Related
Hello
I am new to this site and was hoping someone could give me a some assistance. I recently used Mirage 1.8 to update my i780 to WM6.1. the eboot and the PDA installed just fine but I can not for the life of me get the phone and phone boot loader update to install. I am using the i780 Phone Upgrade ROM DXHH1 file, found it on this site. After I click detect and then power up the phone I hear the connection sound on the computer that the device is recognized and then the Mirage software starts its thin. Then I hear the disconnect sound and then Mirage goes through the Kw.kim retry steps. And the phone shuts down.
I have tried the modem drivers but I seem to be having a problem with them. I downloaded and installed this file "Samsung_CDMA_modem_4.34". When I connect the Phone it shows that it found the i780 USB device but then it begins to install Samsung Mit's USB Device and then it fails to install the device properly...so it does not complete the installation properly. How do I go about installing the driver properly? I do not see it on the list of devices in system manager, where can I manually update the driver and were do I find the file once the software is installed. Or do I need to try something else?
So I just tried a WM6 Eng rom and it all installs fine but just like the WM6.1 I can not get the phone to turn on in the wireless manager. What do I need to do to get the phone to turn on?
Thank you.
DXHH1 is meant for Asian version of i780, what's yours? for which country?
And can you please tell us if you are using XP SP2 or 3 and not Vista because flashing in Vista with Mirage Updater will NEVER work even if you have the right driver.
Try this. Uninstall the Samsung drivers frist and then reinstall it after reboot.
Then instead of using a separate DXHH1 Phone only image, download a full Russian PUHE1 IMG file (you can search for this easily in this forum) and flash everything (eBoot+Phone+PDA). If you can flash the Russian IMG successfully, you will be able to boot up your i780 in Russian langauage and only after that you can try DXHH1 IMG (I mean the full IMG rom and not individual files)
Good luck
EFN said:
DXHH1 is meant for Asian version of i780, what's yours? for which country?
And can you please tell us if you are using XP SP2 or 3 and not Vista because flashing in Vista with Mirage Updater will NEVER work even if you have the right driver.
Try this. Uninstall the Samsung drivers frist and then reinstall it after reboot.
Then instead of using a separate DXHH1 Phone only image, download a full Russian PUHE1 IMG file (you can search for this easily in this forum) and flash everything (eBoot+Phone+PDA). If you can flash the Russian IMG successfully, you will be able to boot up your i780 in Russian langauage and only after that you can try DXHH1 IMG (I mean the full IMG rom and not individual files)
Good luck
Click to expand...
Click to collapse
You can flash using VMWARE (trial available) and install WinXP inside the virtual machine.. that's how I flashed your V4
disable USB connection in activesync...
People, here is a link to the Samsung modem driver:
http://fus.samsungmobile.com/i600/Samsung_CDMA_modem_4.34.zip
Thanks for the replys.
My i780 is from France and it had the French ROM but not any longer because I forgot to back it up.
I have XP SP3 on my computer.
I have uninstalled the drivers as well as activesync. Restarted computer. Then installed the drivers suggested by Mochan above. Then installed activesync.
Connected the i780...all of the drivers were installed properly (Samsung MITs device found and installed and i780)
Opened activesync on computer and unchecked "allow usb connections".
Reconnected the device and powered it up and the computer found new device and installed "Samsung Mits".
I downloaded both the Russian and the Italian full Rom updates.
Opened Mirage v1.8 and selected first the russian Rom for edoot+pda+Phone selected detect.
Plugged in phone to usb and all of the steps worked up till the phone image. It says on the phone "phone image downloading" and on the computer it shows "switching usb to phone" and "Downloading phone".
Then for some reason the phone shuts down automatically and stays powered off.
Then Mirage brings up the message "Attempting to open com 0..." KW.KIM Create Retry (25) etc...Finally Download failed.
I have tried this with the Russian, Italian and English ROMs available. I have tried it with the following settings on the phone on and off:
- Emercency mode
- Regular restart of phone
- Reset phone by holding Red Green and Power button together.
- Removed the battery completely and restarted.
- Restarted with Sim installed and with sim removed.
- Settings/Connections/USB connection mode switched from Activesync to Mass storage and then switched back to Activesync.
- Settings/System/USB to PC "Enable advanced network functionality" selected and then deselected.
What am I missing?
Why does the phone shut down during the Phone.bin file download and not complete the downlad and install? Is there some setting that I am missing or a com port that I need to establish so they will communicate properly.
Everything seems to work on the phone even without the phone.bin file installed. The problem is that when I try to connect to wireless manager and enable the phone nothing happens and it does not register the sim card. Also In the Settings/Connection/USB connection mode I only have listed Activesync and Mass Storage. There is no listing for modem (I noticed in one of the other posts that they had the option to select modem). Is there something I need to do to enable this option.
Sorry for the long rant but wanted to make sure everyone had all of the info.
Thanks
my brother had a similar problem with his i780 - the phone refused to be recognised when flashing the phone.bin, the pda and eboot flashed perfectly no problem. We realised it was a problem specifically with the device as my i780 flashed all three parts fine.
In the end he got the device replaced which flashed fine!! Maybe there are a few dodgy phones out there! My advice would be to try and find a French rom and flash your device with that. Hopefully the rom will be compatible with the phone part of your phone!
Just downloaded the French rom from an xda thread. It would not load up under the eboot+PDA+Phone option but it did load under the PDA option in Mirage. Still can not turn on the phone under wireless options on the i780.
