Operator Name - P3600 ROM Development

I have searched the forum but I can't find anything relevant for WM6.
my operator shows on the Today Screen as "UMTS 3" and I would like to be able to change to read "Three 3G" or something like that.
Is there a way in WM6 this can be done?
I am using the Official AUS WM6 ROM from HTC.

Try to update the following registry settings :
\HKLM\Software\OEM\RIL\ShowSPN=0 (instead 1)
\HKLM\Software\OEM\RIL\ShowSPNOnly=0 (instead 1)
And perform a soft reset.

There's a program called opmon from emunutz that lets you call it whatever you like.

use the network wizard...will sort it out for you
did for me on orange

liamhere said:
use the network wizard...will sort it out for you
did for me on orange
Click to expand...
Click to collapse
The network wizard only lets me select between carriers, not to rename the carrier, which is really what I want to do.

Here the program http://forum.xda-developers.com/showthread.php?t=323750

Related

1.40.00 Asian WWE O2 ROM GPRS Glitch

I found a glitch I've been trying to work around. I use an XDA IIs from O2 with the current Asian WWE O2 ROM in English ;-). Well if I connect to GPRS and use the internet for whatever amount of time I need it for, and disconnect, connect again, and disconnect, it will eventually freeze up the connection when I try to connect again. Either way after like 3 GPRS usages I must softreset in order to connect to GPRS, anyone have this same problem? I would like WM5 but I've upgrade and downgraded 4 times, its just not for my phone, its too slow even with overclocking.
i had the same problem~
and found this as the solution from somewhere in the search
PeterW said:
Here is a step by step instruction:
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is OK. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
- Peter
Click to expand...
Click to collapse
Hi there,
I posted a problem today that doesn't sound quite like the one above.. but maybe it is... please read my post (don't want to make a mess by posting here too) and let me know if you think the caller id could the issue.
Thanks.
http://forum.xda-developers.com/viewtopic.php?p=181358
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
weasel said:
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
Click to expand...
Click to collapse
So far... soooo good. Strange that caller id would cause the issue. I also downloaded a "Keep your GPRS connection alive" app from another posting. That may be helping as well. Either way, no headaches thus far.
Thanks!

Change from JP to EN for use in Japan?

