Hi
I've recently upgraded to TMOB 1.72 but thanks to DCS's guide, now managed to install the new o2 rom released this week.
However, if i now try to install the new apps such as Fonix Voice ial, it comes up with a message saying incorrect rom version.
Can anyone suggest anything? I've looked but although some people have had the same problem, noone seems to have put forward any solutions.
Cheers
Anthony
Have you done a restore since upgrading?
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
I've looked at the two setup files in the fonix2.0UK0527_O2Limit_20040901.sa.cab from C:\Program Files\Microsoft ActiveSync\HTC Apps and found the same O2 vs CDL in both files, when viewed in a hex editor. However I'm now stuck on finding a way to update or remake the cab file to try again. Does anyone have any suggestions on how to do this or if they had another plan? would it just be easier to downgrade to the official 1.66 o2 and then upgrade again? Also how do I check my version of Bootloader?
Many thanks
Anthony
Anton.Valleyman said:
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
Click to expand...
Click to collapse
What operator ID value did you use for the upgrade? Also, can you tell me what values are in your registry for HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM and HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM1.
My DeviceData file said CDL so I changed the .nbf file from o2 to that. i have got slightly further now in that the application tries to install but when it does, it says it cannot the various dll's etc. I think its a prob with the cab file generation, and i cannot find a program that allows me to add/replace the contents of the cab file.
Registry settings are
MSYSTEM - 1.72.181
MSYSTEM1 - O2_UK.
Thanks for your help.
OK, thanks for the info.
Just to update you...
I solved it in the end. I was having trouble with the .cab file because it was compressing itself rather than staying in its usual state. After changing the O2 setting to CDL in the settings files within the cab, and recreating the cab file before sticking it on the phone, it worked fine.
Cheers
Anthony
Please Post modified cab
Could you please post your modified cab?
I am having the same issue trying to install Fonix VoiceDial on the T-Mobile Final 1.72 Rom.
Thanks.
oops, I think i deleted it. I don't have access to it here, but I'll redo it tonight and send it tomorrow.
Cheers
Anthony
I'm having a problem opening the Fonix CAB file. It seems to be different from other cab files. Can you please post the modified one?
Thanks,
Sorry I forgot to redo it, I'll try my best to do so tonight and then I'll post it tomorrow morning.
Cheers
Anthony
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Edit: BTW I added a Dutch language Fax Coverpage as well
edsub said:
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Click to expand...
Click to collapse
Good work edsub. I wanted to look at this, but unfortunately my WinCE Cab Manager trial has expired (current version and previous version) and $149 is a bit steep.
yw, but the Fonix thing is still anoying me . . .Google didnt help either . . .
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
M4io said:
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
Click to expand...
Click to collapse
I couldn't agree more I am actually tempted to buy it though. I installed the newest version and once I used up the 15 executions, I found the previous version somewhere and installed that and that gives you 20 edits - and now I've used those up too Maybe I will email them.
Damn, and I remembered to bring it today as well.
Oh well, all's well that ends well.
Cheers
Anthony
I used the setup dlls from one of the cab's originally deployed on a T-Mobile ROM. I removed the setup dll that has 'O2' in its name.
Apparantly it's one of those new setup dll's that does the version check.
BTW In TrueFax I added a Dutch language coverpage
@Anton: Could you please provide the info on how you managed the Fonix cab to get installed.
I am trying to make is for general use and not just to change some version/operator name in the cab-file (which BTW is of a different type that usually)
Related
Hi, still no one can do it? I want to creat my own splash screen, but the BootSplash_Changer.cab is not working on universal!
sim1 said:
Hi, still no one can do it? I want to creat my own splash screen, but the BootSplash_Changer.cab is not working on universal!
Click to expand...
Click to collapse
WM5 splash screen bulding in the CE ROM , need a code to make change,Bootsplash_Changer.cab for WM2003 not for WM5
Splash Screen Change
means that there is now way to change it ?
Cheers
hrb
There should be a way. The Jasjar ROM does it from within a file in the Extended rom called Default_Imate_PPC_SA_V5.5.03.cab I believe.
i haven't run that cab on my Jasjar, and i still have the imate initial loading screen, i have found the windows loading image tho
Code:
\windows\welcomehead.192.png
its in rom and cant be replaced, nor does it appear in the registry so atm its not changeable
Carnivor said:
i haven't run that cab on my Jasjar, and i still have the imate initial loading screen, i have found the windows loading image tho
Code:
\windows\welcomehead.192.png
its in rom and cant be replaced, nor does it appear in the registry so atm its not changeable
Click to expand...
