Hi,
I've flashed my P3300 with the PDAMobiz_P800W_AKU301_v1.1.2_PowerMap ROM.
Most things are working great except I don't seem to have any trace of wifi, that is, nothing in the comm manager nor anywhere else.
Any advise is appriciated.
BTW - if anyone can recommend another stable ROM instead....
Cheers,
Roy
Related
Ok, I'm new to cooking but I know my phone works as I've been running it under the Xda SE rom for a couple months and thought I would have a go at running ppc2003.
So I installed the standard upgrade from siemens to get the radio stack upgraded and make sure that it would all work fine and then got the bright idea that I need to customize it to my tastes.
I cooked up a rom at lumpi's site and it all seems to work till I turn it off or it times out and turns itself off at which point it will not turn back on unless i perform a soft reset, not for sync, phonecall or power button press, although the led for the phone still flashes.
If anyone has any suggestions as to how to fix this with out reflashing it would be great as this seems to be the only problem.
Thank you in advance for any help that anyone can provide.
Rom Version: A.30.09 Eng
Rom Date: 01/01/04
Radio Version: A.33.02
Protocol version: 1.3.3
does it come on when you put power on it by any means of charging?
no it doesn't it the led just changes to orange as it normally does when its charging. I thought about that when I posted as I saw there was another guy that was having the same problem.
Similar problem
Apo11yon
I've got similar problem, all external buttons locked after using xdaunlock have now tried 4 cooked roms,coming round to idea that it may be battery fault(see my postings?!)
Silent D :? :x
actually yes that was the posting i was referring to I have cooked two roms with the same result that being everything seems to work fine until the unit is turned off and then it wont turn back on without a softboot, i know my battery is good as I mentioned and I did switch back to the standard version on ppc2003 and it does work fine so I'm pretty sure its a software related problem, I was just hoping someone out there might be familiar with the problem and have a solution.
cook a rom with no added programs, install, and see if you have a problems after. i had thevsame prob bc i cooked kse truefax into tmo 4.1.16. Reflashed my device with thevsame rom and progs -kse, and all is well....
good luck!
thanks for the advice in both of the roms that I built I included truefax so I would be inclined to think that that would be it.
no prob.
did a rebuild less the fax app and it works great, should be a notice on the site that it may cause difficulties even better would be a listing of apps that conflict with each other or possibly the os
thanks again for the help fellow
Hi all Im new here.
I just Got the M650 Orange from Poland and I live in US
so i flashed the polish orange rom to the new wm6 HTC_P3300_WWE_3.13.405.1
Now are there any settings in windows to do anything with the build in gps cause my tomtom 6 is not recognizing it at all. It just says no gps device all the time.
Do i need to install a special driver?
how do i get me gps to work?
Thank guys.
Ok i got it I flased it with another rom an it works now
Thanks
hey everyone i recently purchased a cingular 8525 with wm5 and decided that it would be a good idea to upgrade to wm6 (don't know exactly why but i did it) anywho... after i did so i found out that the wifi does not work anymore and i'm new at this so i have no idea what could possibly be the prob. Before i upgraded the os, wifi worked like a charm didn't really have to configure it or anything just detect settings and available wireless signals etc and that was it. pleeeez ppl who ever knows what i'm talking about please pretty please help cuz this is annoying me
Hi
Which ROM did you upgrade to, also, did you flash HardSPL before that? which Radio ROM are you running, and does the WIFI actually turn on when you use the comm manager?
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
After flashing roms I had the same problem..make sure under the tab network adapters the line that says My network cards connects to..is set on internet..most roms start out with it on work..that change always works for me
So i deceided to downgrade the rom from wm6 to wm5 and yes apparently it has something to do with the rom version because my wifi connection works again!! with the old version which is wm5, but the moment I upgraded again to v6 it stopped working and like I said everything in the settings seems to be working fine, there’s just no internet, I should just be happy with the old version of windows mobile but version 6 has some features that I really liked does somebody know why this is happening? and if yes is there a solution? It might b more obvious than I think but I really don’t know so I really appreciate those who post help and advise thank you!
Put it back to WM 6.0..we will figure out what is wrong. There are alot of really good people on this forum and the answer to your problem is here. WM 6 is so much better.
Thanx for the support and the advise. So i installed another version of wm6 this one seems to be for Dopod but at least the internet works!!, the one i previously installed was an official version of wm6 for cingular which like i said before, for some strange reason i was not able to use the internet with wifi my only concern with having this Dopod version is that... well... its for the Dopod and does not come with the features that cingular offers to AT&T/ cingular users like myself. But then again it seems like everything else works just fine I just wonder why the cingular version doesn't work?
Sounds like your a little new to this. Here one of the golden rules:check out the hermes wiki and learn alittle about the flashing process and the different roms and their settings. There are alot of good roms out there that set up for ATT users, like K's Rom ,which is what I've been using for months. Works fine right after flashing. It has the right amount of programs and tweaks. Do alittle research and it will be worth it. It may take a couple different roms to find what you are looking for. Make sure you HardSpl your phone(the guide of flashing is in the wiki) Good Luck
i second blackout128's post
read the wiki
install hard spl
flash to your hearts content!
although, make sure you read the threads first! good luck and welcome to hotel d'hermes!
siskus said:
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
Click to expand...