The phone/radio worked fine with the original rom. Once I did the first rom update to switch from french to english only using the pda update I lost the phone/radio functionality. So I dont think it is a hardware issue rather a software issue. For some reason it is not making the connection. I just dont know what it is. Could it be something with mirage? Why would the phone shutdown during the software install?
so looks to me that the problem is with the phones modem set up. I do not have it listed as an option for usb connectivity. Is there a reg edit or some other steps I should take in order to get the phone to set up the usb modem?
Thank you.
I still have had no success with my problem, has anyone come across any info about an official i780 update? Or does anyone know what I can do to get around my proble to install the phone rom? Thank you.
I have the same problem with apetrovic. I have used with phone off, which is a big pain. Just like a PDA with no phone. This is all happened after flash Russian image. The original rom was German. my i780 simply turns off after downloading and ends up with no port created.
Any clue, please.
I have downloaded your suggested driver, run the setup, restarted the computer and connected the i780 in Emergency mode with activesync disabled and the Computer keeps installing Samsung MITs Drivers and not the CDMA Drivers you supplied. I used the Add Hardware wizaer, interrupted the install process when the i780 is first connected and even tried the update driver option and I can not install the CDMA driver I always get the error that "The specified location does not contain information about your hardware." How do I get the CDMA drivers you provided installed and not the MITs?
Thank you
apetrovic said:
I have downloaded your suggested driver, run the setup, restarted the computer and connected the i780 in Emergency mode with activesync disabled and the Computer keeps installing Samsung MITs Drivers and not the CDMA Drivers you supplied. I used the Add Hardware wizaer, interrupted the install process when the i780 is first connected and even tried the update driver option and I can not install the CDMA driver I always get the error that "The specified location does not contain information about your hardware." How do I get the CDMA drivers you provided installed and not the MITs?
Thank you
Click to expand...
Click to collapse
Yes, I have also tried to intervene the installation of the MITs driver to install the CDMA driver, and Windows XP sp3 says "The specified location does not contain information about your hardware." So, I could not install the CDMA driver.
I do not know how to get rid of the MITs driver completely, so that Windows XP does not even recommend this driver when I install the CDMA driver. Windows always complain the MITs driver is not signed.
I wonder if those who have successfully installed the CDMA driver also see the MITs driver in the device manager when i780 is connected to PC under the emergency mode. This looks important for the moment for you and I in resolving the issue.
Anyone who can tell us what driver is on when i780 is connected to PC under the emergency mode? Thanks in advance.
I think the problem for us is that we have lost the modem option on the i780 under settings-usb connection mode. Since we do not have the option the computer will not download the drivers. The drivers that are downloaded are prob ok because they are intended for USB sync but when you go to the device manager there is no i780 modem installed under modems...so my theory is that the computer is not installing the modem driver because it is not finding a modem on the phone. So we need to somehow get the modem option installed and available on the phone and then the computer will install the drivers and then we can properly install the wm 6.1 phone update. please let me know if you find anything out.
apetrovic said:
I think the problem for us is that we have lost the modem option on the i780 under settings-usb connection mode. Since we do not have the option the computer will not download the drivers. The drivers that are downloaded are prob ok because they are intended for USB sync but when you go to the device manager there is no i780 modem installed under modems...so my theory is that the computer is not installing the modem driver because it is not finding a modem on the phone. So we need to somehow get the modem option installed and available on the phone and then the computer will install the drivers and then we can properly install the wm 6.1 phone update. please let me know if you find anything out.
Click to expand...
Click to collapse
That's an interesting theory noticing the messages in the mirage loader.
"Switching USB to PHONE..." and then
"PHONE-Switching USB to PHONE...
PHONE-Automatic driver detection failed..
PHONE-Attempting to open COM 0...
PHONE-Port Create failed...: COM 0"
These clearly look related to the modem meaning we should be able to see the device under modem in the device manager of Windows XP.
In fact, my i780 got the phone rom flashed just for once successfully when I flashed the russian image (eboot, pda, and phone, altogether). I don't know what mysterious thing happened here, and then I have never succeeded back again in flashing the phone rom since then. My phone used to work no problem before this. I just wanted to have windows mobile 6.1, and now I know I should have clicked "PDA" in the mirage loader instead of "EBOOT+PDA+PHONE".
Well this is becoming more and more difficult!! I contacted US Samsung support to reflash my i780 and they can not do it becuse the phone is not sold in the US and then I contacted Samsung France and they cant flash it because they can not ship it back to the US. I need to have an address in France for them to ship it to. So now stuck with a phone that only has PDA functions.
If there is someone out there who can help me I would appreciate it. The problem is that I used the Roms available on this site to upgrade to WM6.1 and I lost my phone/radio function. Now my phone is stuck in flight mode. I was able to install the eboot and the pda bu the phone portion will not install. I followed the directions and installed just the PDA portion initially and it killed my modem/phone/radio function. Before the phone worked and modem was listed as an option under settings usb connection mode...now it is not.
I have tried to install a French ROM (because it was purchased in france)and that did nothing.
So if there is anyone out there that can help guide me in installing a functioning rom WM6 or 6.1 I would greatly appreciate it.
apetrovic said:
Well this is becoming more and more difficult!! I contacted US Samsung support to reflash my i780 and they can not do it becuse the phone is not sold in the US and then I contacted Samsung France and they cant flash it because they can not ship it back to the US. I need to have an address in France for them to ship it to. So now stuck with a phone that only has PDA functions.
If there is someone out there who can help me I would appreciate it. The problem is that I used the Roms available on this site to upgrade to WM6.1 and I lost my phone/radio function. Now my phone is stuck in flight mode. I was able to install the eboot and the pda bu the phone portion will not install. I followed the directions and installed just the PDA portion initially and it killed my modem/phone/radio function. Before the phone worked and modem was listed as an option under settings usb connection mode...now it is not.
