Related
I looked around and did not see a clear answer to the question of reverting/flashing back to WM5 if desired after flashing one of these WM6 ROMS.
Does anyone know where I can find the answer?
Thanks in advance.
I too have looked around but haven't asked for fear of being flamed. The gurus think that we should be able to pick up on all the lingo and have a clear understanding of what everything means.
I am looking for a way to go back to a shipped ROM from anything after flashing SPL 1.11 in case I need to warranty exchange my Cingular 8525. I have yet to figure out how to do it.
euth said:
I too have looked around but haven't asked for fear of being flamed. The gurus think that we should be able to pick up on all the lingo and have a clear understanding of what everything means.
I am looking for a way to go back to a shipped ROM from anything after flashing SPL 1.11 in case I need to warranty exchange my Cingular 8525. I have yet to figure out how to do it.
Click to expand...
Click to collapse
Yes. You can go back to WM5 from WM6. I have done it before with no problems. Your answer is once again yes!
I will not flame you but look harder.
wildbilll said:
I looked around and did not see a clear answer to the question of reverting/flashing back to WM5 if desired after flashing one of these WM6 ROMS.
Does anyone know where I can find the answer?
Thanks in advance.
Click to expand...
Click to collapse
I am feeling kind tonight!
Look here:- http://www.mrvanx.org/cms/
You two rookies need to stop by:
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
http://www.mrvanx.org/cms/
Hope the hint helps
Oh dear
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
And the gurus have used plain english too! wow!
...but just to let You know..
once You go black (2.5 ), You will never go back...
hi there
first of all, I am no expert in the ROM related knowledge, but i did go back to WM5 from WM6 recently. The reason I have gone back to WM5 it is because I am suspecting the Chinese viewer (CE-Star) that i used does not work good in any flavor of WM6, it causes frequent lock-ups in WM6 that makes my phone pretty much unusable.
Besides, i don't mind to share my experience for downgrading to WM5, the following is my up and down sequence.
1. upgrade from Dopod WM5 rom to WM6 cooked rom
2. upgrade to SPL 1.40
3. upgrade radio to 1.38.00.11
4. upgrade radio to 1.40.30.00
5. upgrade to SPL 2.10
6. downgrade SPL from 2.10 to 1.40
7. downgrade from WM5 Rom (It is some sort of HTC Standard WM5 Rom that my friend gave me, and my radio has gone back to 1.38.00.10 as the ROM comes with it.
8. upgrade to SPL 2.10
9. upgrade to Radio 1.40.30.00
Also, you may check out mrvanx's guide for downgrading to WM5 here.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26
bronx said:
...but just to let You know..
once You go black (2.5 ), You will never go back...
Click to expand...
Click to collapse
actually... i'm on black 2.5 and thinking of going back... too many apps are wiggin out on wm6
I actually just did it. I was running the latest version of HardSPL, flashed to the new ATT ROM, and then created a updater to flash the SPL to the ATT spl.
Wasn't hard, and only took a few minutes. So, as of right now, my phone is running the new ATT ROM, and if I need to warranty it, I'm all set.
in the wiki it mentions..
If your vendor has released you original rom as a shipped upgrade, you just need to flash it.
If your vendor has not released any ROM upgrade yet, you cannot fall back to original ROM easily. You'll have to reconstruct the ROM out of a dumped ROM.
Click to expand...
Click to collapse
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
crabwalker said:
The reason I have gone back to WM5 it is because I am suspecting the Chinese viewer (CE-Star) that i used does not work good in any flavor of WM6, it causes frequent lock-ups in WM6 that makes my phone pretty much unusable.
Click to expand...
Click to collapse
if you only want to read chinese, but not input, there is an alternative to it. look for a cab which is named 'sunglobe.ttf register patch'.
Maybe the easiest way
First thing I would want to do is to Flash the unit to what is known as a "Hard SPL". For some reason it makes all the other flash work go a lot more smoothly. You can get instructions and software for that at:
http://www.mrvanx.org/cms/index.php...ask=view&id=40&Itemid=26&limit=1&limitstart=2
Once that is done, and it should take about 5-10 minutes depending upon the speed of your computer and USB connection, you can load whatever OS rom you desire.
You can get a carrier agreeable rom from the Cingular/ATT site:
http://www.htcamerica.net/support/8525/software-downloads.html
Or, and this should work, just link directly to the rob by clicking:
http://www.htcamerica.net/support/d...R_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe
This should leave you at the latest and greatest of the WM5 packages from Cingular/ATT, and all should be well. And . . . if it hozes . . . which it should not, you should have no warrantee issues since you were trying to flash the upgrade that THEY were providing you. :-D
Laters,
d1eter said:
in the wiki it mentions..
