I all geeks !!
Humm , I just try to install the ayaya VOIP software called " One-X" link is here on my fresh Hermes WM6 upgraded.
This apps worked fine with Wm5 but does not installed properly on Wm6 because of missing valid certificate.
Is there a way to install it without this certificate checking or is there any kind of workaround
Thx for your suggestions
Maybe my question would be what about the changes between wm5 and wm6 regarding the certificates validation
Anyone to answer ??
Theres a cab file called sdkcerts.cab running around in this forum. Install this cab and then try it again with your application.
Thank you for your answer.
I'll try that this evening...
I'll keep on touch.
I've tried as well with sdkcerts.cab installed, but still have the message on the picture attached... Anybody has any clue ?
Related
Hi
I've recently upgraded to TMOB 1.72 but thanks to DCS's guide, now managed to install the new o2 rom released this week.
However, if i now try to install the new apps such as Fonix Voice ial, it comes up with a message saying incorrect rom version.
Can anyone suggest anything? I've looked but although some people have had the same problem, noone seems to have put forward any solutions.
Cheers
Anthony
Have you done a restore since upgrading?
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
I've looked at the two setup files in the fonix2.0UK0527_O2Limit_20040901.sa.cab from C:\Program Files\Microsoft ActiveSync\HTC Apps and found the same O2 vs CDL in both files, when viewed in a hex editor. However I'm now stuck on finding a way to update or remake the cab file to try again. Does anyone have any suggestions on how to do this or if they had another plan? would it just be easier to downgrade to the official 1.66 o2 and then upgrade again? Also how do I check my version of Bootloader?
Many thanks
Anthony
Anton.Valleyman said:
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
Click to expand...
Click to collapse
What operator ID value did you use for the upgrade? Also, can you tell me what values are in your registry for HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM and HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM1.
My DeviceData file said CDL so I changed the .nbf file from o2 to that. i have got slightly further now in that the application tries to install but when it does, it says it cannot the various dll's etc. I think its a prob with the cab file generation, and i cannot find a program that allows me to add/replace the contents of the cab file.
Registry settings are
MSYSTEM - 1.72.181
MSYSTEM1 - O2_UK.
Thanks for your help.
OK, thanks for the info.
Just to update you...
I solved it in the end. I was having trouble with the .cab file because it was compressing itself rather than staying in its usual state. After changing the O2 setting to CDL in the settings files within the cab, and recreating the cab file before sticking it on the phone, it worked fine.
Cheers
Anthony
Please Post modified cab
Could you please post your modified cab?
I am having the same issue trying to install Fonix VoiceDial on the T-Mobile Final 1.72 Rom.
Thanks.
oops, I think i deleted it. I don't have access to it here, but I'll redo it tonight and send it tomorrow.
Cheers
Anthony
I'm having a problem opening the Fonix CAB file. It seems to be different from other cab files. Can you please post the modified one?
Thanks,
Sorry I forgot to redo it, I'll try my best to do so tonight and then I'll post it tomorrow morning.
Cheers
Anthony
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Edit: BTW I added a Dutch language Fax Coverpage as well
edsub said:
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Click to expand...
Click to collapse
Good work edsub. I wanted to look at this, but unfortunately my WinCE Cab Manager trial has expired (current version and previous version) and $149 is a bit steep.
yw, but the Fonix thing is still anoying me . . .Google didnt help either . . .
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
M4io said:
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
Click to expand...
Click to collapse
I couldn't agree more I am actually tempted to buy it though. I installed the newest version and once I used up the 15 executions, I found the previous version somewhere and installed that and that gives you 20 edits - and now I've used those up too Maybe I will email them.
Damn, and I remembered to bring it today as well.
Oh well, all's well that ends well.
Cheers
Anthony
I used the setup dlls from one of the cab's originally deployed on a T-Mobile ROM. I removed the setup dll that has 'O2' in its name.
Apparantly it's one of those new setup dll's that does the version check.
BTW In TrueFax I added a Dutch language coverpage
@Anton: Could you please provide the info on how you managed the Fonix cab to get installed.
I am trying to make is for general use and not just to change some version/operator name in the cab-file (which BTW is of a different type that usually)
hi plz any one who can made this cab work in a wm5 device it will be apreciable it for 2003 but it isent work for now in wm5 plz help
Does not allow to install CAB on WM5/6 Setup.dll.
I have removed it and now CAB is installed, but after installation it is necessary to make softreset devices.
does it install the DRIVER for the network card or only the certmanage???
edit also in my device shows me error unssesfull istalation any suggest
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Tried but did not work
Hello there,
I installed the Cab (install to: device) on my unlocked X02HT with dopod rom.
Turned the device off and on again but no change.
I am using FuseSP and PocketDOS and still both have this annoying numeric keyboard problem
Or does this hack only fix the Yahoo Go and WLS issues?
On my HTC S630 it fixed the problem I had with Yahoo Go, I really don't know if this fixes other apps (this should fix the input problems in the textboxes in .Net bassed apps, but I haven't tried any other) and if this works with other ROMs apart from HTC's one, I guess is just a matter of testing it.
The instructions that I have from that forum are:
- copy the .cab to your phone
- run the .cab with File Explorer to install it
- restart your phone (or shut it off, then turn it back on)
- it should work after that
It worked!
Hi,
I am using softbank X02HT with Dopod C730 ROM. This fixed the input bug with Yahoo! Go.
Thank you so much for this fix! I'm always grateful to smart ppl that come up with things like this!
