here is a new post cause the old post were to heavy
( link to the old post )
ok on the preview post some info was that it is possible to have the name display work with the name display ( here are a confirmation on the rogers site )
so it should be on the ext rom
does someone know how to extract it from it .. and does some one know if their is different version of the ext rom of rogers .. cause one version of the rogers is on the wiki
note: the rom from rogers is a WM5 ... that might be the problem ....
thanks
here are a explanation for the one who do not know what is it
Name Display is a new service that allows you to see the names of national landline callers as well as Rogers Wireless and FIDO callers, even if the person is not in your address book!
fido offer the same
fido is owned by rogers
Anyone that can extract the full registry from the original rogers tytn/hermes will be much appreciated as well.
nitrocell said:
Anyone that can extract the full registry from the original rogers tytn/hermes will be much appreciated as well.
Click to expand...
Click to collapse
Ok I hav ethe Tytn with original rom and the functionality working, how do I extract? Tell me and I will do it.
Can we reserect this thread?
i have wm6.1 .. it's shadow ce .. i love it .
today i called rogers and had the caller id activated . i was excited! but it doesn't work on my phone .
must be because i have shadow ce and not the standard rom .
what can i install to activate the caller id feature?
thanx in advance
it is not on the extended ROM apprently.
There is another thread where someone installed the Rogers WM5 ROM and reset before the extended ROM was installed and Name Display still worked.
on another thread people have pledged money, but no go.
jinner said:
it is not on the extended ROM apprently.
There is another thread where someone installed the Rogers WM5 ROM and reset before the extended ROM was installed and Name Display still worked.
on another thread people have pledged money, but no go.
Click to expand...
Click to collapse
you know what... the rogers Tytn(hermes) comes with wm5 .. but the rogers Touch comes with windows wm6 .. and name display works .
so can we install the wm6 from the rogers touch onto our hermes?
i'm on a kaiser now . but still interested in getting caller id to work .. so just to test, i put back the Rogers WM5 standard rom on my hermes.
I tested with two roms:
- Rogers ELF RUUUpdater-V2
- Rogers WM5 RUUUpdater-V2
Even though i have Name Display activated through rogers, i was not able to resurrect it's functionality by flashing to original roms .
this causes me to beleive the support for this feature is in the radio shipped with rogers.
Well, you are absolutely right aliencurv....it is in the radio.
I can't believe how many threads on the subject that are not concluded. (Maybe some people know the answer but just didn't post it)
I guess the problems is us, Canadians.
Anyhow, I managed to work rogers name display on my Hermes. I had been using CRCs 13.1 (absolutely great ROM, thanks a million). I found and downloaded original Rogers ROM (from ROMbaker) and flashed the Hermes. Name Display (CNAP) didn't work.
Then by accident I found this radio:
http://forum.xda-developers.com/showthread.php?t=323957
Updated the radio and I am in business. Name Display works.
I posted this because
1-I wanted to help fellow Canadians
2-I am hoping to get help from experienced members to make this work on WM6.1
Impatience....
Here is what I did while waiting a response.
First I downloaded ROMDonalds kitchen tools
Unpacked CRCs 13.1 and Rogers original rom.
Copied ril.dll and rilgsm.dll FOLDERS from the rogers dump folder to CRCs dump, repacked the rom and flashed my hermes. Phone turned on and connected to the computer but screen was pure white. Nothing was visible.
Then I copied only rilgsm.dll FILE and packed the rom. Phone turned on normal but no name display.
Then I copied ril.dll file. Same as above.
In each case I also created the registry settings under HKLM/.../RIL that exist in Rogers ROM but not in CRCs.
This is what I could do as a rookie. Any experienced person's help would be highly appreciated.
Related
I have a Blue Angel as mentioned in my signature and I have what I believe are all of the files needed to try and install WM2005 Build 14326.0.0.0 onto it.
