Hi all!
I recently upgraded to WM6/AX3L. This excellent ROM solved many problems I had with WM5, such as SD card problems, USB connection problems with activesync and the missing sync... I am really happy with it!
I was aware of a lot of people suffering the auto-pressing of the "start button", and blaming the LCD screen and high temperature. But, in 6 months using WM5, it never happened to me.
5 minutes after installing WM6 I started suffering this problem. It is not very serious, as it only happen quite sporadically.
This problem is specific of WM6? or this is not related and it was just a random coincidence?
it's a problem of your device... many p3600 have this issue, it's not a problem releated wm6 rom.
Guybrush said:
it's a problem of your device... many p3600 have this issue, it's not a problem releated wm6 rom.
Click to expand...
Click to collapse
yes, is a hardware problem...
see warranty, in case go in a customarker centre for repaire o change the device!!
yep, it is a hardware problem, not WM6. happened to mine and they replaced the whole unit.... very good service but took 8 weeks for the new one to arrive....
What do you guys mean by autostart? I seem to notice this happening when I use my finger to press something on the touch screen then the start menu comes up sometimes. Is that what you mean?
Or does it appear by itself without touching the screen?
Thanks
touching the screen sometimes device is like press randomly the start button without start button is touched
Hi,
Sure that it's a hardware pb? I've been having this issue with different ROMS and a lot with the FAMAN ROMS. At present I'm running a home-cooked ROM and don't have this pb any more (not once in the last week).
Also with FAMAN this pb occured a lot in similar situations (almost able to reproduce it on demand), ex.: when entering the third digit of the Pin-code.
I'm not saying that this can't be an hardware issue, but as far as I am/was concerned, it seemed rather software/ROM related or a mix out of both.
Bye.
Your device is broken
I had the same problem.
Sent it for repair and got a complete new device.
There is a treat about this in the normal trinity forum (not the WM6 forum). It has nothing to do with any rom!
Just out of curiousity...
Since the Trinity P3600 is out of production now...do you think they would replace a faulty phone with the new P3600i?
ervius said:
yes, is a hardware problem...
see warranty, in case go in a customarker centre for repaire o change the device!!
Click to expand...
Click to collapse
Yea it smells hardwarish... but the strange thing is.. it started to happen 5 seconds after installing WM6... had WM5 for months, heavy use, and NEVER happened. Thats why I asked.
i bet a woman was walking her dog outside the windows at that time too
It happens to me when I try to press about the center of the screen with my index finger. Never happens when I'm tapping with the stylus though.
mm gotta give a try. When it happens, I am always using my fingers. As I lost the stylus can't try :S
Related
Hi ,
I noticed this on all the WM6 Roms ( never even used the real WM5 ATT ROM)
But when you open the qwerty keyboard and start typing fast the light goes off and then when you press any botton it goes back on. I`m just wondering if its my unit or is it just ROMs flaw ? I didnt see anyone talking about this so I`m starting to think its my unit. Thanks in advance.
Mine's done that. It usually goes off when the phone tries to do something else, like checking or downloading email.
Also, turn off the word suggestion feature, that just caused problems such as missed letters, and I think it added to the light turn off problem as well.
harlenm said:
Mine's done that. It usually goes off when the phone tries to do something else, like checking or downloading email.
Also, turn off the word suggestion feature, that just caused problems such as missed letters, and I think it added to the light turn off problem as well.
Click to expand...
Click to collapse
yeah I always turn that off. didn't notice that it happenes durring something. thanks for the reply
yozh said:
Hi ,
I noticed this on all the WM6 Roms ( never even used the real WM5 ATT ROM)
But when you open the qwerty keyboard and start typing fast the light goes off and then when you press any botton it goes back on. I`m just wondering if its my unit or is it just ROMs flaw ? I didnt see anyone talking about this so I`m starting to think its my unit. Thanks in advance.
Click to expand...
Click to collapse
i don't think it particularly happens on wm6. it happened when i used jap wm5 by softbank, and it still happens with lvsw. thought it was more like a hardware issue.
qtotter said:
i don't think it particularly happens on wm6. it happened when i used jap wm5 by softbank, and it still happens with lvsw. thought it was more like a hardware issue.