Click to collapse
That's not the one I'm looking for (this one CAN be replaced btw).
I am looking to replace the splash with the clubimate Website adress that comes up when booting. Must be somewhere a *.nb1/2 File.
Cheers
hrb
how can you replace it? its in rom. cant overwrite, and i couldn't see where it pulls the file from
please if you know share it
Carnivor said:
how can you replace it? its in rom. cant overwrite, and i couldn't see where it pulls the file from
please if you know share it
Click to expand...
Click to collapse
Agree Carnivor,I want to share it,too.
You have to give the replacement the same name, that's all.
But again: it is NOT the Start Splash screen !
Cheers
hrb
hrb said:
You have to give the replacement the same name, that's all.
But again: it is NOT the Start Splash screen !
Cheers
hrb
Click to expand...
Click to collapse
How, i can't overwrite a rom file, using any application
Actually, it CAN be done.. While we were trying to get Chinese/Japanese to display properly on WM5 earlier, as we all know the NLS file as with the splashscreen file are build into the ROM, we all thought earlier that it can't be replaced.
Then a company recently released a Chinese coding enabler program for WM5 and solved the NLS issue, and one of the memeber here Asukal based on that finding released his own version as well. The cab file that Asukal made has a setup file which mentioned something like "usemynls.exe" and instead of replacing the NLS file under window directory, a new self made NLS files is placed under \Temp\wince.nls and I guess WM5 will bypass the build in NLS file when it's running "usemynls.exe"
The "usemynls.exe" seems to be a file included with WM5 as well since in Asukal's cab, it was not included. My guess is it's just matter of finding out how to bypass the splashscreen file to use your own.. Hope I'm making sense here and maybe we can ask Asukal for more info?
CL55 said:
Actually, it CAN be done.. While we were trying to get Chinese/Japanese to display properly on WM5 earlier, as we all know the NLS file as with the splashscreen file are build into the ROM, we all thought earlier that it can't be replaced.
Then a company recently released a Chinese coding enabler program for WM5 and solved the NLS issue, and one of the memeber here Asukal based on that finding released his own version as well. The cab file that Asukal made has a setup file which mentioned something like "usemynls.exe" and instead of replacing the NLS file under window directory, a new self made NLS files is placed under \Temp\wince.nls and I guess WM5 will bypass the build in NLS file when it's running "usemynls.exe"
The "usemynls.exe" seems to be a file included with WM5 as well since in Asukal's cab, it was not included. My guess is it's just matter of finding out how to bypass the splashscreen file to use your own.. Hope I'm making sense here and maybe we can ask Asukal for more info?
Click to expand...
Click to collapse
Nice guess CL55 , I agreed with you , hope someone good for NLS can work for all of us , I think maybe near future we can change splashscreen same as we did in BA,XDAII,mini .
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option...um_query=read,40,30486,30597,page=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/showthread.php?t=286787&highlight=keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
*** /EDIT
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/showthread.php?t=277811&highlight=vibra
Download here: http://forum.xda-developers.com/attachment.php?attachmentid=31657&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/attachment.php?attachmentid=33982&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
another gaijin
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
sesaru said:
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
Click to expand...
Click to collapse
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
ashikase said:
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
Click to expand...
Click to collapse
Does it have the floating bar, like in WM5?
sesaru said:
Does it have the floating bar, like in WM5?
Click to expand...
Click to collapse
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Sugoi!! I'll update now
ashikase said:
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Click to expand...
Click to collapse
Eh! I just install ... There is the floating bar ... (>_<)
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
Really? I don't get a floating bar.
Did you try it on a clean installation of WM6, or did you install it after installing the Bagojs IME? Maybe some settings in the registry are causing the bar to appear.
Also, did you set your locale to Japanese in "Control Panel->System->Regional Settings"?
pharoah said:
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Click to expand...
Click to collapse
Nope, just look for it on the forum. Dont wanna spoil your fun
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
CutKit said:
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
Click to expand...
