Related
Sorry to open a new thread, but I want to ask is there any method to fix this problem apart from using Mitty?
I tried flashing LVSW 3-26 firmware using SPL 1.06 or the 1.1x, both gave me the end results of white screen.
I am newbie to Mitty and worry of bricking my device with Mitty.
Can anyone suggest what I could do to cast the white screen away?
Desperately in need of help.
Thanks
I see by the sorry for a new thread you have read
http://forum.xda-developers.com/showthread.php?t=299644
I am with you. Right now I would go to a different version. The previous LSVW or another build. I am trying the mtty thing but I am running vista and cannot get NBHextract to work.
If you do not want to risk it maybe holding off a day and checking back for an update. These guys are fast. Also like I said go to a different version. I flashed the revious LSVW os only and it worked 3 times in a row perfect
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
jasjamming said:
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
Click to expand...
Click to collapse
Hell yes. Makes the guide clearer to make (i will mention the value of embedded HardSPL and radio though )
mrvanx said:
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
Click to expand...
Click to collapse
The White Screen for me is i can see the HTC Flash screen, but the Windows Mobile screen becomes white without me even seeing it and the Today screen is also white also.
Also, i was wondering if using Hard-SPL might help?
Thanks
nope i am using hard spl and tried it still white screen
Me too....
I also got the white screen of death. lol.
i used the version that was posed on the main page. After the update and initial boot the white screen comes on.
I was able to bypass this after several resets. Then it will start the customisation process. After which it will restart and go to a white today screen with no icons. I do have the task bars at top and bottom but no dialer.
My fix. I went and dl RUU_HER_6.20.100.0_0.00.00.00_XDA_WWE_XBOW_Custom. I installed it and works like it did before.
I will wait till there is a fix for this...
BTW I have a cingular 8525
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Think this should help, I did cut the quote down a bit.
mxlaser said:
After hours and sleepless night, and so many flashes i think the NAND in my dopod was hot enough to fry a breaky for me, i've come to the comclusion, i have 100%, no issue success with all ROMS, using 1.01MFG and MTTY flashing each part seperatly. Not one time has a white screen appeared, with ANY rom, and i've tested all the current WM6 roms.
I d/l'd and tried the latest LVSW rom (26/3) and have exactly the same issue when using the packaged RUU to install it. However, when i use MTTY, its perfect every time.
I would suggest the following steps
1. Load into the bootloader mode (HOLD POWER/OK buttons and press soft reset)
2. Flash SPL-1.01MFG onto your device (Read wiki info and file links here)
3. Once flashed, reboot and do step one again to get back into boot mode. You should now see your boot as 1.01MFG
4. Use NBHextract to extract 06_OS.nb file from RUU_signed.nbh file found in downloaded rom package.
5. Load up MTTY, follow steps in the wiki for the 1.01MFG on how to flash OS.nb (OS.nb is the 06_OS.nb file renamed to make it easier)
6. Once flash is complete, the latest rom is installed and you won't have a white screen
7. Now flash Hard SPL v4 onto your devic for safety reasons.
And this fix is EASY to do, 100% works every time.
Click to expand...
Click to collapse
It worked 100% for me first time.
Just for the record I used ROMbaker to get the 06_os.nb then just rename it to os.nb.
Also if you are not sure and feel nervous about bricking it, then just wait for a proper fix.
Finally I got the white screen a few times and everytime I flashed the previous LSVW os only the device worked perfect. From my reading Olipro may have found the problem haveing to do with bad blocks. Nothing major but I believe they are working on it currently.
If you follow these directions and install 1.01MFG, you can BRICK YOUR DEVICE with ANY mistake!
We're not talking about a brick that can be fixed either. You precious phone will become a paper-weight forever more! Really.
I DON'T CARE WHAT THE N00BS ON HERE SAY; FLASHING 1.01MFG IS **NOT** A RECOMMENDED WAY TO FIX THIS PROBLEM! DO NOT INSTALL 1.01MFG UNLESS YOU ARE OK WITH THE CHANCE THAT YOUR PHONE WILL BE BROKEN FOREVER!!
bubu23 said:
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
Click to expand...
Click to collapse
No, I have never installed any language packs on my phone. I use good ol' english.
HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
mzahiri said:
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
Click to expand...
Click to collapse
I tried going back to WM5 firmware.
Flashing the firmware is a success but I still got the white-screen-of-death.
Any other options?
Thanks
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Olipro said:
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Click to expand...
Click to collapse
Go Oli Go!
Question ?
Hi All,
Sorry N00b alert at this .. but very IT literate
Just a quick question off the cuff, what was the last(est) version (can you provide a link) that i can flash to now .. (not mucking around seperating stuff etc) that wont give me the white screen issue.
I am currently sitting on LSVW 25/3 1.38.10 radio and 1.13oli
Thanx test
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?
god, I'm gonna admit, I have no idea what any of that stuff is. I know the tricolor screen, I dont know what an SPL is.. a friend of mine usually sends me the upgrades for my programs and i just follow his instructions, but as i was loading the new version it got unplugged and when i tried to follow the restore options it wouldnt restore the upgrade.. so I've learned the term is bricking.
Activesync won't reconnect the phone.. it tries, then doesnt recognize the device.. so even if i try to downgrade to 1.04, it wont work because it wont sync with the damn computer.. I hard reset, i soft reset, i got it to the tricolor screen, i tried all the stuff in the hermes upgrade problems thread, but i dont know wtf i'm doing. the file mtty.exe wont work.. it just freezes at whatever screen i happen to get it to, be it the tricolor or the HTC screen.
please, someone help me out.. I apologize in advance for not being as savvy as everyone else, but I need some advice here.
Go the tri colour screen
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Did u hard SPL your device?
Costanza said:
press both soft buttons (the ones that interact with the screen) and insert the stylus and reset.
from here you can make an hard reset. Whenever my phone hangs (or whatever) I use this way BUT i use the cancel button (X) and the phone simply restarts fine
Click to expand...
Click to collapse
I hard reset, I soft reset, it freezes either way. The only way the computer recognizes the phone is when I get the tricolor screen but active sync wont connect to FINISH loading the upgrade.
antonlim1999 said:
Did u hard SPL your device?
Click to expand...
Click to collapse
I cant because it wont connect to activesync to install anything else.. i cant dongrade, upgrade, nothing! i cant get to version 1.04 from the 1.06 im running because activesync wont recognize my phone.
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
sg10 said:
I think antonlim1999 mean, did you hard-spl before you even upgrade to wm06 or not ?
Click to expand...
Click to collapse
I already had wm6, i was just getting a better version that didnt have as many bugs.. I began loading it, it got to 45%, then the cat knocked the cable out and it got messed up.. I dont believe it was hard-spl beforehand.. im gonna go with no.
Could you try to SPL in the tri colour mode (as you have contact between the unit and the PC)?
Link below has all (almost) info
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
A warning to those with an aversion to reading
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
hiddenconcepts said:
I was in the middle of upgrading my version of WM6 and i got unplugged and now it wont resume and the phone is stuck at the loading screen that says "HTC" mobile.htc.com
what the heck do i do? it wont budge.. it wont sync with active sync, it wont resume.. i'm flipping out.
Click to expand...
Click to collapse
You are not even in the right forum, you'll get better help elsewhere.
Start reading here: http://forum.xda-developers.com/showthread.php?t=286755
Hard SPL thread: http://forum.xda-developers.com/showthread.php?t=296722
philjohn said:
This is a warning to those who don't really know what they're doing. Upgrading a ROM on a WinMo device is something that should only be done when you know what you're doing.
Hope your device can upgrade well, but please, take the time to actually read the wiki and forum before upgrading again, for your own wallets sake.
Click to expand...
Click to collapse
thanks, but I've upgraded before to other versions without a problem and I know that pulling the plug out is a bad idea.. the cat jumped up and ripped it out causing it to brick.
What all the smart arses on this site should be telling you is that you don't need activesync to run the upgrade - it will work just fine from the tri-colour screen.
First off, when you get your phone into the tri-colour screen, check the SPL version - if it isn't 2.10 olipro, the first thing you need to do is read the vanx guide's (link in my sig) and get hard SPL 2.10 olipro on there ASAP - this will prevent you from bricking your phone.
If it is already 2.10 olipro, then breathe a sigh of relief as everthing is OK - just put it into the tri-colour screen and run the upgrade again - it should start again with out a problem.
