I'm having several problems with my Qtek 9090
There's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off.
People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone.
I haven't been able to find a BT headset that works with it. They all have the same problem; The sound scratch so much they're unusable. I tried 3 different brands that all works well with my 2020!
The GSM link often "falls out" - even though there's plenty of link the phone doesn't work (nothing happens when I try to call someone). A soft reset solves this problem!
As you can see, I can hardly use the device as a phone at all I've had the device replaced once, but all the problems persists on the replacement.
Does anyone have similar problems?
1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!
Try a Motorola HS810 headset... works fine for me.
harry_mb said:
1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!
Click to expand...
Click to collapse
I've already tried Jabra Freespeak 250, which didn't work for me
No I haven't updated the ROM as I've been told by the supplier that no new version is available yet!
outz said:
Try a Motorola HS810 headset... works fine for me.
Click to expand...
Click to collapse
I also tried both a Motorola and a SonyEricsson BT headset, but I don't remember the specific models - they both scratched immensely
i use SE 60 and it works ok
As you said, the Jabra250 is pretty much unusable!
Crackling is not constant but goes in waves, even though I do not move.
Am at a bit of a loss what to do now... the device is great apart from this.
>> People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone
yes PBT read my other post
I have the same problem!!
it is scandalous to sel an device with this big defect!!
Sony HBH-660 works good for me.
People say that they can't hear me when I use the handset, but I don't have any crackling, etc with the headset and voice is clear. You just never know if the headset is going to connect when the phone rings though.
sound from screen
there's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off
Click to expand...
Click to collapse
I have this problem also, I was told to use the new rom but this has made no difference, Please let me know if you have found a solution
[/quote]
Guys,
the hissing coming from the screen is a power supply problem. keep swapping phones until it goes away! I used to build switching power supply and the hissing (in a system designed to operate well above 20kHz) is only able to be heared when unstable, inductor core or cap is broken. The hissing is very 'not normal'.
It appears that the Q9090 is standing out as having more problems than the MDAIII, one is the mic volume, most of the other phones are not complaining about this so there may be something with they way the Q9090 are updated or shipped.
With the Jabra 250, don't forget to pair it pressing BOTH the volume and phone button on the headset on discovery with the 9090.(On bonding, turn off headset, turn on again pressing both buttons)
Funny thing is, I had the cracking also. I deleted the headset in BT manager and paired it again as described above. Now it works ok.
Hi,
I bought a Qtek 9090 a few days ago and I also have the same problem with volume level. People can't hear me when speaking, either with the headset or base microphone.
Using a different headset doesn't help (that's even worse sometimes) but I didn't try a BT heaset (and I don't want to as it would raise potential connection problems). I'm going to contact Qtek for support on this...
Pierre
I too am having problems with the Jabra 250 BT headset and my SPV M2000. The Jabra 250 worked fine on the XDAII but is terribly crackly on the newer model.
This is even when pairing it with the enhanced pairing of pressing Volume Up and Phone button together to pair.
Any ideas?
qtek 9090 bluetooth problem
Hi All,
I have new qtek9090 with cellink bluetooth headset. It is work normal, but i am loosing connection to headset each time qtek go to stand by mode. I need to switch off/on the bluetooth in order to restore the connection. Any ideas?
I often get a message stating:
"The Bluetooth Radio failed to turn ON due to insufficient driver momory available. You must perform a normal reset before you can turn ON the Bluetooth Radio."
Does your device also give you this message?
Is it also using the Broadcom "Bluetooth for Windows CE BT-PPC/PE Version 1.0.0 Build 2200"?
Interested to know if you have the same problems with the same bluetooth driver.
same problem
My qtek 9090 shows te same problem
This is a known problem with the Blue Angel, unfortunately, until they bring out a fix, all you can do is a soft reset.
upgrade
hi all,
how can i get updates from www.imateclub.com?
I can't register there, because I have qtek 9090 and not i-mate
thanks
O2 Sourced info on which BT headsets work
See: http://www.my-xda.com/downloads/Other_Bluetooth.pdf
Hello, i bought Stereo bluetooth headphones JABRA BT 620s. Connected them to maj Uni and phonecall is OK. But when i want listen music the music is interrupting and sometimes the music going slower and slower. It seems like old gramophone whne u put finger on gramophon record during playing.
I upgraded Uni to Helmi AKU3.5 ver 1.3 and radio to 1.14.10 but no change ...
When i connect these phones to my friends mobil SE W710i it works perfectly ... If i asked about this problem contact centrum of Jabra they said that probably Bluetooth hasnot enough capacity ??? I hope its not truth...
Somebody has some idea how to repair this problem ?
