Hey,
Sturggling with this now, so here asking for help.
Got a new P3600i here. For whatever reason, i CAN NOT run SSPL or any RUU updater. everytime it runs, it goes to reboot to the tri colour screen, but hangs on a black screen. I can't use any tools to unlock the phone, update, apply hard SPL etc.
Anyone have any other suggestions?
thanks
mxlaser said:
Hey,
Sturggling with this now, so here asking for help.
Got a new P3600i here. For whatever reason, i CAN NOT run SSPL or any RUU updater. everytime it runs, it goes to reboot to the tri colour screen, but hangs on a black screen. I can't use any tools to unlock the phone, update, apply hard SPL etc.
Anyone have any other suggestions?
thanks
Click to expand...
Click to collapse
for now, not, but you can describe the version of rom, and if it will be upgraded, it can possible to try to extract it and post!!
bye!
Well, thats the funny thing, its the exact same:
ROM: 3.00.707.18
Date: 07/24/07
Radio: 1.46.30.11
Protocol: 32.79.7020.19H
IPL: 1.00
SPL: 3.03.0000
Its exactly the same as latest WM6 official ANZ rom.
Any ideas??
That's why I wanted an extracted version of the P3600i ROM.
It can't be the same as the Dopod WM6 version for the P3600 (ordianary Trinity) because it's about 25MB bigger than the Dopod ANZ version. There must be something added to the P3600i ROM.
Can you try flashing to the Official Dopod ANZ WM6 version (ROM: 3.00.707.18) from the HTC website to see what happens?
Better still, if you know how extract the P3600i ROM so one of the many tech wiz's aroud here can have a look for you.
Anyone who knows how to extract the ROM plz can you post a step by step for those of use who don't know how.
capeli said:
That's why I wanted an extracted version of the P3600i ROM.
It can't be the same as the Dopod WM6 version for the P3600 (ordianary Trinity) because it's about 25MB bigger than the Dopod ANZ version. There must be something added to the P3600i ROM.
Can you try flashing to the Official Dopod ANZ WM6 version (ROM: 3.00.707.18) from the HTC website to see what happens?
Click to expand...
Click to collapse
Thats thew thing. I downloaded the offical ANZ WM6 update for the D810/P3600 and updated using that. Worked perfect, updated and no problems, exactly the same as was on there.
However, i then tried to "downgrade" to an official WM5 rom, but its stops at 1% then reboots phone??
So
WM6 Dopod ANZ ROM which takes up about 73MB on the P3600, will take up 96MB on the P3600i? WTF?
Perhaps it has something to do with extended ROM. I know that with the
P3600, you could not use the extended ROM after updating to the Dopod ANZ ROM...not sure if that's indicative of anything.
Are you flashing with an SD card still in the device? If so try flashing with SD card removed.
mxlaser said:
Thats thew thing. I downloaded the offical ANZ WM6 update for the D810/P3600 and updated using that. Worked perfect, updated and no problems, exactly the same as was on there.
However, i then tried to "downgrade" to an official WM5 rom, but its stops at 1% then reboots phone??
Click to expand...
Click to collapse
What was your free storage after flashing?
capeli said:
What was your free storage after flashing?
Click to expand...
Click to collapse
Free storage was 174mb. So i've gained 14 mb from somewhere.
Trying to update now using an official HTC branded rom, as opposed to the Dopod braded WM5 roms, and that still doesnt do it either
mxlaser said:
Free storage was 174mb. So i've gained 14 mb from somewhere.
Trying to update now using an official HTC branded rom, as opposed to the Dopod braded WM5 roms, and that still doesnt do it either
Click to expand...
Click to collapse
So there is a difference between the ROM that came with the P3600i (Giving 160MB free storage) & Official WM6 Dopod ANZ ROM (Giving 174MB Free Storage).
If it's any help, when I buy my P3600i, I'll be sure to extract the Original ROM BEFORE I flash it. It might help someone figure out your flashing issue.
Thing is I don't know how to extract ROMs. Can anyone help?
capeli said:
So there is a difference between the ROM that came with the P3600i (Giving 160MB free storage) & Official WM6 Dopod ANZ ROM (Giving 174MB Free Storage).
If it's any help, when I buy my P3600i, I'll be sure to extract the Original ROM BEFORE I flash it. It might help someone figure out your flashing issue.
Thing is I don't know how to extract ROMs. Can anyone help?
Click to expand...