Here are the WM2005 files I currently have:
HimaUpgradeUt - 512KB - 5/5/2004 4:54PM
nk.nbf - 32,769KB - 3/21/2005 9:08AM
And the following came from my existing ROM:
ms_.nbf - 16,833KB - 2/3/2005 7:45PM
radio_.nbf - 4,097KB - 2/3/2005 7:45PM
I also have a good copy of ActiveSync Beta 4.0.0 and have all of the instructions that were made in the main WM2005 post for installing on the Himalaya and I'm assuming it should be the same for the Blue Angel.
My device info currently reads:
Model No: PH20A2
Windows Mobile 2003 Second Edition Version 4.21.1088 Build 14132
ROM Version: 1.36.00 WWE
ROM Date: 01/13/05
Radio Version: HA00_140
Protocol Version: AA3.3.301
ExtROM Version: 1.36.110 WWE
Hardware Version: 0041
This is what it came with out of the box, I have not installed the updated ROM Audiovox released the day the phone was released because I have never had a single problem and some people who upgraded reported problems and that some files were a day older than the version that shipped in the original ROM.
-------------------
Now my 1st question, the newest updated ROM installer package from Audiovox which was released 3/4/2005, has a different version of the upgrade utility, it's called "HaUpgradeUt - 424KB - 12/23/2004". The package it was included in from Audiovox's website was called "HA_SPCS_13600_113_00140_6600". Which upgrade utility is the best to use or does it not matter?
Now my 2nd question, has anyone yet tried this on a Blue Angel? Is there anyone here who really knows thier stuff who is willing to help me if I get lost or screwed up so I can be the Blue Angel WM2005 test pig?
Thanks!
hi
i have a pda2k with 1.33 rom and radio rom 1.08 and my cooked rom
i tried the upgrade but got the device authentication error.. tried it with the explained patch and the other method in original wm2005 post.. the himupgrade starts the procedure and then stops after some time saying an error occured..
but you go ahead and try it..may be you will do something differently and will succeed..
note: i have tried the xda 2 SE rom and imate jam rom and almost tried the alpine rom on my pda2k.. there is nothing you cannot revert back from
just incase if you are curious what happened after the above roms..my device didnt boot.... no problem...just unplug the usb port of the cradle and run a wwe rom made for xda 2s or pda2k ...everything will work then!
good luck..
keep us posted!!!!
in the above post: i mean unplug usb then replug usb and then run the BAupgrade utility....
can you upload hte 1.36 rom you have??? does your device have wifi and camera???
thanks
zohaer21 said:
tried it with the explained patch and the other method in original wm2005 post.
Click to expand...
Click to collapse
Where is the post for this "explained patch method" you are referring to? Also I'm considering the post titled "Microsoft Windows Mobile Version 5.0 I can share" as the original WM2005 post so we are on the same page in our thinking on that one.
The ROM is a free download from Audiovox, I guess I could upload it though.
I'm assuming the BAupgrade utility is on this site for download?
My device does have the camera but no WiFi, it has EV-DO instead. It's a CDMA phone, not a GSM phone...
your running the Verizon EVDO version of the the BlueAngel a CDMS 1xrt yada yada device. Most new ROM images are made for GSM phones then latter altered to talk to CDMA modules. In this case I think ot only would you not have a "good" experience but would warn against it. Second BlueAngel devices have OEM driver for the slide out keyboard. You will most likely loose for sure its use with this new OS. This is why the only devices it is worrking on right now are non-hardwired keyboard devices. Also there seems to be a notable diff in the hardare implimentation between HTC based devices. What software might work with one may not at all or damage another. Sorry for the down news but I think unless you have a keyboardless device I would not recomend playing with it. Just my 2 cents.
What you can do though is grab some of the elements (image files) from the new OS in other threads here, and overwrite the files on your device. Kind of like adding crome package or racing stripes. still the same car, just feel new :wink:
Thanks for the input. I'm running the Sprint version, not the Verizon one, same difference though pretty much, lol. 2.5G Vs. 1xrt and both have EV-DO, and then of course the frequency of the Verizon digital and Sprints PCS, but yeah both CDMA
I really couldn't care less about the keyboard, I don't even use it, never really have. Honestly, I work for CompUSA and if this thing gets buggered up I'll just exchange it out. I'm going to do a full backup tonight, hard reset, dump the existing ROM and then start the process just for grins to see how it goes. As long as it's not dog slow, text messaging works and email along with voice functions I'll be happy as heck. It'll atleast be fun to screw with and then I can always go back later.
