stuck on align screen qtek 9090 - MDA III, XDA III, PDA2k, 9090 General

Anybody could pls help...
On my qtek 9090 I've a screen little broken and tap screen is not workin on down-right-side, but everything else works ok...till now
I had a hard reset and at the begining I should perform the align screen...but as in some places taping is not working it continues to ask me for align screen! I tried to do it by other keys but nothing!
Now I'm stuck at align screen!!! How could I move on???
Thanks in advance
:shock:

Stuck on Align Screen
Me Also,
Reset the device after an upgrade.
Asks to align screen - I do the middle and the four corners and it just repeats and goes back to the beginning again.
Please Help.......

Stuck on Align Screen
Me Also,
Reset the device after an upgrade.
Asks to align screen - I do the middle and the four corners and it just repeats and goes back to the beginning again.
Please Help.......

Related

Screen problem...

I seem to be having a screen digitiser problem lately...noticed it when I first got my exec where it wouldnt acknowledge any screen taps at the align screen part of the hard reset. Got it working after a few soft resets but now screen taps dont seem to be acknowledge in either portrait or landscape mode. I have noticed that if I press slightly on the right hand side of the exec it brings up whatever is on the right softkey, which is weird. I need some feedback as to whether this is a harware fault or not. Tried flashing to the most latest O2 firmware and still the same thing. Also finding that even after switching off and then back on again, I'm having the same problem with stylus taps not being accepted anywhere on the screen only after maybe 30 seconds. Any help much appreciated. TIA

O2 XDA IIs stuck in boot

Hello.
My XDA seems to be stuck in the bootload process. When I try to boot it, it brings up the RGB screen with the numbers and letters in the bottom right corner, and then stays there indefinantly. I tried the whole reset while holding record and camera, but now I just have a white screen, and it's doing nothing.
Is it possible for me to flash the ROM from this state? How do I go about fixing this problem?
I appreciate everyone's speed and reply.
Cheers!
Scratch that. Just needed a hard reset.

SX-66 can't get past the align screen, please help

I had to reset my SX-66 and now i can't get past the align screen. Actually i got past it once but then the "next" button did not respond so i have no access to my phone, what should i do?
Try this - its a util that allows you to skip the alignment screen.
http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
http://www.codefactory.es/mobile_speak_pocket/msp_downloads.htm#5

Touch Screen Problems

My Touch screen won't align.When I hit on the target, it doesn't rotate to the four corners of the screen as it would normally do. When I tap on the lower right corner of the screen, the target marker will rotate to the four corners of the screen. It ends up not taking me to the Today Screen. I'm confused on what to do. I got to this point becos I had to hard reset the phone when the stylus won't respond.
Any suggestion will be so much appreciated.
Collins
What unit?
What unit do you have make/mdl? This info will be needed to help!
As far as a hard reset to get it working ??? I don't think it should have needed more then a soft reset? Unless the touch screen is broken!
Thanks for the concern.I have a vodafone 1620 PPC,

Stuck on Align screen (tapping works)

I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.

Categories

Resources