Click to collapse
MMM, theres seomthing (buggered if i know what) in the EXT rom that adds that 14mb. I didnt run the extended rom, and i saved 14mb. If i let it run fully, it ends up with 160mb free.
Also, no WM5 HTC or dopod rom works. They all state that the update file is corrupted and reboots at 1%.
I called HTC, and said i "had to have WM5" due to software and in the infinate helpfulness told me to buy a Dopod D810 then. Theres no WM5 available for the HTC p3600i.
I think theres something in the SPL/IPL thats stopping any SSPL bootloaders being pushed onto the device, which then stops flashing anything else...
Hopefully someone will figure it out.
mxlaser said:
MMM, theres seomthing (buggered if i know what) in the EXT rom that adds that 14mb. I didnt run the extended rom, and i saved 14mb. If i let it run fully, it ends up with 160mb free.
Also, no WM5 HTC or dopod rom works. They all state that the update file is corrupted and reboots at 1%.
I called HTC, and said i "had to have WM5" due to software and in the infinate helpfulness told me to buy a Dopod D810 then. Theres no WM5 available for the HTC p3600i.
I think theres something in the SPL/IPL thats stopping any SSPL bootloaders being pushed onto the device, which then stops flashing anything else...
Hopefully someone will figure it out.
Click to expand...
Click to collapse
Why don't you use the registry tweak to show the extended ROM to see what's in there?
Doesn't the extended ROM automatically run itself? How did you stop it?
capeli said:
Why don't you use the registry tweak to show the extended ROM to see what's in there?
Doesn't the extended ROM automatically run itself? How did you stop it?
Click to expand...
Click to collapse
If you reset before the ext rom runs, it doesnt run on reboot. I don't care for all the customised crap half the time and choose to install what i need.
Well, i'll settle for the fact i'll have to manually install each app/tweak etc until a time i can update the phone.
I will say though, that having used the D810 for the last 5 months, everyday, this one seems a LOT faster (even using the official rom as well). the extra 100mhz seems to of made a big difference. now to see how it effects battery life.
OK, honestly would love some help from anyone that can :s
Tried all the following things now:
Using MTTY
Using SPL Exploit (finds overflow, says is done, SPL remains the same.)
Using DES SPPL
Running SSPL on device seperatly
And flashing various official WM5 roms in the hope it downgrades IPL/SPL.
All have resulted int he same outcome.... NOTHING!
I'm guessing this is HTC's new method of preventing flashing roms, and is likely to obviously be on other roms in the future. Was hopiung someone (Oli, pof, Des etc) may have a solution or would like more info form me to find one??
No progress?
Nope
None.
Beyond my technical skills now, so its up to the gods of modding (Oli, Des, POF etc) or its never getting flashed.
Mind you, seems to be stable as at the moment using the official rom, so not too worried.
i wonder if this has something to do with the new ipl? maybe ipl 1.00 plus whatever is hidden in the 3600i rom or extrom or whatever makes it not able to flash unofficial roms.. Cause there's nothing else really different than p3600's that we know about.. and some people (inlcuding me) have ipl 1.0 from the official ROM upgrade.. so maybe there's something else in there that works with it to block the upgrade process..
Well, its not in the EXT rom, and it probably can't be in the normal rom as its the exact same (meaning i downloaded and flashed) the ANZ WM6 official rom. Only thing possible i can think of is possibility its a hardware revision stopping it, but it won't let you even run SSPL software either.
Everything i do, SPL Exploit, DES SSPL, RUU Updater, Hard SPL et all ALL result in it "almost" going to the modified boot screen but ending up with a black screen. You then need to soft reset which leaves you at the previous bootloader...
Sucks. And is annoying as all hell. One saving grace is the extra CPU speed makes a big difference, and the extra storage means having to install all the apps that get cooked into the roms is that big a deal as theres plenty of room left over.
That said, i can't even update to that latest radio rom, which is what sucks the most.
mxlaser said:
Hey,
Sturggling with this now, so here asking for help.
Got a new P3600i here. For whatever reason, i CAN NOT run SSPL or any RUU updater. everytime it runs, it goes to reboot to the tri colour screen, but hangs on a black screen. I can't use any tools to unlock the phone, update, apply hard SPL etc.
Anyone have any other suggestions?
thanks
Click to expand...
Click to collapse
Did you try to disassemble a ROM from nbh to nb, and reassemble it with the new offsets we can see in Dopod WM6 ROMs ?
The P3600i has 256MB NAND in oposite of the 128 Mb NAND of the regular P3600.
