Related
Hi
I've recently upgraded to TMOB 1.72 but thanks to DCS's guide, now managed to install the new o2 rom released this week.
However, if i now try to install the new apps such as Fonix Voice ial, it comes up with a message saying incorrect rom version.
Can anyone suggest anything? I've looked but although some people have had the same problem, noone seems to have put forward any solutions.
Cheers
Anthony
Have you done a restore since upgrading?
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
I've looked at the two setup files in the fonix2.0UK0527_O2Limit_20040901.sa.cab from C:\Program Files\Microsoft ActiveSync\HTC Apps and found the same O2 vs CDL in both files, when viewed in a hex editor. However I'm now stuck on finding a way to update or remake the cab file to try again. Does anyone have any suggestions on how to do this or if they had another plan? would it just be easier to downgrade to the official 1.66 o2 and then upgrade again? Also how do I check my version of Bootloader?
Many thanks
Anthony
Anton.Valleyman said:
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
Click to expand...
Click to collapse
What operator ID value did you use for the upgrade? Also, can you tell me what values are in your registry for HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM and HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM1.
My DeviceData file said CDL so I changed the .nbf file from o2 to that. i have got slightly further now in that the application tries to install but when it does, it says it cannot the various dll's etc. I think its a prob with the cab file generation, and i cannot find a program that allows me to add/replace the contents of the cab file.
Registry settings are
MSYSTEM - 1.72.181
MSYSTEM1 - O2_UK.
Thanks for your help.
OK, thanks for the info.
Just to update you...
I solved it in the end. I was having trouble with the .cab file because it was compressing itself rather than staying in its usual state. After changing the O2 setting to CDL in the settings files within the cab, and recreating the cab file before sticking it on the phone, it worked fine.
Cheers
Anthony
Please Post modified cab
Could you please post your modified cab?
I am having the same issue trying to install Fonix VoiceDial on the T-Mobile Final 1.72 Rom.
Thanks.
oops, I think i deleted it. I don't have access to it here, but I'll redo it tonight and send it tomorrow.
Cheers
Anthony
I'm having a problem opening the Fonix CAB file. It seems to be different from other cab files. Can you please post the modified one?
Thanks,
Sorry I forgot to redo it, I'll try my best to do so tonight and then I'll post it tomorrow morning.
Cheers
Anthony
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Edit: BTW I added a Dutch language Fax Coverpage as well
edsub said:
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Click to expand...
Click to collapse
Good work edsub. I wanted to look at this, but unfortunately my WinCE Cab Manager trial has expired (current version and previous version) and $149 is a bit steep.
yw, but the Fonix thing is still anoying me . . .Google didnt help either . . .
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
M4io said:
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
Click to expand...
Click to collapse
I couldn't agree more I am actually tempted to buy it though. I installed the newest version and once I used up the 15 executions, I found the previous version somewhere and installed that and that gives you 20 edits - and now I've used those up too Maybe I will email them.
Damn, and I remembered to bring it today as well.
Oh well, all's well that ends well.
Cheers
Anthony
I used the setup dlls from one of the cab's originally deployed on a T-Mobile ROM. I removed the setup dll that has 'O2' in its name.
Apparantly it's one of those new setup dll's that does the version check.
BTW In TrueFax I added a Dutch language coverpage
@Anton: Could you please provide the info on how you managed the Fonix cab to get installed.
I am trying to make is for general use and not just to change some version/operator name in the cab-file (which BTW is of a different type that usually)
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option...um_query=read,40,30486,30597,page=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/showthread.php?t=286787&highlight=keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
*** /EDIT
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/showthread.php?t=277811&highlight=vibra
Download here: http://forum.xda-developers.com/attachment.php?attachmentid=31657&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/attachment.php?attachmentid=33982&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
another gaijin
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
sesaru said:
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
Click to expand...
Click to collapse
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
ashikase said:
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
Click to expand...
Click to collapse
Does it have the floating bar, like in WM5?
sesaru said:
Does it have the floating bar, like in WM5?
Click to expand...
