Related
I have install WM5 on my XDA2s with the Villina version the prob. is tha when i try to use my contact button it keeps closong down, i cant seem to access the contacts at all how can i solve this problem????
PS i ther a better ROM that this one that i can use if sent me the link.
-----------------------------
ROM vr. 5.04.09 WWE
ROM date:11/02/06
Radio ver.: 1.15.00
Protocol ver. 1337
Try Wiki Page
the gitt said:
I have install WM5 on my XDA2s with the Villina version the prob. is tha when i try to use my contact button it keeps closong down, i cant seem to access the contacts at all how can i solve this problem????
PS i ther a better ROM that this one that i can use if sent me the link.
Click to expand...
Click to collapse
Please go to this page for information.
http://wiki.xda-developers.com/
u can find many ROM and fixing troubleshot there's step by step how to upgrade or downgrade u'r ROM...
try Helmi AKU 3.5 ROM it's quit stable.
good luck
the gitt said:
I have install WM5 on my XDA2s with the Villina version the prob. is tha when i try to use my contact button it keeps closong down, i cant seem to access the contacts at all how can i solve this problem????
PS i ther a better ROM that this one that i can use if sent me the link.
-----------------------------
ROM vr. 5.04.09 WWE
ROM date:11/02/06
Radio ver.: 1.15.00
Protocol ver. 1337
Click to expand...
Click to collapse
Hi gitt,
I don't think it is a problem with the ROM but related to the AKU version.
If you copied your pim.vol from your previous WM5 Rom to this one and the AKU version was different (coming from 2.xx to 3.xx), then I'm pretty sure this is the problem.
So you have two options to solve your problem, but both are not straight forward, sorry:
1) Try first to do a backup using PPCBckpContacts in this ROM, if it doesn't work then you have to revert back to your previous ROM and do a backup of your pim.vol using PPCBckpContacts ( http://forum.xda-developers.com/showpost.php?p=1033173 )
2) use the emulator to achieve the same ( http://www.microsoft.com/downloads/...A5-183A-4A1E-A7E2-CC500ED1F19A&displaylang=en )
a) launch the emulator, select a directory on your pc that will play the storage card, then replace the pim.vol by yours, do a soft rest via the emulator menu and use PPcBckpContacts to do a backup
3) use PPCBckpContacts to do the restore in your new ROM.
Cheers,
.Fred
I have the same problem after upgrade from version BA 5.1.1700 to Helmi aku 3.5 v 1.4. Is this solution for my problem too?
ljex said:
I have the same problem after upgrade from version BA 5.1.1700 to Helmi aku 3.5 v 1.4. Is this solution for my problem too?
Click to expand...
Click to collapse
Probably! What is the aku version of BA 5.1.1700?
Cheers,
.Fred
Version name is BA WM5 English Rom 5.1.1700_bulid_14343_ upgrade.
I have a question. Can i format all storage and after upgrade the windows? because now when i try reinstall windows the previous version setting and programs stay there and maybe the old contacts stay there too and this is the reason why now concacts dont working.
But i dont know how i can format or delete all data in my storage. I have qtek 9060 and the soft reset is the same as hard reset (some programs not working after reset but nothing esle)
ljex said:
Version name is BA WM5 English Rom 5.1.1700_bulid_14343_ upgrade.
I have a question. Can i format all storage and after upgrade the windows? because now when i try reinstall windows the previous version setting and programs stay there and maybe the old contacts stay there too and this is the reason why now concacts dont working.
But i dont know how i can format or delete all data in my storage. I have qtek 9060 and the soft reset is the same as hard reset (some programs not working after reset but nothing esle)
Click to expand...
Click to collapse
When you upgrade to a new OS version, you always have to format, otherwise you will have inconsistencies in the registry and on the disk.
OK and what i can do with this problem?
ljex said:
OK and what i can do with this problem?
Click to expand...
Click to collapse
A hard reset is not a soft reset, answer is here:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
I know but i have problem with my contacts list and i need help please
ljex said:
I know but i have problem with my contacts list and i need help please
Click to expand...
Click to collapse
Explain exactly what's your contacts list problem and we will try to solve it8
Cheers,
.Fred
When I push Contacts button, display only blink and close. So the contacts list is unserviceable.
ljex said:
When I push Contacts button, display only blink and close. So the contacts list is unserviceable.
Click to expand...
