Installed the Black Satin rom today - amazing btw! - and I've been wrestling with WLM all day. It did work at first but then stopped completely saying I was in an area with bad data coverage. ALthough I'm getting full H and 3G speeds.
After a hard reset, I tried WLM using wireless before I applied to Tmob settings and again, it worked perfectly. Drop Tmob back on and it dies again.
Anyone had this before and does anyone know of a workaround so I can have my 3G and WLM on the same handset.
Many thanks and keep up the good work. There's enough cabs on here to keep me entertained for days!!!
D-Jac
Just a quick question, are you putting in the T-Mobile settings manually, or via a CAB from here? I know most of the early CABs had a proxy hard-coded into them that could be causing problems. Let us know what country you're from and I'm sure someone'll be kind enough to give you the settings to put in. If it's UK, then:
Start > Settings > Connections > Connections
Advanced tab > Select Networks
New > Name it T-Mobile Internet and then click on the Modem tab
New > Name it T-Mobile Internet and select Cellular Line (3G)
Next > Access point is general.t-mobile.uk
Next > Finish
OK back outa few times and you're done.
Like I said, if it's not UK, this won't work! Also, if the problem isn't related to this - sorry!
Yeah, I added my T-Mob UK settings via the HTC tool that does it via ActiveSync. It added in an HTTP proxy that I couldn't delete. Strange, 'cos when I bought my Vario II it had no proxy defined.
When the proxy was there I could not access WLM. When I used a different CAB to re-add the settings, I could.
However, Agile Messenger still won't connect at all to AIM or MSN. Gawd knows why?!
Sorry - yes, I'm on T-mobile UK with web n walk. I found a cab on one of the wiki pages for T-mobile UK which is the first one I tried and didn't work. After posting here last night, I used the UK_Setup_ZD.exe program to load the T-mob settings and it still didn't work.
If anybody might be able to point me in the direction of a clean/usable T-Mob file that would be ace.
Thanks for the suggestion to load the settings manually. Before I cleared my phone of WM5, I followed the mrvanx guide to housekeep my existing setting but there is a starred out password in the connection for T-Mob internet so I couldn't set it.
As always, any help muchos appreciated!
If you're on T-Mobile UK, you don't need a username and password (trust me!). If you want, look up the details on the T-Mobile Help and Support website and it gives you step by step instructions on setting up the connections manually, that's where I got the above instructions from.
Oooh? Will try in and see how we get on. My searches have also lead me to other posts which think it may be a proxy settings, as the Tmob cab won't allow you to change the proxy.
I'll keep experimenting and will report back!
Confused Stu - YOU ARE A STAR!
Did a hard reset, back to a clean version of Satin. Input the details with no username and password and all seems to be working. Now all I need is to be able to stop it syncing every two seconds, but I shall have a mosey around the pages for the answer to that one and why I can't make it try wireless before dialling.
You've been a great help - cheers!!!
I had the same problem as you did after upgrading to Black Satin (starred out password in the T-mobile settings). I can confirm that you don't need the username or password to get it working.
Cheers,
Doogs
Related
After extensive serching through the forum and the Wiki i was stumped as to why WLM was failing to sync.
all i could find were people asking if anyone new what the problem was and a whole load of replies that suggested they serched for the answer. The problem being there isn't (as far as i can tell) an actual answer to this issue.
This was my issue.
I upgraded to the newest version of LVSW and i couldn't get WLM to sync, it kept on saying that there was a problem with the service or i have not got good enough reception. this was incorrect as could use IE without a problem.
Many people said that this was because the Beta had expired..which it of course had, so i tried all the new versions, stand alone that LVSW posted with his new ROM, Tried BE 2.0 with the built in version. all with the same result. NOTHING!!!
Now i have found the problem i had and i hope that it will help with others problems
I used to put in my GPRS settings manually, but i decided to download a .cab file with the T-Mobile UK settings. and this was the problem. it was adding a proxy to the connection.
To rectify the situation i deleted the connection and put it back manually with the Following Settings.
Connection Name : T-Mobile GPRS
Access Point: general.t-mobile.uk
User: user
Password: one2one
and nothing else. (these are the only setting T-mobile CS gave me)
I now have a working copy of the new Messenger (No contact duplication) on my Vario II.
I hope this rather long winded post will be of help to some of you on the forum.