Just went to the Softbank store (formerly Vodafone Japan) and saw the X01HT (Hermes). It looks great, but it is WM5 in Japanese. I have read a few posts about needing a new ROM to change languages. Is this something I could realistically consider?
For all you experts, will any of the existing (cooked, baked, whatever) English ROMs work on the Softbank version of the HTC hermes, and still have the device function as a mobile phone in Japan?
If yes, then I will pour through the site some more to figure out the details.
TIA
Read Upgrading FAQ #1 on the hermes wiki, it answers your question:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Then download any english rom for the Hermes from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
And read upgrading FAQ #5 if your device has a non-english keyboard.
According to some Japanese people who bought SoftBank X01HT, it has special protection that avoid booting without effective SoftBank SIM card, and uses new access point setting for flatrate internet connection.
Worse than all, it CANNOT unlock with imei-check.co.uk or any existing unlock solution!
I guess all settings may be contained as CAB file in Extended_ROM, however still I never confirm and get it yet, since I have no plan to buy X01HT (I already have another Hermes).
If anybody who have X01HT read here, please upload the contents of Extended_ROM into ftp://xdaupload:[email protected]/Hermes/
So as of now, I DON'T recommend to update (change) Japanese to English ROM, until more information about X01HT are collected, especially how to restore connection setting and bypass SIM-absent protection.
FYI... the "PC Site Direct" of SoftBank is Japan's first real flatrate internet for 3G mobile without WAP proxy.
You can use Skype or video streaming unlimitedly, however it blocked SSL and some TCP ports (not confirmed all ports yet), so you cannot use Direct Push and wireless ActiveSync with Exchange Server (SoftBank said they will support Direct Push in near future, however...).
softbank X01HT with EN ROM
kyunga said:
According to some Japanese people who bought SoftBank X01HT, it has special protection that avoid booting without effective SoftBank SIM card, and uses new access point setting for flatrate internet connection.
Click to expand...
Click to collapse
Thanks for your warning. But I'm not sure if my situation is the same. I want to use the X01HT with a Softbank SIM card and EN menus. Will installing Extended ROMs for English work with me in that situation?
Quick answer is no. You cannot change the ROM of X01HT yet. Wait until someone finds the way.
Please Excuse my Ignorance, but HOW do you flash a ROM?
pof said:
Read Upgrading FAQ #1 on the hermes wiki, it answers your question:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Then download any english rom for the Hermes from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
And read upgrading FAQ #5 if your device has a non-english keyboard.
Click to expand...
Click to collapse
Hi, I have been reading all about upgrading Extended ROMs for the last hour, I have downloaded JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship and am ready to flash my unlocked X01HT, but I can't figure out how to actually do it?
Is it done in ActiveSync? Because my version is in Japanese and nothing shows up on my computer. If there is a separate utility, please point me in the right direction. There isn't a readme in my ROM file.
TIA
mixersoft said:
Hi, I have been reading all about upgrading Extended ROMs for the last hour, I have downloaded JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship and am ready to flash my unlocked X01HT, but I can't figure out how to actually do it?
Is it done in ActiveSync? Because my version is in Japanese and nothing shows up on my computer. If there is a separate utility, please point me in the right direction. There isn't a readme in my ROM file.
TIA
Click to expand...
Click to collapse
your comment says that you do not know what you are doing... upgrading the ext rom and burning a rom are totally different things.
anyway, i suppose you wanna burn another rom. rom files are usually archived. just uncompress the archived file to get all necessary files. then, run ROMUpgradeUt.exe and follow the instruction.
