Ok guys so I tried to upgrade to the Aus wm6 and keep getting the ERROR [260] : CONNECTION on my computer and on my device is displaying the red, green, blue, and white screen with the words:
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
I have already tried the normal of unplugging, rebooting, taking out card, and still nothing. I was using AXl's latest rom. Can someone please help before I decide to use my device as a projectile.
THanks,
Mauricio
I'd take a look at http://www.trinityguides.info/
turcomora said:
Ok guys so I tried to upgrade to the Aus wm6 and keep getting the ERROR [260] : CONNECTION on my computer and on my device is displaying the red, green, blue, and white screen with the words:
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
I have already tried the normal of unplugging, rebooting, taking out card, and still nothing. I was using AXl's latest rom. Can someone please help before I decide to use my device as a projectile.
THanks,
Mauricio
Click to expand...
Click to collapse
yeah, try the guide first. i had problems updating to official ROM when i was running crash-proof spl as well. is yours an australian Dopod? or other device? If australian device, then don't manually enter bootloader, just run the update. If not australian device, use a modified RUU to flash it. You could also try running SSPL first.
Mine is a european htc p3600 that is cid unlocked. I will try that thanks.
Mauricio
ok, you can follow the non-dopod upgrade instructions on my site. there is a link to modified RUU (although i think it's SEA rom).. you could always switch the ANZ nbh file in so that you get the ANZ rom, if you really care between the two
Related
Hello,
I executed the Hard SPL cab and went into bootloader or some sort of a multi colored screen which says IPL - 0.50 Trin100 and underneath it says SPL 3.03.0000. It connects to my computer and says USB but when I attempt to flash the new WM6 rom which I just downloaded from the rapidshare it resets the machine and continues to remain on this screen of multi colored stuff. I cannot seem to get out of it no matter what I do. What do i need to do to abort the multi colored screen or allow it to flash my HTC trinity with the Dopod WM6 rom?
Thanks,
Gilbert
PS: please don't shoot me if this was discussed elsewhere. i searched and could not fine anyting
happened to me yesterday.
with this screen install AGAIN the hard....
see
http://forum.xda-developers.com/showthread.php?t=316113
and
http://forum.xda-developers.com/showthread.php?t=312499 -page 45
How? I try to execute again the Hard SPL file and it gives me an error and says close window on PC.
Thanks,
Gilbert
it keeps giving me error in connection and i think i bricked my phone i tried to reinstall several times and i get the same results. Poor me.
Same hapen to me, then ive tried to instal over it a another rom and it came to life.
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
racerx_ said:
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
Click to expand...
Click to collapse
Thanks for your help. I get Error 260:
The update utility cannot connect to your pda. please check usb is connected. click exit to quit.
When I try to run the upgrade alone in XP it starts at 1% then resets the bootloader.
Thanks,
Gilbert
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
racerx_ said:
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
Click to expand...
Click to collapse
I am trying to upgrade the
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship but i also tried to reflash the 1.23 HTC rom with GPS to see if it would flash since my device is an HTC trinity and not dopod but the same thing keeps happening.
Try to flash PDAVIET version, my came to life doing this
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
No matter what i do, what rom i try to flash i get the same damn error message: Error 260 - Connection!!! I am connected so I don't what is wrong with it. I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
racerx_ said:
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
Click to expand...
Click to collapse
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
hmmm... i'm not familiar with that SPL number... unless somehow that got halfway updated with the WM6 update.
I think you better head to that thread and try the stack exploit. Did you try loading a cooked ROM to see what happens?
that is it. i give up. i am not experienced in messing with codes. i am going to retire the device for good and use a regular phone. this is crap. thanks for ur help.
oh, that is the SPL version of the new ROM... i guess you weren't using hard spl when you tried to flash it?
ha, well don't give up too quick.. that's one expensive retired device you've got there.
Just keep cool and you should try to install an official Rom to downgrade this SPL !!