To flash this device you need bootloader 3.x or higher, and OS rom must be tagged 0x401 in the NBH (not 0x400, which is used for 128Mb NAND), also you should use a new RUU (the on the official WM6 rom should be ok).
Hope it's clear, if not PM me as I'm not following this thread.
Related
can't seem to get this upgrade to work. the updater stops at about 28 percent for me with an error (286? i think) and after that i'm stuck in bootloader. Every time after that, the updater wont even start.. (a different error).
i can flash successfully a cooked ROM, but can't get the official one to work. Could it be a conflict with Des' crash-proof SPL? That's the only thing i can think of at this point..
To me said invalid device id, and got stuck on the boot loader
try back to any old offical ROM
and then copy SSPL to PDA and run it on PDA
when bootloader appear, run WM6 offical updater
I got same problem too and get fix
good luck
update: since i managed to flash PDAVIET's rom, i thought i'd just try going back to Olipro's hard-spl and see what happens.. So i flashed it, entered bootloader and ran the WM6 update again, and SUCCESS!!
very strange though.. anyone have some thoughts as to why it wouldn't work under Des', or if this is just coincidence?
It installs a new bootloader that can't be hacked by the previous hacks I think.... I'm stuck in it too...
SPL-3.03.0000
racerx_ said:
update: since i managed to flash PDAVIET's rom, i thought i'd just try going back to Olipro's hard-spl and see what happens.. So i flashed it, entered bootloader and ran the WM6 update again, and SUCCESS!!
very strange though.. anyone have some thoughts as to why it wouldn't work under Des', or if this is just coincidence?
Click to expand...
Click to collapse
Hi racerx,
I've encountered the same problem as your, stuck at 28% ERROR [286] while flashing, and couldn't go over it even after recovery process following the instruction.
Could you please explain a bit more details about how to go back to Olipro's hard-spl and enter into bootloader?
Thanks, eager to flash the new ROM...
Well I was able to get out of it by running Pof's CID RUU Unlocker, however, it errors after 7%, and resets. It gets past the bootloader, however, it hardreset the phone...eh.
IT happened to me too - Update Error.
So should i go back to Official WM5 then update to WM6 (i had AX3L installed before and i just had to reflash back to AX3L coz of the error from WM6).
Kinda scared me.....LoL
well, to start with i had Des' Crash-Proof SPL on my phone... so after the updater hung at 28%, i remained in Des' bootloader. I then ran the RUU for pdaviet's ROM, which flashed successfully. After that was on and my trinity was up and running, i flashed Olipro's hard-spl. Then manually put it in bootloader again, and flashed the official ROM.
Let me say this, though. At this point, i think you should be content to get your device out of bootloader mode. This Dopod WM6 doesn't have so much to be desired in it compared to cooked ROM's on this forum, plus your bootloader will be stuck at version 3.xxxx which i don't know if anyone is sure how to deal with yet. I'm regretting flashing mine to official version. Should have waited for a chef to pack it up for me.
what does your bootloader say?
You need to actually have a device that this release is supported by. It flashes a new SPL but you can flash Olipros HARD SPL 1.20 straight over that once WM6 has flashed.
It replaces any HARD SPL before flashing, probably to ensure only official devices get this update. Those having issues are probably out of this.
The official rom is fine, not as finished or customised as some chef ones, but good none the less. Also, the new 3.0??? SPL is no issue at all and easily removed once flashed.
yeah saw your post on the other thread.. thanks for the tip! talk about a stressful morning haha..
i was waiting for this ROM cause my activesync has mysteriously stopped working for a couple of weeks. so i was going to flash and take it to the service center. The miracle of it, was after my device hung and i reflashed pdaviet's rom, my activesync mysteriously works now even though i reflashed a million times before trying to get it going haha..
new spl is needed for flashing new radio rom with cid locked device.
So that's why RUU reflashes SPL at first.
U could simply reflash HArd spl back by using sspl
mUn, when can we expect your much anticipated "Indigo" rom using this offical WM6 base??
Genius! thanks for the tip mun...
all i can say is one word....
INDIGOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!
I also got Invalid vendor ID when I tried to flash for the first time. But it flashed just fine after I put it into bootloader mode. Give it a try..
Flashed my mine in a breeze from LSVW version 27/05/07.
myppcsg said:
Flashed my mine in a breeze from LSVW version 27/05/07.
Click to expand...
Click to collapse
still same problem
can you post the RUU files plz
mxlaser said:
You need to actually have a device that this release is supported by. It flashes a new SPL but you can flash Olipros HARD SPL 1.20 straight over that once WM6 has flashed.