I'm still unclear on some things like the country code and stuff that was mentioned in the other posts. Once I know I have all the facts and all of the files I'll give it a try and post back here. I'm off Sunday, Monday, & Tuesday so I'll have 3 days straight to play. I have to say my only real concern is it working with the CDMA radio which hopefully it will since I have a good copy of the latest Radio ROM for it...
hi 92GTA
yeah were on the same page..
wm2005 i can share is the original post..and i think page 10 has the answer (im not entirely sure though the post has now 17 pages!!!)
@ 92GTA : can you share this 2k5 ROM ? can you upload to a ftp and give us a link
bad :
read properly : he WANTS to install WM2005 on his IIs.
Why should you people go around risking your devices like this?
It's like putting diesel in a petrol car..things will screw up...
The 2005 upgrade currently available is only meant for XDA II devices, not IIs or II mini...or whatever. Hardware differences will render your efforts rather futile save for a massive hack.. Sigh.
indecided said:
Why should you people go around risking your devices like this?
Click to expand...
Click to collapse
dude what the hell is indecided..its either undecided or indecisive
the latter being you :twisted:
already tried this guys, it doesn't work, the bootloader cannot read the CE image, nd therefore hinders the device useless, but i managed to flash back to 1.31 and all is working now.
Hi Guys,
Im here with the same question,,
Can we really upgrade XDA IIs to WM 2005... or anyone haas done it.
someone said we shouldnt do it,, can I ask why?
Thanking you for your time.
hmmm...
Has anyone found a way to get WM5 to work on a blue angel??
I am new to windows ce,
however i have written a disassembler for windows ce arm executables
(dunno if it is of any use for this?)
and i am not affraid to develop more
if there is anyone who has any idea how to go about making wm5 work
i'd be glad to help
(ps i have an imate pda2k)
Friends the help, at my friend phone the Blue Angel is necessary, necessary WM2005 on it can to help to send? Write on
[email protected]
ISQ 1366613
Bobi1 said:
Hi Guys,
Im here with the same question,,
Can we really upgrade XDA IIs to WM 2005... or anyone haas done it.
someone said we shouldnt do it,, can I ask why?
Thanking you for your time.
Click to expand...
Click to collapse
you can find all the upgrade information at the following thread:
http://forum.xda-developers.com/viewtopic.php?p=138733#138733
............... ??
92GTA said:
zohaer21 said:
tried it with the explained patch and the other method in original wm2005 post.
Click to expand...
Click to collapse
Where is the post for this "explained patch method" you are referring to? Also I'm considering the post titled "Microsoft Windows Mobile Version 5.0 I can share" as the original WM2005 post so we are on the same page in our thinking on that one.
The ROM is a free download from Audiovox, I guess I could upload it though.
I'm assuming the BAupgrade utility is on this site for download?
My device does have the camera but no WiFi, it has EV-DO instead. It's a CDMA phone, not a GSM phone...
Click to expand...
Click to collapse
Sign me up too, CMDA but my has 1x instead of EV-DO. I would be willing to try it.
Where on Audiovox is the 2005 rom?. All I've ever seen are the 2003se updates.
Does anyone have an original ROM for the MDA pro?
Thanx
I am also searching for this rom. Who can help? needs to be original dutch rom.
dutchs roms
did you update your mda pro? To which rom version? I tried 2 update my dutch Tmobile mda pro but got a 120 error (language error).
http://forum.xda-developers.com/viewtopic.php?t=29354
http://forum.xda-developers.com/viewtopic.php?t=29354
Here's the way to update your ROM to imate but we still haven't gotten to the original rom. "Anyone??"
