Related
Not sure does anyone else have the same problem, I can't seem to log in VPN network through wifi in my school.
Tried bother Black Edn. v1.1 and v1.2, neither one can go through.
Anyone who succeed care to share the settings? I was told my log in ID or Password is wrong.
Or maybe it's the network which doesn't support WM6 yet?
Nobody uses VPN here?
I have the same issue, done a search and it appears that the TCP/IP stack is not binding with the VPN client software. This appears to be a general issue, I use the Checkpoint secure remote client but it also does not work with Cisco, maybe others. Unfortunately I do not know of a work round.
Malcolm
I have exactly the same issue with my WM6. I use the AT&T dialer on my laptop and try to connect over the umts connection created between my HTC Universal WM6 via usb connected to my laptop.
If you have any updates on this I would be grateful.
The goal of this thread is to get Vonage softphone accounts working with WM6 Internet Calling again. I'm going to use my cosmic moderation powers to delete without notice all posts that don't actually contribute to this effort. I don't want any "how do I set up provisioning..." posts cluttering up this thread. If you are having this issue, please respond to the poll so Vonage can get an idea of the affected XDA posters. If you answer no, then please post here! TMK all Vonage softphone users are affected, so you would be one of a kind.
To aid with troubleshooting, I'm also willing to (temporarily) share my Vonage softphone provisioning information with trusted SIP gurus who wish to participate. Post here if you're interested.
Ok, Here's what we know:
Sometime during the week of June 18th, Vonage softphone accounts stopped working on all WM6 builds that had Internet calling activated
SJPhone however, continues to function normally.
WM6 Internet calling still functions normally with other SIP service providers.
Given this information, I installed the Airscanner packet sniffer on my Tytn. The 30 day free trial for this sniffer can be found here. This nifty little utility creates packet captures that can be read by Ethereal. The current version of Ethereal is located here.
I next attached Airscanner to the IEEE 802.11b/g Compatible WiFi adaptor on my TyTN, connected to my home AP and turned my TyTN's phone radio off. Then I proceeded to capture the sip initiation sessions with SJPhone (worked fine) and WM6 Internet Calling (showed "No Service" after long "Searching" delay). Everybody who wants to participate in this exercise should connect this way btw. Let's not cloud the troubleshooting effort with the ideosyncracies of 3G connectivity.
Here are the relevant packet captures (click images for full size versions in new browser windows)
Internet Calling Registration Packet
SJPhone Registration Packet
Initial Analysis
As it turns out, the SIP register packet sent by Internet calling is being ignored by Vonage's SIP servers at sphone.vopr.vonage.net:5061. WM6 Internet Calling retrys the original Registration request 11 times then gives up. However, the registration packet is immediately accepted when sent by SJPhone. This points to a formatting issue with Internet calling's SIP Registration packet.
SJPhone is also sending a binding request to the SoftJoys STUN server but you can clearly see that the response from Vonage is occuring directly directly after the STUN bind request and is in response to the original UDP packet and not the STUN bind packet (response from softjoys is not shown but is further down in the conversation). Conclusion: STUN isn't the reason why SJPhone is succeeding here.
So it would appear to be something in the REGISTER request itself. Here are the differences I've noticed:
the REGISTER sip URI contains the :5061 port suffix in SJPhone and not in WM6. However, both programs are sending the request to port 5061 at sphone.vopr.vonage.net. This probably isn't the issue
the source port for SJPhone is 5060 and for WM6 its 1153. This may be the issue IMO. Perhaps Vonage added firewall rules that restrict outbound connections to known SIP ports. I'm working on coming up with a way to test this currently.
the contact binding information is completely different between WM6 and SJPhone. Could this be an issue? Any SIP gurus out there, feel free to comment!
Is anybody seeing anything else here?
Next steps:
Once we've identified the likely causes for the failure, I will get on the phone with Vonage technical and go over our findings. I may even link them to this thread. Hopefully the outcome will be a quick change to Vonage's firewalls or SIP servers. Also, it would be nice to find out more about WM provisioning/registry settings to handle these:
How to provision STUN servers
How to force the source port from a random 1000-2000 to 5060. BTW: setting the enableport5060 value to a 1 doesn't change this. It merely causes Internet Calling to start listening on port 5060.
Let's get this issue solved so Vonage Softphone accounts can once again work with Windows Mobile!
... or we Vonage users could just close our accounts and just install asterisk or use a different service that works I guess...
One of our posters has already engaged Vonage Customer care & told them to use this thread as a reference. Hopefully we'll get an answer on this ITNF.
I've added a poll to determine affected users. If you have a Vonage Softphone account, please respond!
