Develop Bugs

is it bricked ?

i tried to do a beasty wm6 rom update, everything went well, and at the end of the procedure, it ask me to "press 0 to restaure factory setting" for rebooting, i press 0 and then....nothing. Impossible to start the htc, i can only access bootloader mode, but ain't no more recognize by the pc, i tried to plug it to AC power as i thought of a battery prob, and still nothing, no start, and no led telling me that it's recharging...
i ve done some search on the forum, but can't see something similar to this.
anyhelp welcome
regards

Hi,
did you try to downgrade it to WM5? I also had problems with WM6 and after a downgrade to WM5 it worked again.
Cheers
Michael

sorry wrong thread.

well now when i connect it to my pc it says unknown device, so i dunno how to reflash to wm5
im on vista 64, and when i try to install the 64 driver it gave me on error about a corrupted driver...

Hi
I have the same problem,cannot recognize the usb port.
Anyone has an idea??

try changing your cable and if possible try using a xp machine. i have heard of people having problems when flashing with vista (i did it and no problems)
If after you change the cable, and use a differente computer the universal when you put it in bootloader mode and the word SERIAL does not change to USB i would say its pretty much bricked but if you only flashed your device i would say it is still possible to bring it back from death.
try changing your cable (specially if its the one you usually use) im almost sure thats your problem.
also make sure you dont have the sd card or the sim in it that seems to help too.
best regards and best of luck
Erik

luxeomni said:
im on vista 64,
Click to expand...
Click to collapse
Thats your problem! Vista is very shaky at best with flashing via USB on HTC devices.
Reflash to WM5 using the SDCard method.
Psi

this worked for me
follow the directions on this thread it worked for me http://forum.xda-developers.com/showthread.php?t=291723

Vista Help

Have done several upgrades with vista in the past. Had to format the hard drive and re-install vista. Old drivers that I dowloaded (wceusbsh.inf) will not work. Get a message problem with driver. Have tried re-downloading the driver and same problem. Any help would be greatly appreciated.

Now have gotten the drivers to load o.k. but still no luck in a connect to the device

After spending a couple of hours screwing with everything I could think to try, I have got the Hermes to update again.
# 1 After following Mr Vanx's directions for the Vista upgrade prosses
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
# 2 DO NOT place the unit into bootloder mode, start the Windows Mobile device center (WMDC), plug the usb connection into the unit and wait for the WMDC to show connected, NOW you can run any of the RUU update files.
As Always Mr. Vanx is the man!

Bootloader Mode - Will it Erase Data
I have been having similar problems since I got a new computer that runs VISTA. I have tried everything, and the Device Manager, Portable devices has never given an indication my Mogul 6800 is present. I read the guide that captainrick747 referrs. I am concerned that going into Bootloader mode my system will lose all data and get reset to the original configuration. Should I be worried?

KS20 V08h-01-234-15-04-JUNE-27-2007

Hi all,
I'm getting crazy and tired about this KS20.
I tried everything on this mobile but nothing worked and now emergency mode is only mode I can turn on the thing: not even the hard reset works anymore (booting stucks on vodafone logo).
Corona drivers never worked: reading inf file they are for product ID 6061, but my mobile when connected is product ID 6000 and only LGE usb drivers (downloaded thru the LG update agent) are correctly working.
And LGMDP can see the device but not flash procedure can be initialized on it.
Someone could help me with that please?????

Come guys!
Give me suggestions please!

Hello,
Your message is somewhat confusing that we can help you, otherwise there is already post on this type of problem you should first browse the forum looking for info more precise. The first goal is the flash in emergency mode, after everything is possible ...
By.

rickou26 said:
Hello,
Your message is somewhat confusing that we can help you, otherwise there is already post on this type of problem you should first browse the forum looking for info more precise. The first goal is the flash in emergency mode, after everything is possible ...
By.
Click to expand...
Click to collapse
I searched the forum and googled everything but nothing related to that.
As I wrote in my first post I could not install Corona drivers because, weird enough, device is not recognized by them. I had to install LGE usb drivers thru LG Agent update wizard.
So I can not flash thru LMPD.
Thanks for your reply anyway.

What OS do you use? Do you have administrator rights!

I do have administrator rights.
I do confirm anyway that only LGE USB drivers (they are directly from LG, Product ID 6000) are working fine when in emergency mode.... but they are not Corona drivers (ones signed for Product ID 6061) and LDMP is not working because of that.
Do I have a chance to install rom if I'm not using Corona drivers?

No !
What OS do you use?