MDA pro
Please can anyone with the original NL ROM make a dump and upload it
Thank you very much!
it seems that the mda pro has d2s commands turned off. So the device is locked from getting image dumps.
At least I have no clue how to make one with the current tools.
btw. How can you make a extended rom that can be used with the upgrade program. I want to revert back to my original rom, but it seems there is no possible way to do it.
Does anyone know the gprs settings for the mda-pro as it is not entered in the imate image.
ps I have the mda-pro dutch version.
JaySea said:
it seems that the mda pro has d2s commands turned off. So the device is locked from getting image dumps.
At least I have no clue how to make one with the current tools.
btw. How can you make a extended rom that can be used with the upgrade program. I want to revert back to my original rom, but it seems there is no possible way to do it.
Does anyone know the gprs settings for the mda-pro as it is not entered in the imate image.
ps I have the mda-pro dutch version.
Click to expand...
Click to collapse
GPRS settings:
Go to start -> Settings-> connections->advanced tab->select networks->then edit.
Then select New, Enter a name for the connection. The modem must be GPRS, 3G.->next->access point name is wap ->next-> username is tmobile and password is tmobile -> advanced-> servers -> select use specific server address -> enter at DNS 10.10.10.10 -> click OK button top right -> select finish.
thank you. I wasn't sure about the password
Signed_UNI_TMONL_Conn_112101
Signed_UNI_TMONL_Conn_112101.cab
I used this cabfile it contains the settings!
how can you get these back:
- T-mobile splashscreen
- contacts actualy working when you add one
- t-mobiles favourites working
- t9 dutch
Signed_UNI_TMONL_Conn_112101.cab
GPSenzo: Were can i find this cab file ?
simba: after the settings i still can't connect, everithing seems to work but ever page i enter it says page not avalable
smasma said:
Signed_UNI_TMONL_Conn_112101.cab
GPSenzo: Were can i find this cab file ?
simba: after the settings i still can't connect, everithing seems to work but ever page i enter it says page not avalable
Click to expand...
Click to collapse
Try a different settings.
Create a new connection.
Now use the following settings:
Access Point Name: internet
username: tmobile
password: tmobile
Do not change or enter any server settings.
Simba, i think i love you !
ITS WORKING AGAIN, i was almost ****ting my pants, because of the settings, GREAT THANKS.
:wink:
smasma said:
Simba, i think i love you !
ITS WORKING AGAIN, i was almost ****ting my paints, because of the settings, GREAT THANKS.
:wink:
Click to expand...
Click to collapse
What? You were ****ting in your tins of paint? :roll:
hollinshead, i have to watch you, you are as sharp as a knife
thanks for the remark
hehe!
Sorry, I couldn't help it, you have to admit, it was a rather funny typo! :lol:
OK I see most of the guys are dutch so I can ask...
I want to change the ROM of my Dutch MDA-PRO unlocket with KPN subscription to the JASJAR ROM, is it risky and does it work wel.
What is missing in the JAS JAR ROM, like maybe the Dutch t9 or any other settings does the video call work ?
What happens if there is a new JASJAR ROM will it symply install or do we have to patch things again ??
Rom Change
Churchill Why don't you ask WIZ and BarnOwl they know the ins and outs.
Good Luck
Actually, I don't know anything yet about the differences between the stock MDA rom and the Jasjar rom published here.
Except the fact that it has a slightly higher rom number, that is......
And because my stock MDA Pro is one of the most stable phone edition devices I used so far there is no reason whatsoever to change to Jasjar rom and void my T-Mobile warranty completely.
If there is a way to make a complete rom image then the situation is different ofcourse. But I have not found a way to do that yet......
I recently upgraded my O2 Xda Exec with the imate JJ rom (ROM Version: 1.30.82 WWE). But after a hard reset, I keep getting the following error:
Code:
Can not run on this device.
Upon investigating, I have discovered that the pocket arabizer cabs are installed during the customization after a hard reset. The similar rom (and the mentioned cabs) are working flawlessly on my other universal (imate jasjar) but on my O2, i keep getting the above error (i.e. can not run on this device). Is there a way to get the arabizer cabs to working nicely with my O2? Help in this regard would be appreciated.
help, please help. just say something. just kiddin'
hopefully, someone will come along and offer some valuable help.
