Guys please help me out here cause i am going bonkers.
A friend of mine gave me a brand new Plantronics VBH 300 blue tooth headset.i managed to pair it with my xda exec ,and was working fine.however when i switched it off in te evening and on again the next day,although it is recognized by pda,i cannot answer calls through it .when a call comes in the headset icon is displayed on the exec screen however even though i press the accept calls button nothing happens.i have to soft reset both the pda and the headset to be able to take calls.However after a while on standby ,the story repeats itself.
any ideas guys please
Related
Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------
Hi!
I have i mate JasJar, but there are some problems which are a bit annoying and I will ask you if you can help
Does anybody have problems using BT Jabra 500 working with Jasjar?
I cant hear any of my incoming/outgoing calls nor can I hear a ringing in BT.
Jasjar discover BT and pairing is OK ( just in case I did couple times -no luck)
when I use answer/end button on BT is dialing out but no sound on BT
on other side that I call they can hear my voice but I can't hear anything
Do I need any software to instal in jasjar ???
ROM version 1.13.53 WWE
ROM date 09\23\05
Radio version 1.03.01
Protocol version 42.36.P8
ExRom version 1.13.137 WWE
Please help me out
Thanx
I have BT 500 and have no problems, it sounds like the headset has a problem not the phone.
Also have my own and a client's Jabra 500 working successfully with o2 Xda Execs.
Stupid question I know, but you have tried increasing the volume on the headset buttons?
I did try everything , volume etc , contact jabra and try there sugestion
such as :
could be a pairing issue, or a bad speaker on the BT500. Please try a reset and re-pair of the phone and headset first:
Turn the headset off.
Plug the headset charging cord into a wall outlet.
Connect the headset to the charging cord for 5 seconds.
Disconnect the headset.
Remove the headset from the phone Bluetooth menu.
Turn the phone off.
Remove the battery (and sim card, if removable), and hold out for 5 seconds.
Re-install the battery (and sim card, if applicable) and turn the phone on, but do not touch any settings.
Turn the headset on.
Put the headset into pairing mode by pressing and holding the pairing button until you see a steady blue light. Release the button.
Perform the pairing procedure for the phone.
SIMPLY IS NOT WORKING
try with friend V3 razor and same thing
I also have the BT 500 + jasjar
It just works better than the BT 250 which was my past one.
To be honest, what I have on my jasjar is the new O2 rom upgrade (and that should not do any difference) I think there is something wrong with your jasjar
Maybe you will be forced to try the bad solution HARDREST try the headset with other phones before doing that
i beleive it's the headset that has the problem, since you tried it with another phone.
i have the bt500 with the imate jasjar and also the kjam and it's more than perfect for me, the sound is cristal clear on all the phones i tried on.
maybe you should replace it with a new one.
What I mean is not a factory mistake in the headset
I think the phoen is getting complex and some data have been lost (possible)
By the way, I haven't installed the BT headset fix, yet it works fine.
Hi all,
I have been reading about the HTC Universal for a long time, but only became an owner on Monday.
I am having real trouble getting my o2 xda exec to work with my motorola HT820 bluetooth headset!
My problem is that the headset button does not trigger voice dialing.
What happens is this...
I press the headset button for a short beep and nothing!
I press it again for a short beep and my head set seems to connect to the phone and all sounds go through the headset.
But the button STILL does not trigger voice dialer.
The other thing that seems to work is that I press and hold the headset button and the phone automatically dials the last number to be dialed on the phone.
I am pulling my hair out and I cant think what the hell is wrong
I heard that the two devices made a great combination, but I can not get it to work yet.
Can anyone shine a light on my darkest hour?
P.S.
In case it makes a difference somehow, I am not an o2 customer and am with Vodafone. Because of this I removed the o2 active UI software by giving my device a hard reset and chosing a co-operate install.
I did not think this would cause any problems as I heard it was all garbage to do with o2 networks only.
Please guys this is driving me nuts!
Has anybody been through this?
I searched the boards and have not found anything
I can work on it tomorrow for as long as it takes, but I just do not have the faintest idea where to start.
Just wanted to say that I managed to get this working in the end by first using the bluetooth off cab file and then after a soft reset using the bluetooth on cab file.