I recently upgraded my tytn to WM6 and was about to get Vonage for my phone, and i found your post saying it wont work so i set out on a long search of the internet for a possible solution. Below is a link to a blog entry at MSDN which talks about making voip work with vonage on wm6. Can you try it and let me know if it works?
http://blogs.msdn.com/cenet/archive...-rtc-voip-functionality-work-with-vonage.aspx
Interesting link. I wonder how one sets the RTC initialization flags in the ipphonecanvas client ?
Well, I set up a Trixbox ([email protected]) PBX using the nerdvittles virtual appliance & then trunked it to my Vonage softphone account. Then I set up a remote extension and provisioned my TyTN to attach to my PBX. After an afternoon tuning NAT, everything now works just swimmingly. Even 3G works, and I hnow ave audio in both directions too! Based on this, I believe that the issue lies in the way Internet Calling sets up the contact portion of the register packet that is causing the Vonage SIP servers to error out. This is why I never get a response, not even an error response, to my REGISTER packets
I've got three bugs to eliminate in my asterisk configuration and once they are fixed I'm thinking that I have a workaround.
Final response from Vonage:
We understand from your email that you are experience problems using the SoftPhone with Windows Mobile 6.
The SoftPhone application was designed to be used with a PC and not a Pocket PC running Windows mobile. I have pasted the link below that will provide the PC requirements needed to use the SoftPhone.
http://vonage.com/help.php?category=153&nav=5
If you have any questions, your Vonage team is available to assist you 24 hours a day, 7 days a week. Contact us whenever and however it suits you!
Click to expand...
Click to collapse
Based on this, it is clear Vonage doesn't want to deal with the root cause of this issue. Too bad, IMO because there's a vast plethora of WM6 devices now out there which could connect to Vonage services if this was resolved. Business lost for Vonage it would seem.
Based on their response, my advice for Vonage users would be to close your softphone accounts & find a more suitable provider such as sipphone.com. FTTB the asterisk solution is a (very usable) workaround but there's no guarantee that Vonage won't shut that down in the same manner.
Any new update which u can share with us ?
the problem i have now is i can make calls , but i can't receive any incoming since vonage did something .
I used it on my pda and worked ok .
if u find any please update this thread
glad i found this thread, i was racking my brain as to why this wasnt working... i only just got a TyTn to replace my POS HP 6915, so naturally I got a WM6 rom for it mainly for using my Vonage Softphone through the voip feature.... great
i guess if vonage are wiping their hands off it the only thing to do is see what somes in the way of updates from M$ ?
or someone to do a bit of reverse engineering?
Just found this thread...
... after struggling all weekend. I am presuming that there's been no progress on solving the problem with the WM6 client. Damn shame Vonage doesn't want to play nicely.
I see uninstallation in my future.
Dan
On another related note, in order to used the WM6VoIP.cab files, does the device need to be application unlocked?
Thanks!
Dan
I just cant resist let me in
HELLO GOVERNOR LONG TIME NO MIND TO BUG
BRING ME UP TO SPEED IT WORKED AND THEN STOPPED SO LETS GO OUTSIDE THE BOX. IT WORKS IT JUST NEEDS TO BE REMINDED THAT IT IS WORKING NOT TWEAKED TOLD TO NOT REGISTER. IT WORKS CAUSE IT WORKED ONCE SO FIND WHERE IT IS STOPPING IT SELF.
ANY WAYS IF ITS OK IM IN JUST NEED SOFT PHONE APP WHAT DEVICE I SHOULD USE (GOT THE\M ALL) AND LETS SEE IF WE CANT BEAT A PREVENTION TACTIC FROM 2 GUYS THAT COPIED A FOREIGN SOLUTION.
IM BACK ONLY FOR U CHIEF
Hope I'm not committing a faux pas by bumping this, but I haven't been able to find any up-to-date information on this anywhere. Has anyone solved this problem? Or did everyone give up?
I just switched to Vonage, and added Softphone without realizing that no one has a current method of connecting to it with WinMo (via apps or native VOIP support), so I'd really like to get it working
Part of my work in network administration is to locate and deal with "rogue" access points that might comprimise network security. Currently I'm using a Sharp Zaurus with Kismet to do this, but I don't always carry it with me and I DO always have my Cingular/AT&T 8525. I basically need a program that will capture all packets from the air into a file that can later be analyzed with Wireshark (Ethereal).
Yesterday I did a search of the Hermes threads looking for such a program and found several for MW5 and TyTn, (which I assume is another Hermes phone). None of them work, because they can't/don't put my WIFI interface into promiscuous mode.
From what I have read, it seems that the wireless drivers are the key here. I'm currently running ROM version vp3G 3.0.0 with Radio 1.41.00.10, which I downloaded from a link found here. Previously I had used several others of the excellent WM6 ROMs available on this forum, but never tried using the 8525 as a sniffer with any of them.
Question: Does anyone know of a ROM/software configuration for the 8525 that will allow promiscuous sniffing of WI-FI networks?