I have tried to install a French ROM (because it was purchased in france)and that did nothing.
So if there is anyone out there that can help guide me in installing a functioning rom WM6 or 6.1 I would greatly appreciate it.
Click to expand...
Click to collapse
I didn't know that you are in the states causing the problems. Too bad. I have two questions for you to clarify the problem.
Before the phone worked and modem was listed as an option under settings usb connection mode
Does this mean you could see the third option called "phone" in USB connection mode in i780? Currently there are only two modes, which is ActiveSync and Mass storage.
I was able to install the eboot and the pda bu the phone portion will not install. I followed the directions and installed just the PDA portion initially and it killed my modem/phone/radio function
Does this mean that upgrading only PDA may brick our i780 not necessarily with eboot and phone? Because I keep thinking that, it may be eboot I updated from this site not turning on the modem in i780.
Sorry about your and my problem. Thank you for your feedback.
Does this mean you could see the third option called "phone" in USB connection mode in i780?
Yes there was a 3rd option but it was "Modem".
Does this mean that upgrading only PDA may brick our i780 not necessarily with eboot and phone?
When I first used the upgrade I used the i780 PDA portion only, as suggested.
apetrovic said:
Does this mean you could see the third option called "phone" in USB connection mode in i780?
Yes there was a 3rd option but it was "Modem".
Does this mean that upgrading only PDA may brick our i780 not necessarily with eboot and phone?
When I first used the upgrade I used the i780 PDA portion only, as suggested.
Click to expand...
Click to collapse
Sorry but I think that there is a bit of confusion.
During the normal use of the phone, you never see a modem in the device manager.
You can see the phone as lan card (used by activesyc), as a different lan card (when internet connection sharing is enabled), or as storage device (if you enable the related function in the control panel).
No modem.
During the flash process of the pda section the phone is still seen as a lan card.
ONLY when the phone sectin is flashed the phone switch to phone/modem mode.
Going to the problem you must launch the phone flash process and ceck what happen in the meantime in the device manager.
Is a question mark present ?
There is a unknown usb device ?
And if is the case what is the pid and the vid of the device ?
The Solutor said:
Sorry but I think that there is a bit of confusion.
During the normal use of the phone, you never see a modem in the device manager.
You can see the phone as lan card (used by activesyc), as a different lan card (when internet connection sharing is enabled), or as storage device (if you enable the related function in the control panel).
No modem.
During the flash process of the pda section the phone is still seen as a lan card.
ONLY when the phone sectin is flashed the phone switch to phone/modem mode.
Going to the problem you must launch the phone flash process and ceck what happen in the meantime in the device manager.
Is a question mark present ?
There is a unknown usb device ?
And if is the case what is the pid and the vid of the device ?
Click to expand...
Click to collapse
I stumbled upon a website that had an image that showed a modem in both the device manager and the usb connection mode areas...I have looked for it to post the image but I dont know where to find it again...starting to get lost from all of the info I have come across trying to fix my phone...getting confusing now.
Anyway, here is what happens in device manager when I do the following:
-Activesync disabled - i780 in emergency mode - Samsung MIT's USB Device listed under Windows CE USB Devices
-Activesync disabled - i780 normal - 1st before WM6.1 is running it shows Samsung MIT's USB Device listed under Windows CE USB Devices. Then that goes away and windows mobile based device shows up under network adapters.
- Activesync enabled - i780 emergency - Found new hardware installs without error...look in device manager and there is a yellow exclamation point next to Samsung MIT's USB Device under Windows CE USB Devices.
- Activesync Enabled - i780 normal - 1st before WM6.1 is running it shows Samsung MIT's USB Device listed under Windows CE USB Devices. Then that goes away and windows mobile based device shows up under network adapters.
Now during all of the above steps there is never an unknown USB device listed. Also I tried using mirage with these same above settings and each time I get the notification that usb device not recognized and then the phone suts down and I get the KVM com port messages, and it fails to install the phone rom.
I would like to provide you with the pid and vid but I don't know what pid and vid stand for. please let me know and I will get it for you.
Thanks for the help.
WARNING: DO NOT USE WINDOWS VISTA TO FLASH YOUR PHONE. THERE IS A COMMUNICATION ISSUE WITH VISTA AND THE FLASHER. LG DECIDED NOT TO FIX THIS ISSUE. ONLY FLASH YOUR PHONE USING WINDOWS XP AND WINDOWS 7.
Windows XP
1. Get the eXpo or IQ flasher (depending on which phone you have). Here is the link:
http://forum.xda-developers.com/showthread.php?t=647900
2. Run the flasher installer.
3. Set the install directory to "C:\Documents and Settings\All Users\Application Data" if it isn't set to that already.
4. Click install
5. Plug the usb cable into your computer.
6. Power off your eXpo/IQ. Once it is powered off slide open the keyboard and hold the space bar while plugging the usb cable into your phone's micro usb port. Emergency download mode should appear on the screen.
7. Wait a couple of seconds to allow your phone and computer to communicate with each other and then press start update on the flasher program.
Note: If you get the message "Cannot detect smartphone. Please check connection." click ok and click install usb drivers. Once the drivers are installed click start update again. You may have to restart the computer for the drivers to take effect.
8. You will then see a screen that says the rom version and "Do you want to update." Click ok. The program will start to update your phone.
Windows 7
1. Get the eXpo or IQ flasher (depending on which phone you have). Here is the link:
http://forum.xda-developers.com/showthread.php?t=647900
2. Right click the flasher installer and click properties. Now navigate to the Compatibility tab, check Run this program in compatibility mode for, and choose Windows XP (Service Pack 3). Also check run this program as an administrator in the privilege level setting in the compatibility mode tab. Click ok to save. Now run the flasher installer.
