How to prevent SIM cards from copying OEM files on each boot ? - Upgrading, Modifying and Unlocking

Hi there, please I request your help on the following:
Since I bought my orange spv m600, I've always had that stupid 'Orange +' icon in start menu programs folder, I can't even mark it as hidden, it will be restored at next boot (at least I guess that happens while restarting).
edit: it should be the SIM card that writes it on every boot. I wonder how to overide/disable that... maybe a reg editing ?
Any idea how I could get rid of it ?
Thanks, niko

No Orange icon here
I have the SPV M600 G4 Model also from orange (Netherlands) And not the icon you are talking about. I flashed and unlocked the phone the day I got it. Think the icon might still be there on your SPV cous its not Unlocked ?
Greetz Ché ter Maat.

It's SIM-unlocked, is yours CID-unlocked ?
I guess there is an extra OEM memory zone which isn't flashed with cooked ROMs. It looks like that. With ANY rom.

i don't know how to delete it, but i know that it's a menu written by the sim card...
i bet that if you try with a different sim card you will not have the icon...

ga!nusha said:
i don't know how to delete it, but i know that it's a menu written by the sim card...
i bet that if you try with a different sim card you will not have the icon...
Click to expand...
Click to collapse
Damn... Thanks for your answer, of course you're right... Didn't try but I'm sure that's it.
Would someone has a workaround ?
I'll try to do my next hard reset with the SIM card off, then create a read-only hidden file with same filename, see if it helps... Stupid providers !

Title edited to reflect the subject better
When the SIM is off, the icon is not there anymore.
Then I tried to create a fake file with same filename and read-only attribute, it was replaced on next boot with SIM

i'm not shure if you still need the answer...
the program that adds the orange menu is SIMTKITAPP.exe

Well, it still interests me, thanks
How do I prevent it to run ? As it is not in my startup folder...

lastnikita said:
Well, it still interests me, thanks
How do I prevent it to run ? As it is not in my startup folder...
Click to expand...
Click to collapse
i dont think you can do anything only getting a sim from another company that does not offer does services. the icon comes out only when the sim has apps or services on it. if you try the sim on another device they will also come up.

i think that you have to delete some registry keys... i will investigate...

Related

Reset to cradle and more

I'm in serious need of help - i tried to upgrade my sx56 to the 4.00.05 with voice command and now i can't get the back light on, i've got no phone and i can't even get the usb connection to notice the unit.
HELP - what do i do to fix this problem
thanks :shock:
Can you get to the bootloader? If it was only the operating system that you flashed you should be able to recover it. You will need an sd/mmc card, a card reader/writer and xdatools. All the info is here on the forum. You can download a rom from www.yorch.net and choose at the bottom of screen "sd card flashing".
forgive my ignorance but where would i find the bootloader and i unfortunately don't have a sd card as yet - i've been looking into that guess i'll be gettng one pretty soon
may i assume that this will resolve the issue that my usb connection is not even recognizing that my unit exists
thanks
robin
hey cruisin-thru, i have just purchased a 256 card - will i be able to resolve this problem or am i totally screwed
thanks
:shock:
Hi ...
since ur gonna flash ur XDA with SD i may advice you to get a newer ROM than 4.00.05. i recommend either TMO 4.01.00 or A30.09. both you can get cooked at Stefan kitchen at lumpistefan.dyndns.net
once you cook the ROM as .nbf file and download it, u will need SD reader/writer for ur PC. move the file to the SD card and insert it into ur XDA. if it asks u to format it just press NO.
goto the bootloader by pressing and holding the power button while soft reset. it should recognize the card content and ask u to press the action key .... enjoy ur new ROM!
note: if u still want the 4.00.05 ROM, use winzip or winrar to open the exe file and extract the .nbf file and follow the above steps.
good luck ...
thank you for your assistance - i've just purchased the card reader/writer and am about to transfer the .nbf file over
you indidated going to the 4.01.00, can you tell me what difference there is between the different roms
thanks again for all your help
robin
Hi ...
Mainly the diferences are bugs that are fixed in old versions like some issue with the back light, SD card erasing, self rebooting ... etc.
A30.09 is perfect except it has an annoying sound issue and has no extras at all ... that's why I prefer TMO 4.01.00
BTW, I noticed that I just misspelled the kitchen address ... it's http://lumpistefan.dyndns.org/

XDA IIi - Please help me !!