Gilbert said:
I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
Click to expand...
Click to collapse
Help!
My bootloader is showing the following:
Trin100
IPL-1.00
Trin100
SPL-9.99.CP
When upgrading with the new released WM6 ROM, it keeps failing at 28%
Please help!
best bet for you, is load a different ROM now. Either cooked or official. That will get your device out of crash-proof spl bootloader.
Once the ROM is loaded, if you want to try the official wm6 again, run SSPL first and see if it'll work for you
p.s. i pm'd you my handphone number in case you've got trouble still..
Gilbert said:
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
Click to expand...
Click to collapse
Hi Gilbert,
Im having exactly the same problem as you. Right now im in the middle of flashing it back down to WM5 (its working at the moment at 17%).
Hopefully after this i will be able to flash back to WM6 (Most probably will go back to AX3L for now).
Hope this helps you out (im quite stressed about it too!)
Edit: I have just finished flashing to Official WM5, now flashing back to AX3L WM6. It works!
Hello All,
I think I lost my HTC Trinity P3600 device :-( I was trying to update INDIGO_LITE & upgrade failed during half way and I rebooted the device & now it only boot to white screen. If I try to reload another rom it's keep saying rom is corrupted.
Any help will be really appricated
Thanks,
Ankito
k a few questions for you..
1) did you have hard-spl installed?
2) can you enter bootloader manually?
3) have you tried to flash an official ROM from you manufacturer? (WM5 or something)
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
ankitoberoi said:
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
Click to expand...
Click to collapse
Hello,
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
Bye
so it's an HTC product? look at the wiki, or logon to HTC's website to download the latest ROM for your device and region (europe, asia, etc).
What i meant was did you have hard-spl installed before you flashed, but i'm guessing not since you have the new bootloader. You really need to read up and protect your device before you flash.
Try to find an official ROM and see if that works first..
Thx jotam
Phone start working again. Do you guys recommand any 6.0 rom which I should use? Should I wait for HTC to come up with offical rom?
Thanks,
Ankit Oberoi
htc has official rom already.. just try and see what you like, but pdaviet and indigo are good for me.
make sure you have hard spl installed before you flash again. You can follow the guides here if in doubt.
Hi all, have floated around the forum for a definitive but not really got my question answered, so here goes....
I have several V1605 Vodafone Hermes/Tytn devices in our organisation that i would like to upgrade to WM6, as the Voda default rom is appalling.
I have upgraded 2 or 3 to Black Majik etc, but i want to upgrade the rest from the default voda to HTC official, however i get the following:
A, INvalid vendor ID on one device
B, Connection error on another
In A, is there a custom ruu package with a non vendor specific ID, although i dont see why.
B, Flumoxed, goes to Bootloader flix on and on, even for a split second shows the grey screen and a progress bar, then Connection error.
Err, anyone got any clues?
TIA
lokidan said:
I have upgraded 2 or 3 to Black Majik etc, but i want to upgrade the rest from the default voda to HTC official, however i get the following:
A, INvalid vendor ID on one device
B, Connection error on another
In A, is there a custom ruu package with a non vendor specific ID, although i dont see why.
B, Flumoxed, goes to Bootloader flix on and on, even for a split second shows the grey screen and a progress bar, then Connection error.
Err, anyone got any clues?
TIA
Click to expand...
Click to collapse
For the A question, in this post http://forum.xda-developers.com/showpost.php?p=1410956&postcount=82 you can find WWE version with CustomRRU. Take care to have the last HardSPL before flash. You can flash the Radio ROM in second stage. If you want other languaje, in the thread you can find more if you take time to read it
For the B question, can be an USB issue (cable or USB port on the PC). Try on other PC and other cable.
Various errors - part 2
Thanks for A, however B, i have tried on several different machines still the same error, its weird and i have never seen one like this before....