Click to collapse
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Sugoi!! I'll update now
ashikase said:
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Click to expand...
Click to collapse
Eh! I just install ... There is the floating bar ... (>_<)
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
Really? I don't get a floating bar.
Did you try it on a clean installation of WM6, or did you install it after installing the Bagojs IME? Maybe some settings in the registry are causing the bar to appear.
Also, did you set your locale to Japanese in "Control Panel->System->Regional Settings"?
pharoah said:
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Click to expand...
Click to collapse
Nope, just look for it on the forum. Dont wanna spoil your fun
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
CutKit said:
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
Click to expand...
Click to collapse
You shouldn't need to install both BagojsIME and Asukal's IME package, just Asukal's. BagojsIME provides an older version of the MS IME.
Use you own phone with SB
You can pick a ZERO Yen phone to do a new contract with SB. Then change the sime card to your onw phone. Suppose you have a sim-unlock phone.
Cuivienor said:
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
Click to expand...
Click to collapse
I didnt have to install anything to get the Manner mode working. I think this is implemented in WMXL. But when i set the phone skin security to 1
my phone pad disappears, turns white. Renders unusable. The only fix for me is to set it back to 0.
This might be due to the carrier setting, it happens immediately after running SB external rom carrier info.
Any ideas?
Alcibiade said:
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Have fun !!
Click to expand...
Click to collapse
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
nghihuu said:
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
Click to expand...
Click to collapse
Just to be very clear the ROM is not mine, it's LVSW's and shrinked by the_passenger
I think there are a few other links where the_passenger has uploaded it:
http://depositfiles.com/files/716306
http://fileho.com/download/d96fc8956370/20070320-RUU-Hermes-WWE-3.23.0.0-OS-only-More-space.rar.html
, including a torrent
http://www.demonoid.com/files/details/1075594/?show_files=&page=1&ref=1174503017#file_list
@s2k7: thanks for the tip I'll do that Thanks again
Alcibiade said:
Nope, just look for it on the forum. Dont wanna spoil your fun
Click to expand...
Click to collapse
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
tigerwood said:
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
Click to expand...
Click to collapse
Pof has published an unlocker an I think it should work (Havent tried yet since I dotn really need it...)
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Tried but did not work
Hello there,
I installed the Cab (install to: device) on my unlocked X02HT with dopod rom.
Turned the device off and on again but no change.
I am using FuseSP and PocketDOS and still both have this annoying numeric keyboard problem
Or does this hack only fix the Yahoo Go and WLS issues?
On my HTC S630 it fixed the problem I had with Yahoo Go, I really don't know if this fixes other apps (this should fix the input problems in the textboxes in .Net bassed apps, but I haven't tried any other) and if this works with other ROMs apart from HTC's one, I guess is just a matter of testing it.
The instructions that I have from that forum are:
- copy the .cab to your phone
- run the .cab with File Explorer to install it
- restart your phone (or shut it off, then turn it back on)
- it should work after that
It worked!
Hi,
I am using softbank X02HT with Dopod C730 ROM. This fixed the input bug with Yahoo! Go.
Thank you so much for this fix! I'm always grateful to smart ppl that come up with things like this!
Yus
does not work somehow on my x02ht dopod rom
as mentioned before i tried it with my x02ht with dopod rom. i did not try it with yahoo go but with other apps i had this numeric key problem with and there was no change...
funny thing is i can install the .cab file as often as I want to. It looks like it installs fine. And then just for fun if I click the cab again after reboot it installs it again. It does not tell me it is already installed even after installing it for the x-time. Is this normal? I tried to installl to device and storage card. no change.
Cheers
xsl777 said:
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Click to expand...
Click to collapse
It runs on my dopod c730.
How about Gmail mobile? I can input my username there...
anybody can help?
Worked like a glove! Solved problem of the apps that treats letters as shortcurts and dont write!
Thanks a lot
need yahoo go for c730
i need yahoo go for cavalier, is there any link to download this ?
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
gimbong said:
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=432946 and read how to app unlock your device.