TIA
Walt
Damn, u want your phone to launch missles or something too?
yea and i want an tool to sniff the password of wpa-psk TKIP
thats where the best moment of my life.
Long as we are making requests, I need a packet sniffer that works for the gprs radio of my phone, not the wifi radio. Is there such a creature?
I am no pro at wifi sniffing, but this program had a promiscuous mode, I think.
http://www.airscanner.com/downloads/sniffer/sniffer.html
Long as we are making requests, I need a packet sniffer that works for the gprs radio of my phone, not the wifi radio. Is there such a creature?
I am no pro at wifi sniffing, but this program had a promiscuous mode, I think.
http://www.airscanner.com/downloads/...r/sniffer.html
Yesterday 12:23 PM
Click to expand...
Click to collapse
Now that WOULD be cool! Maybe illegal? Would sniffing data from a cellular connection be the same thing as a cellular wiretap?
I did try AirScanner, and it's a great sniffer, but it won't put the wireless I/F into promiscuous mode, so I can only look at packets addressed to my device.
What I'm really trying to learn here, missles notwithstanding ;D is whether or not this is a hardware limitation. If not, then I will continue to look for software and/or ROM drivers that will work.
Walt
try aircrack
larsuck said:
Long as we are making requests, I need a packet sniffer that works for the gprs radio of my phone, not the wifi radio. Is there such a creature?
Click to expand...
Click to collapse
Not sure what you'd achieve, as encryption is negotiated between each SIM and its authorising server. Intermediate equipment only gets to see the encrypted stream. Even if your chipset was capable of full-time reception, your battery would go down a lot quicker, and all you'd see is how many channels and timeslots are in use, if that!
I need to sniff the ip info of my data connection. I have tried almost every other means of getting it and am at my wits end. I figured it was probably encoded, but at this point I am grasping at straws.
I have used VXsniffer before (http://www.cambridgevx.com) on one of my Ipaq PDAs and it worked great but that was about 2 years ago. I have not been able to find any intrusive "sniffing" programs that have worked on my Tytn but there are tools out there that work with the current ROMs (VP3G's and Schaps) that are like Ministumbler and will show you AP locations. (Wififofum and SniffThis come to mind) They have their bugs but in general they work.
I searched for days when I first got my Tytn for an intrusive sniffer and never found anything.
Brad
I've used WiFiFoFum and Mini Stumbler (off-shoot of network stumbler). I can't say from memory if they do promiscuous or just passive scanning, but both produce results that can be analyzed in NetStumbler or Ethereal.
-Steve
walts said:
Part of my work in network administration is to locate and deal with "rogue" access points that might comprimise network security. Currently I'm using a Sharp Zaurus with Kismet to do this, but I don't always carry it with me and I DO always have my Cingular/AT&T 8525. I basically need a program that will capture all packets from the air into a file that can later be analyzed with Wireshark (Ethereal).
Yesterday I did a search of the Hermes threads looking for such a program and found several for MW5 and TyTn, (which I assume is another Hermes phone). None of them work, because they can't/don't put my WIFI interface into promiscuous mode.
From what I have read, it seems that the wireless drivers are the key here. I'm currently running ROM version vp3G 3.0.0 with Radio 1.41.00.10, which I downloaded from a link found here. Previously I had used several others of the excellent WM6 ROMs available on this forum, but never tried using the 8525 as a sniffer with any of them.
Question: Does anyone know of a ROM/software configuration for the 8525 that will allow promiscuous sniffing of WI-FI networks?
TIA
Walt
Click to expand...
Click to collapse
I have never heard of promisc mode being possible on any WM device. I believe i've read that it is in fact a hardware limitation. but who knows, with all the hacked drivers that float around maybe someone will get around this.
now that i mention it... it could be sufficient to disassemble the wireless drivers / ip stack (they are NOT on the radio rom) and NOP out the function that checks the mac address. or change the branch instruction at the end of it to "always execute" as if it were matching the device's own mac address. hmm. it wouldn't be true promisc mode, but it could work.
think i might give it a go myself.
in the mean time, if youre concerned about rogue APs on your network, check out my recent post about my discovery of how to enable Internet Sharing over WiFi (turns the phone into an Access Point):
http://forum.xda-developers.com/showthread.php?t=332360
not directly related, but might be of interest.
fluxist
larsuck said:
I need to sniff the ip info of my data connection. I have tried almost every other means of getting it and am at my wits end. I figured it was probably encoded, but at this point I am grasping at straws.
Click to expand...
Click to collapse
Tried vxIPConfig from Cambridge (http://www.cambridgevx.com) ?
gregnash said:
Tried vxIPConfig from Cambridge (http://www.cambridgevx.comhttp://www.cam.com) ?
Click to expand...