Hello Guys
Firstly, Ive been thru this forum and wiki and have tried various things without major success............Im now getting pretty fed-up.
Ive got an O2 XDA IIi, which Ive unlocked ready for my Orange Contract SIM.
My SIM works for phone and text, but keeps getting "no modem" errors if I try to connect GPRS.
Ive downloaded Resco and can see the Extended Rom folder.
Ive downloaded 3 or 4 different Ext Rom Unlockers - without success (Ive deleted each in turn, installed the next version and soft-reset as I went).
I actually have all of the Orange CAB files, which seem to load onto the PDA if i put them in My Docs and click each in turn - BUT, I still cant connect and all reverts back to O2 if I hard-reset.
So, now I have done a hard-reset and soft reset prior to O2 stuff being auto-installed from Ext Rom (?).
Im getting pretty frustrated at not being able to access the write-protected Ext Rom in order to swap the O2 stuff for my Orange settings.
PLEASE - can anyone give me some step-by-step instructions on what I can do ?
AND - let me know if Im looking in the totally wrong place to start with.
Thanks
Paul
My XDA IIi details are :-
Model No PH10C
Windows Mobile 2003 2nd Edtn
Processor Intel PXA272
Speed 520MHz
Flash Size 64MB
Memory 122.04MB
ROM Version 1.10.00 WWE
ROM Date 12/24/04
Radio Version 1.00.00
Protocol Version 1337.39
ExtROM Version - Not Showing as soft-reset during software load
http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen
the last part
unhide your rom and unlock you rom
copy the cab files to the extented rom dir
edit the txt file to include the new added cab files
and remove the entry for the ones you are removing
hide and lock your rom
and hardreset
Thanks Rudegar
Unfortunately, Ive already tried the unlocker tool (and several different versions of them).
Ive just tried again with the one mentioned (it tells me that the software was written for an older version of windows software), and when i select Unhide, the image turns grey but nothing happens.
When I select unlock, i get an error message and "FL_IOCTL_BDTL_HW_PROTECTION"
When I click OK, i get "- A device attached to the system is not functioning."
Clicking OK again, gives me "extrom unlocked" - but it ISNT unlocked.
Any ideas ?
Thanks
Paul
Also,
As I can see the Ext Rom folder, I tried to edit the config.txt file (just to see if it could be edited).
I got a message "No Storage memory available. Tap Cancel, use File Explorer to delete some files and try again. Or, move the note to an alternative storage location. Tap discard to close the document without sving changes"
If I then try to move or delete the config.txt (or any other) file, I get "The media is write protected"
I then installed the Repart_DOC_with_Default tool to make the Ext Rom file larger.
Unfortunately, I get an error "FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" message and I cannot increase the folder size.
Anyone have any ideas please ?
Thanks
Paul
no if i were you i would try asking or looking in the apline forum because the IIi is alpine and there may be more people there who knows any special things you need to do to unlock alpine devices
Thanks Rudegar
Ive placed a link to this thread in the Alpine section, but as there are so few posts there Im not too hopeful.
Does anyone have any ideas on this please ?
I dont mind paying (or donating) a fair amount in order to get this sorted.
Cheers
Paul
For the mobile that can not unlock by the Extended ROM Unlocker, You have to use the method that DrChair posted here.
You have to find the start point of the ExtROM image which is in Fat16 format, by using Hex Editor and Find "eb fe 90 4d 53 57 49 4e 34 2e 31" (Hex). Copy from this location till 23.2 MB of file size. Open it as virtual disk, then you can do modification.
OMG - I thought things were complicated already.
Surely there must be an easier way to edit Extended Rom on XDA IIi ?
All of the other models appear to have fairly straightforward methods to edit - all except for the XDA IIi
Im afraid all of the link you gave has gone way above my head - it is far too complicated for me.
............
1. First dump your rom to a SD-card, using the well know method.
