Int Explorer Connections - P3600 ROM Development

Help Please
Brand new trinity and first time I used zap onto internet via wifi.
Since then never been able to access again. Wifi, GPRS all no go. Msg "cannot connect with current settings" I have checked and had works IT check all settings fine.
Is there a bug? or can does anyone know where I can download Internet Explorer for W6 and see if that is problem?
Regards

I too have suffered this problem. The way I have fixed it is to go through the settings not changing anything and save them. It doesn't happen often but this seems to fix my problem. Doesn't bother me too much as it only takes about 20 seconds to got through the settings and save them.
Hope this helps. If not try flashing with a different ROM.

Related

GPRS not connecting??

I have done multiple searches and have not found anything. WIFI works, but gprs will not connect, i've tried disabling proxy and everything. I am currently using schaps 3.60a and the error i get is the answering modem has disconnected to check your connection settings click setting tab. I have not seen this error before. I've flashed multiple 8525's before. I have one working perfectly fine, and this is a second one i followed the exact same steps but gprs will not work no matter what.
I'm suddenly having an identical or almost identical problem on VP3g's ROM. My Wifi connection with PIE works fine and I'm getting push e-mail delivered. But when I try to connect off WiFi as I had always done before, I get the message:
"Cannot connect with the current connection settings. To change your connection settings, tap Settings"
I've checked my settings and they seem correct and the same I always used. I've checked to see that my NoData settings were not inadvertently set wrong, but Media Net is Enabled. I've tried flushing temp files and cookies. I even tried erasing them and then reestablishing them by going online with WiFi. Finally I also tried using Opera.
Nothing works. This is maddening
The only thing strange or different is that I had set HTC Custom for temp files to be on my SD Card and when I now tried to set them on main memory (to see if somehow that might work) I get a series of error messages each time and files remain on SD.
Is it possible for the radio for gprs to be corrupt?? Or it could it be something simple as a registry edit? On the phone it is instantaneous when you try to connect to gprs it kicks back that message right away. So i know for sure gprs/edge is inop. Not sure why though.
Check with your operator
It happens to me once in a while even when the "E" shows up in the display indicating Edge abailability, but reality is that the network is down or highly congested.
chhuong I think you are right and it must be a corrupt registry entry. I know that the visible settings are correct.
It occurred to me that I have been using NODATA to turn off GPRS reception whenever I wanted to use Wifi and perhaps one of the times I set it to be disabled and then enabled it again, it must have been left as disabled even though it "says" that it has been re-enabled. Also I had a problem trying to change the cache from Main to SD, and would keep on getting errors whenever I did, using HTCustom. So probably at some point some registry corruption must have crept in. Unfortunately I've become too lazy to open the registry editor and dive in to find out where it might be.
Anyway, I finally got tired of it not working and used the problem as an excuse to move from VPG's 3.60.1 to 3.60.2. I reflashed this morning and it's been fine ever since. This time I won't use NODATA.
well actually i've tried flashing multiple roms and multiple radios, and nothing, still no gprs? So mine might be an internal fault?? Has anyone ever heard of that happening??
have you tried: start - settings - connections -connections - advanced - select networks - Media Net? Reverse it back to my network when you to use WIFI.
I've got similar problem after reflashing. Try to run Shap's Advanced configuration tool, select Connections tab and click Enable HSDPA. Don't ask me why, but it helped me to solve the problem, even there is no HSDPA available here...
I am having the same problem but i dont think its schaps rom, i think it happened either after i installed the 1.54.10 radio or after i installed the shogun cabs. If a moderator or senior could point us in the right directions, it would be much appreciated.
Rastislavko said:
I've got similar problem after reflashing. Try to run Shap's Advanced configuration tool, select Connections tab and click Enable HSDPA. Don't ask me why, but it helped me to solve the problem, even there is no HSDPA available here...
Click to expand...
Click to collapse
I tired that many times, but it didnt help, thanks anyways.
FWIW, I was able to clear this up the last time it occurred by going in to Menu > Tools > Options > Memory and clearing the History, deleting files and clearing cookies, then soft reset, and everything was okay.
Try this cab http://forum.xda-developers.com/attachment.php?attachmentid=54309&d=1192447925, and if it doesnt work try enabling hspda, and if that doesnt work, try calling your provider and ask them to make sure that your account is enabled for data. I tried all that, then, because i dont have a data plan, but i use pay per usage, i went to ATT's site and added a data plan. Now it works, so i think its disabled on ATT's side. GOOD LUCK FELLOW HACKERS