3. Set the install directory to "C:\Users\All Users" if it isn't set to that already.
4. Click install
5. Plug the usb cable into your computer.
6. Power off your eXpo/IQ. Once it is powered off slide open the keyboard and hold the space bar while plugging the usb cable into your phone's micro usb port. Emergency download mode should appear on the screen.
7. Wait a couple of seconds to allow your phone and computer to communicate with each other and then press start update on the flasher program.
Note: If you get the message "Cannot detect smartphone. Please check connection." click ok and click install usb drivers. Once the drivers are installed click start update again. You may have to restart the computer for the drivers to take effect.
8. You will then see a screen that says the rom version and "Do you want to update." Click ok. The program will start to update your phone.
Latest version?
Thank you for cooking the LG Expo base rom for flashing. Included MS Office is not 2010 and no threaded email. Included Windows is 6.5. 5.2.2174. Looking forward to an update with Windows 6.5.3 and Office 2010. I am a fan and contributor from your LG Incite ROMs. Thanks! Rick
rparanson said:
Thank you for cooking the LG Expo base rom for flashing. Included MS Office is not 2010 and no threaded email. Included Windows is 6.5. 5.2.2174. Looking forward to an update with Windows 6.5.3 and Office 2010. I am a fan and contributor from your LG Incite ROMs. Thanks! Rick
Click to expand...
Click to collapse
You are very welcome. I've had some 6.5.3 roms out. Here is the link:
http://forum.xda-developers.com/showthread.php?t=666982
I tried to flash with the eXpo ROM, I followed the intructions, but it didn't work and I can't download the IQ flasher because of the death of download link.
Can you please reupload it?
Thanks
ilyasovich said:
I tried to flash with the eXpo ROM, I followed the intructions, but it didn't work and I can't download the IQ flasher because of the death of download link.
Can you please reupload it?
Thanks
Click to expand...
Click to collapse
As I saw in oneof your other posts you are using a GM750. This isn't even the same phone as the eXpo or IQ. You're not going to be able to flash one of these roms to your phone. There are hardware differences and software differences that prevent this.
Dark9781 said:
As I saw in oneof your other posts you are using a GM750. This isn't even the same phone as the eXpo or IQ. You're not going to be able to flash one of these roms to your phone. There are hardware differences and software differences that prevent this.
Click to expand...
Click to collapse
That means that It's impossible to flash the GM750?
ilyasovich said:
That means that It's impossible to flash the GM750?
Click to expand...
Click to collapse
It's not impossible to flash the GM750. You need a rom that was made for that phone.
Dark9781 said:
It's not impossible to flash the GM750. You need a rom that was made for that phone.
Click to expand...
Click to collapse
Yesterday I used the Layla rom found here
(www) handy-faq.de/forum/lg_gm750_layla_forum/97996-lg_gm750_layla_firmware_download.html
But i had a very big problem , when upgrading process was in 45% i had a BSoD (Blue Screen of death) and my computer restarted, and the phone is now OUT OF SERVICE, i can't run it in emergency download mode
I think that this phone was dead
ilyasovich said:
Yesterday I used the Layla rom found here
(www) handy-faq.de/forum/lg_gm750_layla_forum/97996-lg_gm750_layla_firmware_download.html
But i had a very big problem , when upgrading process was in 45% i had a BSoD (Blue Screen of death) and my computer restarted, and the phone is now OUT OF SERVICE, i can't run it in emergency download mode
I think that this phone was dead
Click to expand...
Click to collapse
When that happens it should still go into emergency download mode even though the screen might not say it. Try it again and run the update.
Dark9781 said:
When that happens it should still go into emergency download mode even though the screen might not say it. Try it again and run the update.
Click to expand...
Click to collapse
Thanks a lot for your answer, I Tried it, but in vain there is no emergency download mode, i can't also charge the battery
help with flashing
I cannot complete the flasing process im using windows 7 an cannot get pass step 7 as windows is unable to install the drivers properly. Is there a way to manual install the drivers ? The phone will go to the emergency download screen and the comp just says "driver instalation was unsuccessful ". Looking in the device manager i can see the LG USB MODEM with the ! of a failed instal. Any help would be much appreciated.
reagards
Dean
Cpt Carrot said:
I cannot complete the flasing process im using windows 7 an cannot get pass step 7 as windows is unable to install the drivers properly. Is there a way to manual install the drivers ? The phone will go to the emergency download screen and the comp just says "driver instalation was unsuccessful ". Looking in the device manager i can see the LG USB MODEM with the ! of a failed instal. Any help would be much appreciated.
reagards
Dean
Click to expand...
Click to collapse
The drivers do have their own installer, you should be able to find it in one of the sub folders of c:\users\all users\lgmobileax
thx xdapants i did find the drivers but this did not fix the issue. It seems to be a connection problem with phone and comp (a common problem it would seem) do i`ve orderd and am still waiting for a new cable and hope this is the simple fix im looking for. However, if like i suspect this still does not work can i flash from memory card ? i think this was possible with the htc kaiser (best phone ever) or if not can i flash over a bluetooth connection ?
Cpt Carrot said:
thx xdapants i did find the drivers but this did not fix the issue. It seems to be a connection problem with phone and comp (a common problem it would seem) do i`ve orderd and am still waiting for a new cable and hope this is the simple fix im looking for. However, if like i suspect this still does not work can i flash from memory card ? i think this was possible with the htc kaiser (best phone ever) or if not can i flash over a bluetooth connection ?
Click to expand...
Click to collapse
I don't believe it's possible to flash an lg phone from the memory card, at least not at this point. And as the phone needs to be in download mode, flashing over BT wouldn't be possible.