if you do not understand the instruction completely, you might better consider giving yourself a second thought before you make it a brick... softbank might charge you the full price of the unit (85,000 yen?) for repair or exchange in the worst case. just a kind warning...
i recommend you read wiki well until you understand basics... good luck.
mixersoft said:
Is it done in ActiveSync? Because my version is in Japanese and nothing shows up on my computer. If there is a separate utility, please point me in the right direction. There isn't a readme in my ROM file.
TIA
Click to expand...
Click to collapse
what you did is not clearly explained.
nothing shows up when you do what? there is no separate utility. everything is stored in the rom archives.
good point. there was no readme in the docomo archive, either.
qtotter said:
your comment says that you do not know what you are doing... upgrading the ext rom and burning a rom are totally different things.
Click to expand...
Click to collapse
Now that's a reply I can use. My mistake was assuming that the Extended ROMs includes the ROM, but it turns out it's the other way around. Now that I downloaded the ROM, all is clear.
Thank to all.
mixersoft said:
Now that's a reply I can use. My mistake was assuming that the Extended ROMs includes the ROM, but it turns out it's the other way around. Now that I downloaded the ROM, all is clear.
Thank to all.
Click to expand...
Click to collapse
cool. hope you have successfully changed the rom, and started enjoying x01ht in english;-)
it worked
qtotter, thanks for your help. I am now seeing English on my X01HT!! But there are a few more outstanding issues I need to address, which I will ask here, and then continue to search for an answer:
Q: Activesync on my desktop is still in Japanese. Anyway to convert that to English?
I'm basically following the steps dandare123 and you outlined to switch to English. see the post
Q: It's not clear if you let the iMate extended ROMs install or not. I did. Then I moved the Softbank extended ROMs to the extended ROM folder and hit 'autorun'. Both times the installer seemed to hang at the very end, and I just reset. the Hermes seemed to be working, but I don't know if I am missing anything important. Thoughts?
Q: I installed Skype and made a skype call. Worked fine, except the output went to the speakerphone and I couldn't switch to either the earpiece or the bluetooth headset paired in headset mode.
Q: speaking of bluetooth, I can pair my headset, but can't seem to get audio onto it. I haven't tried just the phone to the bluetooth headset, but should I be able to get the system audio onto the headset?
Many thanks in advance.
mixersoft said:
Q: Activesync on my desktop is still in Japanese. Anyway to convert that to English?
Click to expand...
Click to collapse
uninstall japanese activesync. download english activesync from microsoft.com and install it.
mixersoft said:
It's not clear if you let the iMate extended ROMs install or not. I did. Then I moved the Softbank extended ROMs to the extended ROM folder and hit 'autorun'.
Click to expand...
Click to collapse
autorun is used when you hard-rest the device. if you want to use softbank ext rom, delete everything in the ext rom, copy all the files from softbank ext rom files to the ext rom, and perform hard-reset. (although i don't understand why you need softbank ext rom...)
mixersoft said:
I installed Skype and made a skype call. Worked fine, except the output went to the speakerphone
Click to expand...
Click to collapse
that's normal. pocket skype does not support phone speaker or bt headset yet.
mixersoft said:
Q: speaking of bluetooth, I can pair my headset, but can't seem to get audio onto it.
Click to expand...
Click to collapse
i would say bt is so complex... anyway, check what you called "my headset" and its supporting profiles. if it supports A2DP, you can use it as stereo audio headset. if not, it is a headset you can use as a mobilephone speaker and a microphone.
btw, hermes A2DP is great! it was much better than i expected. i can use a bt headphone unit i bought for my ipod!!
http://www.mobilecast.co.jp/en/products/handsfree_earfone/mlinkr_series/index.html
thou, i could not use it with htc universal (qtek9000.)
qtotter, you have been so helpful. I'm going to search for a new BT headset with AD2P profile for skype.