Yus
does not work somehow on my x02ht dopod rom
as mentioned before i tried it with my x02ht with dopod rom. i did not try it with yahoo go but with other apps i had this numeric key problem with and there was no change...
funny thing is i can install the .cab file as often as I want to. It looks like it installs fine. And then just for fun if I click the cab again after reboot it installs it again. It does not tell me it is already installed even after installing it for the x-time. Is this normal? I tried to installl to device and storage card. no change.
Cheers
xsl777 said:
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Click to expand...
Click to collapse
It runs on my dopod c730.
How about Gmail mobile? I can input my username there...
anybody can help?
Worked like a glove! Solved problem of the apps that treats letters as shortcurts and dont write!
Thanks a lot
need yahoo go for c730
i need yahoo go for cavalier, is there any link to download this ?
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
gimbong said:
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=432946 and read how to app unlock your device.
Also these would be very helpful http://forum.xda-developers.com/forumdisplay.php?f=415&nojs=1#goto_forumsearch, http://forum.xda-developers.com/showthread.php?t=298893
Cheers
Anybody up to making a windows live cab from wm 6.1..
Windows Live Messenger Cab 10.6.0034.0800
Can´t install it
I got the cab but shows unsuccessful install...
do you have it working?
we actually would need the cab to check. this thread asks if anyone has made a cab for the new live? maybe you would be so kind as to provide it
For sure. Where is the cab?
I´m sorry for my bad English
Seems like I missunderstood the original post, I tought that the cab in Matt´s kitchen was the good one. Sorry for the confussion
I tried the one in Matts Kitchen and it worked fine for me. The problem is that it is Build 0600 and not 0700
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
TripleQ said:
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
Click to expand...
Click to collapse
Like to know this also..
My version: Windows Live (10.6.0033.0600)
The newest version of windows Live messenger is 10.6.33.0700 only found in Schap's WM6.1 Pro 4.40 Beta ROM. The Feature that appeals to me is that it has a dropdown box that gives you a choice of , Hotmail, MSN, and Live, . TNT says this will be in his new Wizard Rom Windows Live Messenger 10.6.0034.800, must be the newest, also Khans 2.3 Wizard version has 10.6.0034.800 with the drop down box.
Is it possible to make a cab file of the newest?
m0nkm0nk said:
Is it possible to make a cab file of the newest?
Click to expand...
Click to collapse
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
noellenchris said:
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
Click to expand...
Click to collapse
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager you can find it here
IM a naughty XDA member that posted warez!!!
NO WAREZ ON XDA
Mate, whilst applauding your kindness in helping out your fellows, I think you should edit and delete your post in case you get a bit of a hullaballoo started.
Mustn't post links warez like that on here, mods are quite adamant about it usually.
pashamangl said:
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager CeCabManager
Click to expand...
Click to collapse
Thanks for the response! I will look for WinCECab and give it a go. You can edit your post and remove the download links to the Warez... I wouldn't want to anger the Modz...
I can't wait to start dabbling with these cabs.....lol .... I'm sure I'll be Hard reseting a few times after I apply some of my new cabs....lol
Chris
what's new in new build ?
i don't have a time for creating a cab, but maybe the package will be useful for some of you to create a cab
attached, enjoy.
Well thanks TNT! It's a good start, someone will probably beat me to it though. I'm at work and won't be able to get to this till tonight or 2morrow.
Chris
Xda 2?
Does this one work on the xda 2? If not is there any msn i can install for it? Please help.
Thanks a million TNT
you are welcome
i want to tell that this build has many fixes with new features were not there in previous versions.
Hello All,
I'm searching for a way to update some drivers in the OEMDrivers. I manage to find out that it's not as simple as copying the file over... :-( But apart from that I'm missing the direction on where to search. I'm not that far advanced.
As a temp fix, I cooked up a CAB file for the driver I wanted to replace (gpsdriver.dll), but after I installed the cab file and making sure the new gpsdriver.dll showed up, my GPS stopped working? The same for the libgles_cm.dll which I want to try - fixed my TouchFlo3D good as in "Not starting anymore." :-/
I can't understand why this didn't work....
Any guru out there want to help a starting cook?
Nobody wants to help?
mario661 said:
Nobody wants to help?
Click to expand...
Click to collapse
You can't update drivers without updating nk.exe because drivers are hardcoded for exact nk.exe and in your situation you are trying to use new drivers with old nk.exe.
You can only update OEM drivers if you cook a ROM....
mario661 said:
Hello All,
I'm searching for a way to update some drivers in the OEMDrivers. I manage to find out that it's not as simple as copying the file over... :-( But apart from that I'm missing the direction on where to search. I'm not that far advanced.
As a temp fix, I cooked up a CAB file for the driver I wanted to replace (gpsdriver.dll), but after I installed the cab file and making sure the new gpsdriver.dll showed up, my GPS stopped working? The same for the libgles_cm.dll which I want to try - fixed my TouchFlo3D good as in "Not starting anymore." :-/
I can't understand why this didn't work....
Any guru out there want to help a starting cook?
Click to expand...
Click to collapse
you can't just overwrite it-- some of the drivers are written as modules so as mccune said it needs to be cooked, not copied
Now I know where I need to start looking/learning. I could not understand _what_ I needed, which makes it hard to find the correct info. ;-)
Thanks!
Im a pretty capable guy and tried cooking my own. Just went back to Duttys in the end. I believe hes putt he 2.00 drivers in 3.6b