B
Yes I found this also. I kept getting the Out of range error message.
However, it's fine to have a proxy on Orange UK and is actually required for the 3G connection. The problem I had was with Active Sync - it kept adding my corporate proxy server name to the GPRS settings. Removing them allowed WLM to connect first time!
eaglesrest said:
However, it's fine to have a proxy on Orange UK and is actually required for the 3G connection.
Click to expand...
Click to collapse
Eh? Are you sure? Seems plenty of people on here using Orange without a proxy set....
Just wondering, as I had been having problems, but not now, and I do have a proxy set, but ONLY in the WAP connection, not Orange Internet connection. Hmmm....
allanbeth said:
I used to put in my GPRS settings manually, but i decided to download a .cab file with the T-Mobile UK settings. and this was the problem. it was adding a proxy to the connection.
B
Click to expand...
Click to collapse
There were problems with the first t-mob uk cab posted, but someone put up a fixed version later on that I use without issues. Look about half way through in the UK operator cabs thread.
T-mob apparently use a transparent proxy, so no settings required.
Hi, would like to upgrade my T-Mobile UK Vario II to WM6, not worried about the warranty etc, just wanna get a performance / reliability boost as I have not been at all impressed by WM5! Would prefer the ROM to include all the basics like Java etc, would like to make it fairly simple to get going.
Last time I looked a lot of people seemed to think the 'black' rom was a good one, but I know things change quick here, can anyone tell me what they'd recommend?
Thanks!
I'm using HTC ROM on my T-mobile MDA Vario II for few months. In my opinion, it's a most stable ROM I've tried.
Links: http://forum.xda-developers.com/showthread.php?t=316726
Have fun
I'm currently using the Black Satin rom, along with radio 1.54. Working pretty nicely so far.
Watch out for how you get the T-Mobile UK settings back on though - using HTC's own WM6 setting installer device sets up the T-Mobile Internet connection with a proxy for some dumb reason. I was pulling my hair out over Windows Live not working full stop and really slow internet access for a while.
Thanks for the ideas!.... main advantage of black over HTC's official is it's been streamlined, cut down, am I right?
pLemming said:
I'm currently using the Black Satin rom, along with radio 1.54. Working pretty nicely so far.
Watch out for how you get the T-Mobile UK settings back on though - using HTC's own WM6 setting installer device sets up the T-Mobile Internet connection with a proxy for some dumb reason. I was pulling my hair out over Windows Live not working full stop and really slow internet access for a while.
Click to expand...
Click to collapse
T-Mobile UK settings
Internet
Start>settings>connections>connections>advanced>select networks>new
name the settings t-mobile
click modem>new
name the connection t-mobile and select the modem cellular line (gprs, 3g)
click next, the apn is general.t-mobile.uk
click next the username is user and the password one2one
click finish then ok and x till you get to the home screen.
connect to internet explorer to test
MMS (black satin rom) official rom theyre put in differently
start>messaging>mms/sms>menu>new>mms>>menu>options>message options>servers>new
server name: T-Mobile MMS
gateway: 149.254.201.135
port: 8080
server address: http://mmsc.t-mobile.co.uk:8002
connect via: pic your default internet connection
send limit: 100
WAP Version: WAP 2.0
Or you can go to http://www.t-mobile.co.uk/help-and-...obile-phone-manuals/?ref=newhome_phonemanuals pick your handset and see step by step instructions for all types of settings.
Enjoy
Connection settings
when inputting the user name and password for the internet APN, t mobile states that it doesnt need a username and password,
Putting anything in here leads to intermittent connection problems.
Thought I would let you all know!
OK, have done the upgrade as well (Everything is working hunky dooooreee) but this is really going to sound dumb. I upgraded but the splash screen when I turn on my Vario 2 mentions AT & T ?? Does anyone know how to change it back to T-mobile ?
roboraver said:
OK, have done the upgrade as well (Everything is working hunky dooooreee) but this is really going to sound dumb. I upgraded but the splash screen when I turn on my Vario 2 mentions AT & T ?? Does anyone know how to change it back to T-mobile ?
Click to expand...