Which method ? - its not well known to me as i havent found it yet ?
2. Next get the rom to your pc, using ntrw
ntrw ?
3. Using a Hex-editor, copy 2BC019C (HEX) till 3EC019C (HEX) to a file.
ok, i think i will be able to do this.
4. Mount that file as a virtual Harddisk (I use the virtualdisk-plugin for total commander)
??
5. Modify your ExtROM on that Virtualdisk.
ok, i think i know what this means.
6. Umount the Virtualdisk.
??
7. paste the contents of the (modified) file back into the rom-file, at precicly the same position and save it under a different name.
can i do this if the files are write protected ?
8. put the modified rom back onto your SD-card, using ntrw.
? as per 2.
9. Flash your Magician, with the new rom.
Flash ? - and I dont have a Magician, I have an Alpine.
Anyone able to clarify all of this please ??
Paul
Since you are not that technical, I suggest you to forget about it. Or else you may destroy your IIi.
Be understand that architecture of IIi II and Mini are all different. Extended ROM of II is located at DOC (disk on Chip) ROM. But Mini and IIi are not. Mini Extended ROM is located at normal flash memory and not locked READ HERE. I think IIi is the same as Mini. So, wait for some good programmer or hacker to do it. Which may be forever.
You can get some flavour by reading Here. Eventhough you could not read the language, but all the pictures will tell you something.
but it should not be requred to add the stuff to the extented rom to get it to access gprs and mms it's just about putting in the settings
and making sure the right settings are used if there are still
the old settings there
Thanks Guys
I have copied several .cab files onto the PDA for Orange UK Contract settings.
My concerns are that I know the Extended Rom is full of references to O2 and will revert to O2 should I need to hard reset (unless I always keep Orange settings on my MMC).
BUT, Im not convinced that simply clicking onto the Orange .cab files has given me the correct set-up to access GPRS etc - as I cannot access at all.
I keep thinking that somewhere in the darkest depths of the system those original O2 settings are still controlling my PDA.
If someone can confirm for me that by installing and running all of the orange .cab files will indeed set-up the PDA for full Orange access (with no O2 settings running from within the Ext Rom), then I can cope with having to store a copy on my MMC.
Thank very much guys
Paul
if you search the networking forum with the text
GRPS AND <insert your cellphone company>
you are sure to find the right settings plus how to manualy set it up
and when you then sync with activesync you can set it to backup
your settings so if you hardreset you can just restore your backup
and get your settings the way they were
Orange GPRS Settings on 02 xda i
The settings are:-
In New Connections:
SELECT A MODEM = Cellular Line (GPRS)
ACCESS POINT NAME = orangeinternet
USER NAME = Blank
PASSWORD = Blank
DOMAIN = Blank
IN ADVANCED SETTINGS TCP/IP TAB
TICK User server assigned IP address
TICK Use Server Assigned Addresses - SERVERS TAB
You then tap on the G Symbol at the top of the screen and then tap on
Connect GPRS
Two seconds later you are connected.
Thanks Silverhill,
Unfortunately, those setings are already in the PDA and dont connect.
I get a "modem not found" error message.
I can connect with WAP dial-up, but not GPRS.
.....
I have now ordered both O2 AND Orange pre-pay SIM Cards (as they cost less than £10 for the two).
If I do a hard-reset and the O2 SIM doesnt work, I will know the PDA is faulty.
If it works, I can then load the Orange .cab files (after doing a soft-reset during the hard-reset so as not to pre-load O2 from the Ext Rom).
I will then try the Orange Pre-Pay SIM to see if that works.
If it doesnt, it would suggest that the O2 files on the Ext Rom are indeed controlling the settings - even though I stopped them from loading on the reset.
Other than that, I am totally stuffed.
It may be that I have to do a number port of my valuable mobile number and go onto the O2 network.
Cheers
Paul
OK
I received my new Orange PAYG Sim Card, registered it and it worked first time. (I did the same with the new O2 Sim and that worked too.)
Instant GPRS connection - wonderful.
