess I will be sticking with IMAP then
I sync to Mac and so use Missing Sync from Markspace.
This worked well with WM5 Roms indeed, IMO more user friendly than ActiveSync.
The changes made in WM6 means that device will only look for PC with ActiveSync on (for security issues?) and so Missing Sync won't connect.
Markspace are dealing with this issue and in time will re-write to solve this issue however, it leaves me with a serious problem at the moment and possibly for some consderable time!
Has anyone managed to work around this issue, if so could you let me know.
Thanks
hdd123
SVP M3100
Black 2.5
Radio 1.41.00.10
I can think of only one way, but you need Entourage on your Mac.
(1) Set up an account with 4smartphone.net
(2) Have Entourage sync with 4smartphone
(3) Have your Hermes sync with 4smartphone.
This works like magic. LIKE MAGIC I tell you. You change something on your Hermes, and - look ma, no hands - you go back to your Mac and the info has changed there too. And the other way around! and it is all pushed! GEEK HEAVEN.
They offer a trial period ... might just be long enough for MarkSpace to come up with a solution.
If you have Office for Mac installed, but do not use Entourage but instead use iCal, then you need to set up Entourage to sync with the iCal database. The option is somewhere in Entourage.
That's well and good, but only a partial solution. Entourage only syncs Email, Contacts and Calendar with an Exchange server. You'll still be missing out on Tasks, Notes, iPhoto and iTunes which Missing Sync takes care of nicely. I do hope MarkSpace works it out soon, but that's not likely to happen until there are some shipping WM6 devices available in the States...
I second that...
Man I really really need Missing Sync again!!!! I'm sure we're not the only ones
Is there a way to hack and reverse that security feature?
Cooks and cooders we can put a bounty on this!
Thanks for your advice nispen. I Have sorted out 4smartphone account as i run Entourage. I have had partial success in that have been able to sync to an exchange server but must have made a mistake somewhere as contacts in entourage are not being updated. This said, I have been able to get all addresses in one place - on phone and in Mac Address book so at least I'm halfway there!
Like spidy.web says, as the problem ultimatly likes within WM6 being secure - someone out there might be able to solve this problem - a reg edit or something?
hdd123
Well I finally got my TyTn, TNT flashed, unlocked and good to go!
However, I have one question/issue.
Until I can get Blackberry Connect to work (how do I create a PIN?) I am using my IMAP4 account.
I did this all the time with my old 6700 and had no problems, but under WM6, it will start to download/send email and crash most of the way through.
Any thoughts?
Thank you!
Yeah I'd noticed this problem recieving IMAP mail in WM6 on my Hermes. WM5 worked without a problem. With WM6 it will receive about 50% of my email and then say something like "failed to download email". I then click on the 'Send/Receive' option again to get the rest of the email. It's not a show stopper but is a little annoying. If anyone has any suggestions I'd be grateful. Maybe there are some timeout settings in the registry that I don't know about.
Hi,
I am running Ricky's v24 WM 6.1. I use EasySync to sync with my Lotus Notes contact, calendar, todo, and email. Everyday, i get this alert from "DontForget" indicating that I have 26 unread email. The email reader in the sliding panel indicates 0 mail.
I'd imagine Outlook email downloaded via ActiveSync would be in similar situation, in case you don't use Notes.
Any suggestions on what I can use to read, or just get rid of the email downloaded via sync? I've changed the EasySync setting so it no longer downloads email.
Many thanks!
the sliding panel will show you how many new emails you have. Once you acces the email page that will disappear; this does not mean you have read all the emails. You may have unread emails in your folder and that may cause "Don't forget" to give you a message. Look through all your emails and look for the ones that show that they havent been read.
Hopefully that helps.
what application can I use to read the email?
rydr1 said:
the sliding panel will show you how many new emails you have. Once you acces the email page that will disappear; this does not mean you have read all the emails. You may have unread emails in your folder and that may cause "Don't forget" to give you a message. Look through all your emails and look for the ones that show that they havent been read.
Hopefully that helps.
Click to expand...
Click to collapse
Thank you for the reply! The problem is, I don't know what application I can use to read the email. I normally rely on the sliding panel to take me to the email application, but in this case, it only tells me the there is no MMS message. Any suggestions on which program to run? Or where is the folder?
thanks, again!
if you can get to SMS or MMS just move the D pad to the right or left till it shows emails.
anewbie said:
Thank you for the reply! The problem is, I don't know what application I can use to read the email. I normally rely on the sliding panel to take me to the email application, but in this case, it only tells me the there is no MMS message. Any suggestions on which program to run? Or where is the folder?
thanks, again!
Click to expand...
Click to collapse
I've had this problem before, where one of my options in my sliding panels is inaccessible. Try restarting the phone and see if e-mail is accessible after that.
Does any software to sync Lotus Notes with WM6.1
I am seriously considering buying the HTC Touch Diamond, which runs on WM6.1. My company uses Lotus Notes. It is a show stopper if I can't see my email on this device. When I talked to Easy Sync yesterday, they tried to get me to buy something to load on my server at work, which obviously is not the same as the basic Easy Sync software. M-Notes doesn't seem to have anything either. Any other suggestions?
stevebjorkman said:
I am seriously considering buying the HTC Touch Diamond, which runs on WM6.1. My company uses Lotus Notes. It is a show stopper if I can't see my email on this device. When I talked to Easy Sync yesterday, they tried to get me to buy something to load on my server at work, which obviously is not the same as the basic Easy Sync software. M-Notes doesn't seem to have anything either. Any other suggestions?
Click to expand...
Click to collapse
there is an app called mnotes made by commontime. there is a trial version of it so you can try before you buy. i dont think on the server side you need additional software. if you dont have a phone with 6.1, all i can suggest is to find a buddy that does and let him test it on your lotus server. the software does run on wm6, so im pretty certain it wont be an issue on 6.1. i realize im a complete stranger, but if all else fails, let me know and i can test it against your server.
Hey Folks,
I've tried looking and I couldn't find anything.
I received my Tilt 2 a few days ago and set up my Outlook Email.
Everything worked fine and my Inbox and Calander tied up to my work server.
The problem is when I receive a new email...the phone doesn't receive it. I have to actually hit "SEND/RECEIVE" to get the new emails...they are pushed through!
I've checked everything and copied the settings from my previous WM phone. I have the schedule set to "As items come".
Any help?
Thank you much!
Open your Wireless Manager and make sure Microsoft Direct Push is turned on?
I am also having a problem with outlook syncing and notifications. I previously used a Tilt and then a Fuze and one of the things that I like the best was that outlook email would arrive and I would get notified quicker than on my PC.
With the Tilt2 it takes a long time to get the notification (envelope on top) and the email itself unless I send/receive.
Push is turned on all other settings are correct. My next step will be to hard reset and try again.
Has anyone else run into this issue?
Change your messaging options for your Outlook email.
Go to email box....click "Menu" then select "Option"
Then select the email account, then edit account setup.
Continue to press "Next" until you reach the "Automatic Send/Receive"
Make your changes as needed.
I have my Tilt 2 setup every 5 minutes and downloads today's messages only.
I hope this help....
That works fine for regular email accounts. I have that setup for my other email accounts. Outlook uses push mail through activesync and it should be immediate. Unfortunately something has made this stop working.
I am assuming that you have selected option under schedule "as items arrive".
If so, then you might want to look at your server to make sure that is it not the problem.
If not there, you might try deleting and reinstalling the outlook active sync account on your phone.
If that does not work, you might have to resort to a hard reset.
Good luck.