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
Click to expand...
Click to collapse
ROMs from Dopod HK or Singapore are very old ones. The SPL is 1.04. You may not be able to flash backward if you are with HardSPL v7. Also if your radio ROM is newer than 1.27, you may face problem when you flash the original (as it is packed with an old radio rom).
(Please correct me if I am wrong.)
To play safe, follow mrvanx' guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26
d1eter said:
in the wiki it mentions..
I'm using 838pro, what about the ROM which available to download from the dopod company website.
does it safe to just flash from it or do I need to repackage the ROM..?
thank you.
Click to expand...
Click to collapse
After some readings and I have managed to used dutty's tool to recompiled the Dopod's WM5 English rom from the original Dopod shipped rom.
This rom has OS + Extended Rom ONLY.
No IPL, No SPL, No Radio.
I have tested and it works on my Hermes, and Bootloader and Radio stay as is. Please note your result may vary.
Here's the download link
http://rapidshare.com/files/29500131/WM5_Dopod_1.30.707.4__Huchison_3_AU__OS_ExtRom_only.7z
To play safe, I would suggest you to do the following prior flashing the OS rom.
1. Flash boot loader to Hard-SPL-V7
2. Flash your radio rom to 1.38. or 1.40
crabwalker said:
After some readings and I have managed to used dutty's tool to recompiled the Dopod's WM5 English rom from the original Dopod shipped rom.
This rom has OS + Extended Rom ONLY.
No IPL, No SPL, No Radio.
I have tested and it works on my Hermes, and Bootloader and Radio stay as is. Please note your result may vary.
Here's the download link
http://rapidshare.com/files/29500131/WM5_Dopod_1.30.707.4__Huchison_3_AU__OS_ExtRom_only.7z
To play safe, I would suggest you to do the following prior flashing the OS rom.
1. Flash boot loader to Hard-SPL-V7
2. Flash your radio rom to 1.38. or 1.40
Click to expand...
Click to collapse
So in other words: do exactly what my guide says to do?
Why
mrvanx said:
So in other words: do exactly what my guide says to do?
Click to expand...
Click to collapse
Why would anyone want to do that? A tested process that works time and time again?
And if you don't mind the compliment, all of your guides rock!
mrvanx said:
So in other words: do exactly what my guide says to do?
Click to expand...
Click to collapse
Yes, just forgot to mentioned, I ripped the Bootloader and Radio all based on your (mrvanx) guide. It is great, the info provided is easy to follow, very clear and precise. Thanks.
i have lokked everwhere for this so if someone can help with a link or an explaination please help.
I have downloaded the rom. How do i upgrade the rom. Step by step proess please.
Thank you very much in advance.
Step 1: Stop being lazy and do your research.
If you won't find anything, follow the instructions from my Rom:
http://forum.xda-developers.com/showthread.php?p=1187445
aarbiser,
Go the the Wiki page for the Trinity:
http://wiki.xda-developers.com/index...me=HTC_Trinity
Read through this thoroughly before upgrading. The key is to understand how you flash back the ROM you currently have, in case of a problem. Back up everything on your Trinity & storage card before doing anything.
Remember, some of these ROMs don't have all the programs your stock ROM came with. For example, if ROM you flash to doesn't have MSN, which you need, then you'll have to install MSN cab separately, after the ROM flash. Any ROM you flash to is likely to have some issues & no Trinitys have been seen flying or making crop circles after the WM6 upgrade...so be careful with your expectations.
If you aren't sure how to upgrade with these ROMs, wait a litle longer (1-2 months), as HTC will eventually have an upgrade for WM6. The beauty of ROMs on this forum is that they contain many improvements, besides the OS upgrade aspect.
Here's a good step by step site. Its for the Hermes but the idea is almost the same.
http://www.mrvanx.org/cms/index.php
I don't want to be harsh, nor flame anyone, but if you don't understand how to flash a ROM, you really ought to wait till official versions are released, because Beta WM6 (or any other WM version for that matter) ROM's will require some 'expert' registry or system fiddling at some point, which needs a fairly good basic understanding of the systems.