Both from this thread:
http://forum.xda-developers.com/vie...stdays=0&postorder=asc&highlight=hack&start=0
I even have voice cmd working with contacts and everything!!!
I am a happy guy
Danny
ulic3190 said:
Just wanted to say that I managed to get this working in the end by first using the bluetooth off cab file and then after a soft reset using the bluetooth on cab file.
Both from this thread:
http://forum.xda-developers.com/vie...stdays=0&postorder=asc&highlight=hack&start=0
I even have voice cmd working with contacts and everything!!!
I am a happy guy
Danny
Click to expand...
Click to collapse
nice to hear, just bought a HT820 myself yesterday as finally a SHIPPING ROM with A2DP came out (QTEK weeee)
Have a problem, when i play music, i just hear the first second then it cuts out.
Also in bluetooth settings when i click/hold the stylus on the HT820 icon, i get options to set as either Wireless headset or Handsfree. Isn't this supposed to be automatic? Which do I set it to?
THanks...
Please help!
I am having problems with my blue tooth handsfree and my O2 XDA IIi.
The Xda recognises, connects and is paired with the headset and vice versa. However when connected, all I can hear is static through the head set.
I have tried the headset on another phone and it works fine, also have tried friends headsets on XDA and again only static can be heard.
Any advice would be gratefully received!!!
Ah hah! I'm back and a happy bunny!!! Managed to work it out all by my little self. - If you cold reboot the XDAii by holding down the power button at the same time as pressing the reset, when you restore, the handsfree kit works!!!
Probably really simple to some of you high techies out there but I'm proud of me!!!
In fact, what are you doing is hard reboot the PDA and cause all the program run into manufacturer setting and it will cost all your program and setting lost.
I'm facing this issues before. Whereby, all type of bluetooth is not functioning although that able to recognize by PDA. At the same time, when incoming call received, the ringing tone will like inconsistent/jerking.
It's due to database problem .....
Hello Everyone,
i am a proud owner of the S9 bluetooth headset and it worked very well at the beginning (1 day). Than i deletes 2 registry settings as mentioned in a forum somewhere (max bit pool stuff) to get better sound quality.
I dont know if it is the cause of the problem i got now but next day the S9 was gone in the bluetooth device list of my touch dual and cant be found anymore. the strange thing about it is that if i press the telephone button on the S9 the ms voice command icon appears and i can talk to it. also the touch dual seems to use the s9 as headset as the ring tone volume is switched to zero and the headset icon appears in the calling screen (after pressing the send button)
anyway i am not able to conect the s9 for music transfer and that is the problem if got..
any chance to delete the touch dual in the s9 settings so it allows a repairing? or somehow recovering the appearance of the s9 in the device list of the ppc?
any suggestions are welcome.. nice sunday everone
Edit:
Problem solved.. dont know how but the pocket pc found the headset finally again..
Glad that it works again for you.
I have a Blueangle with WM 6.1 and the S9.
Can you get yours to play music and have the display off (not dimmed but off). I have found a device lock that works fine while BT is off however when BT is on and connected to the S9 it always wakes up the screen.
What Version of WM are you running ??
Oops, sounds like my yet-to-be-solved case.
What I have: Qtek 9100 and Jabra BT250v. Some time ago I also deleted this partnership (don`t ask why) and when tried to re-establish it again, the device kept declining the connection with the headset. The device finds the headset, asks for a password and whatever combination of digits I enter it rejects to establish a new partnership.
I guess, the problem is in registry. Anyone could help with this one? What should I fix in a registry to re-pair the headset and device? Thanks in advance.
Ok in case anyone else got that problem i guess i know what it caused: i paired the bluetooth headset with my laptop after pairing it with the pocket pc. and although no service could be used (ms bluetooth stack) the S9 didnt use the PPC as standard music device but the laptop. after deleting the pairing from the laptop the S9 i could pair it to the ppc again.
about MDAIIIUser's problem: dont know any way of listening to music with the device turned off. i use AE Button to switch display off by double cklicking the green button or starting S2U2 by double clicking the red one. anyway, if display is switched off and i press a button on the bluetooth headset the display turns on again thats why i just lock the device and dont care if the display is on for some minutes in my pocket..