So my one remaining problem is that I can't connect to Softbank's 3G network. I was following the instructions as detailed by dandare123 in a separate post, link above. I just repeated everything in the following order:
- flashed the with (iMate) JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
- reset before the iMate ExtendedROMs were installed (because it hung the first time)
- installed the it4Cat tweaker to unhide the /Extended_ROM folder
- copied the Softbank ExtendedROMs over to the /ExtendedROM folder
- and 'autoran' the Softbank ExtendedROMs to a successful completion.
This time, I noticed that the softbank connection was automatically installed, with the APN=open.softbank.ne.jp. I'm assuming that the password is correct.
But when I try to access the internet via Softbank, I get "Cannot Connect for an unknown reason..."
Any ideas? should I run the iMate Extended ROMs?
TIA.
mixersoft said:
I just repeated everything in the following order:
- flashed the with (iMate) JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
- reset before the iMate ExtendedROMs were installed (because it hung the first time)
- installed the it4Cat tweaker to unhide the /Extended_ROM folder
- copied the Softbank ExtendedROMs over to the /ExtendedROM folder
- and 'autoran' the Softbank ExtendedROMs to a successful completion.
This time, I noticed that the softbank connection was automatically installed, with the APN=open.softbank.ne.jp. I'm assuming that the password is correct.
But when I try to access the internet via Softbank, I get "Cannot Connect for an unknown reason..."
Click to expand...
Click to collapse
go to setting > connection > grps setting to make sure it's been set pap.
qtotter said:
go to setting > connection > grps setting to make sure it's been set pap.
Click to expand...
Click to collapse
Check. It's set to PAP. Is there any chance one of the iMate ExtendedROMs needs to be installed? That seems like it's the only thing that I may have done different from dandare123.
everything else seems to be working fine.
mixersoft said:
Check. It's set to PAP. Is there any chance one of the iMate ExtendedROMs needs to be installed? That seems like it's the only thing that I may have done different from dandare123.
everything else seems to be working fine.
Click to expand...
Click to collapse
that's funny...
ext roms include bug fixes, career settings, and apps provided by careers.
i don't think ext rom has something to do with the internet connection in your case since i have been using the open softbank internet access without installing anything from the ext rom.
i manually set up an connection myself, and it works with open softbank perfectly.
if it does not work out on your phone, there could two possible reasons; a) your connection setting is not correct or b) there could be a signal issue in your area.
I just created the following connection manually
APN:open.softbank.ne.jp
ID:open
PASSWD:o z R t 8 n 2 9 R a 1 P s d 0 7
still no go. One thing I notice is that I am on the 'UMTS Vodafone' network and instead of 3G I see a 'U' at the top. Is that correct?
mixersoft said:
I just created the following connection manually
APN:open.softbank.ne.jp
ID:open
PASSWD:o z R t 8 n 2 9 R a 1 P s d 0 7
still no go. One thing I notice is that I am on the 'UMTS Vodafone' network and instead of 3G I see a 'U' at the top. Is that correct?
Click to expand...
Click to collapse
where did you get the Pass for the connection? I will try this tonight on my HTC Universal and on my Hermes when HTC Taiwan will send me this unit back... I could not find it on my X01HT
Also for the unlocking SIM stuff, did someone find out that is the PT_SIMlock_Empty.CAB is for?
mixersoft said:
One thing I notice is that I am on the 'UMTS Vodafone' network and instead of 3G I see a 'U' at the top. Is that correct?
Click to expand...
Click to collapse
This is normale, on both my HTC Universal and my HTC Hermes I have the U of UMTS, the 3G is just a icon tweak.
Daimaou said:
where did you get the Pass for the connection? I will try this tonight on my HTC Universal and on my Hermes when HTC Taiwan will send me this unit back... I could not find it on my X01HT
Click to expand...
Click to collapse
I got the Pass from this post: http://forum.xda-developers.com/showpost.php?p=1038918&postcount=17
part of this thread:
http://forum.xda-developers.com/showthread.php?t=280566&page=2&highlight=softbank+x01ht