IE just won't connect...

Hi there, first post from me.
Great forum here found it really helpful over the last few weeks.
I've become a little stuck with my connections recently. I managed to flash my phone with the WM6 upgrade when I first got it and all was good, 4GB Micro Card, TomTom 6 all working with GPS etc. However, I tried to upload some corrupted maps for TomTOm and had to Hard reset my phone.
Now, since this I've had grief with my connections. I've finally managed to get these working again and I can connect to Windows Live and download my hotmail with both WiFi and GPRS connections. However, Internet Explorer just won't work. I've tried forcing it to use WiFi with the phone shut off, doesn't work. Tried it with GPRS with WiFi off, doesn't work either.
When I try to browse to an address it just pops up "Cannot Connect with current connection settings" I've tried all sorts now and I just cannot get it to work. I have "this network connects to the internet" checked in Proxy settings.
The only thing I have noticed is I have a load of connections under Internet Sharing which are no longer current yet they are still there.
Any help gratefully received!
You could just make a backup of everything and hard reset. I know thats a bit harsh, but it always works. I usually don't resort to that as a first, but give it a try.. just make sure everything is backed up to ur storage card and synced w activesync/wmdc. any questions, dont hesitiate to pm me
-Nstefanelli-
Cheers, just done that now and checked PIE worked fine before doing anything else.
All groovy now. Very odd it did what it did.
nstefanelli said:
You could just make a backup of everything and hard reset. I know thats a bit harsh, but it always works. I usually don't resort to that as a first, but give it a try.. just make sure everything is backed up to ur storage card and synced w activesync/wmdc. any questions, dont hesitiate to pm me
-Nstefanelli-
Click to expand...
Click to collapse
Yeah, with ATT/Cingular here and after a month or so I can no longer connect to much. I either install a new rom or do a hard reset and all works after. I don't know why it craps out for a bit then works good on a re-install. Once my device is set up I don't change much on it. strange, but not that big of a deal as I flash the new releases rather frequently.