Thank you
Me too
Hi,
had the same problem. I tried several tips published on this forum without any success. I was told by the dealer where i bought it that they also thought it would not work. I could bring it return without problem.
I am still looking for an alternative (BT, Stereo, microphone), preferably in-ear solution. Anyone an idea?
Hi all
As this is my first post I just want to say a big thankyou for all the contributers to this site, awesome information and keep up the good work.
I have been running Black Majik on my M3100 for a week or so now and have been really impressed. the only slightly annoying problem I have is with my BT Stereo headset (HTC BH S100) which I have had only a couple of days.
Listening to music and controlling the media player(s) (Audio Manager and WMP) is fine, the problem I get is answering/initiating calls from the headset. After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
I have searched multiple forums but have not found anything of use yet!!
Does anyone have any ideas
Thanks in advance
M.
+1
same problem
please help us
Up ... Same WM6 version, same problem ... with a Nokia BT Headset, and a Sony Ericsson too ...
Thank you.
guess i have a worse problem then. cant hear my phone ring from my BT HS. not that ive tried to figure it out. i can live without listening to music. but it would be interesting to know how everyone is able to hear their phone ring from their headsets. im thinking its because of my headset. i have a moto hs810. does anybody concur?
merlynuk said:
Hi all
........
After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
..........
M.
Click to expand...
Click to collapse
I have the same problem and I've tried a P3600 and kaiser and the same problem.
As merlynuk wrote the problem seem that the HD lose a free hand function of it profile and only a reset and sometime a pairng od device solve it.
It's for me important to use this function in car or call a voice command but the MTB button seem not work.
bought this HD because belived it would be perfect with a HTC PDA but it's not really.
Do you have some suggestion ?
Do you believe it's better to sell this HD and to buy another ?
Someone know a HD device thet work perfectly as free hand and function as a call, a start a vocal command etc etc work fine ?
Regards
aladino
got the same problem: bought the HTC BH S100 after my touch cruise cause I thought to have no problem with vocal commands, but it doesn't work. music, player control, phone and pairing are perfect but no vocal dialling..
how can we solve this??
hi there
yesterday i took a bluetooth device samsung
and i paired with my htc excalibur
i am not able to hear music on my headset what is the problem
i can only listen to calls
is there any patch for the phone? please let me know
i have rickywatt rom 6.1 on my phone
i think there is no a2dp on my phone
please help
According to this, you do have A2DP on the phone. However, you did not mention which headset model you had which could possibly lack A2DP.
thanks for the reply
i have samsung wep200 bluetooth device
but the same device i used with nokia e50 the music comes on the headset
but on my htc music doest works
is there any setting for that
This link might be what will help and fix your issue.
Hi all,
I come from the TP2 and used my jabra JX10 9old, 1st version) on it.
The system sounds were forwarded to the headset without problem. I heard the noticiation, alarm or ringtone as if it was coming from the internal speaker.
Connecting the same headset to the DHD now, I hear only a 'signal' informing that I have an incoming call.
Deciding that I need a newer headset to go with the new phone I tried a few headsets but get the impression that it is not possible to hear system sounds. Can somebody please confirm this possibility with any of the BT headsets around.
If I put an 'oldphone' as a ringtone, I want to hear that 'oldphone' when I get a call. Same more incoming emails, sms etc. Please advise which headset is capable of doing so.
I just tried the Jabra extreme. Music is being forwarded if I play it, but the system sounds are not coming through, this although the BT settings show that phone and media sounds are forwarded to the headeset.
with many thanks for a good advise,
Ruud
this is a tricky one... have you installed any custom roms etc?
fkofilee said:
this is a tricky one... have you installed any custom roms etc?
Click to expand...
Click to collapse
Hi fkofilee,
no, I am still on stock-rom, purchased in Russia from one of the official dealers proposed on HTC's website. I am quite sure that I am fully original.
For the moment I am not into flashing another ROM. I came to the HDH with the main hope that this continously flashing would stop. It just takes too much time and it never was perfect anyway.
About the topic at hand :
I now have tried Jabra JX10 series 2, Jabra extreme and Jabra Stone on my DHD. All of which show that they forward phone and media, but none of them is giving me ringtones, notifications & alarm at the moment they sound at the phone.
If this is standard Android, next question would be if somebody has an additional software which is able to arrange this, I would be happy to try.
regards,
Ruud
Still hoping
Hi all,
added the Plantronic Voyager Pro to the mix, same result. Not even showing phone audio and media, but only phone audio. Though it was certainly a better fit for my ears, the fact that one more is lacking the result I am seeking was not convincing enough to purchase it.
Anyone please, who is able to get system sounds through Bluetooth. I really liked it with my TP2, to be "in meetings" not disturbing anyone, but being informed about all that my phone usually barks at me.
Regards,
Ruud