Cab Operator settings

Hello :
What do i have to do to put this mms and internet configs atached working on wm6 ? They are from wm5,
Thnks
Copy on your device and than execute the cab file...
Regards,
Primoz
they didnt work..already have done...
Cab to PPC From Windows XP
You don't have to copy the cab to PPC to install the program. You can use this small utility to do the process just like you'll do with .exe files installer.
This utility is posted by Ryubai to PXDXA .
How to:
1. run the command xp_install.cmd inside the cab2PPCfromXP.zip archive to install the utility as a context menu command.
2. when you right-click the cab file,you will see "install to ppc" in contextmenu.click it and a dialog with which you are very simillar pops up......then you know what you should do next.
TQ.
cyphol is there any way to make CAB files like this for any operator?
Regards,
Primoz
Pc78 said:
cyphol is there any way to make CAB files like this for any operator?
Regards,
Primoz
Click to expand...
Click to collapse
There's always a way but you have to know the registry keys involved but I think there're many already floating around in this forum so you can try search for them.
Eh...for the Slovenian operators there are no CAB files...thx anyway
Regards,
Primoz
Hi, i've just upgraded to WM6 (Black Edition v1.1) without any trouble but i can't connect to the internet via internet explorer, i get the message 'cannot connect'. I've download all cabs (extRom and windows) and ran them all. I've downloaded cab2PPCfromXP.zip and ran that on the PC as described, although nothing much happens.
I have noticed after running t-mobiles cabs that instead of '3G' i now get 'E' which seems a step back.
If i Hard reset my device, can some give step by step directions to me having a normal UK T-mobile phone. I mainly use my phone for emails so i really need this side to work.
Cheers
cyphol said:
There's always a way but you have to know the registry keys involved but I think there're many already floating around in this forum so you can try search for them.
Click to expand...
Click to collapse
I am currently in the stage of making cab files for all the operators, please PM me your carrier settings, aswell as mms settings, and your carrier name.
I will make a cab for that operator.
johnk1973 said:
Hi, i've just upgraded to WM6 (Black Edition v1.1) without any trouble but i can't connect to the internet via internet explorer, i get the message 'cannot connect'. I've download all cabs (extRom and windows) and ran them all. I've downloaded cab2PPCfromXP.zip and ran that on the PC as described, although nothing much happens.
I have noticed after running t-mobiles cabs that instead of '3G' i now get 'E' which seems a step back.
If i Hard reset my device, can some give step by step directions to me having a normal UK T-mobile phone. I mainly use my phone for emails so i really need this side to work.
Cheers
Click to expand...
Click to collapse
It's sometimes about wrong configuration of mobile ops settings you entered into the PDAs. So, make sure that everything typed in is correct.

O2 Cosmo (Excalibur) ROM Update - How the Hell ?

