I just got a O2 XDA Exec and i found its touch screen is not working with stylus. I followed the instruction to re-celebrate the mobile and I tried with the cross (+) sign for 2 hours but it kept on repeating and the cross (+) has been moving when i tap on it with my stylus. It went on for whole night !
Then i hard reset the phone with factory settings and now the first screen appears os the Align Screen to celebrate the phone and I simply can't get through this screen my pressing the center of the Cross (+).
I used the phone for last 2 days, with sync and all but my touch screen was not working with stylus. Thats why i tried to repair it and now I fell in to big mess. Pls help. My email: zkararz at yahoo.com
Related
Hi everyone,
I have recently purchased an XDA2i from O2 and have an ongoing problem.
The unit has been exchanged once already as the original was thought to be the cause.
The VERY annoying problem is that my XDA keeps turning itself off when the signal gets low or is lost?
I've checked the main power save settings along with those in the o2 screen but the unit still does it.
Could any of you wonderful people shed some light on the problem? :?
Moved to the Blue Angel forum (coz that is the correct forum for this question).
What do you mean, it turns itself off? You mean the screen turns off, or do you mean that the phone part turns itself off (so that you get the X instead of the signal strength icon)?
How do you turn it on again once it's done this?
The green light at the top right of the xda flashes but to turn the unit back on I have to soft reset it by pressing the reset button (bottom left) as the power button will not work??? :?
If I can not sort it by tomo she'll be going back and I'll sadly be havin to go back to a standard phone. :?
The XDA2i isnt a blue angel is it? :?
Sometimes the on button takes a second or two to work. It's not *always* instant. Try pressing it as normal and waiting up to five seconds. You might find that the machine springs into life. (I don't mean press and hold - just a normal momentary press.)
I thought the XDA IIs was the Blue Angel, but I'm not sure.
Yes, HappyGoat made an error. The XDA IIi is an Upgraded XDA II with a faster processor and wifi. The XDA IIs is the Blue Angel.
Yup...my bad....should have moved it to Himalaya...and do these things when I am not drinking beers...
Anybody could pls help...
On my qtek 9090 I've a screen little broken and tap screen is not workin on down-right-side, but everything else works ok...till now
I had a hard reset and at the begining I should perform the align screen...but as in some places taping is not working it continues to ask me for align screen! I tried to do it by other keys but nothing!
Now I'm stuck at align screen!!! How could I move on???
Thanks in advance
:shock:
Stuck on Align Screen
Me Also,
Reset the device after an upgrade.
Asks to align screen - I do the middle and the four corners and it just repeats and goes back to the beginning again.
Please Help.......
Stuck on Align Screen
Me Also,
Reset the device after an upgrade.
Asks to align screen - I do the middle and the four corners and it just repeats and goes back to the beginning again.
Please Help.......
i have a big problem my friend lent me an 02 xda exec. i hard reset it n now the problem is that whenevr the phone starts it says tap on the screen to setup ur windows mobile phone....but the screen tap is not working the keybaord is fully functional except the start menu i.e the window icon key and the i cannot tap on the screen with the stylus....please help :S ...though i can recive n send calls use all the rets of the keyoard but the touch screen doesn't work i can see everything clearly but the only problem is the tap input!
so hard reset it again and go through the setup properly.
buzz
Hi,
Maybe your alignment is out. ie your screen taps are off the mark.
Realign your screen (maybe with a hard reset like they say).
Just a thought
Michael
On a side note, I noticed a little "backdoor," if you will, when the initial Windows Mobile calibration and tutorial starts up - press the OK button and it will take you straight to the Today screen, but since the touchscreen hasn't been calibrated, it performs totally wacky when you touch the screen.
Of course, you can use the keyboard to get to the Settings panel and go to the Screen applet and recalibrate it from there.
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
cyrus994 said:
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
Click to expand...
Click to collapse
do a HARD RESET... push the little buttons on the keyboard that are dashes. They are to the left and right of the send and end call buttons. While holding those down reset the device.
So to repeat... DO A HARD RESET> am i missing something?
Cyb
i did a hard reset but still does not work
i did a hard reset then a screen appears after a i press 0 that says Tap here to setup your windows mobile phone. But when i tap on it nothign happens :S
Faulty screen?
i had same problem, just had to many hard resets, also take the battery out for an hour or two
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.
Hi!
3 days ago my Note II started acting weird: About 50% of the time my note didn't respond to my touch (finger), which only increased as time passed by; it's unresponsive 99% of the time now. Funny thing is that the stylus (probably due to the wacom digitizer) still works.
I tried a factory reset and erased the cache. A hard reset is not possible for me, as the "hard buttoned home button" doesn't work (for months...I destroyed it when I repaired my screen and glue got stuck). U use a soft home button now, which works fine (except for hard resetting of course).
When my phone's screen is black and I want to turn it on, the ripples on the 'lock' screen show up spontaneously in the center of the screen (those ripples that normally follow your finger motion). This led me to believe that it might be a hardware, rather than a software problem (something with a slightly bend screen, causing a pressure focus on site?). I tried manipulating/bending the screen (to an extend ofcourse) without effect.
Further info:
-I dropped it about 4-5 days ago; worked fine after that
-I use extra batteries for a quick change if one's depleted (dunno if that's relevant): using the original battery doesn't fix it
-Didn't recently install new software (well..unless you count reinstalling important software after factory reset)
-I feel like the time it takes my note to 'turn on' after being idle for a while (you know; the black screen that turns into the 'locked screen') is slightly longer, even after the factory reset.
My question is: Does this sound familiar to you? Is this a fixable problem (and how )?
Thanks!