Click to expand...
Click to collapse
ok thank god Im not alone
qtotter said:
i don't think it particularly happens on wm6. it happened when i used jap wm5 by softbank, and it still happens with lvsw. thought it was more like a hardware issue.
Click to expand...
Click to collapse
it used to happen to me on black pro 3.0
It's happened on all WM6 ROMs that I've tried (Custel, LVSW, JJ). There was a dicussion on this, and changing the word completion helped but did not completely resolve the issue.
BorisTheSpider said:
It's happened on all WM6 ROMs that I've tried (Custel, LVSW, JJ). There was a dicussion on this, and changing the word completion helped but did not completely resolve the issue.
Click to expand...
Click to collapse
I always had the it off, just "Enable Auto Correct" on and since day one and it does it, it does it less on the black IV, but still does it.
There is a peculiar problem in hermes(the best device ever made). Some times the phone led (green) blinks where as the display is off and it fails to start up even if u soft reset.
in the meanwhile if some one calls u he will get a ring but u wont be notified by ur device
this will make the person calling think u r avoiding him
this is the perfect solution tried on atlest 50 hermes
Plz install the following cab then switch off ur device then switch it on again and wolla the sleep to death problem is gone
Take care
HTC zindabad (i.e. long live HTC)
Guess you forgot the cab?
Edit: Ok, here it is now ;-)
Anyone tried this???
To be honest: I find it a little hard to believe: threads all over the place about this SOD. All chiefs searching and searching for the solution.
And now in your first post you have the solution?
Hope it's its true...
Could you please give us some more information than "this is the perfect solution..."?
How does this patch work? any technical detail as to how this fixes the issue?
Great if it does but a little skeptical without any detail?
Cheers
Lee
nittin_sp said:
There is a peculiar problem in hermes(the best device ever made). Some times the phone led (green) blinks where as the display is off and it fails to start up even if u soft reset.
in the meanwhile if some one calls u he will get a ring but u wont be notified by ur device
this will make the person calling think u r avoiding him
this is the perfect solution tried on atlest 50 hermes
Plz install the following cab then switch off ur device then switch it on again and wolla the sleep to death problem is gone
Take care
HTC zindabad (i.e. long live HTC)
Click to expand...
Click to collapse
I agree with pietrucci,
please ... Anyone tried this CAB? we need our forum seniors & moderators answering us.
Thanx for your efforts nittin_sp, and hope it's truly works.
pietrucci said:
Anyone tried this???
To be honest: I find it a little hard to believe: threads all over the place about this SOD. All chiefs searching and searching for the solution.
And now in your first post you have the solution?
Hope it's its true...
Could you please give us some more information than "this is the perfect solution..."?
Click to expand...
Click to collapse
To tell you the truth I have never been able to reproduce the SOD problem whatsoever. I still can't figure out what the heck is causing it.
Anyway, if you doubt nittin_sp, maybe you should tr it yourself and see if it solves the problem.
This was rather uncourteous...
Kevlar-Source said:
To tell you the truth I have never been able to reproduce the SOD problem whatsoever. I still can't figure out what the heck is causing it.
Anyway, if you doubt nittin_sp, maybe you should tr it yourself and see if it solves the problem.
This was rather uncourteous...
Click to expand...
Click to collapse
Didn't mean to be uncourteous...
SOD
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Running new official wm6 no more sod here so cannot verify that it works, but I had alot of sod in various other roms and if this is a solution the senior members/cooks should disect it and figure out what is the real cause of them and what exactly this fixes since they are not so forthcoming.
edit, wait reading it again it says that even soft reset fails to start up, if that is true they are not talking about any sod I have ever had soft reset does what it does resets the device and boots up.
There were many quick fixes trying to figure out the sod problem, sd card issues, active sync turning on etc, maybe this is a cab that does that.
Psiodon
I will try this
I have had SOD's several times a week.