Hello Experts,
i have read a lot of the Threads here, but i can't find a good information
about my O2 Cosmo. My Dash is Simlook free and SuperCID enabeld.
I found this instructions:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse
When i edit the .NBH file, i get a "ERROR 270" message!
When i dont edit the .NBH file, i get a "Invalid Ventor - Error Message"
I try to install this ROM:
"RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe"
So my Dash is a German Device, and i want a German ROM, if it is possible!?
OK, i try to go manually in the Bootloader modus, disable ActiveSync for
USB Transfer...and run the RUU Rom...but it allways break down the flash
process at 4% !
...mmh...have i forget any info, that you can help me...i dont know?
Ah Yes...i read in the Thread:
"How to flash a new ROM to your Wizard... a little tutorial!"
Here the link to:http://forum.xda-developers.com/showthread.php?t=298613
But i can see anything on the starting screen, if my dash ist a G3 or G4,
on my start screen ist "ABSOLUTLY - NO - Information" about it!
In the "System Information" i found a RIL Nr. 2.0002 ...
So i think my dash is a IPL/SPL G3...but i dont know it really!
I dont know what i can do anymore, to update my device to WM6.0 or 6.1
Plz, if anyone know what i can do, to fix my problem, plz then tell it to me,
thank you very much, and forgive me about my bad english!
Ok, i test many times this tool "Excalibur USPL- CID BYPASS" ...and yesterday
it works suddenly...i dont know "why" it works, i have done the same, like
every time i try it, but yesterday my dash move to the needed "WHITE
Screen"! And so i able to run the Rom Update, and it works fine!
Ah yes, my Phone tell me i'm in "SuperCID" Mode...so "WHY" i must use
this "CID Bypass Tool" ....crazy??? Or is my Phone a Liar...?
I have now installed this Rom, it Works a bit faster i mean:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe
But it is the same Rom Vers, like my old O2-Cosmo Rom, WM5.0 (1) with
Future Pack. But i have now the HTC Splash Screen!
So i want now to install this Rom (with WM6.1) :
"NoThrills_WM61_GER_V3.exe"
This is a "Kaiser" Rom... "Warum eigentlich Kaiser, hat der Beckenbauer damit
was zu tun...*g*
But when i try to run again the "Excalibur USPL- CID BYPASS" tool, my
dash show me only the "Linux Monkey" (Pinguin) Screen and hang up the
Phone, so that i must remove the battery....
The "White Screen" (that is the Screnn you must have to flash your Rom),
will dont come anymore....i dont know how...??? I start this batch file,
"Uspl.bat" ... and follow the instructions....mmh....allways i get the Linux
Monkey Screen...and not the white screen, "WHY" ?
Anybody a hint, how i can move into the "White Screen" Modus?
And a Question, is this Kaiser Rom compatible to my HTC S620 ?
Please belive me, i read a lot here...but i cant figure out this..., this Forum
here is a bit confusing, on many Threads you can read other informations!
Plz anyone, tell me (who know it) how i move exactly in the White Boot Screen?
Thank you!
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
drkfngthdragnlrd said:
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
Click to expand...
Click to collapse
Thank you!
But "NO" i don't flash my HTC S620 wit a Kaiser Rom..."What a Luck" ...i try
to do it...and now im Happy that this have not work for me!
I actually install this Rom:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.9 0_Ship.exe
I have now understand, what is a Kaiser ROM, it is the Device Name, oh
Man...i'm so a dummy....haha...
But i have a success, i change my O2 Rom to a HTC Rom
The Question now is, how i move in the "WHITE BOOT SCREEN" ?
That i'm able to Update my Rom to a WM6.1, if posible, a German 6.1 Rom.
Is here a German WM6.1 Rom?
Is a WWE a Multilingual Rom, is in such ROMs German Language included?
And how i can remove the CID forever, so that im able to update a ROM
without a CID Bypass Bootloader?
Any ideas?
The thing is, ...this CID Bypass Bootloader work "ONCE" and now that
Bootloader dont work anymore...i dont know why...i get only the Linux
Pinguin Screen...and this is a "Hang up Screen" so that i must remove
the Battery, for a new start.
But i get nevermore the "White Boot Screen" ...how is this posible?
I do the same, like before i do...mmh...???
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
drkfngthdragnlrd said:
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
Click to expand...
Click to collapse
Thank you,
but i try to run the "CID Bypass" but the "CID Bypass" run every time
into the "Linux Pinguin Screen" ...(i think it is programed in Linux?)
But the same "CID Bypass Bootloader" - work - for me "once" !
But now, not ! I dont know why?
With this CID Bypass Bootloader, i flash my Q2 Rom into a HTC Rom !
But that was only possible, as my dash move with this "CID Bypass Bootloader"
INTO a "White Boot Screen"...!
But "HOW" this was possible...i dont know...now this CID Bypass Bootl.,
wont work anymore....
You know what i mean?
The same tool (CID Bypass) wont work anymore, it work one time only.
When i now try to run this CID Bypass, i get a "Linux Pinguin Screen" in
Black. So there is a little Linux Pinguin "Preloader" ...and then the Phone
have a SOD..."Stand of Death" you Guys call that so, i think so!?
To search here, is very strange for me....i get results of all Forums here!
That was the reason why i want to try the Kaiser Rom, while i search
here in the Excalibur Forum...so i had think so, that was wrong, you know!?
Sorry, my english is not good enough to tell exactly my expirience!
But Thank you for Advice!
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
drkfngthdragnlrd said:
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
Click to expand...
Click to collapse
...no no, this ROM runs great! I have no Problem with this Rom!
But i have found a Solution "Yeah" !
For all who want to flash a O2 Cosmo!
Try this Link: Click
Thanks to the Uploader, found it by searching!
The last in line: "Unlock_phone_files.zip" !
Follow the steps in the text document!
Work fine for me!
But when you want to flash, and you get a connection ERROR, remove
the USB cabel, and put it back on your Dash, and run then only the
"ROMUpdateUtility.exe" again and it will work.
(Your srceen are allways WHITE!!!)
I had flash for 10min the "RUU_Excalibur_SPL-1.11_UpgradeOnly.exe"
You must extract the exe file, and copy the *.nbh file to folder 3!
After you run the "Auto.bat" and the Connection Error, click finish,
remove the USB cabel, put it back on the dash and run again and only
the "ROMUpdateUtility.exe" !
All work fine!
Thank you Developers!