It replaces any HARD SPL before flashing, probably to ensure only official devices get this update. Those having issues are probably out of this.
The official rom is fine, not as finished or customised as some chef ones, but good none the less. Also, the new 3.0??? SPL is no issue at all and easily removed once flashed.
Click to expand...
Click to collapse
Thanks for all the helps from you guys. This is what I did after stuck at 28% with ERROR[286]:
1. Flash back to Official OZ WM5 ROM. Had no problem to flash back as it was in the bootload mode.
2. Flash Olipro's Hard-spl. No problem as well.
3. Flash Official OZ WM6 ROM again...... and stuck at 28% again!!!!!! with ERROR [262] @#[email protected]#$.
4. Now in the process flash back to Official WM5 again... @#@#@....
5. Will flash Official WM6 straightaway after that.
6. Will update result later....
geoffreyhan said:
Thanks for all the helps from you guys. This is what I did after stuck at 28% with ERROR[286]:
1. Flash back to Official OZ WM5 ROM. Had no problem to flash back as it was in the bootload mode.
2. Flash Olipro's Hard-spl. No problem as well.
3. Flash Official OZ WM6 ROM again...... and stuck at 28% again!!!!!! with ERROR [262] @#[email protected]#$.
4. Now in the process flash back to Official WM5 again... @#@#@....
5. Will flash Official WM6 straightaway after that.
6. Will update result later....
Click to expand...
Click to collapse
hehe i did that many time this day maybe hmmm 5 or 6 and im still doing that
try to use another version of RUU (the older one)
ps. plz don't post messages about indigo in other tgreads ) if u want to ask - so ask in mine thread.
I'll flash official rom today and then will make some conclusion ) but i thibk that indigo will be based on oficial release
A lot of us are experiencing a misterious error ("communication problem") while trying to update HTC Trinity with an official WM6 ROM update (one of those released out of Europe) using Hard SPL as a way to bypass CID checking.
Anybody has found a workaround?
I dont see how a communication error can occur while an official ROM mounts correctly - I tend to think that HTC has added some extra checking of the installed SPL version and comes out with a deliberately confusing error message.
Help is needed!
Thanks to you all.
My Trinity has italian ROM and I mount HardSPL 1.3 for bypassing CID control (SoftSPL or HardSPL 1.2 simply dont work as the HTC update procedure simply reinstalls the original SPL).
are you running Vista? If so that causes communication errors.
No, I use XP. And as I said the problem doesnt show up with the original WM5 ROM version, only with the latest WM6 ROM.
have you tried using the modified RUU of the official update?
No and I dont know what kind of modification do you mean!
I am not so much willing to install cooked ROMs unless I know what is in there.
Still waiting somebody to understand the nature of this "communication error" and how to overcome it ....
is there a number code by the error?
basically, the official ROMs gave a lot of people trouble to install.. something to do with the new RUU and hard-spl or something... so people took the nbh file out of the new installer, and put it in the old installer (no ipl, spl, etc) and it seems to work like a charm. It's not cooked.. still official..
i was thinking it might fit your needs, since you weren't wanting your hard-spl to be overwritten by new bootloader anyway...
Thanks, I will try to do as you suggest as soon as I have time to do it!
Concerning the error code I dont remember, I will note it next time ... anyhow it is a strange message, I dont see how a communication error can occur in that situation (some people suggests it is a comm problem PC<-->Trinity, I dont see how it could happen only with the new RUU).
About modified bootloaders, SoftSPL and HardSPL 1.2 do not work (the RUU install just wipes them away); HardSPL 1.3 stays there - not sure his presence is part of the "error" (as the HTC guys could easily detect its presence in their update routine).
Finally I dont understand why HTC is not giving away Trinity WM6 to all customers worldwide - again I dont belive there are "radio" differences between Asia/Australia and the rest of the world - it must be some marketing decision against the interest of customers (the may even wait to have it in all european languages - but why not in english at the beginning?).
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
paulmurphy777 said:
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
Click to expand...
Click to collapse
...unfortunately no ideas, just the same problem described here already: http://forum.xda-developers.com/showthread.php?p=2927161#post2927161
paulmurphy777 said:
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
Click to expand...
Click to collapse
I have the exact same issue... I tired updating it from 1.24 to 1.93 and it restarted like it updated it. But when I go into boot loader its still got the old hardspl.
Does anyone know why??