Consider trying a different USB port; ideally on the opposite side of the computer if you haven't already.
Hopefully the replacement cable will work for you. It seems to be the phone doesn't like being used as a storage device, but that shouldn't really have any bearing the download mode connection.
Im trying to flash my IQ to the latest Dragonstorm ROM and got a error with a load of Chinese characters and something about a server error. Did i miss anything? I got it to see my device and it was put into emergency download no probs. I just a bit reluctant to not wanting to brick my phone
did you extract to the correct location?
Hi Guys,
Any help would be great! i do have google talk if anyone is willing to help me out!
My R800i Is rooted and has a version of recovery but not sure which version, i am wanting to update my phone with a better kernel and rom since the current one i have installed is giving me issues ( not being able to receive incoming calls for example )
Another problem is i reformatted the phone since i was having issues with receiving calls but now when i connect my phone to ANY computer via the USB cable the computer trys to install MTP or MSC driver ( depends on which connection type i select ) the Installer fails and i cant even take any files off my phone.
Provided details below. i want to somehow get into the current bootloader and install the ROM thats on my SD card! i do have flashtool installed and Android tool SDK installed but still no success in phone wanting to talk to my laptop.
I am running windows 7 64 bit. i am starting to think the phone is belond repair since i cant get any software to work between the phone and computer.
does anyone know what buttons i need to push on the Xperia Play to enter into the boot loader, i have tried pressing the back button and search button on phone boot but nothing happens apart from the phone starts up normally.
would a factory reset delete the boot loader and other config-ed software off the phone is this why i cant enter the boot loader or am i not pressing the right buttons on boot.
Any help would be really appreciated!
IMEI:
357302043579712
IMEI Software Verson
49
Available Speech Codecs
HR, FR, EFR, AMR_HR, AMR_FR
Working Bands
GSM850, GSM900, GSM1800, GSM1900, UMTS_BC1, UMTS_BC8
Rooting Status Bootloader Unlocked Allowed: Yes
Phone Software Version
1245-8821_4.0.1.A.0.283
S1 Boot Version
1241-3656 R9A021
EST Software Version
1242.5099_10
Android Version
2.3.4
Baseband Version
8x55A-AAABQMAZM-203028A-49
Kernel Version
2.6.32.9-perf
Build Number
4.0.1.A.0.283
If you want to change the kernel you must unlock your bootloader. If your Xperia Play is a SIM free one, you can do it for free in this link: http://unlockbootloader.sonymobile.com
For SIM locked devices I think you must find another ways to do it. There are some online sites that unlock bootloader to SIM locked devices for a fee.
Once you have unlocked your bootloader, turn off the phone, hold on the search button, plug the USB cable in the computer, release the search button (power button LED will be blue) and install this driver: http://drivers.softpedia.com/progDownload/Google-USB-Driver-Revision4-Download-139077.html
Now you are ready to flash any kernel you want with Flashtool or any other app.
Thanks for the information, i have already done this, i payed £25 for a guy on this forum to unlock my phone to any network. i'll give this a try and get back to you, problem is the phone doesn't like to talk to my laptop via USB cable keeps on failing to install the drivers..
Thanks for quick response.
PsychoShaft said:
Thanks for the information, i have already done this, i payed £25 for a guy on this forum to unlock my phone to any network. i'll give this a try and get back to you, problem is the phone doesn't like to talk to my laptop via USB cable keeps on failing to install the drivers..
Thanks for quick response.
Click to expand...
Click to collapse
I have tried what you said but having problems with connecting my phone to my Windows 7 Laptop!
Check your device manager. The fastest way to open it is running this command: devmgmt.msc
There must be some kind of Android device while your phone is connected in fastboot mode. If you see it, update its driver with the Google USB driver v4 pointing at the folder path with the uncompressed files.
jcarbox said:
Check your device manager. The fastest way to open it is running this command: devmgmt.msc
There must be some kind of Android device while your phone is connected in fastboot mode. If you see it, update its driver with the Google USB driver v4 pointing at the folder path with the uncompressed files.
Click to expand...
Click to collapse
Hi I tried what you said, i Turned off my phone and holded the search button and turned it back on, the light went blue and the computer popped up trying to install fast boot i point to the SDK folder to update the driver but it fails.
do you have google talk might be easier on there to talk! cheers!
I'm not using gtalk atm. Sorry.
Be sure the driver you downloaded is named usb_driver_rev4.zip: http://drivers.softpedia.com/dyn-postdownload.php?p=139077&t=4&i=1
If Windows doesn't detects any driver in that uncompressed folder, you can choose to select the device from a list, point to that folder and force to install the driver. It's named something like Android ADB Interface.
jcarbox said:
I'm not using gtalk atm. Sorry.
Be sure the driver you downloaded is named usb_driver_rev4.zip: http://drivers.softpedia.com/dyn-postdownload.php?p=139077&t=4&i=1
If Windows doesn't detects any driver in that uncompressed folder, you can choose to select the device from a list, point to that folder and force to install the driver. It's named something like Android ADB Interface.
Click to expand...
Click to collapse
Thanks for the download link, i going to try this in a bit and get back to you! thanks for the support guys! :good:
Just tried, i put my phone into Media Transfer Mode.. my computer tried to install the MTP usb device and i directed the installation to the driver you linked..