o2 Graphite build WM6.5English beta1!!!!!

Greetings to all!!!I represent you first the european the build WM6.5 Standart,language,only english!!!!!It is made on a basis OEM-parts from WM6.0 O2 UK,with kitchen use amazingosp from is forum ioicn.com.cn,build OS has given ALEUT from is forum wce.by http://www.4shared.com/account/file/134858805/26201766/WM65Eng.html The problem with the chamber is solved. The reference has updated.
I tried using this and got nothing. It seems to be running, but doesn't flash the phone. What's the deal with the WM5storage .jpg? The instructions are not in English so is it prompting us to use a particular setting? When it apparently finishes, it just sits there waiting for the phone to reboot, which also never happens...Try again please, or post some instructions.
drummer10630 said:
When it apparently finishes, it just sits there waiting for the phone to reboot, which also never happens...Try again please, or post some instructions.
Click to expand...
Click to collapse
This ROM intended for loading with use usb-cable.When phone is switched off,do so as for loading from a flash card.After phone will enter in flashing mode,connect it to the computer and also start "ezboot.exe".Jupiter.abi&Jupiter_SPBL.abi files,should is in one directory with ezboot.exe.I hope, will understand further
cubaseda said:
This ROM intended for loading with use usb-cable.When phone is switched off,do so as for loading from a flash card.After phone will enter in flashing mode,connect it to the computer and also start "ezboot.exe".Jupiter.abi&Jupiter_SPBL.abi files,should is in one directory with ezboot.exe.I hope, will understand further
Click to expand...
Click to collapse
So do you mean, start the phone in Bootloader mode, and run the ezboot.exe file?
drummer10630 said:
So do you mean, start the phone in Bootloader mode, and run the ezboot.exe file?
Click to expand...
Click to collapse
Yes,so
Ok, It works. Here's how I accomplished it, and some of the features you will find in this rom. I used WINXP Pro SP3.
1. Disable (uncheck) "Allow USB" and "Allow Connections to one of the following" (Comm Ports) settings in Active Sync 4.5
2. Double click the EZBOOT.exe and then click the NEXT button (it's in a language that my computer can't read, so just assume the NEXT button is on the LEFT).
3. With the unit off, and the sim inserted, but no storage card, insert the USB cable and hold the joystick to the DOWN position (this is where many get confused, its the down or south direction, toward your body, NOT pressed IN), and press the power button at the same time. You will see it enter bootloader mode, and it says updating on the phone screen.
4. Now click the NEXT button on the EZBOOT program and it will flash your unit.
5. It took about 15 minutes and I was using a UK version O2 XDA Graphite, with the official WM6 O2 rom.
6. You will see red and green bars going left to right on your phone. Don't panic, it's normal.
7. It seems to finish the last bit faster than the rest, and reboots to the normal O2 Welcome screen, and then a NEW ORANGE Windows 2nd screen, then to the setup screen, with all the normal options.
8. The default homescreen is called Sliding Panel, and there is another new one called Sliding Panel Media which adds shortcuts for playing music, and viewing photos. I am sure someone has written a review of WM6.5 so I will leave the other descriptions for other websites.
A few notes:
it uses bootloader Eboot ver:UK_V3.4.0_XB FUU
and it SAYS you will be flashing OS M_V6.1.0_SZT_080320 and
RADIO V3.17.2 P10_2008-03-20 but I ended up with
RADIO V 2.17.2 P9_2007-06-11 so I guess my radio didn't change? No problem, I made sample texts and calls with zero issues.
The threaded text messaging is kinda cool and the sliding shortcut functions of the homescreen is handy...
In Settings/About it reads: Windows Mobile 6.5 Standard CE OS 5.2.23017 (build 23017.5.3.0). I am guessing that a hard reset will change my radio, but I will leave it for now, as it seems to be working ok. Thanks to cubaseda for the rom.
cubaseda said:
The problem with the chamber is solved.
Click to expand...
Click to collapse
Thank you for the rom and fixing the issue with the camera. I used a regeditor to disable threaded SMS and to allow for Sent Messages notifications.
Can this be used in o2 graphite Asian? Please suggest
tigerstigers said:
Can this be used in o2 graphite Asian? Please suggest
Click to expand...
Click to collapse
If you try it and it doesn't allow you to flash, then the answer is still Yes, if you use ResHacker, and Open EZBOOT.exe in Reshacker.
Then modify the part of the package which is responsible for telling you that the phone you plugged in is not an XDA Graphite. And its actually correct, as the device name for Asian graphites is something like "O2 Graphite" not "XDA Graphite" which is what the installer is expecting. SO - Expand the node in the tree on the left that says "String Table" and then expand the node "3". Click the "1033" node, and you'll get some text displayed on the right. Look for a like that says: 34, "Xda Graphite" and change it to your device's name so it looks like this: "34, "O2 Graphite".
Click File -> Save As and save the updated package as something like UpdatedInstaller.exe.
tigerstigers said:
Can this be used in o2 graphite Asian? Please suggest
Click to expand...
Click to collapse
Yes, can. My phone Asian
Oh cool i wondered if there would be a ROM for this cool phone. I been looking for a while now. I will test.
Would be great to see more roms for this phone. I will test all new roms.
Hmm, i use windows 7 and tried this flash every way, it starts to flash then errors after 5 mins and doesn't do it. When it errors the usb makes a noise so it is like it stops communicating so not to flash. I'll have to flash on a m8's pc.
............
I got it upgraded successfully. Thanks a lot
o2 menu is not working post upgrade. Is there a way i could install the menu seperately.
Appreciate your help
tigerstigers said:
o2 menu is not working post upgrade. Is there a way i could install the menu seperately.
Appreciate your help
Click to expand...
Click to collapse
Excuse, but this ROM is positioned as WWE, instead of for services o2.
thx to sharing
a very good upgrade for graphite but without oem apps like o2 menu and o2 config
thanks for this rom
hope we can get another version with o2 oem apps
Tabbe said:
a very good upgrade for graphite but without oem apps like o2 menu and o2 config
thanks for this rom
hope we can get another version with o2 oem apps
Click to expand...
Click to collapse
This ROM requires completion.For those services O2 are necessary to a clod, i will lay out the special version later.Personally to me, it is not necessary,since in Russia and the adjacent countries there is no operator O2,and I consider the smartphone as Asus Jupiter
cubaseda said:
This ROM requires completion.For those services O2 are necessary to a clod, i will lay out the special version later.Personally to me, it is not necessary,since in Russia and the adjacent countries there is no operator O2,and I consider the smartphone as Asus Jupiter
Click to expand...
Click to collapse
no offence but your title of this post is also O2 Graphite as this model is sold to O2 from Asus.
as O2 Asia release xda graphite, it comes with o2 oem apps, its great to have more support than just microsoft default menu screen

Categories

Resources