Sorry guys i have searched but havent found this problem before
sync cannot be started because you are not able to log on to the network and access information. Restart your dektop computer and sync again. if the problem persists, contact your network admin.
Well restarted comp and phone and nothing, worse thing is it is happening on 2 different computers same error msg, one vista is preloaded on my laptop the other downloaded, ive ttried downloadloading the app again and again even different sources,
anyone seen this and able to shed some light on the situation really need to sync.
Jason
womblesa said:
Sorry guys i have searched but havent found this problem before
sync cannot be started because you are not able to log on to the network and access information. Restart your dektop computer and sync again. if the problem persists, contact your network admin.
Well restarted comp and phone and nothing, worse thing is it is happening on 2 different computers same error msg, one vista is preloaded on my laptop the other downloaded, ive ttried downloadloading the app again and again even different sources,
anyone seen this and able to shed some light on the situation really need to sync.
Jason
Click to expand...
Click to collapse
I haven´t heard of this problem before. One thing you can try is to remove the CHECK MARK in START > Settings > Connections > USB to PC and UNCHECK Enable advanced network function.
I have done multiple searches and have not found anything. WIFI works, but gprs will not connect, i've tried disabling proxy and everything. I am currently using schaps 3.60a and the error i get is the answering modem has disconnected to check your connection settings click setting tab. I have not seen this error before. I've flashed multiple 8525's before. I have one working perfectly fine, and this is a second one i followed the exact same steps but gprs will not work no matter what.
I'm suddenly having an identical or almost identical problem on VP3g's ROM. My Wifi connection with PIE works fine and I'm getting push e-mail delivered. But when I try to connect off WiFi as I had always done before, I get the message:
"Cannot connect with the current connection settings. To change your connection settings, tap Settings"
I've checked my settings and they seem correct and the same I always used. I've checked to see that my NoData settings were not inadvertently set wrong, but Media Net is Enabled. I've tried flushing temp files and cookies. I even tried erasing them and then reestablishing them by going online with WiFi. Finally I also tried using Opera.
Nothing works. This is maddening
The only thing strange or different is that I had set HTC Custom for temp files to be on my SD Card and when I now tried to set them on main memory (to see if somehow that might work) I get a series of error messages each time and files remain on SD.
Is it possible for the radio for gprs to be corrupt?? Or it could it be something simple as a registry edit? On the phone it is instantaneous when you try to connect to gprs it kicks back that message right away. So i know for sure gprs/edge is inop. Not sure why though.
Check with your operator
It happens to me once in a while even when the "E" shows up in the display indicating Edge abailability, but reality is that the network is down or highly congested.
chhuong I think you are right and it must be a corrupt registry entry. I know that the visible settings are correct.
It occurred to me that I have been using NODATA to turn off GPRS reception whenever I wanted to use Wifi and perhaps one of the times I set it to be disabled and then enabled it again, it must have been left as disabled even though it "says" that it has been re-enabled. Also I had a problem trying to change the cache from Main to SD, and would keep on getting errors whenever I did, using HTCustom. So probably at some point some registry corruption must have crept in. Unfortunately I've become too lazy to open the registry editor and dive in to find out where it might be.
Anyway, I finally got tired of it not working and used the problem as an excuse to move from VPG's 3.60.1 to 3.60.2. I reflashed this morning and it's been fine ever since. This time I won't use NODATA.
well actually i've tried flashing multiple roms and multiple radios, and nothing, still no gprs? So mine might be an internal fault?? Has anyone ever heard of that happening??
have you tried: start - settings - connections -connections - advanced - select networks - Media Net? Reverse it back to my network when you to use WIFI.
I've got similar problem after reflashing. Try to run Shap's Advanced configuration tool, select Connections tab and click Enable HSDPA. Don't ask me why, but it helped me to solve the problem, even there is no HSDPA available here...
I am having the same problem but i dont think its schaps rom, i think it happened either after i installed the 1.54.10 radio or after i installed the shogun cabs. If a moderator or senior could point us in the right directions, it would be much appreciated.
Rastislavko said:
I've got similar problem after reflashing. Try to run Shap's Advanced configuration tool, select Connections tab and click Enable HSDPA. Don't ask me why, but it helped me to solve the problem, even there is no HSDPA available here...
Click to expand...
Click to collapse
I tired that many times, but it didnt help, thanks anyways.
FWIW, I was able to clear this up the last time it occurred by going in to Menu > Tools > Options > Memory and clearing the History, deleting files and clearing cookies, then soft reset, and everything was okay.