Update Driver Software says: the best driver software for your device is already installed MTP USB DEVICE, there is a small yellow triangle on the icon and in MTP USB Device Properties it says: This device cannot start. (Code 10)
i need someone to Teamviewer with me, for the record i don't have the Sony Ericsson software installed on my Computer because that still wont install the drivers for my phone, i also know its not needed for installing new kernel and roms.
i tried connecting this phone to a bunch of pcs including my friends and it still fails to install any drivers!!! i think i am just going to bin this phone! i have had enough (
You must install that driver when you plug the phone in fastboot mode. It shouldn't work in any other case. In other words, when you plug your Xperia Play being powered on and Android is running it needs one driver, and when you boot it in fastboot mode you need other driver.
Please, install the driver following the steps previously posted with your phone in fastboot mode (blue LED).
Hello, i put my phone into fastboot mode, my device manager shows 1 device not installed S1Boot Fastboot, i right click go to properties and click update driver...
then i browse my computer for driver software i point the location to usb_driver_rev4\usb_driver and it says: Windows was unable to install your s1Boot fastboot!
Ok, let's see...
Try to update the driver using the "choose from a list" option to force the installation, point to the driver folder and select "Android ADB Interface" from the list. If Windows shows a warning message don't worry about it and go ahead.
i tryed this and its not wanting to work (
Sorry to hear that because I don't have any more ideas for your problem.
Maybe you may spend some minutes searching in the forum to find some detail that can help you.
i need someone with teamviewer to help me go though the setup process again, if anyone is willing to get my phone working i will happy pay them some money!
Thanks Jcarbox for all your support!
Regards
Paul
I just check the Windows device manager with my phone plugged in bootloader mode and it appears as Android Bootloader Interface, so this is the device you must choose from the list when you install the driver.
Hope this helps you.
thanks for the help, to bad my phone isnt having any of it.. just going to buy another phone (
This may work
PsychoShaft said:
thanks for the help, to bad my phone isnt having any of it.. just going to buy another phone (
Click to expand...
Click to collapse
hi PsychoShaft,
I had similar problems. I don't know how to fix it permanently. but i do this to make it work for some time.First, download flashtool and install it.Open your device manager and select view->show hidden drivers.Then, delete all your drivers related to xperia play. like the adb interface, semc flash ,etc. All of them in all categories. then reboot your computer into safe mode with administrator and connect your device with flashtool running in your windows in safe mode. then the flashtool will indicate that you don't have the drivers. then,open the drivers folder in flashtool and use the setup to install arc-play-...,flashmode drivers and fastboot mode drivers.then after the installation is over windows will ask you to reboot.now reboot with your mobile connected. after boot windows will automatically install the drivers. then unplug your phone and turn off it and connect in flash/fastboot mode.it will automatically install drivers.wait for windows to say drivers installed successfully or installation failed. don't unplug it in the middle of the process then you will have to start from first.sometimes it will not work in the first time ,then reboot into safe mode and try again installing the drivers and rebooting into safe mode itself and connecting your device.at one point of time flashtool will say your device is connected in flas/fastboot mode.then continue with flashing
Gladwin.
Thanks for the support guys i managed to solve the issue!
^^^^ Glad i could help
Sent from my GT-I9300
I have spent litterally all day trying to update my mrs g3 d855 and i have had no luck, how much of it because my computer i dont know. Im running a chromebook with a full linux distro gallumos installed, got virtual box running 32 bit windows 7. Android sdk, adb etc and got lg drivers installed to recognise the device in its various states, ptp, mtp, download. all that is working. got the official lg mobile support tool and the lg 2014 flash tool.
the problem im having is neither of these will update the phone, if i try to manaully flash the kdz using the flashtool or updating using the official one, it wont update recover either. if i try different region or enter the imei number it always fails at 4%. Iv tried different usb cables, different ports, the phone was at 100% battery the whole time, the laptop was on charge the whole time. I really dont know what else to do, i have no access to another windows machine here and its the mrs phone and she wouldnt want me to take it to work to try on another pc there. As i said earlier the drivers all seem installed correctly, the firmware downloads and extracts as it should but I really am at the point i dont know what else to try
Hello,
Did you try LGUP method? Link is here.
It's easy to use. All you need is there, try it and reply
Just TIP: Do you really have correct drivers for download mode? If LGUP see you device as "unknown", change your COM port to #41
Do "FULL WIPE AND INSTALL MM"
I think I might of, how ever before work I did download a version of lg up and some kind of other installer for it. I also got a kdz file to try and flash. The drivers should all be fine, it gets recognised in all the various modes. My fiance is on nights this week, the soonest il be able to try again is tomorrow so I will let you know it goes. Thank you for replying
The Gingerbread Man said:
I think I might of, how ever before work I did download a version of lg up and some kind of other installer for it. I also got a kdz file to try and flash. The drivers should all be fine, it gets recognised in all the various modes. My fiance is on nights this week, the soonest il be able to try again is tomorrow so I will let you know it goes. Thank you for replying
Click to expand...
Click to collapse
You can send me a PM, or just reply to this thread.
It's a common problem with various solutions. We will look at it.
halekhonza said:
You can send me a PM, or just reply to this thread.
It's a common problem with various solutions. We will look at it.
Click to expand...
Click to collapse
Thanks buddy il let you know after I can try it again. If it was a Nexus it would be fine, I know all about fastboot, unlocking bootloaders and rooting and stuff for the Nexus line. So much easier to work with
So I think I might know where I'm going wrong, i thought I had all the drivers set up but there's one I missed, for download mode
Under device manager I see when the phone is turned on with adb on
Android device- lge mobile adb interface-google Inc 4.0.0.0-working properly
Portable devices-g3-lg electronics 4.0.0.0-working properly
Ports (com & lot)-lg mobile USB serial port (com 4)-lg electronics 4.0.0.0-working properly
In download mode device manager
android device isn't there, no adb which is fair enough
Portable devices-g3 with yellow warning triangle-lg electronics 4.0.0.0- the device cannot start code 10
Ports (com & lot)-lg mobile USB serial port (com 4)-lg electronics 4.0.0.0-working properly
So I need to trouble shoot why the device cannot start. I have downloaded 2 packs of Lg drivers, lg united mobile driver & lg mobile driver. Both of which contain loads of drivers inside.