Click to collapse
Looks like it could be a winner. Since I do not know enough of the teck behind it all, if someone tries this out and it works out, report back your findings for the rest of us
GB
walts said:
Question: Does anyone know of a ROM/software configuration for the 8525 that will allow promiscuous sniffing of WI-FI networks?
Click to expand...
Click to collapse
For trinity and hermes, I've found nothing. Drivers... you know
But Airscanner is the best, I'm using it on an Ipaq...
Ciao
larsuck said:
I need to sniff the ip info of my data connection. I have tried almost every other means of getting it and am at my wits end. I figured it was probably encoded, but at this point I am grasping at straws.
Click to expand...
Click to collapse
try to tether and run www.speedtest.net unless your network is on a proxy
from your computer it will be easy to dermine the IP. www.speedtest.com is easy because it tels your speed + ip and carrier connection
gemblaster said:
Looks like it could be a winner. Since I do not know enough of the teck behind it all, if someone tries this out and it works out, report back your findings for the rest of us
GB
Click to expand...
Click to collapse
vxIPConfig is not a packet sniffing tool like Wireshark (Ethereal) or the like. It gives you "ipconfig /release" and "ipconfig /renew" functions and can give you TCP, UDP and IP stats but can’t actually capture the packets and view the encapsulation headers.
AirScanner and vxSniffer are the only 2 moderately priced utilities that can do that for WindowsMobile that I am aware of.
Park City said:
vxIPConfig is not a packet sniffing tool like Wireshark (Ethereal) or the like. It gives you "ipconfig /release" and "ipconfig /renew" functions and can give you TCP, UDP and IP stats but can’t actually capture the packets and view the encapsulation headers.
AirScanner and vxSniffer are the only 2 moderately priced utilities that can do that for WindowsMobile that I am aware of.
Click to expand...
Click to collapse
Just checked those two out and our Hermes WiFi adapter doesn't support promiscuous mode
Memnoch30 said:
Just checked those two out and our Hermes WiFi adapter doesn't support promiscuous mode
Click to expand...
Click to collapse
Is there anyone that understands the inner workings of our WiFi adaptors and drivers that may be able to shed some light if there would be a hack that would make our Hermes compatable with these programs? If so then maybe the search could be over . So far this looks like the closest it's come.
Sniffing
I also am in the field of network security.
I use Wififofum for searching and logging all wireless networks. It has filters such as show only non secure etc. It also has GPS log support. You can then convert the log files to upload as a overlay on google earth.
Airscanner works great on the trinity as a packet sniffer of the wireless.
Just my 2cents
It doesn't matter how many programs you try it won't work. Promiscuous mode is being prevented by the driver. The only possible work around would be if someone made a new driver using an open source driver. Since HTC has not released any open source drivers for their device I see no possible solution.
Hi Guy,
Mabey I am just too stupid but I can't get my Voice over IP using Schaps WM6 on a Tytn.
My Provider ist 1und1, in Shaps VoIp setting I enterd,
Prov Name: 1und1.de
User Acount: (My VoIp Number)
Password: Did it
Registrar Address: sip.1und1.de
Left the port as ist was
Proxy address: 1und1.de
Left the port,
So for the Uri addres it Says,
sipmy number)@sip.1und1.de
When I am at home on my Wifi the Home plug in says No Connection,
If I aktivate 3G it connects but I cannot place a Call.
On other Wifi's I use it does not work eighther,
What can I do to Make it work?
Thx,
Chris
No one with any Help?
Is there any Obvious errors in My setup?
Is there A program I can use instead?
Grüsse,
Chris
VoIP error
Hi SchillDie, regarding your VoIP error, I think is quite difficult to make it work on WM6. I'm using pfingo to configure my Dopod 838 Pro still no luck till now. I've give up on that. Only nokia works well in internet phone & is very clear. I was impress by it's conversation. Anyway good luck in your VoIP.
Just a quick question, has anyone gotten the inbuilt "Internet Calling" WM SIP client working on the TP2?
I've been reading all of the threads that I can find on this site to do with SIP, VoIP etc... and trying to get the InternetCalling app working on my TP2. I'm currently running Sergio's Cell Pro V11 ROM, but I've also tried it on the NRG Phoenix ROMs.
It seems that no matter what VoIP setup cab I use to install the client and it's constituent parts, no matter what registry settings I alter, and no matter what SIP provider I try, it always ends up at "No Service" after "Searching".
I just wondered if anyone had experience of getting it to work, either over Wifi, or over 3G?
I've also investigated whether the problem is that Vodafone UK block SIP traffic on their network, but I've not come across anything to say if they do conclusively one way or another?
I am getting the same problem, I think I am not using the right SIP server. On one of the tutorials it tells me to use my SIP server. I am with Telus but I don't know what the sip server is.
Same here. I could not get internal SIP working.
And fring is a resource hog. There is another software (talkonaut), but I don't have enough experience on that one.