Click to collapse
This is the way how to change your splashscreens back to TMob:
1) Download the TMob splashscreens from the net (or ask somebody to send it to you, also you can dump a TMob ROM to get those splashscreens)
2) Use this tutorial to flash the spashscreens to your device. This flashing will only flash the splashscreens so you will not lose any data. Be careful though and do what tutorial says (you can always brick your device if you do not know what are you doing).
Thanks all... got it all working with Schap's WM6 in the end, it does all that localization stuff for you automatically, very nice!
Interesting 6630boy, no usr / pass?... I'll have to try it. I'm sure last time I had em talk me through it on my other phone they were getting me to put a usr/pass combo in there...
This Schap's WM6 is absolutely awesome, basically everything that was screwy in the T-Mobile WM5 works, and works quickly enough to be cheerful about!
I ALMOST like Windows Mobile now, heh...
Yeah what's up with that?... on the t-mob site's manual it says:
Select connection type
* Press the Select a modem drop down list.
* Press Cellular Line (GPRS , 3G).
* Press Next.
The APN name general.t-mobile.uk must be in lower case letters.
If you selected the connection type Generic IrDA in step 6, you are now asked to key in a dial-up number. Key in *99# and go to step 8.
7
Enter APN name
* Press the Access point name input field and key in general.t-mobile.uk
* Press Next.
8
Enter username
* Press the User name input field and key in user
9
Enter password
* Press the Password input field and key in one2one
My hermes was working fine for the couple weeks I've had it, internet, internet sharing, everything. A couple days ago, the internet stopped working. I can still do calls, emails still seem to work (with exchange), sms is fine, although MMS is failing as well.
I have a 2nd 8525 and the same issues on that one too. I plugged my sim into a wing I had laying around, and voila, internet works. I tried all sorts of settings, tried surfing with wap.voicestream.com with the 216.155.165.50 or whatever proxy, etc.
I noticed on another forum that people in my area are having the same issues, but t-mobiles says the network is fine.
I am inclined to believe t-mobile on this one a bit, being that my Wing works fine... but neither of my 8525's (hermes) work...
One last note, when I boot up, I get a message saying the operator does not exist database, I just exit out the error and it WAS working fine even with that box, does it on both Hermes I have.
Any ideas!!!! Thanks. All help is really, really appreciated.
Mine stopped working temporarily yesterday, and started working again within an hour. Are you using the internet2.voicestream.com access point?
I'm using wap.voicestream.com -- but I had tried internet2.voicestream.com as well... are you using all the proxy settings with it (I HAVE the 19.99 unlimited data plan btw).
Both phones are using Schaps, so i'm considering flashing a different rom and seeing if that brings any new luck if I can't find any other help. But I have my main phone really well customized and would hate to have to do that.
What area are you in? I'm in South Florida (and on another thread, 2 or 3 other posters in south florida are having the same issues, weird)
With the unlimited data plan you should be able to use internet2 for all data and wap.voicestream for MMS. If you want I can post my configs that work, I just copied them from the T-Mobile Wireless configurator site using the Wing for my handset. Also, I'm from Northern Colorado.
RE: Internet:
I had an issue with t-mobile tZones back when they alowed it on smartphones... Then one day it just stopped working. about two weeks later, I finally got annoyed with them and called them.
They argued with me about tZones working for about 20 minutes and then finally found an internal memo about people using tZones to cruise the internet by accessing wap first, and once establishing a connection, usine pIE. So, You can't trust a phone company when it claims that their network is ok or that they ddin't cancel a part of your service without letting you know.
...BUT,
acording to them:
"216.155.165.050" FALSE INFORMATION
"216.155.165.50" TRUE INFORMATION
"Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for Internet access."
Setting up the handset
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Mo WEB in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter internet2.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
The new Internet profile is now configured and ready for use.
VPN
"Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for Internet access.
Setting up the handset
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Mo VPN in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter internet3.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
The new Internet profile is now configured and ready for use. "
"Picture Messaging (MMS) Configuration Complete
Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for picture messaging (MMS).
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Mo MMS in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter T-Mo MMS in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile GPRS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to T-Mo MMS and tap Set As Default.
Tap OK.
The new MMS profile is now configured and ready for use. "
"t-zones (WAP) Configuration Complete
Welcome to the T-Mobile Wireless Data Configurator. In a few quick and easy steps, this tool will help you configure your phone for t-zones (WAP).
Setting up the handset
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile Data.