T-Mobile is doing the same thing
My T-Mobile MDA Pro is doing the sme thing, it must be a way to tell the ROM that my T-Mobile is a JasJar...and I have used the "no_ID" and it did not work...
HELP
The imate roms (dont know if only from the Jasjar) have something builtin (don't know if cab file in extrom or in the rom itself) that only allows installation on imate jasjars. I think its some sort of list or program which checks the imei.
My observations so far are:
1. I have tried a custom extended rom, specially designed to avoid any cabs that might check the imei. This meant using a custom config file and autorun file from O2.
2. Only IMEI checking cab I have found so far is the 'Default_CAAVPPC_IMEI_2.6.80_range.cab' -- it is CA Antivirus software. I think it checks the IMEI.
3. I have tried with certain telco provided cabs (e.g. Mobily, Etisalat_UAE, etc.), to see if this works. It doesn't.
4. What does Install_tsk.exe do?
5. I have tried with different rom, but extended rom from imate JJ, but that doesn't work either.
6. Is there a way to fix this problem? I have seen this problem with several other people in this forum, but no concrete solution is found yet.
7. Can somebody else confirm that, indeed there is some IMEI checking in the imate roms?
8. being able to use the imate JJ roms on O2 indicates that there is no IMEI checking in the ROM itself.
9. Help is desparetly needed. :roll:
S.D.
JasJar on T-Mobile
I have tried everything since I got my T-Mobile and I installed like 100 ROMs trying to make my T-Mobile MDA Pro thinks that it is a JasJar...but no luck...
I have installed the WWE JasJar with no problem, I think the problem is installing the ME version with Arabizer and the AntiVirus software...and yes it does check the IMEI number...
My T-Mobile now officially an O2 but it seems like it refused to think that it is a localized version of the iMate JasJar.
Is there a way that makes my T-Mobile thinks it is a JasJar????
this seems to be an issue with a lot of people. can we have some experts to help us out?
IT CAN NOT BE DONE...SORRY
somedesi said:
this seems to be an issue with a lot of people. can we have some experts to help us out?
Click to expand...
Click to collapse
I think that the "Arabizer" developers had locked in the software to work only on the iMates...with specific IMEI numbers, I have installed the WWE ROM on my T-Mobile and it works fine but when I install the ME ROM it does not work...
I AM GIVING UP...
Has anyone with this unit on Rogers been able to apply new themes? I've tried a few, but can't get them to work.
Now it is possible i'm just doing this wrong, and if so, does anyone have a site with some themes they know will work?
THanks.
M
Are you running the rogers version (s621) or an unlock dash model (s620)?
windsorguy13 said:
Are you running the rogers version (s621) or an unlock dash model (s620)?
Click to expand...
Click to collapse
I have the s621. I'm not sure about unlocking it. I'd like to avoid brickin' it.
copy this file to your phone, and then run it - got this from their website.
That link you posted is to install Root Certificates for self signed or wildcard Security Certs. I work for Rogers and have extensive knowledge of this device, and the problem is that Rogers application locks this device. The only way i could get around this stuff, in order to edit the registry, install unsigned applications (themes included) was to install the T-Mo release of WM6.
Uhm, I don't think that's true. I installed this cab, and used the SDA unlocker, and I can edit the registry, install software, change themes, etc. I don't have the tmobile ROM.
froesei said:
Uhm, I don't think that's true. I installed this cab, and used the SDA unlocker, and I can edit the registry, install software, change themes, etc. I don't have the tmobile ROM.
Click to expand...
Click to collapse
Same here. I just got a Rogers s621 and have been installing everything with no locking issues whatsoever. So Rogers did not application lock the device they sent me.
can anyone with the Rogers HTC s621 post the ROM. I'm trying to enable Name Display feature to work with all cooked roms.
My S621 seemed to have come application unlocked..
