Any help Pls???
a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?
I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.
arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.
arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam
Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.
Hello, I've successfully installed WM 6.1 (Kavana / Ricky 318 version) on my Excalibur.
But I have a lof of problems with my French keyboard.
I've tried a lot of things, according to info inside the forum... but it still does not work
1. I only have XT9 on my S620, no ET9 (only 10 languages, without French)
2. The keyboard mapping is not correct
Could you help me with a simple solution ?
Thanks in advance for your support
Ok I've found a first solution : the ET9 multi-language pack is on Mondaco
http://www.modaco.com/content/HTC-Excalibur-Excalibur-MoDaCo-com/255603/Excalibur-eT9-Language-Pack/
The AZERTY keyboard mapping (also on Modaco)
http://www.modaco.com/content/HTC-Excalibur-Excalibur-MoDaCo-com/256039/WM6-Rom-and-keyboard-layout/
And a nice tutorial to explain everything
http://www.modaco.com/content/Smart...obile-Smartphone-Internationalization-Issues/
very useful post, thank you
Just what I was looking for, thanks a lot for sharing the information!
Uups, after installing the language files, my sym and caps button stopped working. Anybody else had this problem?
I'm trying to change the Qwerty to Qwertz and already had some results... Read the Thread and maybe you can help to finalize this...!!!
Greatings Mievalt!
Hey
How did ou do ?
I'm trying to get a AZERTY for myself (French !)
Let's provide the info so that I can cook a AZERTY ROM
Thxs in advance
First of all it seems that there is a problem with touchscreen and mouse I'm trying to fix that but no promises.
You have to replace all files of the zylonite_keypad_Us.dll including the S001, S002 etc. files.
Do the same with the consHID.dll files.
My Keyboard layout is now qwertz but as I said there are still problems with the touchscreen and mouse. But I think we are quite close...
I need to replace these files by the same ones from a French ROM I assume ?
Yes thats correct!!!
It is very curious...
I've managed to change the qwerty keyboard layout to qwertz, and first the touchscreen works fine, but when use the mouse button for the first time I can only use the touchscreen to click where the cursor is...??? Sounds as stupid as it is???!!! It seems that the "old" German Rom I use doesn't really come along with the new mouse driver that can hold the tap....
Does anyone know a solution or can assist??? The zylonite_keypad_Us.dll seems to be Samsung-made. Maybe someone with more experiences can say if it is possible to change some parts of the file and which!!!!
What I will try tomorrow is to use a ROM that doesn't have the new mouse driver... Maybe I get some results!!!
Hi. i have the same problem, i update with an Italian ROM (I live in Ticino). I have understand that i have to replace the zylonite_keypad_Us.dll but what ist the right file that i have to update ? And where can i find it ? Grazie.
I tried several things... and found out that its all about these three files:
zylonite_keypad_Us.dll
conshid.dll
compime.dll
with all there S00x files.
But by just replacing them your touchscreen and mouse screw up....
I'm trying for days now but can't fix this problem... EFN meant we need other Language MUIs, so replaced some but also no results...
Hi,
I've done some searching and tried a few fixes but I can't seem to get the right mapping on my keypad. What I've done so far:
1. Installed Tegic eT9 US English.CAB
2. Used Excalibur eT9 Changer to set to US Keyboard
My keypad works normally but the FN keys like ! are mapped to an AZERTY keypad. Am I missing something? If there are any easy fixes that'd be ideal but I am comfortable creating a custom keymap if necessary (links to how to do that would be nice )
Using WM 6.1 . Any help appreciated.
Here download this, it should fix your problem... Also, restart your phone after installing it...
Here it is
That fixed it! thanks!
No problem man, always willing to help out
I search all forums but ı didnt solved this problem. Plesase help me about this problem. ı changed fonts but the problem is still ongoing. sms inbox didnt show turkısh character ç,ş,ı,ö.. . how ı solve this problem.
thx for help.