I have tried searching around for a solution but no luck
I'm no noob and i've flashed 100's of times across many fones and unbricked a few with some careful reading but this seems very odd and stupidly simple. No idea what i'm missing.... only thing i can think to try is to flash from internal storage, but i would think this unwise with the hardspl as I thought hardspl would control access to the internal storage like some sort of bios perhaps?!
Same here
Hey guys,
Does anyone knows what is the resolution for this? I having the same problem as well.
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
gladiac said:
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
Click to expand...
Click to collapse
i have almost same problem but the only difference that my Diamond don't have hardspl on it and whenever i try to flash any hardspl phone stops at 0% and stays there for a long time....I want to change my Diamonds language...So can anyone suggest me solution.....I have already posted here on forum but no answer yet!
http://forum.xda-developers.com/showthread.php?t=749664
Another little question that how i can flash hardspl via internal storage and where its root???Root is the device path which we seen as drive in computer when we use mass storage or any other?
gladiac said:
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
Click to expand...
Click to collapse
Thank you. used this and it worked
Hi everybody,
got yesterday another diamond, after mine died some time ago. It has 193 spl and I cannot upgrade to olinex spl. It runs through everything, but upon reboot it still has the original 193 spl. Any ideas? I really need to flash, mine speaks Dutch and I want it in English. Please help. Kind regards. Ben
Hello,
i have a big problem.
After the installation of some Roms i have to do a hard reset becaue my Diamond chrashes.
So now I installed another Rom and the "Preparing your device for first use" screen appears but after this, nothing appens.
So i don't have any idea what i can do to fix this Problem...
Did anyone of you can help me please?
A little more inforation from you.
Might help to mention which rom you are having the issue with, which Radio version etc.
Radio ist 1.09.25.23 and the Rom ist Udks new Topaz R2.
I have the same experience with udK Syrius Topaz R0. The device keeps hardresetting even after I have installed another rom. Eventually, I restored to stock rom and install another cooked rom again. The problem seems to have been solved.
There are other users having the same problem with this rom. Although some have reported no problem, I would keep watching before installing this rom again.
ichselbst said:
Hello,
i have a big problem.
After the installation of some Roms i have to do a hard reset becaue my Diamond chrashes.
So now I installed another Rom and the "Preparing your device for first use" screen appears but after this, nothing appens.
So i don't have any idea what i can do to fix this Problem...
Did anyone of you can help me please?
Click to expand...
Click to collapse
How long are you waiting on this screen. It does take a few minutes for it to finish what it's doing.
Oh i wait about half an hour...
Now I changed the Rom and flashes Aztor and all is working.
Is it possible that the version of HardSPL is the reason for the hang up with udk's Rom?
At the moment i use hard-SPL 1.4, but I don't know how i can install the 1.93 Version.
When I download the zip.package from this tread http://forum.xda-developers.com/showthread.php?t=400950 the package contains only the RUU_Signed.nbh file and I have no idea how to install this file?!
ichselbst said:
Oh i wait about half an hour...
Now I changed the Rom and flashes Aztor and all is working.
Is it possible that the version of HardSPL is the reason for the hang up with udk's Rom?
At the moment i use hard-SPL 1.4, but I don't know how i can install the 1.93 Version.
When I download the zip.package from this tread http://forum.xda-developers.com/showthread.php?t=400950 the package contains only the RUU_Signed.nbh file and I have no idea how to install this file?!
Click to expand...
Click to collapse
You need the custom RUU to flash the spl to your phone
Im sorry, it is maybe a bad question, but where can I find the Costum RUU?
Thanks for your help!
Prewien said:
You need the custom RUU to flash the spl to your phone
Click to expand...
Click to collapse
Custom RUU does not seem to work with olipro's SPL 1.93. Try this one HERE which I know works.
ichselbst all you need to do is unpack this and run the ROM Update utility (RUU) follow insructions and wait till screen staes finished.
Hope that helps
So as you can figure out from the thread title I have a problem flashing my htc diamond.
I have installed a HardSPL version 1.30 OliNex, I can confirm that becouse on the three color screen there is a text saying "1.30 OliNex".
I still have the original ROM that comes with the phone when I bought it, so this meant to be my first flashing.
I want to flash the phone with this rom http://forum.xda-developers.com/showthread.php?t=593678 it is a WM 6.5 based ROM.
Because in the ROM package there wasn't a ROMUpdateUtility.exe I used it from other ROM package.
Connected via ActiveSync and followed the wizard. The phone reset and there came a gray screen with a progress bar. Now both progress bars on the phone and on the PC screen remain 0% and after a wile RUU finished with 262 ERROR Connection error, see the attached picture.