Click to collapse
You shouldn't need to install both BagojsIME and Asukal's IME package, just Asukal's. BagojsIME provides an older version of the MS IME.
Use you own phone with SB
You can pick a ZERO Yen phone to do a new contract with SB. Then change the sime card to your onw phone. Suppose you have a sim-unlock phone.
Cuivienor said:
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
Click to expand...
Click to collapse
I didnt have to install anything to get the Manner mode working. I think this is implemented in WMXL. But when i set the phone skin security to 1
my phone pad disappears, turns white. Renders unusable. The only fix for me is to set it back to 0.
This might be due to the carrier setting, it happens immediately after running SB external rom carrier info.
Any ideas?
Alcibiade said:
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Have fun !!
Click to expand...
Click to collapse
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
nghihuu said:
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
Click to expand...
Click to collapse
Just to be very clear the ROM is not mine, it's LVSW's and shrinked by the_passenger
I think there are a few other links where the_passenger has uploaded it:
http://depositfiles.com/files/716306
http://fileho.com/download/d96fc8956370/20070320-RUU-Hermes-WWE-3.23.0.0-OS-only-More-space.rar.html
, including a torrent
http://www.demonoid.com/files/details/1075594/?show_files=&page=1&ref=1174503017#file_list
@s2k7: thanks for the tip I'll do that Thanks again
Alcibiade said:
Nope, just look for it on the forum. Dont wanna spoil your fun
Click to expand...
Click to collapse
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
tigerwood said:
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
Click to expand...
Click to collapse
Pof has published an unlocker an I think it should work (Havent tried yet since I dotn really need it...)
I Need some help with the installation of Super Mapple v6 on my WM6 devie.
I have followed this page:
http://aimakidechi.hp.infoseek.co.jp/jasjar/0050_apps/pocket_mapple_v6.html
I have replaced the MsgStore.dll file in the windows dir.
Installed the MultiByteCab.
But I still get the same error when I run PocketMappleD6. It says: Could not be installed, choose a different location.
And I´ve tried bouth device, and sd card.
Thanx!
Uhm, I think you may be in the wrong place. Perhaps you should contact the software developer?
well, they say that it only works with -> wm2003se. But since people get it to work with WM5, I thought that WM6 also would be possible...
Is there a common way of installing wm2003 programs on wm6?
i have my PocketMappleD7 on my device WM6 OS and it is running fine.
I switched to v7, today, And it works! Tnx
Could you please to tell me where i can get Pocket Mapple V7. Im looking for it. thanks in advance
hope someone can help. i can't find too much english help on pocket mapple setup. i have v7 installed on my X01ht with original softbank rom. for some reason though, the map i have installed (osaka) has blocks and squiggles instead of kanji. is there something i'm missing or didn't install correctly? any chance that it could be the English MUI i have installed that's affecting it?
@swordfishjp - you have to purchase or order the software at any Local japanese electronics shop (ie. LAOX, etc ...)
@shunsai - verify your device Regional Settings is set to Japanese (Japan). the menu path is Start-Settings-System-Regional Settings. Do a Restart the device. and run your application again.
otoro_315 said:
@shunsai - verify your device Regional Settings is set to Japanese (Japan). the menu path is Start-Settings-System-Regional Settings. Do a Restart the device. and run your application again.
Click to expand...
Click to collapse
thanks otoro_315! that did the trick... i had my region set to US. :S oh well, i guess giving up the English/American date is a minor trade-off to be able to have a functional street map of Osaka on my keitai. thanks again!
Finally HTC have released the first WM6 upgrade for the excalibur! You need to log into the e-club to download it. The FTP server is overloaded just now though.
I tried to install it on my Dash but it does not work. Invalid model? I installed the Russian WM6 ROM earlier and had do problems. What is the problem here?
Help Please!
Im still at 50% download but if I were you I would try installing it again once the phone has gone into bootloader. Basically just run it twice.
here's a faster link:
http://files-upload.com/files/472108/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
Thanks for your advice but it does not help. The loading starts and then it stops and tells that my phone is not the right device ie. invalid model error 244.
Is this ROM for original HTC phones only? If yes, is there a way around it?
Help please!
Thanks
try flashing the SPL only first
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Link does not download the full file
jsp_m said:
here's a faster link:
http://files-upload.com/files/472108/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
Click to expand...