Try this cab http://forum.xda-developers.com/attachment.php?attachmentid=54309&d=1192447925, and if it doesnt work try enabling hspda, and if that doesnt work, try calling your provider and ask them to make sure that your account is enabled for data. I tried all that, then, because i dont have a data plan, but i use pay per usage, i went to ATT's site and added a data plan. Now it works, so i think its disabled on ATT's side. GOOD LUCK FELLOW HACKERS
I can't sync my phone to my pc anymore. I had flashed ROM][** 3VOLUTION series **][WM6.5 STD 21234][Latest Build 3VO.1.20.061209 RC1] and all the patches. It was working well then It began to lock-up on me. When I reset it it would say "No Service". After several soft-resets it would either say "T-Mobile" and let me make calls or say "Phone off" and not allow me to turn the radio on. I'd have to reset it 5-6 times. So I went back to WM6 by fashing in bootloader since my pc would not sync with my phone in normal mode. I still can't sync. I've tried reinstalling Windows Mobile Device Center, restarting my pc. Please help
Solution
After alot of web-searching if found out my data cable was the cause. It was slightly bent causing a bad connection. I had a extra cable and now I sync with no issues. Tried it with 3 different ROMS on 2 Dashs'. Here is the post that made my Father's Day.http://forum.xda-developers.com/showthread.php?t=229565
I am trying to upload a new ROM to my phone but i am having problems with it being recognised by my PC.
Firewall is switched off on my PC.
USB to PC settings on phone set to prompt me and default to ActiveSync.
PC not finding the Memory Card also as a drive.
Hard-Reset also performed with no joy.
Nothing is happening however other than charging. This is the same on all PC's i have tried.
Any ideas how i can get it working??
goochy said:
I am trying to upload a new ROM to my phone but i am having problems with it being recognised by my PC.
Firewall is switched off on my PC.
USB to PC settings on phone set to prompt me and default to ActiveSync.
PC not finding the Memory Card also as a drive.
Hard-Reset also performed with no joy.
Nothing is happening however other than charging. This is the same on all PC's i have tried.
Any ideas how i can get it working??
Click to expand...
Click to collapse
If you find a solution, tell me!
Mine won't sync either, no matter what I try, so I've resorted to using a BT USB for syncing/file transfer. I have to flash via SD card and won't be able to use Task29 until it's set up to work via SD card either.
Debbie
DebbieNY13 said:
If you find a solution, tell me!
Mine won't sync either, no matter what I try, so I've resorted to using a BT USB for syncing/file transfer. I have to flash via SD card and won't be able to use Task29 until it's set up to work via SD card either.
Debbie
Click to expand...
Click to collapse
You can enter bootloader and then plug in the usb. This way you don't need to sync with active sync Task29 runs this way.
Lennyz1988 said:
You can enter bootloader and then plug in the usb. This way you don't need to sync with active sync Task29 runs this way.
Click to expand...
Click to collapse
Nope, that won't work for me. When I enter the bootloader, it says 'serial' in the white portion at the bottom instead of 'usb'. No amount of hard resets clears this up for me.
Thanks, though.
Debbie
There's good news and bad...
I had this problem, the good news is that I think it's fixed now, the bad news is it involve a trip to HTC. I flashed back to stock and still had the problem, called HTC who agreed it was probably a h/w fault, they piucked it up, repaired it and it's in a UPS van on it's way back to me as I type.
Until it comes back I can't confirm they really have repaired it, or what they've done to fix it.
HTH
Gordon
Thanks so much, Gordon. Please let me know how it worked out for you and what costs were involved.
I'm sure, at some point, I will have to bite the bullet and get mine fixed as well.
Debbie
GordonTGopher said:
I had this problem, the good news is that I think it's fixed now, the bad news is it involve a trip to HTC. I flashed back to stock and still had the problem, called HTC who agreed it was probably a h/w fault, they piucked it up, repaired it and it's in a UPS van on it's way back to me as I type.
Until it comes back I can't confirm they really have repaired it, or what they've done to fix it.
HTH
Gordon
Click to expand...
Click to collapse
I have the same problem.
After all, I find that the USB port of the phone is bad, i.e. some pins are brocken.
After changing the USB port, I solved the problem.
DebbieNY13 said:
Thanks so much, Gordon. Please let me know how it worked out for you and what costs were involved.
I'm sure, at some point, I will have to bite the bullet and get mine fixed as well.
Debbie
Click to expand...
Click to collapse
Well one new mainboard, it works! I was also having intermitent touch screen problems so they've replaced the LCD! All under warranty, so it didn't cost a penny Well done HTC.
Gordon
goochy said:
I am trying to upload a new ROM to my phone but i am having problems with it being recognised by my PC.
Firewall is switched off on my PC.
USB to PC settings on phone set to prompt me and default to ActiveSync.
PC not finding the Memory Card also as a drive.
Hard-Reset also performed with no joy.
Nothing is happening however other than charging. This is the same on all PC's i have tried.
Any ideas how i can get it working??
Click to expand...