After that I tried to flash it from Internal Storage. A followed the steps according the procedure, and after the three colored screen it came the gray screen with "Loading..." message. I waited for almost 30 minutes and nothing happened.
What seems to be the problem?
I assumed about firewall disabling the connection. But I turned off the firewall and again the same story.
Then somewhere I found that there is incompatibility with the RUU and HardSPL version, but tried to flash with the same RUU that I used when I was installing HardSPL.
Then I tough that the problem is about flashing unsigned ROM on a signed HSPL, but it is not that the ROM is signed.
I am afraid to use MTTY so I don't brick my phone, because this is my first time flashing a Diamond.
I'm confused What seems to be the problem?
Any help can be welcomed.
Could this be indication of a hardware problem? When waiting for the "Loading..." message disappear the back cover warms a little.
Thanks.
1. Did you use the RUU from my thread?
2. NEVER USE AN H-SPL RUU TO FLASH ANYTHING OTHER THAN H-SPL!
3. is this a CMDA phone. IE, what network are you on?
Well no I didn't use the RUU from your thread, I've used a RUU from other ROM package.
This is not a CDMA phone I'm on T-Mobile Macedonia network. And the phone looks like this
On other Macedonian forum they told me it is a hardware problem. Can this be true?
So what do you think about my problem?
Well no I didn't use the RUU from your thread, I've used a RUU from other ROM package.
This is not a CDMA phone I'm on T-Mobile Macedonia network. And the phone looks like this
On other Macedonian forum they told me it is a hardware problem. Can this be true?
So what do you think about my problem?
EDIT: I did tried the RUU you recommended in your thread but it's the same.
I think it is in the PDA.
Configure active sync, and uncheck "allow usb connection" and try again.
For updating from internal storage you must have to copy the rom to the root of internal storage with a special name, ""diamimg.nbh"
Hmmm..
What he said... and...
Should have used one of the earlier SPLs. you only need to use the latest one if you are having problems with the older versions. I have the same diamond and used an early SPL.
Upgrade the radio rom first and go with a rom that's version 6.1 not 6.5 as most 6.5 roms now pack the Sense application.. (IMO Non-Sense, Senseless (Not enought ram or responsiveness))
Old roms here
http://forum.xda-developers.com/showthread.php?t=470757
Give olinex some cash for his Diamond Unlocker as this is the surefire way to fix it.
johnyboy_ said:
Configure active sync, and uncheck "allow usb connection" and try again.
For updating from internal storage you must have to copy the rom to the root of internal storage with a special name, ""diamimg.nbh"
Click to expand...
Click to collapse
The connection between PC and PDA is made, because as I said there is a progress bar on the phone screen too.
djfuego said:
What he said... and...
Should have used one of the earlier SPLs. you only need to use the latest one if you are having problems with the older versions. I have the same diamond and used an early SPL.
Upgrade the radio rom first and go with a rom that's version 6.1 not 6.5 as most 6.5 roms now pack the Sense application.. (IMO Non-Sense, Senseless (Not enought ram or responsiveness))
Old roms here
http://forum.xda-developers.com/showthread.php?t=470757
Give olinex some cash for his Diamond Unlocker as this is the surefire way to fix it.
Click to expand...
Click to collapse
As I understand you, you are saying to install later version of Hard SPL right?
So to install a new version of Hard SPL I just need to do the same procedure as the first time, or I have to uninstall the previous one?
And please help me which version of Hard SPL is safest to install? I'm afraid of the developer versions or maybe they aren't so scary
Are you a 100% positive it is the HardSPL?
djandreski said:
And please help me which version of Hard SPL is safest to install? I'm afraid of the developer versions or maybe they aren't so scary
Are you a 100% positive it is the HardSPL?
Click to expand...
Click to collapse
Presuming from your post, you are using a signed Olinex SPL, i doubt that the rom has been signed be OliNex, the only difference with Dev is you can flash any Rom, flash the Dev one from my thread, nothing to be afraid of
Good Luck
Badwolve1
What are the steps of installing new SPL?
Do I just need to do the same procedure as the first time, or I have to uninstall the previous one(somehow)?
UPDATE: I did it, I successfully flashed my Diamond PDA! It seams that the problem was in the SPL I installed 1.40 OliNex Unsigned and it flashed like a charm. Thanks guys for the help. Now this thread can be closed, or do I have to close it myself.
Great!
Glad it all worked out