Click to collapse
Had same problem with WIFI using (RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe) ROM. Had to disable the Cingular proxy. Select: START-PROGRAMS-PROXY MANAGER-DISABLE PROXY. After that, was able to connect to the internet with WIFI.
Hello everybody!
I have noticed, there are problems with ActiveSync after ROM flashing appearing.
To be specific, ActiveSync activates itself automatically, without any obvious reason. ActiveSync window is also activated whenever an USB connector is used (thus also when charging only)!
I went through the several threads already, finding two fix-tips mentioned in there. However none of them seems to work in my case:
1) http://forum.xda-developers.com/showpost.php?p=2798581&postcount=4757
2) http://forum.xda-developers.com/showpost.php?p=2807581&postcount=4789
I have to admit, I am also surprised by the fact that I have the same problem independently on the ROM flashed (experienced with A.Z.T.O.R. V7 & SwiftBL Diamond V7.5 Full so far – that’s also the reason why I’ve decided to set this new thread).
Can somebody help me to solve this problem (which is obviously bothering more users already)?
Dou you have any explanation to this behavior?
FYI:
My initial ROM: O2 GE ROM 1.37
Actual ROM:
SPL: 1.40.OliNex
A.Z.T.O.R. V7 (previously SwiftBL Diamond V7.5 Full tested)
May the reason be some improper flash-procedure?
What is the reason of hard-reset after flash? (When it should be done?)
Many thanks for any replays in advance…
Hi !
I have the same problem.
I dont know if the problem was there in the officil ROM,
but i have Swift 7.5 ROM and it has the activesynckill,
but no result. ActiveSync starts on itself.
Hm, maybe someone find a resolution to this problem.
severoprisan said:
Hi !
I have the same problem.
I dont know if the problem was there in the officil ROM,
but i have Swift 7.5 ROM and it has the activesynckill,
but no result. ActiveSync starts on itself.
Hm, maybe someone find a resolution to this problem.
Click to expand...
Click to collapse
Search for Elias async killer
http://forum.xda-developers.com/showthread.php?t=436099&highlight=elias+async
Works fine for me.
Ciao, Andrea
The problem is that even after I close AS
it starts by itself without connecting the phone
to the pc. Is runing in the background. If I see it
I close it and after some time there it is again,
runing in the background.
So do I have the same problem and the solution mentioned above couldn't solve the problem.
Waiting for help, too.
Thanks
Genius2000 said:
Search for Elias async killer
http://forum.xda-developers.com/showthread.php?t=436099&highlight=elias+async
Works fine for me.
Ciao, Andrea
Click to expand...
Click to collapse
Hello Andrea,
thanks for the link to the Elias async killer. I'll try it ... however I would like to UNDERSTAND the thing! ;-)
I would like to know why there are SOME users having this problem, when some others never heard about it! There has to be some reason causing this kind of trouble...
I don't like using extra fix generally, I prefer finding the solution! ;-)
So, can anybody help, please?
EDIT: done.
hello,
please help me if you can. i have an artemis and the gp won't work. i don't know why.
Can anybody help me please.
what can i do?
thanks
gps error
The gps receiver can not be found
Why does these error appears?
Can anyoane help me?
Maybe it is not configured for comm4 input
Don
try:
-hard reset
-settings on com4, baudrate 4800 and manage gps automatically
-try other rom (don't know which one you are using)
good luck
Hi
same thing for me
cant found gps after flashing orange rom to p3300 original rom with tomtom
com4 window manage gps
how i can resolve problem
br
toze
similar problem
Same problem with me...
I have the rom no_nonsense_5 that was supposed to have the gps problem fixed...
I can find the gps device on the com port number 3 with a nice utility i found on the web thath can scan the ports to find out all the devices connected.
But even if i set the hw port on 3 and the automatic gps control i can't see the gps working.
When I start my tomtom navigator 6 i set it up to find the anema (wtf is that?) gps device on port 3 with 4800 I can see the satellite connection working, but really slowly and uncontinously... (also with another utility called gps test).
I cannot understand if the problem is:
-the rom
-tomtom
-hardware
-radio-rom (can anyone explain me what is the "radio-rom"?? I tryed to find out information but I really couldn't find anything... noob...).
Any suggestion?
Thanks in advance..
Flash with this ROM and you will have GPS again
http://forum.xda-developers.com/showthread.php?t=410912
...then...if you want...you can try again to flash with your ROM...I've had same problem and now it's solved...
Vestat said:
Same problem with me...
-radio-rom (can anyone explain me what is the "radio-rom"?? I tryed to find out information but I really couldn't find anything... noob...).
Click to expand...
Click to collapse
The radio-rom is a special rom for the hardware of your cellphone, something like a firmware to keep it simple. You can flash a different radio rom that might change the battery drain, the signal quality of the phone, wifi, bluetooth, GPS,... without having to reinstall your 'normal' rom.
There is nothing like a 'best' radio rom. Alot of people have different experiences with the same rom. You just need to go and try for yourself.