If I guide windows into either of the folders it won't install any new drivers giving an error saying that the driver software is already up to date.
I'm going to Google to find out what's going on with device cannot start error, if I'm missing something obvious please jump in
Can you please post complete screenshot with windows device manager (with open ports menu) and adb console with command "adb devices" ?
In your chromebook, do you have disabled all USB power saving bull****s? Also check VM software to see if there is such a possibility to enable/disable USB power plans.
At least, sorry for my bad english Still a lot of things to learn.
Your English is fine I understand perfectly, in fact I wouldn't of guessed it's not your native language so don't worry! Iv taken photos of my screen. You will see when the phone is turned on normally the host and client can both see the device and adb shows the device is detected and returns the serial number, all good there. The last photos shows when it's in download mode and that the driver isn't working properly, it can not start the device with a code 10 error. If I can fix that I know the lgup programming will run. The problem is because the PC can't communicate with the PC in download mode because of some driver issue.
I'm going to have to carry on tomorrow as I have to go to work and the Mrs needs her phone here while she sleeps
The Gingerbread Man said:
Your English is fine I understand perfectly, in fact I wouldn't of guessed it's not your native language so don't worry! Iv taken photos of my screen. You will see when the phone is turned on normally the host and client can both see the device and adb shows the device is detected and returns the serial number, all good there. The last photos shows when it's in download mode and that the driver isn't working properly, it can not start the device with a code 10 error. If I can fix that I know the lgup programming will run. The problem is because the PC can't communicate with the PC in download mode because of some driver issue.
I'm going to have to carry on tomorrow as I have to go to work and the Mrs needs her phone here while she sleeps
Click to expand...
Click to collapse
Please, enter download mode and change in Windows COM port from #3 to #41 and try LGUP method . It's up to you what method (upgrade, full wipe) you choose.
OK sounds straight forward enough. As I say il have to try tomorrow as I'm at work now and left the Mrs with her phone at home asleep, she will be working night shift so it will have to be when she is back home. I really appreciate the help and il post again to update how I get on
Where I am now is no further, iv tried changing the port to 41 through device manager. Iv set the port 0041 in virtual box for USB settings. Iv tried several sets of drivers. What keeps happening no matter which set of drivers I use when the phone goes into download mode mtp stops working and stops the phone communicating with the PC. When I restart it will work normally for a while but go wrong again. If I try lg up and starting the upgrade in download mode it gives me an error saying it can't change to download mode if I choose refurbish or upgrade. Lg PC suite just hangs at 0% and returns an error after a while. The 2014 flash tool will get as far as trying to flash but hangs at 4% and returns an error but doesn't specify what. I really don't know what else I can do. When these programs reboot the device into download mode it disconnects the device from the virtual machine and I can't get it connected again quick enough before errors are returned or mtp stops working which requires me to reboot the VM or phone. The only thing I can think to do is try on another machine. If it was my phone I would of thrown it out the window or under a bus. Lg software is unusable through virtual machines and I am not buying a new PC just for this lol Il see if I can use someone else's. I hate being defeated, iv have spent probably some 16 hours and got no where! Why can't they just release an ota? It only strengthens my belief in nexus and fastboot. Sorry for the rant but this really has got under my skin and I don't like giving in
Edit
I'm just as annoyed with windows as lg at this point. I really don't like using it. Grrrr
When I enter bootloader to try and flash twrp.... I get the message "waiting for device"
Trying to flash TWRP
can anyone help?
ADB recognizes the device...as soon as I reboot into the bootloader.... it disconnects
Anyone?
no one?
bigd19888 said:
When I enter bootloader to try and flash twrp.... I get the message "waiting for device"
Trying to flash TWRP
can anyone help?
ADB recognizes the device...as soon as I reboot into the bootloader.... it disconnects
Click to expand...
Click to collapse
If you want helpful responses you have to be more specific. Assuming you have the fastboot files installed on your PC/laptop ... What LG G4 model? What software version? Bootloader Unlocked? etc.
Assuming you have installed on your PC/laptop LGMobileDriver_WHQL_Ver_4.2.0 available for download from the LG US site as the Windows driver can create issues, have you tried downloading and installing the "Official" TWRP app and installing that way?
Suggest if you are still having problems, you head over to: https://forum.xda-developers.com/g4/development/recovery-twrp-3-touch-recovery-t3442424
Read the OP thoroughly and post any issues you're having there.
sdembiske said:
If you want helpful responses you have to be more specific. Assuming you have the fastboot files installed on your PC/laptop ... What LG G4 model? What software version? Bootloader Unlocked? etc.
Assuming you have installed on your PC/laptop LGMobileDriver_WHQL_Ver_4.2.0 available for download from the LG US site as the Windows driver can create issues, have you tried downloading and installing the "Official" TWRP app and installing that way?
Suggest if you are still having problems, you head over to: https://forum.xda-developers.com/g4/development/recovery-twrp-3-touch-recovery-t3442424
Read the OP thoroughly and post any issues you're having there.
Click to expand...
Click to collapse
I have minimal adb and fastboot installed
device is h811 20v
bootloader is already unlocked
and yes I'm using LGMobileDriver_WHQL_Ver_4.2.0
sdembiske said:
If you want helpful responses you have to be more specific. Assuming you have the fastboot files installed on your PC/laptop ... What LG G4 model? What software version? Bootloader Unlocked? etc.
