Related
I was wondering if the Korean WM2k3 PPC Phone Ed. can be converted to English? I believe I have seen a discussion on this website where someone had successfully converted from Chinese to English and vice/versa? Any help is greatly appreciated. I am looking at some of the awesome Korean PPC's and am hoping to be able to convert it. I just have to make sure it works on 1900mhz so its compatible in the US. Thanks for any help...
asume it's a xda1 then make a english rom in one of the kitchens
and use xdatools to flash it
http://wiki.xda-developers.com/wiki/XDAtools
changing to a rom of another language change the language it's pretty much as simple as that
Thanks. Its great to know that it can be done. Your website is the only place that has said it CAN be done while all the rest said it can't. However, I am an extreme newbie to the PPC and honestly dont fully understand but I will continue to attempt to figure it out. I guess I will see about ordering the LG SC8000 possibly since it works on 1900mhz and can be converted. Thanks....
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
a guide somebody wrote once about how to upgrade a Wallaby device
but if you are very very newbiee then maybe you should have somebody do it for you so you dont ruin the device making it an expensive doorstop
I am a very very newbie due to the fact I have always used Palm which is Kindergardenish compared to PPC. I still think I get the drift on what to do though because it sounds mostly like what you might do with normal windows. This is going to sound extremely retarded but here it goes, do you have to have an SD Card disk drive hooked to your main computer to install stuff on it? I suppose in this case maybe, due to it being in a different language. Anyway, thanks alot. I will let you know how it goes.
helo, i've searched every where but i did'nt found, i want to upgrade to wm6, but before i want to make a backup of ALL (yes, all). for extrom, i think it's ok, but how to backup a rom ?
i've tried a rom dump with "romupdate" (mtty mfc application) to dump rom on my 2go sd card, but no way, this do not want my sd :/
any idea?
thanks
Why not try this
Hi bob_bipbip,
Why don't you try installing a backup utility like Spb Clone and copying all accross - then getting hold of an original copy of your ROM - then if you have any troubles, you could just reflash the ROM, then reclone the software back on with Spb Clone!! (just make sure you use a spare SD card for the new ROM to start with - you need to keep the one with the original ROM EXACTLY as it is now [if there are any programs on it! - otherwise, don't worry])
Happy Updating!!
Bird
Hello, I think that you need this:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=28648
Here (http://forum.xda-developers.com/download.php?id=19) you can download the tools.
Then you only needs to:
- Stop activesync
- Puts BA in bootloader mode
- Connect to the craddle
- Starts romupdate and select WCEUSBSH001
- and TYPE YOURSELF (don't copy&paste, it doesn't work)
-> d2s 80000000 02000000
wait until it finish
-> d2s 60000000 00300000 sd a
wait until it finish
-> d2s 70000000 01080000 sd a
wait until it finish
Once finished the three steps, take the SDCard and put it in a safe place, that is your entire device backup, and softreset your BA.
I've used a 1Gb SDCard, but it must works even with a 128mb.
To restore simply put the sdcard into your BA and put it in bootloader mode, after a few seconds SDCard flashing ask you for confirmation to starts.
I hope I have answered to your question
PS: sorry for possibly grammar and syntax errors, english isn't my best .
Cooooooollllll!
Going to try that myself, thanks kraven!
i've tried this method a long time ago, it didn't work. i'll try again soon.
did anybody here have already done this successfully ?
The Backup-Process works proply, but:
IT ONLY BACKUP THE ROM!!! NOT ALL THE OTHER STUFF (Programs, Connections, Data,..etc)!!!
Dont spend your time: you can reflash every time your ROM with the know methods, dont need this tool for them. The benefit dont works;-(
According to title
Well, on title it says "ROM dump" and this is what the thread teaches... if you mean "Entire PPC backup" u may search another thread =P
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Natureboyhcg said:
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Click to expand...
Click to collapse
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
KK13 said:
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
Click to expand...
Click to collapse
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
WM05 and bootloader only support 2Gb or less though there is an sdhc patch for WM05.
WM06 had the patch to support SDHC cards from 4Gb up to 32Gb. WM6.1 and WM6.5 are also SDHC compliant.
You need a 2Gb or less sd card to flash an OS or different SPL as the bootloader only supports 2Gb or less. Its not upgradeable.
Now that everythings clear as mud,
Cheers...
You could also pick up a 1 gig (or even a 512meg) card on the cheap to do your flashing, and use the 4 gig for your everyday storage in the phone. Then have the best of both worlds!
psylink said:
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
Click to expand...
Click to collapse
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
KK13 said:
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
Click to expand...
Click to collapse
HardSPL only needed to install once, after that you can install whatever ROMs you like many times.
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
ultramag69 said:
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
Click to expand...
Click to collapse
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
StefanHou said:
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
Click to expand...