Click to collapse
Use the solution provided on first page, I don't know any other. If you can't do it, I can do it for you, if you don't mind that I can see your contacts!
i have backup files(contacts) from old version of windows. So if u can to herlp me i will be happy .
And dont mind that u ll see my contacts
Here is my icq number i think that this way is better than forum
195 046 465. Thanx
ljex said:
i have backup files(contacts) from old version of windows. So if u can to herlp me i will be happy .
And dont mind that u ll see my contacts
Here is my icq number i think that this way is better than forum
195 046 465. Thanx
Click to expand...
Click to collapse
I don't use ICQ, but you can send me pim.vol by mail, I will send you the corresponding backed up files that you will have to reload on your ppc using ppcbckpcontacts...
Cheers,
.Fred
can u write me your email?
ljex said:
can u write me your email?
Click to expand...
Click to collapse
if you click on dotfred next to the green led, you will see a popup menu, then select send an email. Anyway, here it is mailto:[email protected]
thanx. i sent you pim.vol and contacts backup
I tried using Total Commander to backup and restore. It worked fine in one machine, but when I try to restore the backup from my old PPC Phone to my new PPC Phone, it doesnt work and it happened just like that too...I tap Contact and it flashed and disappeared.
hi all!
i have my pda asus 632n in Chiniess language, need to change it to english at least. the pda's rom is V03.0616.00 CHS 0804. Red big ammount of forums, but those advices which were found don't fit new rom v.30616. On support.asus.com there are some roms for asus 632, but more older version (v.30607) Tried to hack upgrade tool.exe as some people offered, but nothing solved.
For info: the last rom for such as asus 63x goes with two files Update.cap 38,1 mb and Upgrade Tool.exe 19,5 kb. The last one is a romloader - checks language, version of current pda's rom before upgrade. The solution of upgrade is: format SD to FAT, put files above into root of prepared SD, plug SD into pda, execute upgrade tool.exe
When i do such way without hacking upgrade tool.exe, i'm told as language not match! if i hack upgrade tool.exe, then there is "your version is more older then pda's one" on the screen.
There was the thread in http://www.wormholecreations.com.au/wc/megabbs/forums/thread-view.asp?tid=3969&start=81&posts=99, followed right direction of this topic, but it's holded for now
According to my expirience and words of others there is two ways to solve the problem:
1. Wait until new rom upgrade from asus support for v.30616 (may takes much time)
2. hack upgrade tool.exe to remove notice about version
Anyway, does anybody have expirience in hacking plz help to resolve the problem. I guess there are many people who you would help to!
any news, guys?
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
oneiros eidos said:
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
Click to expand...
Click to collapse
let me thank you lots!! today i will try, hope everything gonna be alright with my 632N. if the test will pass, you are a hero
weltom said:
if the test will pass
Click to expand...
Click to collapse
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
P.S. To all others, except weltom:
Hey! STOP SENDING ME ALL YOUR "UPGRADE TOOLS"
Just read the whole topic.
oneiros eidos said:
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
Click to expand...
Click to collapse
if you have icq number, please send me to [email protected]. I have tried to use patched upgrade tool.exe by your programm and by simple changing hex code, and it both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
weltom said:
both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
Click to expand...
Click to collapse
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
oneiros eidos said:
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
Click to expand...
Click to collapse
There are screenshots of the error exceptions. Please, check the e-mail. If somebody need to see the pics, please tell me, course i can't prepare them to the proper size allowed here in the forum
For all, who might be interested.
weltom's problem now solved, but it was a little tricky
It should be no problem to flash to english from russian or to polish from german, etc, just follow link above.
Erorrs may occure with chineese firmware and may be some other asian ROMs due to different file structure for such ROM-images.
oneiros eidos said:
weltom's problem now solved, but it was a little tricky
Click to expand...
Click to collapse
Let me honestly thank oneiros eidos much for his help!! We have to help each other, that's why ask questions here and we altogether solve problems, or try at least.
Can you make it work with the latest update? The one that upgrades to WM6.
Thank you!
I'm receiving a lot of "can you patch that new upgrade tool"-letters.
Sorry, but, now, when i have already sold my A636... No, i can't.
Without device, i can't test my assumptions about "may be that way it will work", so i stopped trying to do anything with new "upgrade tool" utils.
Also, Asus have changed some things in their "upgrade tool", so old methods became useless.
The only thing, that i may advice to all, who really wants to patch that new upgrade tool, is to get latest version of IDA (Interactive Disassembler) and try to do it by yourself (or, may be, some of your frinends, who more skilled in such things).