Enter T-Zones in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Tap Manage existing connections under T-Mobile Data.
Tap on the Proxy Settings tab.
Tap to check This network connects to the Internet.
Tap to check This network uses a proxy server to connect to the Internet.
Enter 216.155.165.050 in the Proxy server field.
Tap Advanced...
Tap HTTP.
Enter 8080 in the Port field.
Tap OK four times.
Tap Start.
Tap Internet Explorer.
Browse to http://wap.t-zones.com.
Tap Menu.
Tap Tools and tap Options...
Tap Use Current under Home page.
Tap OK.
The new WAP profile is now configured and ready for use. "
http://tmobileuspublic.wdsglobal.com/phonefirst?phoneId=0&manufacturerId=0&ispId=&mmsId=&wapId=&contractId=235&countryId=37&networkId=90&bearerId=5&phoneId=1805&manufacturerId=41&mobileNumber=&incomingServerId=
another thing you can do is copy the contents of your extended rom on the wing onto a storage card on your new device. also copy the "config" text file so that you install the CAB files in the proper order. reset. try now, I hope this helps
S.V.I said:
another thing you can do is copy the contents of your extended rom on the wing onto a storage card on your new device. also copy the "config" text file so that you install the CAB files in the proper order. reset. try now, I hope this helps
Click to expand...
Click to collapse
Did all of the above settings, didn't do a thing. Still same connection issue. When you go to IE and enter an address, it says "connecting... locating... opening..." and just sticks on "opening" for the page, MSN Live doesn't work or anything else either. This is all strange since it was all working fine only a few days ago.
There is some magic setting or something that is making Hermes devices not work anymore while the wing still does.
I DIDNT do the extended rom thing, would you mind explaining that a little further step by step for me?
If those settings don't work it sounds to me like something is corrupted on your phone, and you may need to do a hard reset, or installing a new rom. I haven't had any issues with Schaps 4.31 since I installed it 2 weeks ago, but it sounds like you might be.
I have 2 8525's, lol... didn't work on EITHER even with a fresh install of schaps, I even tried 4.4 with win mo 6.1 just for jollies. It's really strange though and as I said, multiple people in my area are reporting this same issue at this moment.
But I just think they made changes that a certain setting or something on the hermes doesn't like since it works on the Wing.
In fact, it's quite pissing me off, lol... really frustrating.
I would call t-mobile and find out from them. my 8525 works just fine.
yeah but you are in a different part of the country, it's actually people with Kaisers (Tilt) having the issue as well... it's the TyTn and TyTn II models that just magically aren't working, and it's all south florida. Those t-mobile bastards!
But really, the freakin Wing works, what could it possibly be!!!!!
8525 in South Florida (Miami) with same issue
As always, when I have problems with my phones I turn to xda developers and viola! Answer's to my questions. My at&t 8525 internet stopped working around 8pm Thursday night (2/7/08). I have had my T-mobile sim on this phone working fine since last July with not one problem until now. I actually did call t-mobile customer service and went through all the usual treat the customer like a dummy and tell him/her to restart, take out battery, etc etc like that never occurred to me to try...DUH! Then they tell me to talk to the IT dept at my work to see about active sync settings. And of course they do not know that I AM the senior engineer in the IT dept so I get the rare privilege to inform them of this and assure them that there is NOTHING wrong with my exchange server as everyone else in the office using active sync has no problems, it is only me on T-mobile with my unlocked 8525. They then offered to transfer me to tier 2 support. Which gave me another rare opportunity to use one of my favorite lines with customer support..... "I just want to talk to someone who knows more than me". Unfortunately work took me away from the phone and I did not get a chance to continue with tier 2 support. I will take this up later today and post any resolutions if they present themselves. But I am putting my money on this forum and the incredibly talented individuals who frequent here on a resolution to this issue instead of T-mobile. Seems to me T-mobile is sending a hidden message that they possibly do not want my business anymore. Good thing my contract us up in a few months.
Thanks to all in advance!
vr24 said:
yeah but you are in a different part of the country, it's actually people with Kaisers (Tilt) having the issue as well... it's the TyTn and TyTn II models that just magically aren't working, and it's all south florida. Those t-mobile bastards!
But really, the freakin Wing works, what could it possibly be!!!!!
Click to expand...