Click to collapse
Did you try formating the SD card on a desktop (or laptop) computer and not phone with Memaid?? Maybe that has something to do with it. Is it a 2gig card or less than 2 gig??
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
Onya dude .. you have a better way with words !!
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
OK, will find SDconverter and try the suggestion, thx KK and Ultramag
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
zivkong said:
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
Click to expand...
Click to collapse
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
StefanHou said:
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
Click to expand...
Click to collapse
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Man, I don't have a clue. The only issue I ever encountered was thinking my card was formatted fat32 when it wasn't.
I think this is now beyond me.
StefanHou said:
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Click to expand...
Click to collapse
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Also check your spelling of hermimg.nbh as a simple error will screw up everything...
Also put sd card in then reset to bootloader, hold in all the buttons - ok, power and reset with stylus, until the bootloader comes up.
Cheers...
KK13 said:
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Click to expand...
Click to collapse
KK13, Boog and Ultramag
OK this is what I did last night:
1. Flashing to the shipped AT&T Stripped ROM
2. Having it reflashed with the HardSPL V7 (to ensure the file is non corrupted, I re-downloaded it from some links in some thread and check the file size, they are all the same )
3. Reformating my SD Card with PC for FAT32;
4. Copy the nbh file and rename it with HERMIMG.nbh (recheck three times and I think I get it right. btw, is there any different to write it in capital? );
5. Press OK and Power, then stick the reset button.
6. Go to the boot loader (with 'Serial' on ht white screen)
I have Search This forum and I did find anything on it. How do I make a copy of the PDA(xda exec) not the data(Calendar and contacts)but the hole pda so if anything went wrong or I don’t like the new rom I could go back to the original?
Same here. I have my Jasjar on WM5, original ROM (se signature). I am not sure how to do a roll-back in case the flashing goes wrong or just in the event I want my old setup back.
I use Spb Backup to make full backups from my PDA, and store them on my memory card. A long time ago, I needed to send in my Jasjar to the phoen company. They needed to give it an upgrade to fix a bug, iow a new ROM. Once I got it back I did a restore of all data and programs, but this seemed also to have overwritten the ROM again. Or am I just babling now?
Anyway, I would like to try the latest stable WM6 for 64mb Unis, and am preparing myself for the worst. Reason for upgrading is that I find it interesting to read on the forum that the free RAM is more then 20 Mb. Compared to what I have now, this could be the perfect alternative for upgrading to 128 Mb. I have close to none free space for installing aps that can not be installed on the SD (installation in RAM required). WM6 seems to be the solution then.
About a roll-back procedure: will executing my backup.exe do a roll-back after a succesfull flash? What if all fails?
Well if the flashing fails then you can try flashing with another rom....
the chances of getting unsucessful flasing is pretty low and even if the flashing goes bad you can do doc format and reflash again.... but sure all your important files are in your sd card and do a back of your data.....
To go to your original rom you have to flash with original shipped rom.... i bet you'd wanna go back after tasting the great roms here.
Thx for your encouraging words. I'll have a go as soon as I found the right ROM. Maybe you can give me some advise here? I posted this question in the WM6 forum:
http://forum.xda-developers.com/showthread.php?t=427455&page=2
backup before upgrading
I accidentally posted this message first on the Wizard forum. Just found that out now, so I am eposting it here. Sorry for this...
I refer to my question about how to prepare your uni for a roll back in case this should be necessarry. Since nobody replied (and due to the fact that I am a control freak and hate the idea that I will loose control after a possible failed upgrade) I continued my search and found a recipy on how to back up the HTC Uni ROM. This procedure should create a "bootable SD" with a full restore with original bootloader, ROM, ExtRom, etc...
(http://buzzdev.net/viewtopic.php?f=40&t=33157 - How to upgrade your HTC Universal ROMs)
For those who are having start problems with mtty, this was also helpfull for me:
(from http://wiki.xda-developers.com/index...UCK_AT_STARTUP)
# Download mtty v1.42 from: http://www.megaupload.com/?d=ZN7XTZIE http://rapidshare.com/files/115791207/mtty.zip http://www.ziddu.com/download/3776805/mtty.zip.html
# Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe (alternative to this is to open ActiveSync press "File" and select "Connection Settings", in the newly opened window uncheck Allow USB connections)
# put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.(if you want detailed information about this step take a look here: http://wiki.xda-developers.com/index..._For_Beginners )
# Run mtty (from downloaded) Choose WCEUSBSH001 (If you only see COM 1 and COM 2, try unplugging the USB and replugging it, or difrend USB port)
I hope this link will help others . My question:
After I upgraded my 2 gb SD to a 16 SDHC i got a 2 Gb that I can use for storing my backup of my ROM. It contains all data that previously was stored from my Uni, like programs, pictures, etc. I put this card straight in my Uni "as-is". In the recipy quotes that we should use a 128 Mb SD. Will this work with a 2 Gb as well? reason I ask is because after I got mtty to work I got this message / error:
I typed : "task 32"
got this reply:
*****************************************
SD: Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD: Detected one card
SD: ready for transfer OK
d.total_lba=1EB000
d.block_size=200
d.RCA=4F4A
d.drv_type=40000000
d.busWidth=1
Total card size=3D600000
Read singal error D3
SD read fail!