I got it just the other day, and installed Facade, and a few other programs.
But its weird, it seems like it was application unlocked for the first...5 programs or something
Got to PocketNester and Mobile Office and it gave me the insufficient permissions error.
I grabbed the SP_AllowCertificateInstall.cab file from this thread, ran it and was able to install Nester and MOffice.
I CID unlocked my T-Mobile Dash I got, Ran the rogers WM6 rom and installed fine.
I coudlent install any applications though and came across this post. Ran the Rogers Cert cab file and then sureal unlocker which auto edits the registry and installing applications perfectly.
This is a awsome find.
Name Display on an unlocked TyTN with Rogers...
. .
Guys,
I need your advise...
I got an unlocked TyTN ROM:3.54.255.3 and Radio: 1.48.00.10 (Non-Rogers); I could not get the Name Display to work on Rogers.
I came accross this thread and I'm wondering what to do?
I'm wondering is there like a cab file that we can run to set the registry for a TyTN?
Can anyone post the link to Rogers WM6 ROM for TyTN?
Thanks
hmichael_lucent said:
Can anyone post the link to Rogers WM6 ROM for TyTN?
Thanks
Click to expand...
Click to collapse
Found
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
Hi everyone,
I picked up the Softbank X02HT but it came with the Chinese ROM.
Since I'm using it in Japan, I'd like to switch over to the Japanese ROM.
I wasnt able to find the Softbank Japanese ROM anywhere online... perhaps someone had a suggestion?
Thanks for your help!
also very much interested in that
i am in a similar situation and already posted several requests about switching my Dopod ROM to a Softbank one or at least get all the important functions of the Softbank ROM working on my Dopod 730...but so far no reply.
if you receive any enlightenment please share it with me.
cheers
beefandcorn,
Im in the same boat as I picked it up in HK to use here in Tokyo
kinda ironic how it was setup to use here and now it only partially functions.
I cant seem to find a ROM anywhere for it as well
some of the settings from the X01HT will work.
Im tempted to go to softbank and get them to reflash it back but i have a feeling ill get busted for having an unlocked one.
The keyboard layout is f'd up not all the keys match, I can send SMS but cannot receive, and I cannot access internet via 3G...
What is your experience like so far in Japan for the dopod rom?
Using foreign ROM on Softbank network
Actually, I’m also using the HK ROM on the Softbank branded X02HT in Japan.
SMS and 3G Packet service works okay but it seems the MMS is impossible to get working.
Just to confirm, here are my settings for internet access.
In “Connections”, I have a connection that “Connects To” “The Internet”.
The access point is “softbank”, the username is “[email protected]” and password is “softbank”.
In “Proxy”, I didn’t have anything setup.
This is the paid packet service, where you pay per use.
I think you also need Softbank to have your plan include “packet service”.
It looks like you can also setup the flat rate internet service but I haven’t tried that.
Sorry, I’m not sure about SMS issues.
Is it possible to dump the ROM from a retail Softbank X02HT?
Then, we could flash the official ROM onto the phones and all the problems go away.
Hope it helps…
i agree
yes if somebody could provide a ROM dump of the softbank rom that would help... well also need to figure out HOW to flash it then...
The company I bought my phone from (mail order from the US) offered me to reflash the phone to the Softbank ROM but it is not cheap and I also would need to send it back to the US for that (and pay for the DHL/UPS costs)
So I would prefer doing it myself (if its not such a hassle)
Yea. I got my X02HT in HK, and although everything works fine here on AT&T, I'm having an issue with remembering where some of the symbols are.. since some of them don't match up... any luck finding the Original ROM?
It seems that the original Japanese ROM also has English. and I would assume that this ROM maps the Keys correctly... as opposed to the Dopod ROM installed now...
Please HLP w/ Tmobile WIZA200 in JAPAN...cant get signal
I'm starting to think there is no solution I have unlocked and uploaded and reloaded and re-unlocked, etc but still the same problem...My phone can not access the cellular network. I did a manual search and my phone does not acknowledge the JP Softbank network. I have put different kinds of ROM's and OS upgrades, etc, but still no success. I'm starting to think that these great unlocked PDA's only work in Europe and North America and not in JAPAN.