Opera crashes and Internet connection probs with TP2

Hi all,
I am loving my TP2 but have a couple of annoying issues. anyone else experiencing the same...?
Firstly Opera keeps crashing. Tends to happen when trying to log in to a site. www.facebook.com mobile site is fine but crashes if I try to log in to the full site. I downloaded Opera 9.7beta and it does the same on that one too.
Also my internet connection keeps dropping. If downloading emails it might download the headers then lose the connection. Sometimes pressing send/receive gets it back online but othertimes it wont connect again until I go in to comm manager and turn the phone radio off then back on.
Frustrating problems that I didn't expect from a brand new device.
Never tried logging into the full site. I tried it right now but it I can't even input my username. So I gave up. Using the mobile site is just as good. I don't think it can handle the full site anyway.
I have never lost my connection in a good reception area. It could be your area or your carrier that has a weak reception. Try in a different area or try the phone using another network or carrier. Ask a friend to help you that uses a different network.
Make sure they are ok with you using data tho.
I had the same problem when logging on full Facebook site on my old Kaiser with Opera 9b1, it was crashing.
But on my TP2 using the included Opera, its working quite good without crashing.
Maybe you installed another sofware that uses all the memory ? just a random guess.
Looks like the HTC built in T-Mobile settings could be the cause.
The built in settings have a Proxy Server setting that I couldnt remove so I set up a new connection using:
general.t-mobile.uk
user
pass
And did not set up a static IP address. It seems to be stabler in the 20 mins I have used it and I can now log in using the WM Facebook program as previously it would not let me log in.
Hope that helps someone.
I'm back again for some help!
I have managed to get Facebook working and Opera no longer crashes using the new data settings I entered but I am still losing my data connection.
When I lose it I get the "Cannnot connect for an unknown reason" pop up box. If I clear it I can occassionally get the connection to then activate but usually I am having to cycle the phone radio within Comm Manager before it will go online. This is really annoying as if the box comes up it won't check for email till I OK the message and get the data connection working again.
I am using a T-Mob sim that worked fine in my Tytn II and checked all settings but all seems ok.
Could it be a faulty radio that keeps kicking me offline? Calls seem ok. I have dropped a few but have also had 30 min + calls so seems to be specific to data.
aerotec said:
Hi all,
I am loving my TP2 but have a couple of annoying issues. anyone else experiencing the same...?
Firstly Opera keeps crashing. Tends to happen when trying to log in to a site. www.facebook.com mobile site is fine but crashes if I try to log in to the full site. I downloaded Opera 9.7beta and it does the same on that one too.
Also my internet connection keeps dropping. If downloading emails it might download the headers then lose the connection. Sometimes pressing send/receive gets it back online but othertimes it wont connect again until I go in to comm manager and turn the phone radio off then back on.
Frustrating problems that I didn't expect from a brand new device.
Click to expand...
Click to collapse
I had the same problem when i first got mine had to do 2 hard resets before it went away, after it returned again i just started using the energy rom and never looked back
Opera 9.7 beta
I tried installing the new Opera beta on the unlocked/unbranded Touch Pro 2 it either doesn't start getting stuck at the splash screen or it starts and then crashes after a click or two. I am unable to use it at all. Anyone else experiencing this problem?

AT&T MEdia Net Issues

I was having issues with my MEdia Net on AT&T. Every so often I would get the message that "The remote party has ended this connection" and when I would try to edit the MEdia Net settings to make sure they were good I would see "The connection is pre-configured. It cannot be modified."
It turns out that settings \\HKLM\Comm\ConnMgr\Destinations\MEdia Net\ReadOnly to 0 allows editing of the connection and then removing the username and password that are specified for the MEdia Net connection makes the connection more stable.
I wanted to put the solution I found in one concise place as I had to dig around quite a bit to find this answer.
In case you want to add back in the username and password for some reason they are [email protected] and CINGULAR1. See http://208.74.204.154/t5/forums/for...age-id/53168/print-single-message/true/page/1 for more information.
I have also included a CAB that will turn off the read only setting for MEdia Net in case you won't want to have to mess with the registry. I hope this helps someone.
UPDATE: I also found that my settings kept setting to ims.cingular randomly for an unknown reason, which of course breaks my connection. I could reset my phone to get it back to wap.cingular, but that is a pain. I therefore deleted all the other connections on my phone using the Connections applet in Settings. Under the Advanced tab you can choose Select Networks, then Edit every network in the list except for MEdia Net and delete it from the General tab. Then just make sure that both the Internet and Private Network settings are set to MEdia Net and you should be good.
UPDATE 2: The problem of my settings reverting back to ims.cingular continues to happen randomly. I searched my registry for any instances of ims.cingular and found one at HCLM\Software\HTC\SUPL AGPS\APN which I changed to wap.cingular and updated the CAB file below to make that change as well.
UPDATE 3: The problem continued. When seems to have fixed it for good was to delete the MEdia Net settings and then to add the settings to My ISP. The only thing that needs to be set is an access point name of wap.cingular. There is no username and password. That change has worked for over a week for me now. You'll still need the cab below to unlock MEdia Net so you can delete it.
UPDATE 4: The problem still came back. The latest thing I tried was to change the name of the connection to Cingular instead of the standard MEdia Net. That seems to have worked for a few weeks now. I also made the same change to my wife's phone and that seems to be better as well. The attached CAB will make the connection editable and then you can rename it on your own.
THANKYOU!
You saved my butt on this one. I was helping an end user of ours on a HTC Tilt 2. The AT&T Tech's insisted that troubleshooting this problem was going through and clearing out the cookies,cache, and history inside the Opera Browser.
What a total crock of .... I kept explaining to her that it's the DATA CONNECTION not THE FRIGGIN INTERNET BROWSER.
Anyways, simply running the attached cab to allow me to edit the media net settings let me correct the ims.cingular setting which solved the entire problem right away.
After clearing those 3 settings in Opera both techs insisted that to fix it I had to do a hard reset. I was furious. I knew they were taking the easy way out of it and I wasn't about to tell this guy that is billed out at over $300 an hour that AT&T was too lazy to properly fix the problem so we just had to reset the entire phone and all your stuff is lost.