Click to collapse
It's possible that the wing, since its a T-Mobile phone probably has some sort of network priority list the 8525 doesnt. try selecting under Phone > networks Tmobile and see if it sticks. Good luck!
Perhaps you should try flashing another radio. I used one a while back and could not get data working.
that's very interesting, as we are probably ALL using the same unlocked radio. Can you possibly point me in the right direction on how to do that?
radio version
I'm using Radio version 1.51. I will try flashing to the latest and see how that goes, but let me tell ya, looking at the new schap's rom I'm thinking I might just flash that bad boy, It looks awesome!
Seumas said:
I'm using Radio version 1.51. I will try flashing to the latest and see how that goes, but let me tell ya, looking at the new schap's rom I'm thinking I might just flash that bad boy, It looks awesome!
Click to expand...
Click to collapse
The 4.4? It's ok, I didn't notice a huge difference, and it actually seemed to run a bit slower, although I didn't have a chance to test it much.
I went to my device information, and it says radio version 1.16 - so I guess we are running different radio's and having the same issue... maybe that isn't the solution then. Could it have somethign to do with hard-spl and having it unlocked and what not?
Ok so tried 5 different radio versions, all with zero success. Ugh!!
If you are an MDA user in the US and have issues connecting to your internet and MMS:
http://forum.xda-developers.com/showthread.php?t=294573
I use this rom to fix my service. period. I just dont know how else to fix that issue.
All the other ROMs have not fixed the issues I have been having after upgrading my phone to WM6. The Rom By it self eats the batery, so Faria's Kitchen has a great little extra package in the extended rom: "Xfaria settings"
FIXED the battery drain issue.
WIZARD G3 (TMO MDA US) WM6 pro from Here:
http://forum.xda-developers.com/showthread.php?t=294573
Radio: official 2.25
IPL/SPL: 2.26
Xfaria Settings
How recent was your internet not working? And can we just install Wizard roms onto an 8525 hermes?
We are going to keep this down to 1 thread I think, we have one going pretty well on the Kaiser forum (TyTn 2) and the South Florida guys with that model are having the exact same issues.
Head over there and we can keep this all together and try and find a solution.
http://forum.xda-developers.com/showthread.php?p=1907694#post1907694
Does anyone has unlimited access to Web, emails with T-Mobile Web $5.99 hacked working properly?
Please help, I can't access to Internet
Adavid
Timely question as I have been wrestling with the very same issue for the past 36 hours.
My phone also has the RW 6.1 ROM and I activated T-Zones a day and a half ago. I've followed the hack instructions on "dashapps" to the letter, booted and rebooted several times, yet no internet. I either get a "$MESSAGE$..." or "you cannot access.." message when I try to connect.
I read on another HTC (non-Excalibur) board that T-Mobile has closed this loophole: can anyone definitively verify? There's a member here -- JDOGG*** something that says he works for TMo, so maybe he knows for sure.
I hate to be the noob that asks the same question that's been answered a dozen times, but... I've scoured this board and followed all the hack instructions EXACTLY -- several times -- and still no luck, so I'm at a loss for solutions.
Any and all guidance is genuinely appreciated. Thank you.
i've had the $5.99 working for quite some time working with:
autosync/exchange
iris browser/pocket IE
IM+ (IM program)
VNC viewer
also, i'm using 6.1 & followed the dashapps hack w/ no issues. not sure what else to tell you guys.
Yes, the $5.99 proxy hack doesn't work in some regions (usually those with the highest data traffic.) For everyone else, it works perfectly, with the exception of a few apps that aren't proxy aware.
A related question which may help solve my issue:
Within "Connections" there are two GPRS choices: #5, "GPRS Settings" and #6, "GPRS". For "GPRS Settings" I have the option of authenticating using PAP or CHAP: which do I use?
Also, is there a preferred setting for "Disconnect GPRS When Dropped"? (Preferred in the sense that it may effect my ability to connect to the internet.)
Thanks again.
Minnesinger said:
A related question which may help solve my issue:
Within "Connections" there are two GPRS choices: #5, "GPRS Settings" and #6, "GPRS". For "GPRS Settings" I have the option of authenticating using PAP or CHAP: which do I use?
Also, is there a preferred setting for "Disconnect GPRS When Dropped"? (Preferred in the sense that it may effect my ability to connect to the internet.)