Will try this and get back to you in a couple of days
I find that I have to SRS every morning after not touching the device all night. I have installed this cab and will report back tomorrow about the behavior of the device. It would be wonderful if this actually works. I am keeping an open mind about it.
I don't understand why you're being so mysterious about this nittin_sp. From what I can tell using IDA Pro (sorry, but I am reluctant to simply load something on faith based on "100% fix" claims alone), your patch simply sets the DWORD value "DisableAutoSuspend" in HKLM\SOFTWARE\Microsoft\Bluetooth\sys to a 1. Interestingly, on my TyTN running WM6 this is already set to a 1.
Sometimes its easier to just say this rather then create a cab. That way the rest of the community can work off your findings and perhaps explore this SOD issue better.
If your cab does more than this then please share your knowledge so we can further explore this hermes issue.
ok so I installed this. I've not had any BSOD's since doing so in a 24 hour period, when normally I'm getting them alteast every hour, sometimes more than 1 in an hour. Will report more soon. Would be good if you can post what this does though as I'd like the ROM cooks to build it in.
duttythroy said:
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Click to expand...
Click to collapse
Hi,
Sorry if this is a dumb question - why do you need to extract the ROM and EXTENDED ROM after flashing the original operator ROM and then flash WM6?
Would it be the same if I just flash the official WM6 and reflash with the cooked WM6?
Thanks!
As promised, I am reporting my results. While I have no idea what this patch is doing, for the first time since I have had this device, I have not had a single failure. Coincidence? We will see in 24 hour.
perlmane said:
As promised, I am reporting my results. While I have no idea what this patch is doing, for the first time since I have had this device, I have not had a single failure. Coincidence? We will see in 24 hour.
Click to expand...
Click to collapse
Well unfortunately I have had the problem happen to me once, and I have larger batter drain than before.
jocool said:
Well unfortunately I have had the problem happen to me once, and I have larger batter drain than before.
Click to expand...
Click to collapse
I have not noticed any increase in battery drain, but I did not use the phone much on the weekend. The reality is, the only time I have the problem is when I do not touch the phone and it goes to sleep. When it wakes up, there is an apparent memory issue that SRS easily resolves. But, since I have installed this cab, the issue has not reappeared - yet.
yup over 24 hours and no issue... Its looking good.
spoke too soon - still sod... reduced but still present - what does this hack do exactly?
[email protected] said:
spoke too soon - still sod... reduced but still present - what does this hack do exactly?
Click to expand...
Click to collapse
Me too. Mine just failed about 5 minutes ago. Too bad.
Dear,
Yesterday, suddenly, the buttons on the "front" of the phone (mail, Internet, OK, D-Pad, etc) stop working "sometimes" (50~60% percent, maybe). I thought about ROM problem but I flashed twice with other ROMs and the problem persists.
I thought also a hardware problem, but it's quite strange, because it's not one or two buttons, it's all front buttons (also, buttons on the side seems that work always).
Any idea?
Thanks
Sesaru
I experienced this also on one hermes. This problem was already decribed on this forum (do a search) and seemed caused by a connector between the board containing the button's electronic and a flat cable. Some people solved the problem by disassembling their hermes and by putting some piece of foam behind the connector. On my hermes, it was not that issue. It was in fact the board itself where humidity caused the destruction of some wiring. By pressing on the board, the hermes was again functionning for a moment and then, same problem again. This was also accompaigned by the "white screen" effect. But not always. Another symptom was a row of some pixels on the top of the screen reproducing the bottom of the same screen. Only solution: replace the board.
In my opinion, it is well a hardware problem.
Hope this helps
I have the same problem, along with the white screen of death.
Check the link at the bottom of this thread: http://forum.xda-developers.com/showthread.php?t=394830
I'll check. Thank you very much!!!
Cesar
sesaru said:
Dear,
Yesterday, suddenly, the buttons on the "front" of the phone (mail, Internet, OK, D-Pad, etc) stop working "sometimes" (50~60% percent, maybe). I thought about ROM problem but I flashed twice with other ROMs and the problem persists.