Level = FF
**************************
Not sure if the error message would have inpact on my backup attempt, I typed at the usb prompt:
"d2s 70000000 80000" (this will backup your bootloader to SD/MMC)
got his reply:
******************************
Not allow operation!
******************************
So, question is if this error is a result of a SD that needs to be formated before using for backup media? If so, which format? fat 16, 32 or nfts? Or RAW format? (if RAW, how to do this?)
Hi,
is there a way back to Windows mobile after NAND installation of android. Need instuctions.
thanks,
t0nNe
tonne99 said:
Hi,
is there a way back to Windows mobile after NAND installation of android. Need instuctions.
thanks,
t0nNe
Click to expand...
Click to collapse
I think you've missed the sticky...
http://forum.xda-developers.com/showthread.php?t=680518
It also explains how to get back to WinMo.
Hi,
I think I followed all instructions to switch back to WiMo in the sticky thread.
For a second the display shows a screen with four colours:
KAIS130
SPL-3.28.0000
CPLD-8
Then the screen turns to grey showing:
Loading ...
but nothing else happens.
Data on my sdcard:
KAISDIAG.NBH form the sticky thread
KAISimg.nbh (renamed RUU_signed.nbh) form rom file from this thread:
forum.xda-developers.com/showthread.php?t=379554
Do I have the right files on my sdcard?
My phone: T-Mobile MDA Vario III
Any suggestions?
thanks,
t0nNe
Thats not a stock WM rom, I'd recommend looking for Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe
That is the last HTC stock rom, and should flash either from Bootloader using USB, or by extracting and renaming RUU_Signed.NBH and flashing by SD card.
Note that it is safest to Format the SD card before copying files and flashing, just to make sure that there are no other files or folders that could possibly confuse things.
Things to check, if using bootloader and USB, make sure you remove the SD card first. Before you enter bootloader unplug the usb cable too, now camera+power, the bootloader screen should display 'Serial' on the bottom white area, after this plug in the USB cable, it should now say 'USB', once this is showing run the file above and plunge you back into the hell that is WM
For SD card method, make certain that only the KAISimg.nbh file is on SD, and when you enter bootloader mode note that it may take a little while to read and check the NBH, since it is around 100MB, so be patient.
Hi zenity,
I deleted the KAISDIAG.NBH form my sdcard and took the renamed ruu_signed.nbh from mda-vario.exe from german t-mobile site.
Now it works fine.
Thank you for your support.
t0nNe
This happened to me last week. I wanted to check how WM used to look on the Kaiser, and I got into the same issue...
Man, WM on Kaiser looks terrible! Android is much faster and more usable than WM, even with the latest ROMs.
I'm not saying that WM is not a capable OS, it's just very hard to use on a small screen. On my HD2 at least, it runs quite fast to compensate for any aesthetic issues
tonne99 said:
Hi zenity,
I deleted the KAISDIAG.NBH form my sdcard and took the renamed ruu_signed.nbh from mda-vario.exe from german t-mobile site.
Now it works fine.
Thank you for your support.
t0nNe
Click to expand...
Click to collapse
Glad I could help, and it's a good thing to have that file if you ever decide that WM is not as much fun as Android, ( I give it a week maximum before you reflash ).
hello devs,
tonne99 said:
For a second the display shows a screen with four colours:
KAIS130
SPL-3.28.0000
CPLD-8
Then the screen turns to grey showing:
Loading ...
but nothing else happens.
Data on my sdcard:
KAISDIAG.NBH form the sticky thread
KAISimg.nbh (renamed RUU_signed.nbh) form rom file from this thread:
forum.xda-developers.com/showthread.php?t=379554
...
Click to expand...
Click to collapse
my KAISER is:
KAIS130
SPL-1.94.0000
CPLD-8
zenity said:
Thats not a stock WM rom, I'd recommend looking for Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe
Click to expand...
Click to collapse
where can i find a stock ROM? could you give me a link for Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe
tonne99 said:
Hi zenity,
I deleted the KAISDIAG.NBH form my sdcard and took the renamed ruu_signed.nbh from mda-vario.exe from german t-mobile site.
Now it works fine.
Thank you for your support.
t0nNe
Click to expand...
Click to collapse
or a link for mda-vario.exe
thank you very much...
zenity said:
... only the KAISimg.nbh file is on SD...
Click to expand...
Click to collapse
hımmm...
i think it's ok...
i'm waiting
i'm so excited
i want to donate to you zenity
but i don't know how to donating...