SO, we know that the settings I have on my XDA IIi are correct for Orange and that there isn't any hardware conflict and also that my PDA is not faulty.
A quick phone call to Orange Tech Support AND THEY ASK YOU TO ENTER ALL OF THE SETTINGS AND TELL YOU THE PDA MAY NOT BE COMPATABLE WITH ORANGE !!!!
They really are useless !
I explain (argue) that the PDA must be compatable as the new Orange Sim works fine.
Im told that the only way to check is to go to an Orange Shop and ask them to test my Sim Card in one of their GPRS phones - "which will prove the Sim Card is perfectly OK and the problem is with the PDA" (their words).
I travel 25 miles to a shop and the Sim Card DOES NOT work in their phone.
The assistant offers to call Orange Tech for me to confirm the situation. After being kept on hold for 35 minutes, Orange inform her that my Sim is an older (brown in colour) card and it isnt possible to programme it for newer technologies.
The assistant asks for a new replacement for me and is told that because my PDA is not an Orange supported phone, there is no way for them to run a diagnostic check on it and therefore no way to be 100% sure the Sim is the problem - despite the Orange Sales Assistant confirming it does not work on their GPRS phone.
I am then informed that I can BUY a new Sim Card (blue in colour) for £20 that will work.
At this point I have spent a week trying various settings at home and have stood in the Orange shop for over an hour, so I agree to buy the new card.
Hopefully, it will arrive today or tomorrow and all will be well.
My only "worry" is that I still have all of the O2 settings on my extended rom - so I will keep looking on the forums over the next few months to see if anyone has any better solutions to those currently available.
Thanks everyone for you feedback and assistance.
Paul
buy?
odd when i had my old xda1 stolen i just called my cellphone company
and said it was stolen and they sendt me a new sim card
no charge
same thing had i lost it
Hi Rudegar
Yes - BUY
Ive been an Orange Contract customer for around 9 years (OK, so my monthly bill is only around £3).
They are happy to change my account to Orange World (GPRS enabled) and charge me an extra £4 a month min.
They are told by their own staff that my Sim is actually faulty - the Sim they originally supplied.
They are shown that the XDA IIi is not at fault.
And then they insist on charging me to be able to access the things they are charging me to access.
Like I said, Orange really are a joke.
I have actually placed my mobile phone number (it is pretty special) for sale on ebay http://cgi.ebay.co.uk/Rarely-Availa...429158530QQcategoryZ29781QQrdZ1QQcmdZViewItem
When it sells, I will be moving network and will just go to pre-pay with any bog std number as my call charges and usage are so small.
Thanks
Paul
PS, I hope I wont get told off for plugging my ebay sale.
cant you transfer your nr to your new sim with another company ?
here you can but they take a month to do it guess as a punishment because the thing only takes them 1 sec
SCREAM !!!!!!!
OK, thats out of my system now.
Ive just had the new Orange Sim Card for my contract with them.
Ive tried to register it with them and they REFUSE to pair the new Sim with my XDAIIi
They inform me that because it is a non-Orange phone the insurance would be invalidated - I explained that I do NOT have any insurance to worry about invalidating.
I asked why they were happy to pair a new PAYG Sim Card with the phone a couple of days ago but not my Contract Sim Card.
Their reply was that "by pairing the PAYG Sim and the non-Orange handset, we get new business, but by pairing your contract with a non-Orange phone, we are losing money because you've performed a back-door upgrade".
CAN YOU BELIEVE THESE PEOPLE.
I havent a clue what to do next, as Im getting pretty fed-up of dealing with them.
Paul
lol brand now world where the customer is never right and a bit of a bother
and should count himself lucky that they want to talk to him at all
is at hand
take would take my business elsewhere and never look back
here orange just became more and more unpopular untill they sold their
department to telia and left the country