I thought also a hardware problem, but it's quite strange, because it's not one or two buttons, it's all front buttons (also, buttons on the side seems that work always).
Any idea?
Thanks
Sesaru
Click to expand...
Click to collapse
Did you happen to just flash a new rom and the problem started??
tytnguy said:
Did you happen to just flash a new rom and the problem started??
Click to expand...
Click to collapse
No, it happened suddenly. I flashed after that, thinking in a ROM problem.
Anyway, I think I could fix it. I just slide the keyboard, and (sorry for my English, I'm not sure how to do say this) 'tighten the two smalls screws" on the back of the screen (the were a bit detached). After that, it seems that it works fine
Thanks!
Sesaru
sesaru said:
No, it happened suddenly. I flashed after that, thinking in a ROM problem.
Anyway, I think I could fix it. I just slide the keyboard, and (sorry for my English, I'm not sure how to do say this) 'tighten the two smalls screws" on the back of the screen (the were a bit detached). After that, it seems that it works fine
Thanks!
Sesaru
Click to expand...
Click to collapse
Glad that worked!
I had a similar issue with one of the new rom i installed and later installing some other roms(couple of times though) fixed the issue. I still do not kn ow what was the real problem
Tightening the screws will work for a little while, but you are likely to see the problems return, and eventually the WSOD errors. Exact same thing has happened to many users. I recommend reading through the threads on it. There are few solutions that involve opening the thing right up (just so your prepared if it happens, which fingers crossed it wont).
xternal said:
Tightening the screws will work for a little while, but you are likely to see the problems return, and eventually the WSOD errors. Exact same thing has happened to many users. I recommend reading through the threads on it. There are few solutions that involve opening the thing right up (just so your prepared if it happens, which fingers crossed it wont).
Click to expand...
Click to collapse
Do y mean this one?
http://forum.xda-developers.com/showthread.php?t=394830
Or other ones?
So I've been using the same ROM (in my sig) on my T-Mobile TP2 for 2 weeks now. Last night I tried to wake my phone (it was on for 8 hours already; being used 4 hours prior to make a PowerPoint using JetCet Presenter 5), and the phone wouldn't wake up. I pressed the soft reset button on the side, and everything was fine. I pressed the power button again before I put it in my holster. Ten minutes later, I pressed the power button to wake it, and it wouldn't wake up again! I did the soft reset thing, and battery was down 5-10%, so I know the phone was on the whole time.
I did a hard reset, and still had same problems. I was going to return it with warranty, so I flashed the stock T-Mobile WM6.1 ROM and everything was fine (I couldn't replicate any of my problems). I went to a different ROM (the latest Valkyrie Leo 23815, I believe?), and I got the same "can't wake" problem.
Now my real problem is the fact that I can't replicate it on the stock ROM. I think it's not the custom ROM because I've used the same one for 2 weeks. I don't know how I can get a warranty swap in this situation... It's not like I can say "Look, I have your stock WM6.1 ROM and it works. How come it can't work with a custom ROM?!"
*I confess I did just download the JetCet Presenter5 cab from these forums just two days ago. I made a PPT (as stated in the first paragraph) for a class and I saved it on my SDHC card. It was working afterwards, but the "can't wake" problem only occurred 4 hours later, and still persists after the hard reset.
Can I please get any help here? I really need a working device with a custom ROM and I don't know how to do a warranty swap in this situation.
Thanks.
SOLUTION: post#19.
(I replied this also on TmoNews forum)
What do you have to do create this problem...just wait and it happens eventually? Or does it happen right away the first time it goes into standby, or you put it in standby? Or is there a specific sequece of events?
How long did you wait after flashing the stock WM6.1 to see if the problem came up?
Maybe you could try flashing the "hidden" official WM6.5 rom...just on the chance that it might fix/delete whatever is wrong. Or it might show the problem so you could return it...after the Jan-20 official release.
Good luck
MCbrian said:
(I replied this also on TmoNews forum)
What do you have to do create this problem...just wait and it happens eventually? Or does it happen right away the first time it goes into standby, or you put it in standby? Or is there a specific sequece of events?
