Unable To flash update Orange SPV M700 - P3600 ROM Development

I am trying to udate my M700 to Hard SPL 1.20. I follow the steps as per the trinity guides. I get to the screen where it says update the ROM Version from 1.23.61.5 to 1.20. I click on next and it says you are ready to update your ROM image. I click on next again and the screen for showing the % of update done when the device resets itself to the screen showing TRIN100 IPL-SSPL by Des and SPL-1.07.ds. However, the update screen changes to error code #246 device not responding and loses activesysnc connection. I also have exactly the same problem when trying to update the Radio as well.

repoman1966 said:
I am trying to udate my M700 to Hard SPL 1.20. I follow the steps as per the trinity guides. I get to the screen where it says update the ROM Version from 1.23.61.5 to 1.20. I click on next and it says you are ready to update your ROM image. I click on next again and the screen for showing the % of update done when the device resets itself to the screen showing TRIN100 IPL-SSPL by Des and SPL-1.07.ds. However, the update screen changes to error code #246 device not responding and loses activesysnc connection. I also have exactly the same problem when trying to update the Radio as well.
Click to expand...
Click to collapse
When you see the error code, DO NOT TOUCH the pda, just restart the Rom update utility program!
Everything will be ok!

Thanks for that, was able to install hard spl 1.2, sim/cid unlock as well as update radio to version 1.5. How can I check that my CID is actually unlocked?

repoman1966 said:
Thanks for that, was able to install hard spl 1.2, sim/cid unlock as well as update radio to version 1.5. How can I check that my CID is actually unlocked?
Click to expand...
Click to collapse
If you have hard-spl, you do not need cid-unlock. Hard spl will ignore CID check during flash....

Thanx guy's. Works!!. started the update again after the error message.

I am stuck onto bootlooder screen and never update
i update my spv m700 to windows 6.1 but it fine. and few day ago i try to windows 6.1 elegent addition but it stops in the middle of screen and i reboot again but it struct onto bootloader screen. can any body help me.

Related

Warning to Universal Users !!! Do not upgrade to AKU2 if....

Read here:-
http://www.msmobilenews.com/page/1223/
Re: Warning to Universal Users !!! Do not upgrade to AKU2 if
"Warning to Universal Users !!! Do not upgrade to AKU2 if you have bootloader v0.56 on your device, DO NOT upgrade to an AKU2 or you will turn it into a paperweight!
To check your bootloader, hold the light key, power key and press the reset button. If it says v1.00 then you don't need to worry. If it says v0.56, you must not upgrade to AKU2. If you do, the only way to fix it is to flash back to a pre-AKU2 rom or upgrade your bootloader to v1.00 (which is currenty not possible publically).
How do I know this? Personal experience and a good friend with a lot of technical know-how."
just to let you know, i've edited the article to expand on what actually happened and how i came to find that out
I have a 0.6 boot loader
Will 0.6 boot loader upgrade to the new rom or not?
I have 0.6 Bootloader and newest Qtek rom works fine.
Me too....3 Unis, all of them hv 0.6 and are running latest O2 ROM...
Once again I reapt..while flashing I hv always put them in Bootloader mode manually first and then flashed...always
sh!t
Great... just ran the update on my XDA Exec (not sure about my bootloader version), after the phone rebooted during the first mins, I got an error msg on the PC.
Now the phone won't power up, not even show any light indications when charger plugged!
Damn!
I have the problem because i have this rom and spent a lot of time to try to flash the new AKU2 rom.
I sent a post HERE
but nobody answer :evil:
And HERE
Have some responses
And now what can I do to uprade my bootloader to 1.00 ?
if you stack on Bootloader, possiblity of recover it by this post.
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
if stack on the SPlash Screen, seems to be no solution now.
My Exec also stucked Splash. Bootloader Ver.1.0
My Jasjar Bootloader Ver0.60 is still alive, sometimes stucked on Bootloader after flash ROM, but can escape with the tool on that link
Thank but I don't enderstand, my Universal is working well on old rom but not with AKU2 rom.
Now I have to change the bootloader version ton 1.00
Do you know how ?
Thanks
SEB152030 said:
Thank but I don't enderstand, my Universal is working well on old rom but not with AKU2 rom.
Now I have to change the bootloader version ton 1.00
Do you know how ?
Thanks
Click to expand...
Click to collapse
so, i think,, just think and guess, V0.60 is better than Ver1.0.
Many guys had troubles in V1.0.
How to get 1.0 bootloader, i can not find the way yet.
my exec was got it when flash some ROM, but can not find wich.
also Buzz reported MTTY.exe Task 32 command can back up Bootloader and Flash, i tried it but it was said "no permission task" and can not.
http://buzzdev.net/content/view/64/115/
[Universal] How to 'd2s' dump the ROM
Written by buzz_lightyear
Wednesday, 07 December 2005
Dump Bootloader:
USB>task 32
USB>d2s 70000000 80000
OS ROM + splash:
USB>d2s 70100000 3FA0000
XtendedROM:
USB>d2s 74100000 A00000
Radio ROM:
USB>d2s 60000000 a24200
Bootloader 1.0 Update
Look for this:
http://forum.xda-developers.com/viewtopic.php?t=48590
Bootloader 1.0 Update
Look for this:
http://forum.xda-developers.com/viewtopic.php?t=48590
what is "light key" ??
I'm a newb, i saw the update for AKU2 ROM...but i dont know how to find out what version I have on my phone...
what is a "light key"
Re: what is "light key" ??
here is another link to 1.01 bootloader
ftp://ftp.clubimate.com/JASJAR_BL1.01_RUU_V1.2.zip
I have not tried it.
HTC sais that you need to upgrade to it from 1.0 if you don't see text "Serial V1.0" on screen after entering bootloader. Though bootloader works fine even without this message.
I can confirm the freezing on bootscren is still there evern after ugradation to 1.01..don't know why...I guess a bad DOC...but if it is a bad DOC then why it accepts the flash?