[Q] Notifications wont show when screen off - B510

Hi everyone
I just updated to KitKat B510, NEEurope version. The problem is, that whatever I receive, a whatapp message, an email, the notification wont pop-up (no sound, no nothing), until I unlock the phone.
I don't think it's a WiFi problem (or it might be, it is set to "always keep WiFi on"), because when I unlock the phone, the network is ok, everything is connected.
Please, an advice?
Had the same problem occuring sometimes. Mine had a log of lost network. I dont know if there is a fix. Try factory reset and if that wont help flash b510 again. If its still present, revert to b132.
Thank you. I didn't see the network to drop, I think there is a problem with the sleeping setting.
I made some changes, I changed the profile to normal battery consumption, not smart or ultra battery.
The second was to uncheck WiFi optimization, in settings wifi-> options-> advanced.
Let's see how it goes from now on.
danny_zupa said:
Thank you. I didn't see the network to drop, I think there is a problem with the sleeping setting.
I made some changes, I changed the profile to normal battery consumption, not smart or ultra battery.
The second was to uncheck WiFi optimization, in settings wifi-> options-> advanced.
Let's see how it goes from now on.
Click to expand...
Click to collapse
You did the right steps. It should be fine now.
Thank you. It works, and not so much.
For instance, I have to open facebook after restart, so I can receive notifications (it is set to on at startup manager, it is set to run when screen is off etc.).
But the worst problem is that it doesn't reconnect automatically to known networks. For instance, I come home, my previous phone was reconnecting automatically to my home wifi network, but the P6 not.
I had to go to settings->wifi and then it reconnected (without doing anything more).
Any idea?
danny_zupa said:
Thank you. It works, and not so much.
For instance, I have to open facebook after restart, so I can receive notifications (it is set to on at startup manager, it is set to run when screen is off etc.).
But the worst problem is that it doesn't reconnect automatically to known networks. For instance, I come home, my previous phone was reconnecting automatically to my home wifi network, but the P6 not.
I had to go to settings->wifi and then it reconnected (without doing anything more).
Any idea?
Click to expand...
Click to collapse
Yes. Restore to factory settings.
I'll try that, again, thank you.
But I just did it yesterday, when I reistalled B510.
Didn't work. I wiped everything and still it does the same.
Wi-Fi does not automatically connect to networks whose configurations were already saved. I have to take it to waranty, I don't know what to do more.
Does it work on b132? Mine did that sometimes too on b510. It didnt connect automatically. The avaivable network list came up and had to choose one manually. It remembered passwords.
Im not sure but I think that happened only when connecting to a different wifi than the one used before.
I didn't use it that much on B132, I made the update as soon as I bought it.
It is normal not to connect to a new network, but it's not normal not to connect to a previous used network, known network, for instance at home.
Maybe I'll upgrade to 4.4.4, but I think it will do the same.

Categories

Resources