How long did you wait after flashing the stock WM6.1 to see if the problem came up?
Maybe you could try flashing the "hidden" official WM6.5 rom...just on the chance that it might fix/delete whatever is wrong. Or it might show the problem so you could return it...after the Jan-20 official release.
Good luck
Click to expand...
Click to collapse
(Replied this on TmoNews, but this might help others willing to help out)
On the custom ROMs, the first time it goes into standby, I can't wake the phone anymore and I just noticed that it won't recognize the USB cable (no charge from the outlet; no sync with the PC). If I soft reset and prevent it from going to standby, everything's normal (even the USB problem).
I flashed the stock WM6.1 ROM one hour before my first post. Everything is fine except for the annoying old Start Menu and the small, non-finger-friendly buttons!
I'll try the "hidden" official ROM now, just in case. I just don't know how I'll survive without WM6.5.x until after the official release date!
Thanks! I'll need the luck.
...So I think after all the testing I've done, and the weird problems others have posted [in various threads], I believe the problems I've experienced were a result of the new Sense2.5 build 1922 ROMs.
I just flashed the old EnergyROM Dec.4 Leo 28008 (Sense2.5 build 1921) and the problems are no longer present.
Newbie to WM!!!
Having similar Problems with my TP2. My phone has had several "wake up" probs since I have the phone. I installed directly after purchasing the WM 6.5 ROM directly from HTC-support (german). My real problems are right now that my alarm clock is not working properly (sometimes it works, sometimes not) and my phone often does not wake up after stand-by. Last night watched the clock at 04:30 and almost got problems caused by a non working alarm clock... (phone was connected to power supply)
anyone knows more about it? Is it a bug? user faults?
additional added software: Brians Task bar, Mort-player and powerbutton 12.
Just wanna get sure, that the phone is not damaged from hardware's site (warranty)...
Well.. I have (in this days) this problem.. It seems that it's getting worst day by day.
First of all: I've never used a "cooked" rom!
I had the original HTC rom (6.1).
I had this problem so I flashed the 6.5 update and it magically was solved!
Everithing was fine till 4-5 days ago: I can't understand what is the problem..
But I had only one time an "alarm problem".. But maybe was my fault..
I don't know what is the problem but it is NOT related to "cooked rom".
The worst thing is that RADIO MODULE IS ON!
So people call you, write you.. AND THEY KNOW YOUR PHONE IS ON!!!!!
This is totally unacceptable!!!
I would try a coked ROM.. But, as I can read, it would be useless..
And anyway: What is the most STABLE ROM in this jungle?
I'll write to italian HTC support.. I don't know if they will solve anything..
To: chrizz.o and DJ Palmis
chrizz.o: The alarm clock in WM is unreliable sometimes. You could download a 3rd party app alarm clock like Klaxon or G-Alarm.
DJ Palmis: You could also download an alarm app (see my response to chrizz.o). I don't know if you're talking about you can't turn your screen on after it goes into standby (my problem).
I don't know if you guys are confused but my problem is: I can't turn on the screen if the phone goes in standby (screen goes off). The phone is still on, but the screen is permanently off. This only happens to me in the new custom Leo ROMs. It doesn't happen in stock ROMs or old custom ROMs, so I cannot return it.
DJ Palmis, I don't know why it's happening in a stock ROM. You can try a hard-reset (wipe device) by pressing/holding Power button, Talk/Send key, and End key at the same time when the phone is off. That might help. If it doesn't, return it to HTC.
BTW, I think the most stable ROMs are the EnergyROMs, ValkyrieROMs, and the Rhodium_AF (ark666) ROMs.
Same issue w Att Tilt 2
I'm experiencing the same issue, occasionally the screen won't come on from standby when I know the phone is on. It shipped with 6.5 and it remains with the stock rom.
The issue is so hit-&-miss that it is difficult/impossible to trouble shoot.
sumflipnol said:
chrizz.o:I don't know if you guys are confused but my problem is: I can't turn on the screen if the phone goes in standby (screen goes off). The phone is still on, but the screen is permanently off. This only happens to me in the new custom Leo ROMs. It doesn't happen in stock ROMs or old custom ROMs, so I cannot return it.