Also these would be very helpful http://forum.xda-developers.com/forumdisplay.php?f=415&nojs=1#goto_forumsearch, http://forum.xda-developers.com/showthread.php?t=298893
Cheers
hi all,
been trying to run iGo8 (navigation) on my blackstone.
after the install (no error message) the program tries to start, i get the initial start page (splash screen), then it shuts down for no reson.
anyone know how to fix this?
i tried the iGo7 i have running on my ipaq (windows mobile 5) and it does the same thing...
currently running:
rom: Dutty's V2.1 extreme
radio: 1.10...
i also tried to install skype and it stated that some files are missing from the installation no matter what i tried (update: managed to install skype - simply installed the PDA version - not the smart phone one... sorry for the bother)
anyone having said problems? any idea how to fix it?
any help would be greatly appreciated...
I had the same problem. But i believe you have 2 folders, one called 2577 (or something like that) and an IGO8 folder, right?
Go into the IGO8 folder and change the name of application.dat to IGO8.exe
This can best be done by connecting your phone with you cable to your pc.
Anyway, when you changed the name of the file, then try to open that newly renamed file. Do not open it through Start > Programs > IGO8.
still need help
Tnx for the help Sevenrow, unfortunately - it didn't work...
I tried everything i can think of (after trying your suggestion), including copying the igo8.exe (after the name change) to the install folder (program files), but still - the same crash.
the only thing i can think of now is that the program isn't planned for microSD cards, i opened the sys file and saw it was addresing the program as "%SDcard%/IGO8/"
could that be it? i tried to change the file to "/Storage Card/IGO8" likr it really is - but still no good.
any ideas will be greatly appreciated (even if they have to do with the IGO 7 that i know works perfectly (just not on the blackstone)
It's a guess but do you have the newest version of .net (3.5) ??
I have no idea about igo8 but skype runs fine on my HD and the install was without problems.
I have tomtom and route66 and both work fine on the HD.
Igo8 runs perfectly on my HD, so i guess there's something wrong with your files. I can help you with it, but i don't think it's allowed here on the forums. So tell me, if you hang out in an IRC channel or something, i'll drop by and help you out.
Try to disable A-gps.
Thanks for everyone's help - still a no go...
running .net3.5 but thanks for the thought Dave.
been trying to switch back to my perfectly legal (and working) igo 7 - but nothing... i just don't get it.
will try the a-gps off next (for now i let my HTC rest a bit - it's been a long day for it).
Sevenrow - i don't really hang anywhere... tell me where you stay - and I'll visit happily.
___________________________________________________
It's not paranoia if the Blackstone is really out to get you!
Maglen said:
Thanks for everyone's help - still a no go...
running .net3.5 but thanks for the thought Dave.
been trying to switch back to my perfectly legal (and working) igo 7 - but nothing... i just don't get it.
will try the a-gps off next (for now i let my HTC rest a bit - it's been a long day for it).
Sevenrow - i don't really hang anywhere... tell me where you stay - and I'll visit happily.
___________________________________________________
It's not paranoia if the Blackstone is really out to get you!
Click to expand...
Click to collapse
You can find me @ the quakenet server. I'll join a new channel tomorrow named it #xda-dev. See you tomorrow.
Hello,
KIndly enjoy the images while I upload the ROM
Here is the link
http://rapidshare.com/files/226454458/GM2_WWE.rar
Procedure
unrar the archive
copy the .abi file to a 1GB SD card
press dpad down+reset
wait till it finish
Pls do not forget to write feedback here
Oh, wonderful.
I hope there would be some improvemnents on user interface.
My dreams come through ! THANK YOU ! I'm going to test it right now.
The Network Setting isn't working at all. The field to choose operator and country is blank.
Seleron said:
The Network Setting isn't working at all. The field to choose operator and country is blank.
Click to expand...
Click to collapse
try these cabs
Clicking on today screen on right soft button (Comm Mgr.) opens the page with settings for clock and alarms.
Seleron,
Are you not able to attatch the phone to any netowrk? And how do you rollback after testing this out?
