I've found that the FM radio it's always on "mono", if i switch the radio to stereo, nothing appened , just turn on on display "stereo" but the sound is still mono.
I own an O2 orbit and I have the same problem. The radio is mono even you select stereo.
I dont have this problem on my Orbit.
Once i select stereo mode it is in stereo mode with 3.7
Diesellolle said:
I've found that the FM radio it's always on "mono", if i switch the radio to stereo, nothing appened , just turn on on display "stereo" but the sound is still mono.
Click to expand...
Click to collapse
Before that u should check whether u r rx a stereo signal. if TX is mono then switching stereo will have no effect.
cheers
Rifaa said:
Before that u should check whether u r rx a stereo signal. if TX is mono then switching stereo will have no effect.
cheers
Click to expand...
Click to collapse
i'm sure that the signal is stereo and with the maximum signal..... the frequincies are the same that i was listening before with B&B 3.0.
Have the same problem, but I found that you need 4 or more bars in the signal strength before it swiches on the stereo mode.
jan1958 said:
Have the same problem, but I found that you need 4 or more bars in the signal strength before it swiches on the stereo mode.
Click to expand...
Click to collapse
the same problem with B&B 4.0.... and 5 bars of signal.
i don't think so cuz with the new B&B v4.0 rom everything works fine just the touch flo which has a little problem with.
now i can hear stereo only with the maximu signal, but the channel separation is really poor.... is not so stereo like an mp3.
ther're any program or sw to improve the radio??
Related
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
BigND said:
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
Click to expand...
Click to collapse
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
leon100 said:
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
Click to expand...
Click to collapse
1. I guess that AVRCP bt profile is NOT supported on Artemis by default. The question is what can be done to somehow add this profile to Artemis. Applying some patches or something...
2. I mean that no sound is received by the Jabra. Sound goes to either wired headset or built in speaker.
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae. Even so, I doubt sound will come to your BT headset. It just acts that way.
CHeers.
MasK said:
AVRCP IS supported by the Artemis.
Click to expand...
Click to collapse
Indeed it is. It was Mort player's problem. Last release version doesn't support control buttons, but final available beta does!
MasK said:
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Click to expand...
Click to collapse
Is is not ALL sounds, because radio sounds are not going in!
MasK said:
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae.
Click to expand...
Click to collapse
Sure thing I do plug the wired headset in. But sound goes to either built in speaker, or wired headset.
MasK said:
Even so, I doubt sound will come to your BT headset. It just acts that way.
Click to expand...
Click to collapse
I REALLY hope that there IS the way at least to redirect radio output to bt headset instead of built in speaker. Maybe registry tweak or some special software.
So research on this topic continues!
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
MasK said:
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
Click to expand...
Click to collapse
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
Well, I gave it a try, but didn't download Microsoft .NET Framework 2.0 yet. On fist try it doesn't do the trick Maybe because of lack of that MS thing. I'll get and try it later.
Thanks for helping anyways!
zen123 said:
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
Click to expand...
Click to collapse
Whoa.. the speeding up and slowing down is little.. but noticeable. I didn't know anyone else would notice it.. hehe
Yes.. I do have that.. it happens especially after the pause.
I set my BitPool value to "45".. which has very little noise, but hardly skips. The thing is, I feel that if I make sudden moves or go further than 2 metres without a straight line of sight, the music will get cut off
Higher bitPool value will increase quality, and pauses.
How about you? What is your bitPool value?
Set to 45 aswell also do notice a high freqency wail in the background.
zen123 said:
Set to 45 aswell also do notice a high freqency wail in the background.
Click to expand...
Click to collapse
Yes it does.. but I'm outdoors and commuting most of the time when using the headset, and thus that level doesnt bother me much. It's a balance I would say.. But could be better..
If you do find a good tweak to increase the bitPool without skipping, do lemme know
MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
I was looking for a way to do this, and this worked first time - thanks
I'm just using a mono headset - but it's fine
Hi.. i dont undestand why i need to plug my headset ind my HTC P3300 in order to hear radio on the phones speaker..?? - is there a way to set my device so that i can hear radio on the speaker without the headset??
Best Regards Michael
MicTh said:
i dont undestand why i need to plug my headset ind my HTC P3300 in order to hear radio on the phones speaker..??
Click to expand...
Click to collapse
Because the aerial (antenna) for the radio is contained within the headset. Without the aerial being connected, the radio would not receive a strong enough signal for you to be able to listen to it.