Click to expand...
Click to collapse
I think we have the same problem, indeed. And i don't want to hard reset because i did not change anything in the last weeks.. I'm only using my phone more frequently.. So more text messages, videocall and so on..
But this does not justify this problem.
It would be nice to know what happens during this "freeze".
Maybe it is related to notification queue (that's why a new rom "solves" problem for a while)?
Well.. Anyway I had this problem on my old HTC Universal.. So it is related to WinMobile or Qualcom..
when i had a issue similar to that. i just hard reset my touch pro and flashed a whole new rom. and hard resetted again and i was bug and error free.
charlieb620 said:
when i had a issue similar to that. i just hard reset my touch pro and flashed a whole new rom. and hard resetted again and i was bug and error free.
Click to expand...
Click to collapse
The OPs issue must be a little different.
He tried flashing several different roms -- stock and custom -- and only the stock T-MoUSA WM6.1 or WM6.5 roms or custom roms that were a month or two old would stay "fixed".
sumflipnol said:
chrizz.o: The alarm clock in WM is unreliable sometimes. You could download a 3rd party app alarm clock like Klaxon or G-Alarm.
Click to expand...
Click to collapse
Cheers for upadating me. Appreciate it. Will try another alarm clock in a while. BUT: I use mort's player as an additional "alarm", as well, and even that does not work propperly. Might be, that it is no real alarm clock. strange and weird.
But it is good to know, that the "will-not-wake-up" problems are more or less known by several other users. I almost thought it is my stupidity to use a win mobile phone *lol*
Does anybody know, eventually, if there's a more stable rom (maybe with the new manila like on HD2) for germany which might solve the freezing problem?
thxx for updates
I'm also getting will not wake problems on the leaked official TmoUS WM 6.5 Rom. I would get it about twice a day. My stock tmobile US 6.1 never had this issue.
A fix that works for me:
Change the power settings to always on for a like 10 minutes and put the default settings back. You would have to do this after every soft reboot.
HTC Italy told me to set Band selection to auto (booth choices) and to change network selection (auto if set to manual or manual if auto) and then they told me to soft reset by button.
I'll write you if I have news.. But i think they know something more than us about this problem. And they are on the way of solving because i noticed that this problem happens in bad quality signal areas and ALWAYS when phone is ON.. So it is related to radio module.
I think it may be related to SIM card, too.
Because they told me to change SIM.. And at last to do an Hard Reset..
Maybe my 3 card is not fully compatible with my radio version?
Hey,
thxx for the updates. Indeed, I have quality differences in our flat, bandwidth switching between HSDPA, 3G and GPRS, depends on, in which room I am.
Asking HTC Germany about this problem, they told me, it is a not known issue. The more I follow up here, I cannot believe that.
Do you really think, it may also be caused by the SIM-card? Mine is about 2 years old (VF GER).
chrizz.o said:
Do you really think, it may also be caused by the SIM-card? Mine is about 2 years old (VF GER).
Click to expand...
Click to collapse
Mine too!
What I know is that i had this problem on my old HTC Universal... So maybe problem is not in the "age" of SIM card.. But in some technical compatibility between SIM and Qualcom.. (You know: 64 KB, 128KB and so on..).
Maybe Qualcom has some problem on european SIM card? I don't know..
DJ Palmis said:
I think it may be related to SIM card, too.
Because they told me to change SIM.. And at last to do an Hard Reset..
Maybe my 3 card is not fully compatible with my radio version?
Click to expand...
Click to collapse
I read somewhere in a ROM thread (I don't remember exactly where) that some people are experiencing constant freezing on their phones after a few weeks of use. Someone recommended taking out the SD card because it might be corrupt, and that interferes with the phone's performance. Some people said it worked; they found out their SD cards were actually corrupt, and using a new one made the phone function well.
Having used ValkyrieROMs before, I remember a pre-installed app (I forgot the name) that let you format your SD card. When I tried it (even after I formatted my SD card to FAT32 on my PC), the app said my SD card was corrupt and cannot be located. The last time I used the app was 1+ months ago. I think I'll try to flash a ROM without the SD card when I have time.