Stuck In BootLoader After Trying To Install D810 Official ROM

Hi All,
My P3600 is stuck in bootloader after trying to install the official D810 ROM. I used the CID unlock install first, which seemed to work fine, I then tried to install the D810 ROM and it looked like it was working, but stopped at 28% with some kind of communications problem. Recovery does not work... it displays the progress bar, but then goes straight back to the rainbow bootloader screen.
Any help or suggestions appreciated.
Thanks
Rael
Phew... got it working. I removed the battery and replaced, boot loader was still displayed, and then ran the old official WM5 update which seemed to progress from 0 to 100% sucessfully.
Thanks
Rael
Your phone was relocked by the update, and I'm guessing you don't have an actual D810 that's supposed to get this update. The best method to flash this is to follow my post here:
http://forum.xda-developers.com/showthread.php?t=316410
oops, you can use hard SPL in this link:
http://forum.xda-developers.com/showthread.php?t=299659
i got the problem like you when i upgrade my device to wm6 officiel.
After you flash hard SPL Olipro, you can use PC to flash again another rom you like.
(sorry for my worth english)...
People just do NOT know how to read...sigh.

Do I need to CID unlock

I'm a bit confused here I have managed to flash my o2 orbit from the factory o2 wm6 to wm6 premium plus rom, everything worked fine. Then I tried to flash to black & blue 4.3, I got a 302 error, I went through the recovery process and the same happened again. I managed to get the factory rom from the o2 website and it flashes fine every time but whenever I try to flash with any other rom even the premium plus which worked before, I get the 302 error, do I need to CID Unlock it? I'm stuck, Any help would be much appreciated.
lj-_- said:
I'm a bit confused here I have managed to flash my o2 orbit from the factory o2 wm6 to wm6 premium plus rom, everything worked fine. Then I tried to flash to black & blue 4.3, I got a 302 error, I went through the recovery process and the same happened again. I managed to get the factory rom from the o2 website and it flashes fine every time but whenever I try to flash with any other rom even the premium plus which worked before, I get the 302 error, do I need to CID Unlock it? I'm stuck, Any help would be much appreciated.
Click to expand...
Click to collapse
You must run USPL to flash other ROM than your original. If you flash other roms than supplied with your device, you must CID unlock your bootloader and then will be everything fine.
This is why I am confused, how come the wm6 premium plus rom worked first time and now it dosn't . I use the uspl utility first like I did the first time, the spl then changes to 1.11.0000, then I do the rom update. I didn't do a cid unlock the first time but it worked. My brother has the same o2 xda and has also updated to the wm6 premium plus rom from the factory rom, but never did a cid unlock either.
Yes it is a bit strange, but you have to try use the uspl tool again and again, in some version of uspl i hade succes on 5. try. Or look for other version of USPL, maybe you have the old one.
True, I'll try another uspl. How can I tell if it's a new one? I take it I'm doing the procedure correctly ( Run USPL once, then reset, then install rom) ? or run uspl more than once ?
No, run just once, if succesfull the device will reboot, wait untill the activesync will connect to your device and than run romupdate.When possible after the reboot turn to fly mode and wait till activesync will be syncronised with the device and this time run the update.