Cheers,
Smiffy.
Hi everyone!
Using tools found in Buzzdev's site, I tried to change the splashscreen on my Uni, but something failed. I tried it 3-4 times with correct images (480x640 bitmap 24bit converted in rsb) but after telling me that the update is made, it makes a soft reset and the image that appears is completely messed up!
Also, before making this thing, it remained in the blank initial screen for 1-2 seconds, now it stays there for 15 seconds!!! Everytime I make a SR I fear that it's bricked!!!
Any help is very appreciated...
Auzman said:
Hi everyone!
Using tools found in Buzzdev's site, I tried to change the splashscreen on my Uni, but something failed. I tried it 3-4 times with correct images (480x640 bitmap 24bit converted in rsb) but after telling me that the update is made, it makes a soft reset and the image that appears is completely messed up!
Also, before making this thing, it remained in the blank initial screen for 1-2 seconds, now it stays there for 15 seconds!!! Everytime I make a SR I fear that it's bricked!!!
Any help is very appreciated...
Click to expand...
Click to collapse
Please use the SEARCH button: http://forum.xda-developers.com/showthread.php?t=252720&highlight=splash+screen
have you voted?
Good luck,
Take a look over here:
http://forum.xda-developers.com/showthread.php?t=399403&highlight=bootscreen
I read everything in those 3ds but nothing helped me.
I tried 2 more times to change the splashscreen and I obtained another messed up image, but now the blank screen has a normal behavior: it appears for 2 seconds.
Even if I haven't received error messages I tried to install rapi.cab and SdkCerts.cab, but nothing changed. Trying to install htc_certs it says that it has to unistall the previous customization tools. Have I to continue uninstalling?
Another question: I didn't entered in bootloader mode, was I supposed to?
In edit:
@orb3000: oh yeah, I voted long time ago for our great Uni!
I add another thing: when Uni boots the image is totally messed up, but when I try to flash another image the backup is correct!
I tried to install htc_certs, but nothing changed, except that now it takes more time to boot...
Ok, here are the news:
I found this post that took me to this one.
According to Tomal's instructions, I tried to remove the first 28 byte from the .rsb header, but no program could open it, due to missing header.
I tried to change the initial offset from the batch file (without editing the .rsb file) but nothing changed, same messed up image on boot.
So question is: what am I supposed to do now? Install a rom with a different splashscreen, edit qhat I want and then revert to Tomal's rom? Seems too long to do!
Auzman said:
Ok, here are the news:
I found this post that took me to this one.
According to Tomal's instructions, I tried to remove the first 28 byte from the .rsb header, but no program could open it, due to missing header.
I tried to change the initial offset from the batch file (without editing the .rsb file) but nothing changed, same messed up image on boot.
So question is: what am I supposed to do now? Install a rom with a different splashscreen, edit qhat I want and then revert to Tomal's rom? Seems too long to do!
Click to expand...
Click to collapse
As far as I know you don´t have to reflash a ROM to have a new splash screen.
When I change mine just made a hard reset and voila! my new splash was there with the same ROM I was using
Good luck,
Nope.
That didn't work for me...
Any other idea?
Ok, half fixed everything.
I tried to flash my Uni with a Rom without flash disk and with a new splash screen. I used this one.
Obviously, flashing went wrong and my uni was stuck in the boot screen with a brand new splash screen! Now, I got a new splash screen with a bricked Uni...
Uff...
So I tried to enter boot loader. It did. Tried to install Tomal's 8.5, but again I obtained a bricked Uni.
I used mtty to format DOC and everything worked.
Then I installed again Tomal's 8.2 and my Uni is now working again.
But formatting DOC erased also splash screen!
So I don't have a splash screen at all.
Now, looking back I suppose that next time my ego will try to tell me that a wonderful brand new splash screen would bring my Uni to another level of power, I'll take one finger of mine and close it in the first door I find... That would solve everything.
Auzman said:
Ok, half fixed everything.
I tried to flash my Uni with a Rom without flash disk and with a new splash screen. I used this one.
Obviously, flashing went wrong and my uni was stuck in the boot screen with a brand new splash screen! Now, I got a new splash screen with a bricked Uni...