Thanks again.
Click to expand...
Click to collapse
Just double checked my settings for you. I have it listed as CHAP, Hold Connection and checked GPRS Auto Attach. GPRS Auto Detach is not checked. Hope that helps, in St. Paul the settings work just fine.
hello can anybody confirm if they're in Miami, FL. and this hack works,
thanks in advance
i live in ft. lauderdale pretty close to miami and it works fine.
$5.99 Setting for WM6.1.....URGENT
ralph1o1 cal you write it down your phone set up?
I called T-mobile Yesterday to do the setting and the Lady toll me that I have to get the $19.99 plan to get access with WM6.1, I'm pretty sure a few peoples of "T-mobile support" doesn't have a idea when you change OS doesn't come with the original phone.
If you can bring me the setting I appreciated.
By the way..I went back to WM6 to try and I had access to T-Zones thru "winwap" but I didn't have the $5.99 plan to try it.
adavid
I Love Wm6.1 And I Don't Want Go Back.............
Please Help To Set Up Internet With $5.99 Plan
:d
My GPRS is set to PAP, but the other settings mentioned are the same. Here are my settings:
Under GPRS, I have three connections:
The first and third are labeled T-Mobile Data and T-Mobile WModem Link and are both setup the same:
Connects to: WAP Network
Access Point: wap.voicestream.com
Other settings are blank, except for the DNS entries are all 0.0.0.0.
The second connection is labeled T-Mobile MMS:
Connects to: Work
Access Point: wap.voicestream.com
Other settings are blank, except for the DNS entries are all 0.0.0.0.
Now onto the proxies...I have two setup:
Tzones Proxy:
Connects from: WAP Network
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
Username and Password are both blank.
Tzones Proxy2:
Connects from: Work
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
Username and Password are both blank.
I live in Ohio and it works all over the state and Michigan, if that matters at all.
Let us know if these settings work for you.
http://wiki.xda-developers.com/index.php?pagename=HTC_Excalibur_WM61tzones
thats what my settings are and it works for me and also make sure you have the 5.99 on your plan lol.
adavid said:
ralph1o1 cal you write it down your phone set up?
I called T-mobile Yesterday to do the setting and the Lady toll me that I have to get the $19.99 plan to get access with WM6.1, I'm pretty sure a few peoples of "T-mobile support" doesn't have a idea when you change OS doesn't come with the original phone.
If you can bring me the setting I appreciated.
By the way..I went back to WM6 to try and I had access to T-Zones thru "winwap" but I didn't have the $5.99 plan to try it.
adavid
Click to expand...
Click to collapse
let me get this straight...you put a cooked copy of 6.1 on your phone....you then call tmobile and tell them that your new unsupported cooked rom wont let you access the whole net on the 5.99 hack plan like the wm6 did.
you do realize that the whole concept of what we are doing here has totally escaped you.
Yah just follow the instructions below and you should be able to access it.
Thanks guyz....
Thanks to you gauyz....jdoggraz and unasari1
I will try to setting on the phone.
I really wants to thanks to "ralph1o1".....
Your link works buddy...
Thanks
adavid said:
Your link works buddy...
Thanks
Click to expand...
Click to collapse
No problem anytime man.
do you know if goolge maps and the newly updated Live Search work with this hack, thanks
Other apps that might work
also Opera Mobile and Elecont Weather
dmd1272 said:
also Opera Mobile and Elecont Weather
Click to expand...
Click to collapse
opera mini works great with this plan
Hello,
is tried to install XDANdroid serveral times with different builds now.
It always worked fine, but i cant get data connection to work.
Yesterday i even did a hard-rset, formatted SD and installed th Froyo .cab:
h**p://forum.xda-developers.com/showthread.php?t=732362
My Network is O2 Germany.
I tried the to pre-installed APNs and also the APN settings i found on the internet:
APN: internet
other settings not set.
I tried to search in the forum and google... but no one seems to have such problem.
Can anybody help?
Bye
xcalibur_
I have had issues with this in the US. I was able to solve this by getting the settings from the O2 website under Data. Make sure that the proxy and apn settings reflect the website info. If that fails, contact O2 and ask for the data connection settings to be emailed to you. They have a long drawn out set up process, so this may be where you're hitting the brick wall - so to speak.