Yes it is possible to alter a value in the registry, so that the device believes the headset is plugged in when it isn't, but it's a pointless exercise as you can only recieve static and white noise on the FM app.
As discussed here.
Out of curiosity, with the headset connected and listening to the radio via the loudspeaker why does the device continue to output sound thru the headphones as well? Isn't this just a waste of power? Anyone know how to disable the headphones whent eh speaker is being used instead?
I'm using an Bt Midland in my helmet and i can hear music, navigator and also speacking and calling perfectly but i have not found the method to use the Radio trasmitter.
I've the adapter miniusb jack, and i've tried with some different software like Blue Music, Bta Router and a2dptoggle but nothing happens.
same trials in tc forum with even keeping the wired headset connected still no dice
on getting fm to the bt headset could be a hardware limitation
thank Rudegar.... i'm still searching fora any solution.... but is strange cause i cah hear the BT emitting the classical sound of "BIP" everytime i tap any things in FM Radio
I think you should give a try to BTAudio Toggle. This does not requires installation. Just copy to mobile open BT and run BTAudioToggle.exe.
thanks freco.... i've tried, but the radio dosen't transmitt.
as long as I know, you have to plug in the regular headset to be able to enable FM transmitter, because the headset is used as antenna. and then I would go for btIO, you would find it somewhere here for sure
...just my 2 cents
ies...headset are connected to mobile. i can hear sound from the speaker of headset and of mobile but it dosen't go in BT
...well, tried it at home and have to say that it doesn't work either. everything else is hearable on bluetooth exept radio...think that this is a FM transmitter-program problem. it seems that it's only able to play it trough speakers or wired headphones
aternem said:
...well, tried it at home and have to say that it doesn't work either. everything else is hearable on bluetooth exept radio...think that this is a FM transmitter-program problem. it seems that it's only able to play it trough speakers or wired headphones
Click to expand...
Click to collapse
yes, i think so.
i've asked here cause in other italian forums nobody has solved the problem.
Hi. Is there a way of playing TuneIn Radio through a bluetooth headset, or do you need headphones anyway for the jack to act as an antenna?
thanks
jswarb001 said:
Hi. Is there a way of playing TuneIn Radio through a bluetooth headset, or do you need headphones anyway for the jack to act as an intenna?
thanks
Click to expand...
Click to collapse
Don't know about bluetooth headset as I don't own one but I don't see any reason why not.
As for needing headphones, no, not needed as tunein radio is an internet radio so does not need an antenna only a data connection.
jswarb001 said:
Hi. Is there a way of playing TuneIn Radio through a bluetooth headset, or do you need headphones anyway for the jack to act as an antenna?
thanks
Click to expand...
Click to collapse
I am using it through a BT headset .
(even though sometimes I have connectivity issues, maybe due the wifi issues)
I use a gear4 bluetooth speaker with no problems.
Thanks how do you set it up to use the Bluetooth? I cant see a connection link specifically from the Tunein App.
I use turtle beach px5 works great except I sometimes have to mess with device settings for it to connect
1. Pair headset with fone
2. Click device and select allow media
Sent from my HTC One X using xda premium
Friends, I have a problem - FM radio (RN 8pro) When I plug in the headphones (as an antenna) - the headphones play stereo. But when I use BT headphones, the phone sends only a mono signal to the headphones. (If I use Xiaomi mi max2 then everything is OK - same procedure - same headphones). Internet radio and players in BT headphones are stereo. In both cases, the headphones are like an antenna in the mobile
So I did the factory settings and then wipe, unfortunately FM radio when playing bluethooth playing mono. Perhaps some update will fix what you have RN8pro really plays in bt headphones stereo? Easy test, play the same station as internet radio and then fm.
Sorry for bad English, maybe you will understand the problem.
There is a setting for bluetooth audio to use mono in accessibility options. See there if that option is turned on.
The problem is that only FM radio over BT plays mono. Other players, youtube, play stereo. The problem will be the transmission of the stereo signal to BT from the FM radio. Everything is OK with MI MAX 2
RN8pro + headphones (antenna) FM radio- BT headphones - MONO,
MI max 2 + headphones (antenna) FM radio- BT headphones - stereo,
at identical settings and apk FM version
Oberon84 said:
There is a setting for bluetooth audio to use mono in accessibility options. See there if that option is turned on.
Click to expand...
Click to collapse
I don't want mono to play