I have seen several other threads with others having the same problem so I am going to try to ask this question in several different threads.
I have no errors and everything works fine in the process, just like everybody says it does, but still nothing for acquiring a signal. It just either shows an exclamation point or searching dots. I have compared the various carrier options on my phone to other Softbank phones and everything is the same networks except acknowledging the Softbank network.
I'm praying there is some smart person out there who can figure this out...PLEASE...PRETTY PLEASE...
Works on DoCoMo but NOT on Softbank
I also have a Dopod ROM and funny thing is, the phone works like a charm on the DoCoMo Network (Phone and SMS) but when I pop in a Vodafone SIM it cannot even connect to the Softbank network
Very Strange...
we have a thread going on this issue and maybe you can add some input.
http://forum.xda-developers.com/showthread.php?p=1942813&posted=1#post1942813
I had a Softbank X02HT. Stumbled my way thru a DOPOD "cook (?)" and used it in Australia and Guam on GSM. Came back to Japan, threw in the softbank card...CHANGED THE NETWORK BAND...to Japan and AUTO. Worked perfect on DOPOD ROM. No 3G. I am working that right now.....
anybody dumped the rom yet???
This is the Softbank rom from X02HT
First Boot screen show "Test Only Not for Sale SOFTBANK" Just ignore it....hopefully when done with cooking WM6.1 with softbank rom, kindly erase that Boot Screen.....
Hopefully Anyone can make X02HT Softbank rom WM6.1.....Please share......
heres the link......
http://rapidshare.com/files/149405794/RUU_Cavalier_VF_KK_1.20.761.4_1.46.50.10_182_Test.exe
P.S.
cruzzmz really donno to upload it to ftp em sorry dude....
wowwwwwww I don't know how, but this ROM worked for me!!! The ****** SIM Locked message dissapear! Now, I can put a unlock code for my cell..... I'm going to see how (Any suggestion ?)
Thx!!!
What do you recommend me... still with this Softbank rom or install a Dopod (One from the fTP)?? I need english language!
pls wait a lill bit
ppls pls wait a lill bit more since i am on a long vacation now. ive dloaded the softbank rom. ive dump it & will cook a wm6.1 on it soon. just one catch though the chome screen will b in english i think hv to cook & try it on my dopod 1st ... will keep u all posted
cruzzmz said:
ppls pls wait a lill bit more since i am on a long vacation now. ive dloaded the softbank rom. ive dump it & will cook a wm6.1 on it soon. just one catch though the chome screen will b in english i think hv to cook & try it on my dopod 1st ... will keep u all posted
Click to expand...
Click to collapse
Can anybody tell me is it fine if i run this rom on my x02ht without running anything else first?i mean any spl thing required?any did the enter the unlock code screen really appeared?
ipratik said:
Can anybody tell me is it fine if i run this rom on my x02ht without running anything else first?i mean any spl thing required?any did the enter the unlock code screen really appeared?
Click to expand...
Click to collapse
Yeah dude! Try it, at least, it worked for me. Now I can play with the WM registry and those things that was unavaible after.
Good luck
caza00 said:
Yeah dude! Try it, at least, it worked for me. Now I can play with the WM registry and those things that was unavaible after.
Good luck
Click to expand...
Click to collapse
yes!!!!!!!!!i tried and it went with no problem. thanks for showing the way ...and atleast now there is a space to put the unlock code...good luck with your newborn x02ht. and the internet settings are also in place. so can use softbank unlimited plans...
Did you try to install another ROM, a Dopod ROM or something??
I wanna try one but i don't know if it is a good idea or not ...
caza00 said:
Did you try to install another ROM, a Dopod ROM or something??
I wanna try one but i don't know if it is a good idea or not ...
Click to expand...
Click to collapse
no. i didnt try anything else as i didnt have time and was quite satisfied with the softbank rom. but yes the network seems to be weak compared to the original rom.