Windows xp sp2

I can imagine that none had to deal with this firmware version.
I guess I had to throw away this mobile... such a wate!
Thanks anyway.

delphilip said:
I can imagine that none had to deal with this firmware version.
I guess I had to throw away this mobile... such a wate!
Thanks anyway.
Click to expand...
Click to collapse
Try to gain access to a computer with Windows 7 or Vista, the work better with Corona drivers.
Install the drivers first, restart just to play safe, connect your phone in emergency mode (make sure the green LED is on) and wait for driver detection and installation to finish. If the second driver takes too long to install, then just disconnect the phone and reconnect again. Flash in emergency mode as usual.
In case you have lost your IMEI, use the IMEI restoration tool to generate a new .nv2 file.
Keep updating us on how things work out for you.

If you haven't seen it already, try and have a look at this guide: http://forum.xda-developers.com/showthread.php?t=548447
The part about disabling and enabling the LG driver in Device Manager got my computer to recognize the device in emergency mode so I could flash rickou26's newest ROM on there (and by the way, thanks for the ROM, rickou )

Thanks guys ... i will try your suggestions as soon as I'll be at home again (next week)!

MTM said:
If you haven't seen it already, try and have a look at this guide: http://forum.xda-developers.com/showthread.php?t=548447
The part about disabling and enabling the LG driver in Device Manager got my computer to recognize the device in emergency mode so I could flash rickou26's newest ROM on there (and by the way, thanks for the ROM, rickou )
Click to expand...
Click to collapse
I tried the guide last week but it didn't work for me.
I guess this V08h firmware (not seen anywhere on the web) is a lost cause!

How to Flash your eXpo/IQ

WARNING: DO NOT USE WINDOWS VISTA TO FLASH YOUR PHONE. THERE IS A COMMUNICATION ISSUE WITH VISTA AND THE FLASHER. LG DECIDED NOT TO FIX THIS ISSUE. ONLY FLASH YOUR PHONE USING WINDOWS XP AND WINDOWS 7.
Windows XP​
1. Get the eXpo or IQ flasher (depending on which phone you have). Here is the link:
http://forum.xda-developers.com/showthread.php?t=647900
2. Run the flasher installer.
3. Set the install directory to "C:\Documents and Settings\All Users\Application Data" if it isn't set to that already.
4. Click install
5. Plug the usb cable into your computer.
6. Power off your eXpo/IQ. Once it is powered off slide open the keyboard and hold the space bar while plugging the usb cable into your phone's micro usb port. Emergency download mode should appear on the screen.
7. Wait a couple of seconds to allow your phone and computer to communicate with each other and then press start update on the flasher program.
Note: If you get the message "Cannot detect smartphone. Please check connection." click ok and click install usb drivers. Once the drivers are installed click start update again. You may have to restart the computer for the drivers to take effect.
8. You will then see a screen that says the rom version and "Do you want to update." Click ok. The program will start to update your phone.
Windows 7​
1. Get the eXpo or IQ flasher (depending on which phone you have). Here is the link:
http://forum.xda-developers.com/showthread.php?t=647900
2. Right click the flasher installer and click properties. Now navigate to the Compatibility tab, check Run this program in compatibility mode for, and choose Windows XP (Service Pack 3). Also check run this program as an administrator in the privilege level setting in the compatibility mode tab. Click ok to save. Now run the flasher installer.
3. Set the install directory to "C:\Users\All Users" if it isn't set to that already.
4. Click install
5. Plug the usb cable into your computer.
6. Power off your eXpo/IQ. Once it is powered off slide open the keyboard and hold the space bar while plugging the usb cable into your phone's micro usb port. Emergency download mode should appear on the screen.
7. Wait a couple of seconds to allow your phone and computer to communicate with each other and then press start update on the flasher program.
Note: If you get the message "Cannot detect smartphone. Please check connection." click ok and click install usb drivers. Once the drivers are installed click start update again. You may have to restart the computer for the drivers to take effect.
8. You will then see a screen that says the rom version and "Do you want to update." Click ok. The program will start to update your phone.

Latest version?
Thank you for cooking the LG Expo base rom for flashing. Included MS Office is not 2010 and no threaded email. Included Windows is 6.5. 5.2.2174. Looking forward to an update with Windows 6.5.3 and Office 2010. I am a fan and contributor from your LG Incite ROMs. Thanks! Rick

rparanson said:
Thank you for cooking the LG Expo base rom for flashing. Included MS Office is not 2010 and no threaded email. Included Windows is 6.5. 5.2.2174. Looking forward to an update with Windows 6.5.3 and Office 2010. I am a fan and contributor from your LG Incite ROMs. Thanks! Rick
Click to expand...
Click to collapse
You are very welcome. I've had some 6.5.3 roms out. Here is the link:
http://forum.xda-developers.com/showthread.php?t=666982

I tried to flash with the eXpo ROM, I followed the intructions, but it didn't work and I can't download the IQ flasher because of the death of download link.
Can you please reupload it?
Thanks

ilyasovich said:
I tried to flash with the eXpo ROM, I followed the intructions, but it didn't work and I can't download the IQ flasher because of the death of download link.
Can you please reupload it?
Thanks
Click to expand...
Click to collapse
As I saw in oneof your other posts you are using a GM750. This isn't even the same phone as the eXpo or IQ. You're not going to be able to flash one of these roms to your phone. There are hardware differences and software differences that prevent this.

Dark9781 said:
As I saw in oneof your other posts you are using a GM750. This isn't even the same phone as the eXpo or IQ. You're not going to be able to flash one of these roms to your phone. There are hardware differences and software differences that prevent this.
Click to expand...
Click to collapse
That means that It's impossible to flash the GM750?

ilyasovich said:
That means that It's impossible to flash the GM750?
Click to expand...
Click to collapse
It's not impossible to flash the GM750. You need a rom that was made for that phone.

Dark9781 said:
It's not impossible to flash the GM750. You need a rom that was made for that phone.
Click to expand...
Click to collapse
Yesterday I used the Layla rom found here
(www) handy-faq.de/forum/lg_gm750_layla_forum/97996-lg_gm750_layla_firmware_download.html
But i had a very big problem , when upgrading process was in 45% i had a BSoD (Blue Screen of death) and my computer restarted, and the phone is now OUT OF SERVICE, i can't run it in emergency download mode
I think that this phone was dead

ilyasovich said:
Yesterday I used the Layla rom found here
(www) handy-faq.de/forum/lg_gm750_layla_forum/97996-lg_gm750_layla_firmware_download.html
But i had a very big problem , when upgrading process was in 45% i had a BSoD (Blue Screen of death) and my computer restarted, and the phone is now OUT OF SERVICE, i can't run it in emergency download mode
I think that this phone was dead
Click to expand...
Click to collapse
When that happens it should still go into emergency download mode even though the screen might not say it. Try it again and run the update.

Dark9781 said:
When that happens it should still go into emergency download mode even though the screen might not say it. Try it again and run the update.
Click to expand...
Click to collapse
Thanks a lot for your answer, I Tried it, but in vain there is no emergency download mode, i can't also charge the battery

help with flashing
I cannot complete the flasing process im using windows 7 an cannot get pass step 7 as windows is unable to install the drivers properly. Is there a way to manual install the drivers ? The phone will go to the emergency download screen and the comp just says "driver instalation was unsuccessful ". Looking in the device manager i can see the LG USB MODEM with the ! of a failed instal. Any help would be much appreciated.
reagards
Dean

Cpt Carrot said:
I cannot complete the flasing process im using windows 7 an cannot get pass step 7 as windows is unable to install the drivers properly. Is there a way to manual install the drivers ? The phone will go to the emergency download screen and the comp just says "driver instalation was unsuccessful ". Looking in the device manager i can see the LG USB MODEM with the ! of a failed instal. Any help would be much appreciated.
reagards
Dean
Click to expand...
Click to collapse
The drivers do have their own installer, you should be able to find it in one of the sub folders of c:\users\all users\lgmobileax

thx xdapants i did find the drivers but this did not fix the issue. It seems to be a connection problem with phone and comp (a common problem it would seem) do i`ve orderd and am still waiting for a new cable and hope this is the simple fix im looking for. However, if like i suspect this still does not work can i flash from memory card ? i think this was possible with the htc kaiser (best phone ever) or if not can i flash over a bluetooth connection ?

Cpt Carrot said:
thx xdapants i did find the drivers but this did not fix the issue. It seems to be a connection problem with phone and comp (a common problem it would seem) do i`ve orderd and am still waiting for a new cable and hope this is the simple fix im looking for. However, if like i suspect this still does not work can i flash from memory card ? i think this was possible with the htc kaiser (best phone ever) or if not can i flash over a bluetooth connection ?
Click to expand...
Click to collapse
I don't believe it's possible to flash an lg phone from the memory card, at least not at this point. And as the phone needs to be in download mode, flashing over BT wouldn't be possible.
Consider trying a different USB port; ideally on the opposite side of the computer if you haven't already.
Hopefully the replacement cable will work for you. It seems to be the phone doesn't like being used as a storage device, but that shouldn't really have any bearing the download mode connection.

Im trying to flash my IQ to the latest Dragonstorm ROM and got a error with a load of Chinese characters and something about a server error. Did i miss anything? I got it to see my device and it was put into emergency download no probs. I just a bit reluctant to not wanting to brick my phone

did you extract to the correct location?

[Q] USB Device Not Recognized

Good day,
I'm having problem with my DHD unable to be recognized in my Win 7 PC. I have already install HTC Sync and also tick on "Ask Me" for Connect To PC setting. I'm running on stock 3.13.707.4 ROM with S-ON and unrooted. Even restart to Fastboot my PC still unable to recognized my DHD.
From Googling it shows many Desire having USB-Brick problem, does this problem also applied to DHD? Is it my phone is hit by USB-Brick? Any guide to solve this problem? I've tried flashing older ROM via Bootloader and PD98IMG.zip but it won't allow saying something like the ROM is older version.
I just bought this used phone for about a week so I'm still not sure on how to solved this problem. any helps is much appreciated.

are you using the original cord that came with the phone? just any old usb cable won't work
also you can't flash a new rom without rooting and gaining S-OFF, you're unrooted and S-ON, that's why you get the "version is older" message

maatsby said:
are you using the original cord that came with the phone? just any old usb cable won't work
also you can't flash a new rom without rooting and gaining S-OFF, you're unrooted and S-ON, that's why you get the "version is older" message
Click to expand...
Click to collapse
I bought the phone and it came with 1 cord (with HTC label) that can be connected to the charger, I guess there are only 1 cord for charging and connect to PC? This is the cord that I use. In addition to that I have also tried Motorola, Sony Ericsson (both also for Android phone) and Nokia cord but all can't.
The ROM is actually older version stock ROM from RUU.exe. I saw from few Desire thread they were using this method to restore the ROM to before the USB Brick condition so I thought to try it.

BUMP!
Anyone know what should I do to resolve this problem?

Are you running the very latest HTC Sync on your PC? I'm using 3.0.5606. You can get it here: http://www.htc.com/www/help/
Also, connect your phone and go into Device Manager on your PC. Check to see if you have an entry for Android USB Devices and that the phone shows up. See attached screenshot for how mine looks. This is the best place to check to see if your PC has installed the drivers correctly.
In answer to your question about the cable, yes it's the same cable that attaches to the PC or to the mains charger. I've sometimes had connection problems caused by a dodgy cable, but I've used others apart from the HTC one without issues.
Edit: Also, when you install HTC Sync it should warn you to disable Antivirus software during the installation. This can be really important! I ignored it the first time around, thinking it was just a silly precaution, and had loads of problems with the phone not being recognised. Had to uninstall, temporarily disable AV, and re-install HTC Sync. Once it has finished installing, you can turn your AV back on.

Thank you for your reply preacher6.
Yes, I'm using the latest HTC Sync, v3.0.5606, just downloaded yesterday and reinstall everything.
When my phone connected to the PC it didn't appear as Android USB Device on my Device Manager, it only appear as Unknown Device in USB Controller:
So I guess I can rule out the cable as I have tried about 4 cables already.
For the installation part, I have disable the anti virus and also running the setup program as administrator. When installing there is no problem whatsoever that crop out.
Another point is, even on Fastboot it appear as Unknown Device in the PC.

I would try to update the driver manually - right click on the Unknown device, go to "install driver" or "update driver", then browse to the "Program Files\HTC\HTC Driver" folder. See if it picks up and installs the correct driver.

I've tried manually update the driver as per your advise but it says there is no compatible driver in that folder even though androidusb.inf is in that folder.
I'm running Win 7 64bit. does the driver also work for 64bit OS?

Should do, yes, I'm on Win7 64 bit myself. There is this folder on my PC:
C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64
Is the unknown device present when the phone isn't connected? Just to make sure that is actually the phone - if it's still there when the phone isn't connected, it's some other device.
Otherwise try uninstalling the unknown device and then rebooting the PC, then forcing the installation of the drivers again.

The folder is same as yours.
The unknown device does not present when my DHD is not connected, so I'm certain it is the phone that appear as unknown device.
I have tried uninstalling the unknown device > reboot PC > installing the driver but it still won't install.
Another thing is, I check on the Device Manager > Unknown Device properties > Details" for it's Hardware Ids and it shows as USB\UNKNOWN. I think it should show a strings of the device id? Correct me if I'm wrong.

Yep, there should be a proper device ID string, on charge mode mine shows a hardware ID of USB\VID_0BB4&PID_0CA2&REV_0226&MI_01.
At this point the best thing I can suggest is to try on another PC. If it works, your drivers are screwed up and you'll need to strip them and reinstall. But if it doesn't work on another PC, it's possible you have a hardware problem with the phone.

xb360 said:
Good day,
I'm having problem with my DHD unable to be recognized in my Win 7 PC. I have already install HTC Sync and also tick on "Ask Me" for Connect To PC setting. I'm running on stock 3.13.707.4 ROM with S-ON and unrooted. Even restart to Fastboot my PC still unable to recognized my DHD.
From Googling it shows many Desire having USB-Brick problem, does this problem also applied to DHD? Is it my phone is hit by USB-Brick? Any guide to solve this problem? I've tried flashing older ROM via Bootloader and PD98IMG.zip but it won't allow saying something like the ROM is older version.
I just bought this used phone for about a week so I'm still not sure on how to solved this problem. any helps is much appreciated.
Click to expand...
Click to collapse
Hi. This thread is pretty old but I'm wondering if you ever resolved the issue? I'm having exactly the same problem with my HTC One s and I can't seem to find a solution anywhere.
THanks

dmastman83 said:
Hi. This thread is pretty old but I'm wondering if you ever resolved the issue? I'm having exactly the same problem with my HTC One s and I can't seem to find a solution anywhere.
THanks
Click to expand...
Click to collapse
Yes. Holla if you still need help

marknoll said:
Yes. Holla if you still need help
Click to expand...
Click to collapse
I need help too (HTC Desire Z device)
Is it hardware problem? (I already purchased new system board).
For me it looks like hardware problem, because device does not accept bus address, do not show USB strings/VID/PID (Tried different cables/PCs/OSes (I have OpenSUSE linux, but phone does not connect to usb on any PC, Windows PCs even do not understand that something plugged in)).
No problems with USB-connector (checked resistance), but I do not see pull-down resistance with my tester.
But all other functions work well.
UPD. Tried to connect from FASBOOT/HBOOT/Android - the same result, device does not accept bus adress. Additionally it charges without problems, but when I connect phone to USB no pop-up/information at top bar appears.

FossaFX said:
I need help too (HTC Desire Z device)
Is it hardware problem? (I already purchased new system board).
For me it looks like hardware problem, because device does not accept bus address, do not show USB strings/VID/PID (Tried different cables/PCs/OSes (I have OpenSUSE linux, but phone does not connect to usb on any PC, Windows PCs even do not understand that something plugged in)).
No problems with USB-connector (checked resistance), but I do not see pull-down resistance with my tester.
But all other functions work well.
UPD. Tried to connect from FASBOOT/HBOOT/Android - the same result, device does not accept bus adress. Additionally it charges without problems, but when I connect phone to USB no pop-up/information at top bar appears.
Click to expand...
Click to collapse
I am trying to understand what exactly are you asking me . are you asking me if the PC can recognize your device ?

marknoll said:
I am trying to understand what exactly are you asking me . are you asking me if the PC can recognize your device ?
Click to expand...
Click to collapse
Sorry, it looks like I explained my question wrong (I'm Russian, and English do not native to me). Let me try reformulate:
You said "Yes. Holla if you still need help" so I believe that you were able to fix "Device not recognized" problem. So I'm asking - how did you do it? Did problem was hardware or software?
For me (look at symptoms at my previous message) it looks like dead USB controller in phone. But maybe it very strange software problem (USB-controller firmware damaged)?
Did I explain it clear now?

Install the SDK on PC and update all android versions.

Well guys it was just my PC, i made a system backup for four days and that was all the problem(the USB port of my PC)

FossaFX said:
Sorry, it looks like I explained my question wrong (I'm Russian, and English do not native to me). Let me try reformulate:
You said "Yes. Holla if you still need help" so I believe that you were able to fix "Device not recognized" problem. So I'm asking - how did you do it? Did problem was hardware or software?
For me (look at symptoms at my previous message) it looks like dead USB controller in phone. But maybe it very strange software problem (USB-controller firmware damaged)?
Did I explain it clear now?
Click to expand...
Click to collapse
After installing and updating SDK...go into platform folder and open it. Hold mouse in field and hold shift and right click mouse. Chose "open cmd here"..that will open a cmd prompt window. In regular mode on phone,type "adb devices" should return numbers (ex: hta3829g)..if in bootloader mode,type "fastboot devices" should return numbers.
This SDK helps PC see your phone when its plugged in. Especially handy when a PC won't install drivers for your phone
Sent from my ATRIX HD

Are you also stating that your device will no longer charge when plugged in?
Sent from my ATRIX HD