Stoopid noobie question:
cant find any instructions for the hard SPL. On the hermes instructions it only has 2 files but the trinity one has 6 files...
enter bootloader.exe
rapitool.exe
ROMupdateutility.exe
RUU_signed.nbh
RUUGetInfo.exe and
RUUResource.dll
.. i followed this on the hermes guide website but this step here is different to the trinity........
which to use first? do i use them all before installing the new WM6 ROM?
Do i need to install the new radio version (GSM 1.41.00.11)? Trying to make so if i need to get it fixed under warranty i can just flash back the Aussie 3 ROM and they will be none the wiser....
Can anyone help?
How about someone writing a step by step guide for those of us who are yet to do this..... everyone had a first time....
thanks
Scott
ok. i tried to run the ROM update utility but it wouldnt give me the option to change my SPL to 2.1 olipro..... how do i do this?
Cancelled this before i bricked my trinity......
thanks
ok. now i feel really stooopid.....
after doing the above i checked my bootloader and it is now: IPL-0.50 and SPL-1.07.0000
So, i now have hardspl on my trinity?
so to now install the new rom i just double click on the new rom file?
thanks
NeilM said:
I don't want to be harsh, nor flame anyone, but if you don't understand how to flash a ROM, you really ought to wait till official versions are released, because Beta WM6 (or any other WM version for that matter) ROM's will require some 'expert' registry or system fiddling at some point, which needs a fairly good basic understanding of the systems.
Click to expand...
Click to collapse
Anyone created a WM6 ROM that's safe for us n00bs?
Akselp3600 said:
Anyone created a WM6 ROM that's safe for us n00bs?
Click to expand...
Click to collapse
as I know, most of roms are safe. just flash it!
Most of the noobs CAN'T EVEN READ THE STICKY Threads at the top of the forum.
HERE IS A STEP BY STEP GUIDE WITH SCREENSHOTS for you noobs:
http://trinityguides.info
Howd'y just got a new Jasjam Spl is 2.03 how do I go about flashing my rom as the RUU doesn't have my SPl in it ??? Basically I want to updat to CRC's latest
Do some more homework first dude, you dont wanna end up with a paperweight......ALWAYS make sure you have flashed HardSPL before you do ANYTHING.
Take a peek here about what to do: Flashing HardSPL. Then flash away with any ROM you please.
Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one
bongo333 said:
Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one
Click to expand...
Click to collapse
seriously....you DO NOT need/want to be using SPL 2.03....you are increasing the risk of bricking your device...flash hardspl 2.10 to your device then just flash CRCs rom using the utility included with it.
Follow the guide i posted earlier to make your device safe to flash then look in CRCs thread for the files you need to run the ROM.
Bongo333, listen to MrVanx.... You asked the question and he's giving you his expert opinion... Listen to his experience cos god knows his guides have helped me out a lot of times...We don't wanna be answering questions tomorrow about how to unbrick your hermes. Its easier if you listen to experience and have a good time upgading your hermes as we won't knowingly steer you wrong..
Cheers
Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks
paulslee said:
Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
again there is a guide how to downgrade at mrvanx above
test7875 said:
again there is a guide how to downgrade at mrvanx above
Click to expand...
Click to collapse
I've gone through that, but that only gets you to SPL 1.06, which (I'm not sure really) is an older version which wouldn't be recognised by Telstra as genuine?
Thats fine thats a retail one.
You can go to 1.04
its here as stated on this mrvanx page
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Have yout got these page contents anywhere? These links what you write are inactive!
im a newbie to all this flashing and stuff but what i need is
a guide on how to install
[WM 6.1] NEW SWIFTBL WWE DIAMOND ROM V7.0 FULL - CE OS 5.2.20753 (Build 20273 AKU 1.3.3)
yea its easy to say read the phucking manual *RTFM* and all those
Godly phrases but to tell you the true im struggling
im trying to follow this giude and im already stuck at the begining
http://forum.xda-developers.com/showthread.php?t=408109
just to get the Hard-SPL is a blinking nightmare
OliNex Unsigned Hard-SPL (Developers Edition) or jockyw2001's HardSPL 1.24
on the OliNex Unsigned Hard-SPL (Developers Edition) he says
TO FLASH THE NEW Hard-SPL, Select Force-SPL, you should only choose otherwise when recovering your device from an old Hard-SPL version!
Click to expand...