Have to remove SD card to boot under WM6

Ever since upgrading to WM6, I have lost the ability to turn cold boot my phone without first removing the SD card. If I have the SD card inserted, I get rebooting loops. Can I fix this?
yep this has been solved
It has????
What's the solution????
I'm pretty sure it's been fixed for the official HTC release of WM6, but not positive. The other way to fix it would be to use SKTools Lite to clear the duplicates out of the notification queue and then remove the Microsoft Live service from the registry. You'll lose the Microsoft Live messenger, but you'll gain your phone back
yep merwin has written the solution in detail in 2 other threads, just search for boot loop in the excalibur forum.
Sure enough, just delete this:
HKLM\Services\Windows Live
And now I am booting fine!
I still get the little Text message about the wrong number, but I can live with that.
rocky2 said:
Sure enough, just delete this:
HKLM\Services\Windows Live
And now I am booting fine!
I still get the little Text message about the wrong number, but I can live with that.
Click to expand...
Click to collapse
Try removing the My5 shortcut from the c:\windows\startup folder
merwin said:
Try removing the My5 shortcut from the c:\windows\startup folder
Click to expand...
Click to collapse
Total Commander won't let me. How'd you do that?
rocky2 said:
Total Commander won't let me. How'd you do that?
Click to expand...
Click to collapse
Oh, the key is to Move it rather than delete.
And this fixed the problem. Thanks!
Now I have a perfectly functioning Dash.
But am still pining a bit for the Blackberry Curve...
rocky2 said:
Total Commander won't let me. How'd you do that?
Click to expand...
Click to collapse
Rename file. Soft reset. Delete file.

Wirelles internet at my college with Certificates

Hello,
i can't connect my artemis to my school network.
they use a Certificate, i have wm6.
does anyone know how to do it ???
i used a program Securew2 but that wouldn't work with me, maybe wrong settings??
Is your phone a original HTC or T-Mobile etc, and from what country?
i dont think it has something to do with that ??
mine is original, from the Netherlands
ok, just checking you actually had WiFi does it come up asking you to accept the certificates, or are they certificates you need to pre-install?
i have an certificate on my sd card, when i clik it, it doesn even ask to add it, its inmediatly installed.
rohithathie said:
i have an certificate on my sd card, when i clik it, it doesn even ask to add it, its inmediatly installed.
Click to expand...
Click to collapse
hmmm... have u tried copying the certificate on to the device's memory and then clicking it?
still the same
rohithathie said:
still the same
Click to expand...
Click to collapse
i have no idea then lol. Good luck with that one

No image file

Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
rollride said:
Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
Click to expand...
Click to collapse
Format de SD card, and leave only the KAISIMG.NBH in it. FAT32
ok i will test and share the result thanks for the fast suggestion !
have a nice day
rollride said:
ok i will test and share the result thanks for the fast suggestion !
have a nice day
Click to expand...
Click to collapse
Damn... i said that ?? Can't remember....
Anyhow, post back results
same thing
after format same result no image file ...
So... your SD card is formated as FAT32, the file is named, exactly, KAISIMG.NBH, and the device does not detect it...
Question number one, is the sdcard ok ?
Question number two, is the sdreader ok ?
hell yeah
Everything is exactly how it should be. Except i was thinking also that sd card may be the problem but after a few tries with different cards i found out that the card is not the problem. After all i think that may be this is fault of the guys i took my phone to repair usb port but after three weeks later they didn`t, telling me that for my phone there is no port `cause it wasn`t as normal kaisers` port it is mirrored and the can`t find such in the internet to order (my kaiser is from T-mobile from Germany) and after they gave it back to me it started to make this weird thing...
Anyway thank you for your fast answers and suggestion really appreciate your help dude i wish you the best!
"Mirrored" USB port?
Sounds like a regular Kaiser multi-port to me. Kaiser, Tytn, Raphael, and a whole bunch of other HTC phones use that port.
Double-check and triple-check that ATools recognizes the file as a true Kaiser image.
You can name it whatever you want but if the file signature doesn't match what the SPL is looking for, you won't get it to install.
Which SPL are you using and did the "repair" people reflash the stock SPL ont the phone?
And... how long before the gray screen says "No Image File!"? If the image is wrong you will most likely see a group of 8 numbers across the top of the screen.
If you see these numbers, the image file is wrong.
?!?
the spl is 3.56.Hard CPLD-8
THERE is no numbers just displaying really fast no image file it took a long time to even read it `cause it is displaying it very fast and after that is back to three color screen ! I really don`t have any ideas any more ...
Success i formated in fat after that fat32 and this trick worked !
I was just about to ask about formatting...
Good to hear you figured it out!
When this "strange" issue pop up with sdcards and usb flash drives, i always resort to the the old HP SD Format tool
http://en.kioskea.net/download/download-127-hp-usb-disk-storage-format-tool
i will have it in mind next time ! thanks you !

Categories

Resources