I have a 552W and I am willing to test. But I would like to know the rollback procedure since I cant afford to be in a bricked-state even for a day
Don't worry. These network settings is a program from Asus. It's not necessary to use it. It's only to configure settings in your phone to be able to connect to internet. You can use the same tool from Microsoft (settings, connections, connections and "automatically configure connection").
These ROM is stable right now and have only few really minor bugs. The rollback procedure is easy - just download from Asus your old ROM and after connecting your phone to the computer run this program which you downloaded.
hdubli,
these cab solved the problem - install.OBM.NetworkSetting.CAB
Thanks
rsunny said:
Seleron,
Are you not able to attatch the phone to any netowrk? And how do you rollback after testing this out?
I have a 552W and I am willing to test. But I would like to know the rollback procedure since I cant afford to be in a bricked-state even for a day
Click to expand...
Click to collapse
can be rolled back
Hdubli
Thou shall be knighted. It works and it works beautifully!
rsunny said:
Hdubli
Thou shall be knighted. It works and it works beautifully!
Click to expand...
Click to collapse
Thanks..Will try to get a ew version with more storage space
hdubli,
maybe you could remove programs like: EziPhoto, Asus Today etc. ?
Seleron said:
hdubli,
maybe you could remove programs like: EziPhoto, Asus Today etc. ?
Click to expand...
Click to collapse
Yes testing on my p552w..if all well then will release
Works like a charm on Asus P552 (without w). As before - GPS is not working (difference between w and without w versions) but whole system is working perfectly fine and fast. Tested Matrix trailer on Core Player and got 492,18% as a result!
How can I install windows mobile 6.1 with polish language?
I downloaded from asus page rom but when I'm trying to instal it from PC I have message that language on mobile phone is different from this one I want to install. Maybe someone have wm 6.1 PL im .abi file?
lizaq said:
How can I install windows mobile 6.1 with polish language?
I downloaded from asus page rom but when I'm trying to instal it from PC I have message that language on mobile phone is different from this one I want to install. Maybe someone have wm 6.1 PL im .abi file?
Click to expand...
Click to collapse
Start to install again.
Let the program check your system.
When the error appears look in the folder where the firmware is.
You will find a file named tmp_rom.abi.
Copy the file in other place and rename it with the name of firmware and let the extension .abi.
Cancel the current installation.
Copy the new GM2_.....abi file on the SD card. Put the SDcard in the phone, start the phone with button down+soft reset ...the boot loader will start and install your firmware automatically.
The version/language verifying procedure is done only if you start with EXE type firmware file. With abi file the only checking is for correct name, it should start with GM2...
I already try it with no luck. While boot my asus didn't see abi file. I used name:
GM2_V5.12.0S.PLK00.00_M4.6.5.P5_V2.9.0 POL00_20081230_3050.00.abi and file was extracted from GM2_V5.12.0S.PLK00.00_M4.6.5.P5_V2.9.0 POL00_20081230_3050.00.exe I tryed also other names but it didn't work.
I have:
Device OS Ver: 0.0
Device ExtROM ID: none
Finding file: GM2 *.ABI
File not found!
hdubli said:
Yes testing on my p552w..if all well then will release
Click to expand...
Click to collapse
Mate,
As someone has suggested, could we do without those useless things like Ez**(zip/music/photo) and other things you can think of.
Another suggestion :
The right soft-key links to Comm. Manager, but opens up the Alarms menu. Please do take care of that.
rsunny said:
Mate,
As someone has suggested, could we do without those useless things like Ez**(zip/music/photo) and other things you can think of.
Another suggestion :
The right soft-key links to Comm. Manager, but opens up the Alarms menu. Please do take care of that.
Click to expand...
Click to collapse
Bug Report :
1) Camera Launch has a big delay(Yes my CPU is in Turbo mode)
2) Camera display is washed out/grainy (Not that I use the cam, just letting you know that your build is going to be perfect)
rsunny said:
Bug Report :
1) Camera Launch has a big delay(Yes my CPU is in Turbo mode)
2) Camera display is washed out/grainy (Not that I use the cam, just letting you know that your build is going to be perfect)
Click to expand...
Click to collapse
Yes.am working on it