Click to collapse
i have downloaded all software and cant find the Force-SPL
jockyw2001's HardSPL 1.24
the diamond-sspl.bat does not run on my phone
i would love to get this rom on my phone as there is so much good words about it but im a newbie and need an easier guide.
i am hoping some one can show some light and help me (us newbies)
get passed this by providing a simple how to, on how to get this all up
and running
thank you
PS. if you are going to reply with an high and almighty attitude then please
just move on as it requires less muscle energy and provides no solutions
Take a look here:
www.modmydiamond.info
Think it can be helpfull.
Take unsigned HardSPL just to save hassle, just be carefull what roms you flash.
If 20 people succesfully flashed it, so you can.
thanks Riel i be checking that out today
HD
you "newbies" should have just opened your eyes to see the obvious:
http://forum.xda-developers.com/showthread.php?t=416211
i think it's pretty well explained and any new questions should have already found their answers in that thread.
p.s. when i first joined there wasn't such a thread, and i still came through. you don't have to think flashing your rom is mission impossible
@Riel
Can you offer a WWE Rom for us?
Like you said installed by people and working?
Thanks
hi guys
as you can see im a total noob to the forums and to updating ROMs on the diamond
my htc diamond is running rom version
version: 1.37.707.1 WWE
date: 06/10/08
radio version: 1.00.25.03
protocol version: 52.26a.25.09H
i find that phone lags a bit and slows down especially when im unlocking with my password.
it also lags a bit when im activating the keyboard to write a sms..
so i guess i was hoping somebody could guide me in the right direction to get the latest rom update, and how do i do it.
i can see there are some custom roms around...so i have no idea whats the best way to proceed..
ive tried to download the latest rom update from the HTC site but it says that my device is not supported?
i dunno, cause i entered in the serial number located under the battery...
so im hoping somebody here can help me out..
thanks!
subs.
More info...
What's your diamond model number? It's under the battery.
You should look into HardSPL and then check out the official ROM's and Cooked ROM's and make a decision on which one you want to flash your phone with. Read the forum's and how-to's for more info...but first you should work out what version of the diamond you have before you go looking for ROM's...also, always HardSPL before you flash!
Good luck.
under the battery it says
HTC P3700 DIAM100
is that what you are referring to?
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
cobbs said:
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
Click to expand...
Click to collapse
yeah, ive been reading that and im slowly starting to understand what i have to do...
i would like to do this rom update on my phone
http://forum.xda-developers.com/showthread.php?t=423418
so from what i understand i first have to install a unsigned hardspl, any recommendations on which version i should use?
1.23
1.24 or
1.34 ?
i was going to use 1.24 only because i saw somebody post saying they used it and had no problems, but if i should use one of the other ones because it will work better then please let me know.
after doing the hardspl install i was going to backup all my contacts and then do the rom update.
am i missing any steps?
do i have to do a radio update before a rom update?
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Prewien said:
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Click to expand...
Click to collapse
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Substance001 said:
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Click to expand...
Click to collapse
Install hardspl 1.40 or 1.93 (I use 1.93, but didn't have problems in the short time I used 1.40) hardspl and then install any rom you like. Just try to read as much as you can because chances are, any question you have, someone else has had it and it's on the board for you to read.
ok cool, i will install hardspl 1.40 and then that rom i mentioned
at the moment i dont have any questions, i will follow that thread that explains how to update roms and hope for the best
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Substance001 said:
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Click to expand...
Click to collapse
if you brick your phone, the only option left is to claim warranty.
And i believe the only step that could possibly brick your phone is flashing HardSPL, right guys?
I was in the same state of anxiety when I did my first ROM flashing. Thankfully it all went smoothly.
My 2 cents :
1, Think about what you are gaining by a ROM upgrade. If your phone is working well out of the box and your routine functions are satisfied, you are well off with you stock ROM. I flashed a couple of ROMs and now I am with my stock and I am perfectly fine.
2, Read this -> http://forum.xda-developers.com/showthread.php?t=416211 and this -> http://www.modmydiamond.info/ And if you understand every single letter of it only proceed.
Happy flashing
i have a diam100. can i flash it to a WWE dutty rom?
thanks for all the help guys, but i decided to flash my htc with the original rom from the htc site.
for the moment it runs like a dream and has fixed all my lag issues.
so im gonna stick with that....for the moment
It's important that you feel comfortable crossing over......but I have to say, when you decide to cross, it's an exhilarating feeling to know that you can select what ever Rom from, what I think are, top notch chiefs here but also the fun continues by selecting which ever Radio.
Many post on here that say, "I bricked my phone," truly didn't brick anything. They just hit a wall so they panic. Hard SPL really does a good job. So the chances of your bricking this device is not as high as some people think..