:? How can I obtain the XDA's SIM Phone Number ?
Cooperlegend said:
:? How can I obtain the XDA's SIM Phone Number ?
Click to expand...
Click to collapse
Goto Inbox, Tools, Options and Tap SMS.
call another mobile with the SIM inserted and see what number comes up?
If you have only one phone but 2 sims: send an SMS to the number of the other sim then swap sims and you should get "message from......"
Ben
You misunderstand me !
I did post this in the developers corner !?!?!
I meant how do I get the phone number from my XDA via code eVC into my program ?
Any ideas anyone ?
John
Although I havent tried it myself yet, the ExTapi function lineGetGeneralInfo should give you a structure with the subscribernumber.
Cheers!
/Christer
I haven't tried to do this on the XDA but have done something similar on other phones by using the AT+C command set. From memory if you send a AT+CNUM to the phone it should respond with the subscriber number.
Does anyone know how to do this on an XDA? I would guess you need to have the wireless modem facility and then connect via this.
Cheers, Malachi
Take a look at the tstril example at this site, modifying it you can send AT commands to the modem.
Could any body please send me the eVB code for obtaining the XDA's phone number.
:shock:
:lol:
Hello,
I have recently upgraded my JasJam from my cellular carrier's WM5 ROM to Schap's 4.20 WM6 Rom. Everything is good, however there's one annoying issue with the way that phone numbers are displayed in caller id.
The problem in Israel is that land lines have a two digit area code and cellular numbers have three digit area code. Is there a way to change the way that phone numbers are displayed in caller id? Basically, I would like to remove the parenthesis and the spaces and see the number in one string.
Thanks!
I have a similar problem. costa rica has 8 digit ph numbers with no area codes. so I get 3 digits in bracket followed by 3 more #'s - 2 numbers. very confusing. any help is greatly appreciated.
Thanks,
Joe
have you tried changing your regional settings?
XtreMe_G said:
have you tried changing your regional settings?
Click to expand...
Click to collapse
Yes I did. No luck.
Anyone else? I'm sure there's a ph format somewhere, registry edit maybe?
Joe
Hi,
Who knows, How to calculeted the 15-th digit of IMEI?
Thanks in advance!
not sure if it's accurate but wikipedia is your friend here. I was reading about it a week or two ago.
It's the first link in google
http://www.tele-servizi.com/janus/texts/imei.txt
or
try to digit *#06#
you would return an info screen with the imei (first 15 numbers is IMEI other 2 numbers is phone model)
ie 123456789012345(00) (00 is my phone model number)
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
How does the phone know more than the number of the caller if not in contacts???
I was thinking of the way my landline phone (yes, I still have one of those, but I may be canning it soon) gets its Caller ID information. Verizon just sends it down the line to the phone. I thought T-Mobile did the same thing, the service just sends the necessary info down the line to the phone, but I thought that was a given (Caller ID) with wireless phone service. Maybe I'm mistaken, which maybe someone could clarify for me?
Now to me, what I'm getting seems like "partial" Caller ID, the number without the name? Or maybe I'm just totally confused on it all, been a rough week...
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
I didn't mean Verizon's wireless service, I meant their landline service.
Never mind, went over to T-Mobile, that's the way it's sent down, number only. Thanks.
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
I thought I was having that Problem..
but im now having the problem with the Pictures not coming up.
tdavis75 said:
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
Click to expand...
Click to collapse
In Canada Rogers offers this service. They call it Name Display
^^^^^^^^^^^yup dont forget fido too lol
Hi all,
My watch touch screen is not working. How can I find Serial number?
I throw out away its box.
Is it possible to see my watch screen remotely in my phone? it will help me to find it in setting.
Or is it possible to send any command on ADB to find its Serial Number?
TNX.