Thanks
hard spl users guid
jcespi2005, ran through the guide for hard spl, failded.
it runs, places the device in to boot loader then fails with connection error.
Using Vista machine with latest drivers etc..
Any help?
lokidan said:
jcespi2005, ran through the guide for hard spl, failded.
it runs, places the device in to boot loader then fails with connection error.
Using Vista machine with latest drivers etc..
Any help?
Click to expand...
Click to collapse
Try to use a XP box instead a Vista one, and select SSPL to install HardSPL. This must work.
no
It doesnt, however if failed, but my spl is now 2.03
both custom ruu and official rom fail on error 260
Hi,
If these are Vodafone devices are they unlocked? If they are still locked then you will have to unlock them first then install Hard SPL 2.10 Olipro before attempting what you want to do.
Have a look in the wiki; its all in there. Feel free to come back if you need more help.
Good luck.
WB
....that was my next question....
So i unlock them first?
~clearly i do.....
~Will give it a go...
one done...
one of them is now unlocked and upgraded...Thanks.
The other has an ipl of 1.00 and an spl 2.03
can this be unlocked with the unlock tool and then upgraded or do i downgrade the spl?
Thanks all....
I am trying to udate my M700 to Hard SPL 1.20. I follow the steps as per the trinity guides. I get to the screen where it says update the ROM Version from 1.23.61.5 to 1.20. I click on next and it says you are ready to update your ROM image. I click on next again and the screen for showing the % of update done when the device resets itself to the screen showing TRIN100 IPL-SSPL by Des and SPL-1.07.ds. However, the update screen changes to error code #246 device not responding and loses activesysnc connection. I also have exactly the same problem when trying to update the Radio as well.
repoman1966 said:
I am trying to udate my M700 to Hard SPL 1.20. I follow the steps as per the trinity guides. I get to the screen where it says update the ROM Version from 1.23.61.5 to 1.20. I click on next and it says you are ready to update your ROM image. I click on next again and the screen for showing the % of update done when the device resets itself to the screen showing TRIN100 IPL-SSPL by Des and SPL-1.07.ds. However, the update screen changes to error code #246 device not responding and loses activesysnc connection. I also have exactly the same problem when trying to update the Radio as well.
Click to expand...
Click to collapse
When you see the error code, DO NOT TOUCH the pda, just restart the Rom update utility program!
Everything will be ok!
Thanks for that, was able to install hard spl 1.2, sim/cid unlock as well as update radio to version 1.5. How can I check that my CID is actually unlocked?
repoman1966 said:
Thanks for that, was able to install hard spl 1.2, sim/cid unlock as well as update radio to version 1.5. How can I check that my CID is actually unlocked?
Click to expand...
Click to collapse
If you have hard-spl, you do not need cid-unlock. Hard spl will ignore CID check during flash....
Thanx guy's. Works!!. started the update again after the error message.
I am stuck onto bootlooder screen and never update
i update my spv m700 to windows 6.1 but it fine. and few day ago i try to windows 6.1 elegent addition but it stops in the middle of screen and i reboot again but it struct onto bootloader screen. can any body help me.
ok. im using the "REPACKAGED DOPOD WM6 3.54.707.3 Official" file on the page, http://forum.xda-developers.com/showthread.php?p=3663061#post3663061
which is a SSPL ROM flasher i think.
i pick force using SSPL because that's what the AutoDetect told me to do, then pushed yes on my phone to start it.
when it got to where my phone has the red, green, blue, and white screen i wait. It then says on my computer, "ERROR [260] Update Error
What exactly am I doing wrong?
Did you flash Hard SPL before? I think it should fix your problem. Just have a look into the Hermes upgrading forum and you will find it
how do i flash it
ryanrecycles said:
how do i flash it
Click to expand...
Click to collapse
It will have an ruu that only has one choice. It's the best thing you can do to your phone.
Hard-SPL, Or How to Not Brick Your PDA Ever Again And Fix Bad Blocks!