...But I still don't know how the SD card would give me a problem with a (new) ROM that I had on my phone for 2 weeks...and no problem on an older ROM (that I have now)...
sumflipnol said:
SD card because it might be corrupt,
Click to expand...
Click to collapse
Well I don't know, What I can say you is that till now i have no problem with HTC istructions.. Maybe i solved.. I hope..
SOLUTION!!!
I finally got my phone working with new ROMs again!
It was the SD card! I connected my TP2 to the PC as a "Disk Drive" and I went to My Computer > [right click] Removable Storage (SD card) > Properties > Tools > fix... something something (I can't remember exact words). It fixed the corrupt SDHC card I have; now my phone is working again!
This might help you, too, DJ Palmis...
Just had done this right before the last freezing-problem. My SD-card was not corrupt, so this did not solve my problem.
At least I swapped my SIM-card, made another hardreset and checked my SD-card again. Let's see what's happening...
Hi
I have another problem with HTC Touch Pro 2 regarding turning the phone on than has been posted in the forums.
Sometimes(every second day) my touch pro 2 wont turn on using the on/off button.
I will have to do a reset(on reset button) to turn the phone back on.
Any idea what can cause this?
HTC Touch Pro 2 using original Danish ROM. Both current version and also a problem first version.
it is called the sleep of death (SOD) , and afaik it has been solved, but I don't know any more about it as I never had it my self !
follow this
http://forum.xda-developers.com/showpost.php?p=5934002&postcount=10
ice_coffee said:
it is called the sleep of death (SOD) , and afaik it has been solved, but I don't know any more about it as I never had it my self !
follow this
http://forum.xda-developers.com/showpost.php?p=5934002&postcount=10
Click to expand...
Click to collapse
Not solved. Author of thread that you pointed to denies it is a SOD fix.
There could be several reasons for the SOD.
Please check out my page about SOD's and comment if you are able to fix it!
http://forum.xda-developers.com/showthread.php?t=704240
last 2 days ive had a similar issue, wont wake with power button when it's slid open
it may be an obvious troubleshooting measure, but have you guys installed any new software recently? if so uninstall...even apps from the marketplace can cause various issues...
I have been having the same problem for several weeks. my phone has been repaired twice and I now have new phone and still getting the same problem. If I disable the data connection it seems to solve the problem but that kind of defeats the object of this type of phone. Disabling the facebook sync option seems to greatly reduce the occurance. I am on t-mobile uk and using stock roms with no additional software.
My experience has been that SOD is not actually SOD but rather just a temporary thing. Put it back in your pocket and try again in few minutes.
had this the first week of ownership, in my case went into the vodafone shop and reported the problem where they swapped the battery in my phone.problem solved.
Hi...I had this same problem with my Sprint TP2. It has now been fixed, but I had to install a custom ROM. I installed the NRG Rom and since then, I have not had the SOD. I believe that Google Maps was causing the phone to enter the sleep, however, I am not positive.
The NRG Max Manila Rom is excellent. I would just install it if I were you and everything will be fine.
-Chris
Try installing LUMOS to avoid SOD
i have a couple of TP2 with the SOD problem.
I read several post recommending LUMOS, so i did a quick test and it seems that it's really solving the SOD and also giving a little more battery dimming the screen.
Give it a try and let us know your comments.
I know your post is old, but my SOD problem is new. What is LUMOS?
Patrick
vpease said:
i have a couple of TP2 with the SOD problem.
I read several post recommending LUMOS, so i did a quick test and it seems that it's really solving the SOD and also giving a little more battery dimming the screen.
Give it a try and let us know your comments.
Click to expand...
Click to collapse
phhill3 said:
I know your post is old, but my SOD problem is new. What is LUMOS?
Patrick
Click to expand...
Click to collapse
Way to thread necro indeed...
I assume he means this app.
I've seen what sounds like this problem on my TP2 and have found the way to revive the phone is to call it from another phone.