Click to collapse
I tried the above link and only received a 528K file. Tried to run and said it was corrupted (I expected a 40+ MB file as indicated on the file hosting download page). Tried it twice.
Still waiting for the HTC FTP server to clear up
Gary
just use a download manager...
RE:
Gary,
I took a network trace and see that files-upload.com is resetting the connection. This usually occurs when there's a configuration issue on the server or there's too many downloads occurring. I'm sure it's the massive amount of downloads occurring.
If somebody gets a successful download from either HTC or files-upload.com, could you please upload it to rapidshare.
Thanks,
Robb
Works On The Dash Like A Charm!
jsp_m said:
try flashing the SPL only first
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Click to expand...
Click to collapse
jsp you are correct, just flash the SPL first and next just run the download. This looks like the Russian ROM, WWE version. Where is Excel mobile and word mobile and MS voice command? This is the same mean Joe Green look the Russian ROM has. Yahoo Go 2.0 comes with this ROM. Check out the file folder called Expert,Task Manager is located there. Yeah, its working like a charm on my Dash...........!
For those having trouble dowloading:
WWE:
http://rapidshare.com/files/52468415/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe.html
German:
http://rapidshare.com/files/52468411/HTC_S620_GER_1.27.407.1_4.1.13.44_02.94.90_Ship.exe.html
Enjoy!!
Ps. working regeditor for those who want to app unlock and do other stuff:
http://forum.xda-developers.com/attachment.php?attachmentid=40434&d=1180602266
I think those links are reversed...WWE is under the german heading. Thanks, though!
jsp_m said:
For those having trouble dowloading:
WWE:
http://rapidshare.com/files/52468411/HTC_S620_GER_1.27.407.1_4.1.13.44_02.94.90_Ship.exe.html
German:
http://rapidshare.com/files/52468415/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe.html
Enjoy!!
Ps. working regeditor for those who want to app unlock and do other stuff:
http://forum.xda-developers.com/attachment.php?attachmentid=40434&d=1180602266
Click to expand...
Click to collapse
NICE!!!! Thanks!
anyone noticed the RUS ROM has much better screen saturation? This one looks pale.. it's not a big deal, but just like it the RUS' way..
installs on vista with no problems!
This still requires a CID Unlock correct?
Are you referring to the homescreen and/or color scheme, or all the screens in general?
jsp_m said:
anyone noticed the RUS ROM has much better screen saturation? This one looks pale.. it's not a big deal, but just like it the RUS' way..
Click to expand...
Click to collapse
Ok so the first thing you need to customise is the home screen. I much prefer the recent app lists at the top so it is the first selected. Copy\Application Data\Home\HTC.home.xml off the device, use properties to make it not read only, open in notepad, and move the MRU list plugin entry above the Date/Time/Carrier Plugin. Then copy the file back after either deleting the original or making it not read only. Then choose a different homescreen then go back to the HTC one to see the change.
I've also attached the edited htc homescreen.
no, not the background files, but the screen in general.. it used to happen on Tornado that different RUUs make different saturations in the screen
This WM6 really looks much more pale than the Test RUS one, but I can live with it if I have to.. (is there any app to tune that?).. RUS was much more vivid
i have unlocked my phone. I got the code from tmobile when I try to install the rom it tells me invalid model? Any one else get this?
- Hi. Today I bought and upgraded my S621 (WM5, without any previous upgrade), and faced the same issue refered in this post: http://forum.xda-developers.com/showthread.php?t=296857
Since that post was made in a Beta WM6 version and in late November 2007, I wanted to know if there is a current solution for this matter.
I followed the steps that thread, but with no luck at all, in fact, before I patched, the registry showed the same hex numbers.
Any advises? Thanks people, best regards.
You just have to install the Tegic eT9 US English and you're done!
I used this:
http://movie.99msn.net/kavana/eT9 Full.cab
Thanks nlarge for the link. That was very helpful
What we are all here for!!
how do you insall the cab file on the phone
brent0185 said:
how do you insall the cab file on the phone
Click to expand...
Click to collapse
transfer the cab file to your phone. Preferably, "my documents" folder and execute it. "click on it"
beat me to it, mikey
thanks i got it, computer was doing some weird things, thanks again