P.S. As another option for some devices: first flash it from WM5 to WM5 with desired language, then flash to WM6. The only problem here is to find that old WM5 firmware.
Thanks for your reply to this forum Oneiros.
I've just downloaded IDA Pro v.5 and will try to dissassemble the latest Upgrade Tool by myself. I used to do lots of disassembling on PC platform, but never on XScale ARM platform. I just pray it is not that different from the one I know.
I will post my findings here...
Also guys, if you have links to old WM5 firmwares for A632, 636 and especially 639 (the model I have) if you could post them here, that would be greatly appreciated.
Best Regards,
Sasovics
Folks,
I managed to download IDA Pro v5 and I was able to disassemble the old Upgrade Tool (for WM5) and I got the the same offsets as "oneiros eidos" mentioned on his web page, and manage to change the instructions to bypass the mentioned checks, but unfortunately I am not able to disassemble the new Upgrade Tool.exe. Either Asus has protected their file in some way or my disassembler doesn't do the job for this file.
If anybody has a suggestion, let me know.
Best Regards,
Sasovics
Little something about language check in new "upgrade tools".
If you look at disassembled executable, you'll see two interesting registry paths:
HKLM\nls\SystemLCID
HKLM\nls\DefaultLCID
I assume, that if you change both of them them to 1033 (english) with any hex editor, (may be Resco Explorer registry plug-in), and then try to flash, it may work.
Don't forget to write down the old value and restore it, if i'm not right.
Hi all
I tried to modify the registry values with Resco Explorer plugin, changed them to 1033 and restarted the PDA. It doesn't work. This is the message I see : "Open Upgrade image file Error".
Tested on A636N.
Greets.
Hi again
In fact, it partially works. You don't have to reset your PDA or the values you've just modified will be restored. Files have to be placed at the root of the SD card.
Then, when I launch the updater, I see a progress bar and my pda is reseted and restored to factory defaults
So it just reset your device but didn't upgrade to WM6?
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
pitou74 said:
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
Click to expand...
Click to collapse
On my PDA it`s the same problem!
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun
Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip
thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend
does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos
Thx mate
Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude
casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos
HI,
guys i am new with my i-mate jasjam(herm 100).. and i had a problem with my sms service. i was not able to send sms with any sim card. so i installed some titanium edition wm 6.5 rom(previously i had wm5). and when i sync it with my pc i found that it was a trial version and it expired now giving me a white screen written
"this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our costumers.
to obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release."
now i am not able to access any thing on my i-mate. even active sync is not able to synchronize with the pc.
i only want install a good windows(rom) in it. so can any body help me with this problem of mines in easy way.like giving me a direct link to official rom and instructions to install it,,,
thanx a lot!!!
found the solution but still need help
i got the solution for expired version from another xda thread. hard reset did the job.
but i still need a official rom.wm 6 or latest.if dont than atleast please give me some link for wm5 official rom. i dont want to play with roms just give me a rom with which i can use my i-mate jasjam peacefully and also i can send sms to my friends... please help me thank you!!
AT&T
Here, Official wm6 AT&T
Here for Official HTC WM6 Rom all links
1 more question
THANX A LOT IRFAN. I GOT THE ROM EN IM DOWNLOADING IT NOW...
just tell me few things more, what is AT&T.
and what does radio ver means??
still having the same problem!!!
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!
umair muddassir said:
guys ive tried installing a new rom (i;e wm6)en it is working perfectly fine.
but my sms problem is still not solved. i can receive sms but cant send it.
any body knows what should i do????
plse help me!!!
Click to expand...
Click to collapse
Use this. It's a cab file so just install it, then run the program. Use your current network.
What happens sometimes is the proper settings are not set up, so you end up with your situation.
need that apllication for wm6
thanxxx for the rply,
i tried that software but it is not displayed any where, while installing it gave an caution that it was designed for previous windows.
so i got the name of it (i;e htc your application name). ill search for it on net for wm6.
please if get it from some where so do post the link. thanx a lot.
extra info
and just for more info i am using gsm prepay network, company name ufone!
waiting!!!!
comon guys waiting impatiently for ur replys....need help here!!!
try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.
xPreSiDenT said:
try playing with the msg settings in schaps advanced config. check to see if the sms access number is correct.
Click to expand...
Click to collapse
what is schaps advanced config???
en sms access number is correct ive seen it!!!