Uff...
So I tried to enter boot loader. It did. Tried to install Tomal's 8.5, but again I obtained a bricked Uni.
I used mtty to format DOC and everything worked.
Then I installed again Tomal's 8.2 and my Uni is now working again.
But formatting DOC erased also splash screen!
So I don't have a splash screen at all.
Now, looking back I suppose that next time my ego will try to tell me that a wonderful brand new splash screen would bring my Uni to another level of power, I'll take one finger of mine and close it in the first door I find... That would solve everything.
Click to expand...
Click to collapse
OK, send me your splash screen.
I'll prepare it for you.
tomal said:
OK, send me your splash screen.
I'll prepare it for you.
Click to expand...
Click to collapse
Tomal, you're great!
My idea was to use the splashscreen attached, but I was also wondering what is necessary to do for install it into a nk.nbf file.
You said that the header (the first 28 byte) has to be removed, then the .rsb file has to be inserted on the address 0x3f00000, but this is the (absolute?) address on the Uni memory, I don't know how it is managed on the .nbf file...
So, if I convert to .bin (or something like it) the .nbf file and with an hex editor I insert on the correct address the image everything should be fine?
My next question is: how the upgrade utility decides to update or not the splashscreen? Seems that something other has to be changed...
That's one of my screens, it's ready for flashing as you can see here:
http://forum.xda-developers.com/showthread.php?t=399403&highlight=bootscreen
Win_XP said:
That's one of my screens, it's ready for flashing as you can see here:
http://forum.xda-developers.com/showthread.php?t=399403&highlight=bootscreen
Click to expand...
Click to collapse
Infact I took it from yours!
But, as specified in the other posts, with Tomal's rom seems impossible to use the standard procedure...
Perhaps the only way is to insert the splash screen directly in the rom and flash everything at once.
Auzman said:
Infact I took it from yours!
But, as specified in the other posts, with Tomal's rom seems impossible to use the standard procedure...
Perhaps the only way is to insert the splash screen directly in the rom and flash everything at once.
Click to expand...
Click to collapse
ok, here it is.
Connect the device in activesync and run splash.exe
cheers
Nope, doesn't work. I have the same wonderful fully black splash screen...
Tomal, there's no problem, it's good as it is, don't go crazy for it!
And thank you again for your great support!
Auzman said:
Nope, doesn't work. I have the same wonderful fully black splash screen...
Tomal, there's no problem, it's good as it is, don't go crazy for it!
And thank you again for your great support!
Click to expand...
Click to collapse
Nope, don't be upset. I have another way. But you need to consider a HR, so do a backup before start.
Attached you'll find the splash and flashing tools. nk.nbf only contains the splash so your rom will be untouched.
Burn the splash in the regular way...
Once again, nothing good...
I used your last method, flashed the splashscreen, only soft-reset the device, the splashscreen appeared correctly, but it didn't boot.
So, I flashed your 8.5 standard (the special one has rltoday, but I don't like it so much...) and correctly finished the procedure. Once again, device didn't boot.
Used mty, format DOC, flashed again and now it works... Without splashscreen!
So, according to me the only way to restore a splashscreen on my device is to flash another rom which doesn't use flashdisk, change bootscreen and flash back to yours (for me is the best).
Too hard for me: flashing device contains a little danger every time you do it. It's time to leave my Uni with a rom for more than 3 days!!!
Tomal, once again, thank you for your support!!!!!!
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
Hi,
I have my Diamond over a year and all was great till one day, suddenly it can't load the OS.
After power on, the black screen with "TOUCH Diamond" appear,
then it shows the radio version in red at the right bottom of the screen and from there nothing happen.
I tried to flash several ROMs & Radios, including the original ROM from HTC site but nothing.
The process of flashing seems to be fine and in fill all the 100% bar,
then it restart like during regular ROM flashing procedure but still no boot.
I tried to flash other hard-spl and still nothing.
I'm really lost and I hope someone has an idea for a solution.
Thanks
sorry if it's not the right place for this topic,
I also put it on general Diamond post so this one can be deleted.
MTTY?
Have You tried MTTY utility. Maybe it could help you.
Manual:
http://forum.xda-developers.com/showthread.php?t=540290