Thanks for the help mate, I'll keep on trying that
about uspl
hey wat is uspl and from where u can download this utility for wizard ! i m having the same 302 error while flashing a crossbow rom , active sync dont detect my fone now its been bricked n stuked on bootloader screen ! plz help
z0d1ak said:
hey wat is uspl and from where u can download this utility for wizard ! i m having the same 302 error while flashing a crossbow rom , active sync dont detect my fone now its been bricked n stuked on bootloader screen ! plz help
Click to expand...
Click to collapse
Try to search the forum, you will find the uspl tool. If you see the color screen, you can flash just your original rom version.

Flashing HardSPL problem

Just got a refurbished 8525 with WM5 and I want to upgrade it to WM6. So, I plug the phone into my PC, let Activesync do its thing and run the RUUWrapper.exe file and select all the appropriate things in the dialog boxes, and the bootloader starts at 0% and right away the dialog box on the computer comes up and says "Congratulations...." as if it was done. Mind you, it never got off 0%.
What could the problem be? I already tried a hard reset.
Its a very small data transfer so might have completed fast. Go to bootloader mode and check your IPL and SPL versions.
I wish I did look and it is still the stock bootloader. It literally jumps from 0 right to 100, no progress bar incrementing, nothing.
which version you are trying v7 or v9? v7 worked for me always.
Version 7. I have used this before on a previous 8525 and it worked as well. I don't know what is different about this phone that is not allowing it to be flashed with a new bootloader.
Eh, nevermind. I just went into bootloader mode and now it says "SPL-2.10.Olipro".
IPL still says "IPL-1.04", this is correct right?
this is correct
Rockford_622 said:
Eh, nevermind. I just went into bootloader mode and now it says "SPL-2.10.Olipro".
IPL still says "IPL-1.04", this is correct right?
Click to expand...
Click to collapse
HardSPL does not change the IPL, so that is correct (I believe).
I appreciate it, thanks!
l3v5y said:
HardSPL does not change the IPL, so that is correct (I believe).
Click to expand...
Click to collapse
HardSPL updates the IPL to 1.04 if it isnt already, after flashing it the bootloader wont allow SPL/IPL changes incase theres a dodgy IPL out there (which is just as lethal as a dodgy SPL). Oli added this feature after a dodgy IPL was posted last year.

Upgading to 1.93 ROM

Hello all my fisrt post,
I am trying to upgrade to RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
but everytime i go through the process it stay at 0%. I want to know what spl do i need to install in order to update to the 1.93. i recently added hard spl sign and upgraded to version 1.37.
thank you
I put 1.93Olinex in my device and then it worked,. I had the same problem as you have, my flash succeed after chance the hardspl
thank you so much i have looked for this for a long time
I had a small problem:
I want to upgrade ROM from 1.35.401.3 to 1.93.401.2...
I download the official .exe from HTC:
Diamond-QMR-RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
using the S/N from the back of my PDA
... it work till 34%, then it appears UPDATE ERROR:284
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode."
What do you recommend to do?
Yes, you should "Upgayd"
zyborg said:
Yes, you should "Upgayd"
Click to expand...
Click to collapse
I'm afraid I don't understand...
I repeated the process 3 or 4 times and got the same error...

Categories

Resources