Click to collapse
Just to make sure, did you set Activesync to use the slower method? When I upgraded my ROM I had to use the slow method in order for my Windows 7 to see the new ROM.
guys i have the same prob and i bought it from USA unlocked Stock Asian Rom and Now i am in Pakistan.I had some major issues with it.It just stopped syncing one day.Have tried everything.The battery usage also increased dramatically(it dies in 10 hrs after a full recharge)I thought it was a virus but now i think its hardware.I think i'll send it for warranty claim.
I just went through this on my VZW TP2. A month ago it began syncing slowly or not at all, very sporadic, and after messing with it for two hours it began working again. I tried everything except a hard-reset, including reinstalling ActiveSync, changing cables, etc. It happened again earlier in the week and an hour with HTC on the phone couldn't revive it. I called VZW and had a new phone in two days, and we're now up and running again.
I tried BT sync at one time but didn't like having to click multiple times to get it going every time I got within range. There doesn't seem to be a way to have it sync automatically or with one button.
I have the Tmo TP2 and SAME issue, I luckily am getting a new one from Tmo, but I am really starting to think something more is going on here........... I am not convinced ALL OF US, even a lot on PPC geeks, same exact issue? different carriers? come on........... I am glad I am getting a new one, but I would really love to know the root cause of this. IT SEEMS VERY VERY VERY MUCH LIKE THE "TRANSFER DATA" option if "turned off" (if you will), not a physical hardware failure. Kinda like you can turn that option off in windows to not allow USB storage devices to connect, you can still connect other devices (mice, keyboards) or charge things (like our phone) but the computer will NOT see it there at all!!! I really think something like that is happening IN our phones!!! hundreds of us bend the same pin(s). Too wierd.
I hade the same problem!
After trying everything I finally opened up the phone. In the phone I found some dust particles on the usb pins on the board, I cleaned it up and now the sync works again.
NO Sync with Windows 7
I have the same issue with my Win 7 machine...... PC does not even see the Phone at all. Plug it into my Windows XP machine and it's perfect, connects everytime, using the same cable. i have tried everything i can find on the internet and multipal forums, still no Joy! Works great on Win xp, so i think it is a problem with win 7 drivers.....
Still searching for an answer........
Oh, by the way it was working for months, just stopped one day....i even wiped out my pc and reloaded it, no Joy!
I'm starting to have the same issues on my AT&T Tilt 2 but sporadically. Every now and then I lose the phone in MS activesync. I have to delicately place the phone on the table and gently insert the USB cable into the back of the phone in order for it to sync up with my PC. If I move any of the cables or phone, it will drop the connection. I tied several different cables and PC's so I ruled that out. The problem seems to be the USB port on the phone.
Its been almost a year since I've had this phone so I want to get that fixed. If I were to call AT&T and inform them of this would they replace the phone or would they fix the problem with the port and send me the phone back?
deeken said:
I'm starting to have the same issues on my AT&T Tilt 2 but sporadically. Every now and then I lose the phone in MS activesync. I have to delicately place the phone on the table and gently insert the USB cable into the back of the phone in order for it to sync up with my PC. If I move any of the cables or phone, it will drop the connection. I tied several different cables and PC's so I ruled that out. The problem seems to be the USB port on the phone.
Its been almost a year since I've had this phone so I want to get that fixed. If I were to call AT&T and inform them of this would they replace the phone or would they fix the problem with the port and send me the phone back?
Click to expand...
Click to collapse
I'm not sure what your warranty is from AT&T, but HTC normally has a 15 month warranty on the device. Go through AT&T if you can first. The carriers will normally ship you a replacement device before you send yours in. HTC's repair process is generally very lengthy as they actually repair your device and then send it back to you rather than shipping you a refurbished unit like carriers normally do.
As far as it not connecting, try a different connection method like BirdieSync and Thunderbird. I use this combo on my PC (W7 Pro x64), and it works wonderfully every time.
Hi everyone
Here's the situation. My Mum passed away in December very suddenly. Her Desire Z is really causing us trouble. She had a screen lock pattern set, which we haven't been able to guess.
We have reset her Google passwords (since we didn't know the old ones) but the device has WiFi turned off, and mobile data turned off, so when we try to login to one of her Google accounts to reset the screen lock it says "invalid username and password". For these reason I also can't send an unlock reset from Google device manager. I've obviously tried connecting it via a USB cable just to copy photos or any other files but it won't even do that while it's locked. It just doesn't seem to recognise that a USB cable is connected, unless it's plugged into a charger.
I've googled it at length and tried all sorts of tricks like calling the phone and clicking certain buttons, opening the keyboard at exactly the right moment, and so on. Unfortunately nothing has worked.
I know how to hard reset the device, but is there any way at all to get access to it before I do so?
Thanks so much for any help you can offer.