Assuming you have installed on your PC/laptop LGMobileDriver_WHQL_Ver_4.2.0 available for download from the LG US site as the Windows driver can create issues, have you tried downloading and installing the "Official" TWRP app and installing that way?
Suggest if you are still having problems, you head over to: https://forum.xda-developers.com/g4/development/recovery-twrp-3-touch-recovery-t3442424
Read the OP thoroughly and post any issues you're having there.
Click to expand...
Click to collapse
I have the right files, when I get into adb reboot into bootloader
it no longer recognizes the device. I cannot flash twrp
After reboot into bootloader, open your "windows device manager" and see if windows detects your device properly.
RuedasLocas said:
After reboot into bootloader, open your "windows device manager" and see if windows detects your device properly.
Click to expand...
Click to collapse
seems like a driver problem, need to keep removing and reinstalling in device manager for it to recognize my phone
I'm using the right driver...so I don't know what the problem is
quite annoying
windows xp I never have a problem with adb and fastboot.....windows 7 and up. ALWAYS
bigd19888 said:
seems like a driver problem, need to keep removing and reinstalling in device manager for it to recognize my phone
I'm using the right driver...so I don't know what the problem is
quite annoying
windows xp I never have a problem with adb and fastboot.....windows 7 and up. ALWAYS
Click to expand...
Click to collapse
Don't allow Windows 10 to update your drivers - you can set that up in Windows. Google it for the how-to.
bigd19888 said:
I have the right files, when I get into adb reboot into bootloader
it no longer recognizes the device. I cannot flash twrp
Click to expand...
Click to collapse
bigd19888 said:
seems like a driver problem, need to keep removing and reinstalling in device manager for it to recognize my phone
I'm using the right driver...so I don't know what the problem is
quite annoying
windows xp I never have a problem with adb and fastboot.....windows 7 and up. ALWAYS
Click to expand...
Click to collapse
The device type changes depending on "how" its connected. Windows can "see" it as a ADB device, MODEM, etc...
With the phone connected, uninstall all device related on windows device manager, refresh the device manager for it to detect the phone as it should be (as you need it to be detected).
Sometimes its needed a manual device driver install. Happens some times to me, unfortunately I don't remember exactly how I do it because the issues (when it happens) are kind of random, so, I need to "understand" what is going wrong and fix it.
Just to tell you that is nothing unfixable on the procedure, you just need to have patience and find out how windows is supposed to detect your device.
If you don't find out by yourself, tomorrow (Monday), I'll try to see on mine how it should be detected in fastboot mode and tell you. Today its already late for me...
Good luck
RuedasLocas said:
The device type changes depending on "how" its connected. Windows can "see" it as a ADB device, MODEM, etc...
With the phone connected, uninstall all device related on windows device manager, refresh the device manager for it to detect the phone as it should be (as you need it to be detected).
Sometimes its needed a manual device driver install. Happens some times to me, unfortunately I don't remember exactly how I do it because the issues (when it happens) are kind of random, so, I need to "understand" what is going wrong and fix it.
Just to tell you that is nothing unfixable on the procedure, you just need to have patience and find out how windows is supposed to detect your device.
If you don't find out by yourself, tomorrow (Monday), I'll try to see on mine how it should be detected in fastboot mode and tell you. Today its already late for me...
Good luck
Click to expand...
Click to collapse
everytime I boot into the bootloader the driver stops working.. when I boot the phone normally windows doesn't recognize my phone. it is unknown, so I remove the driver, reinstall it., get into bootloader and same issue persists "waiting on device:" I think the lg driver keeps crashing or it is windows issue
will try again tomorrow
bigd19888 said:
everytime I boot into the bootloader the driver stops working.. when I boot the phone normally windows doesn't recognize my phone. it is unknown, so I remove the driver, reinstall it., get into bootloader and same issue persists "waiting on device:" I think the lg driver keeps crashing or it is windows issue
will try again tomorrow
Click to expand...
Click to collapse
Your device should be seen as "LGE Android Phone" (if your lg drivers are good).
Now gonna be tricky because my OS is in Portuguese, I don''t know exactly the path name in English... use your imagination
Connect the device on a USB 2 Port !!!
In windows device manager, select "update driver", "search software on the computer", "allow to choose from a list of avalable drivers". unmark the "compatible hardware" and find on the list the needed drivers. If the "LGE" drivers don't work, try to download Universal ADB Drivers, maybe it works.
bigd19888 said:
everytime I boot into the bootloader the driver stops working.. when I boot the phone normally windows doesn't recognize my phone. it is unknown, so I remove the driver, reinstall it., get into bootloader and same issue persists "waiting on device:" I think the lg driver keeps crashing or it is windows issue
will try again tomorrow
Click to expand...
Click to collapse
I'm thinking it could be a corrupted LG driver. Download another from the LG US site, ONLY. Uninstall the one you have installed now, reboot and install the newly downloaded one. Then connect your phone and see if it is recognized and shown correctly in Windows Device Manager. Also, in adb type lsusb and see if the phone is listed in the output.
bigd19888 said:
everytime I boot into the bootloader the driver stops working.. when I boot the phone normally windows doesn't recognize my phone. it is unknown, so I remove the driver, reinstall it., get into bootloader and same issue persists "waiting on device:" I think the lg driver keeps crashing or it is windows issue
will try again tomorrow
Click to expand...
Click to collapse
Boss, no need to struggle with this ADB anymore.. there is a tool called FWUL which was created for people who have driver issues... Check it out here:
https://forum.xda-developers.com/an.../live-iso-adb-fastboot-driver-issues-t3526755
:good: