Develop Bugs

Official WM6 & SSPL?

i have UK Orange M700,
i have flashed successfully twice using SSPL with LVSW & mUn 2.00.S.E!
is it possible to flash to official WM6 using SSPL? like i have already done

Was creating a new thread REALLY necessary? When there's at least 2-3 others about this...

darkjedi said:
Was creating a new thread REALLY necessary? When there's at least 2-3 others about this...
Click to expand...
Click to collapse
But the only answers seem to be "flash HardSPL" & official WM5 rom, which i dont have being on Orange M700!
i want to be able to flash using SSPL straight from 1 cooked Rom to another.
p.s. i'll make sure i P.M. you before i start another thread!

goodie said:
is it possible to flash to official WM6 using SSPL?
Click to expand...
Click to collapse
No it isn't, here's the answer:
The "official" WM6 rom NBH file has the OS part tagged as 0x401 (256Mb NAND) instead of 0x400 (128Mb NAND). Only the new SPL-3.03 included in this "official" upgrade is able to understand 0x401, so SSPL, HardSPL or CrashProof SPL or whatever that's not based on this SPL-3.03 (or newer) will not be able to understand the NBH header type 0x401 and will stop at OS flashing.
The solution is simple:
Unpack the NBH and repack it tagging OS as 0x400, then flash it using SSPL, or whatever hacked SPL choice we have.

i've never tried unpacking an NBH or retagging!
is this something the knowledgeable cooks on here will manage easily?

one moment and I'll post a safe and re-tagged file for all.

Shadowmite said:
one moment and I'll post a safe and re-tagged file for all.
Click to expand...
Click to collapse
thanks, i appreciate the offer, but i think i will wait for a cooked Rom with HTC homeplug, audiomanager & no slow down?
apparently the only way to get HTC apps with no slow down is to have them cooked into a rom?

Just CID unlock your phone, it works just fine.

Using SSPL-TRIN.exe or have you got to CID unlock?

With Pof's CID Unlocker. Has worked for me, and my friend.

pof said:
No it isn't, here's the answer:
The "official" WM6 rom NBH file has the OS part tagged as 0x401 (256Mb NAND) instead of 0x400 (128Mb NAND). Only the new SPL-3.03 included in this "official" upgrade is able to understand 0x401, so SSPL, HardSPL or CrashProof SPL or whatever that's not based on this SPL-3.03 (or newer) will not be able to understand the NBH header type 0x401 and will stop at OS flashing.
The solution is simple:
Unpack the NBH and repack it tagging OS as 0x400, then flash it using SSPL, or whatever hacked SPL choice we have.
Click to expand...
Click to collapse
good
my device is dopod 810 eng ver (HK). I flashed it to chinese ver WM5 before using SSPL. For WM6, i have no problem flashing to SEA ver. But always get invalid vendor ID for the Trad. Chinese rom.
I then tried to unpack and pack it again with 128MB size.
and work like a charm
thanks all!!

h0228631 said:
good
my device is dopod 810 eng ver (HK). I flashed it to chinese ver WM5 before using SSPL. For WM6, i have no problem flashing to SEA ver. But always get invalid vendor ID for the Trad. Chinese rom.
I then tried to unpack and pack it again with 128MB size.
and work like a charm
thanks all!!
Click to expand...
Click to collapse
May I know how to repack the file with 128MB size?

HELP NEEDED: Have IPL-1.01, SPL-1.01. Want to update to WM6 official.

I just bought a Cingular 8525 and would like to update it with the "official" Cingular dump. I posted a problem on another thread and was told that I had a debug device. My bootloader info are as follows:
HERM100
IPL-1.01
HERM100 MFG
SPL-1.01
The only way for me to upgrade is if I use HardSPLv7 but im also reading that you cannot update to official roms if you have HardSPL. What should I do?

ishtangli said:
....The only way for me to upgrade is if I use HardSPLv7 but im also reading that you cannot update to official roms if you have HardSPL....
Click to expand...
Click to collapse
nice, flash hardspl.
mfg chief

mrvanx said:
may i reiterate again, the RUU in the official version WILL NOT work if you have updated to HardSPLv7 (which is HIGHLY RECOMMENDED).
Therefor you need to use the repackaged version i uploaded to rapidshare and megaupload.
RapidShare
MegaUpload
Click to expand...
Click to collapse
There is no repackaged version of the official Cingular Rom and that's what I want to flash. I hope you understand the problem.

EDIT: Post removed by me.

IPL-1.00 upgrade available now from the latest official WM6 Dopod!

ausdim (Senior Member) has extract the new version IPL-1.00 included in the latest WM6 Dopod ROM.
I've just upgrade my IPL-050 to IPL-1.00. No problem. Works fine.

Why would you update the ipl?
I mean what's the benefit ?

Why not?
RacerII said:
Why would you update the ipl?
I mean what's the benefit ?
Click to expand...
Click to collapse
And why not?
Older version was 0.50 and newest is 1.00.
That's all.
After upgrade IPL version 1.00, my Trinity work always fine.
Filicloe.

I said it before and I'll say it again, flashing the ipl is a un-needed risk, do not do it unless you need to or have a update-addiction problem. If anything goes wrong on the ipl flash there is NO WAY to recover... Better safe then sorry.

"NO WAY to recover"
Shadowmite said:
I said it before and I'll say it again, flashing the ipl is a un-needed risk, do not do it unless you need to or have a update-addiction problem. If anything goes wrong on the ipl flash there is NO WAY to recover... Better safe then sorry.
Click to expand...
Click to collapse
I already flash 3 Trinity: mine and two others. No problem. The upgrade IPL procedure is very fast (about 2 secunds).
Thanks again a lot at the senior member ausdim which extract the latest IPL version.
Dopod has release a new IPL version, and I think there is a reason. Why did they upgrade IPL? Only for the fun? It's not serious.
Now, my Trinity get the latest and official IPL, SPL (by Olipro) and Radio ROM.
Filicloe.

Hi,it's already included in the rom FR 3.1 cooking by Faman.

Marcdu81 said:
Hi,it's already included in the rom FR 3.1 cooking by Faman.
Click to expand...
Click to collapse
Yes. But I'm not using the ROM FAMAN 3.1.
See my signature below.
And this upgrade can be useful for those who are already in IPL-0.50 and want to change only the IPL Version (instead of flashing a complete ROM with IPL-SPL-RADIO ROM).
Filicloe.

Ok,I just give this information for 3.1 user's,so they don't need to flash with it if they don't know their IPL version.

what is the difference in versions guys??
why are we updating?

Difference between IPL-0.50 and IPL-1.00?
mhbr12742 said:
what is the difference in versions guys??
why are we updating?
Click to expand...
Click to collapse
That's a very good question!
But NOBODY know which is (are) the difference(s) between the IPL-0.50 and IPL-1.0.
We can only be sure that's the newest version.
Filicloe.

filicloe said:
But NOBODY know which is (are) the difference(s) between the IPL-0.50 and IPL-1.0.
Click to expand...
Click to collapse
which is a good reason not to risk your device for no reason..

Exactly why NO ONE should flash this, maybe this ipl blocks the spl from being modified? Maybe you just implemented some other anti-rom changing code they have yet to turn on... Granted this is a extreme example and most likely not the case, but you have a working device, and are running non OEM roms, it's best to leave the ipl at what was working as it's the most dangerous flash possible on our devices.
More than likely the ipl update fixes a few rare scenarios which might need a reset and/or hard reset to fix the device.

Silly question i know... But what is the IPL for? what does it do?

- IPL :
the IPL (Initial Program Loader) with for role of all copying the contents of ROM SPL in RAM.
- SPL:
Once charged in RAM, the SPL (Secondary Program Loader) commonly called bootloader,charge the Radio ROM and OS in memory and to start the sequence of boot.
For the IPL and the SPL it is very strongly not recommended to update these ROM: for a majority of pda there are several versions of the internal components, and the updates are not compatible between different material because the sequences of starting are different. Moreover once the IPL and SPL upgraded, a return behind is not possible!

Shadowmite said:
Exactly why NO ONE should flash this, maybe this ipl blocks the spl from being modified? Maybe you just implemented some other anti-rom changing code they have yet to turn on... Granted this is a extreme example and most likely not the case, but you have a working device, and are running non OEM roms, it's best to leave the ipl at what was working as it's the most dangerous flash possible on our devices.
More than likely the ipl update fixes a few rare scenarios which might need a reset and/or hard reset to fix the device.
Click to expand...
Click to collapse
Dear Shadowmite
OK. Now I understand.
I will flash tomorrow morning the latest official HTC WM5 ROM (1.23.406.2) which restore the original IPL, SPL, RADIO, etc.
After that, I think my Trinity will not be yet SuperCID. No ?
So, are you agree with this procedure:
1- Remake my Trinity SuperCID with the Pof utility v1,
2- Flash SPL 1.30 Olipro
3- Flash Radio ROM 1.46.30.11
4- Update any WM6 ROM.
Please, tell me if this procedure is the best. (I'm sure that a lot of members of XDA-DEVELOPERS will be interested by your response)
Thanks by advance,
Filicloe.

HTC Diamond - Stock - German - 1.37.407.2 - ROM

HTC Diamond - Stock - German - 1.37.407.2 - ROM - http://uploaded.to/?id=foiclg
Enjoy!

Could s.o. pse make a rapidshare mirror? I can´t reach the site.
Tnx!
Diamir

+1
RS highly preferred

http://rapidshare.com/files/1278799...gned_Diamond_52.26a.25.09_1.00.25.03_Ship.exe

@tec007: Tnx a lot!
Anybody tried this ROM yet?

Any idea which radio this comes with ? Holding out for a better radio, as reception on current one (1.00.25.03) is really poor !

saquib said:
Any idea which radio this comes with ? Holding out for a better radio, as reception on current one (1.00.25.03) is really poor !
Click to expand...
Click to collapse
See the download name: 1.00.25.03

tupisdin said:
HTC Diamond - Stock - German - 1.37.407.2 - ROM - http://uploaded.to/?id=foiclg
Enjoy!
Click to expand...
Click to collapse
is this from HTC official? and Without HardSpl is it only for HTC diamond Germany(not for O2 Xda diamond)?

yesss. or you use hardspl and customruu.

http://uploaded.to/?id=foiclg
file not downloadable.
can you have a look on it, cause i didn't have access to rapidshare from my office.
thanks in advanced

Where did you get this ROM respectively why can I not download it at the HTC e-Club? Registered my phone and have a german HTC device

i have HTC Diamond von O2 , is it possible to update my xda with this Firmware? if yes how?
i have hardspl unsigned 1.40 i can use the european firmware but not this german, what i have to do ?
many thanks

This firmware is running on my Diamond since i bought it 1,5 weeks ago...
bought it 27th of june German HTC Diamond
runs fine for me...
Loko

i have a branded htc diamond of o2 i want to use this firmware without branding , i have to change something did someone do it successfully? how? i've done the hardspl 1.40 unsigned but it will not accept this firmware what i have to do else?
i can play the european htc firmware wwe but how can play this firmware to my htc

Sers,
I got an O2 branded device too, the problem with some roms is that they're containing SPL. So in this case the RUU tryes to flash the new SPL which is impossible because of the write protection of hard-SPL.
So you could extract the SPL from the .nbh which comes with this packet or you have to flash any rom which doesn't contain a SPL.
regards

What exactly is a (Hard)SPL? I din't got it fully.
BR Robert

demacus said:
Sers,
I got an O2 branded device too, the problem with some roms is that they're containing SPL. So in this case the RUU tryes to flash the new SPL which is impossible because of the write protection of hard-SPL.
So you could extract the SPL from the .nbh which comes with this packet or you have to flash any rom which doesn't contain a SPL.
regards
Click to expand...
Click to collapse
Hi
But how to extract the SPL from this .nbh? is there any tools?please give us more info.
i want to flash back to german , i can from
thanks.

I have the same problem...
How to extract..?
Thanks..
Michael

i wannt to install but the program tells me "ungültige Verkäufer-ID" (invalid vender-ID)
what do i have do to before installing?

Hey guys,
there are two ways to flash this rom if u got hard spl on your device.
1. should be the better one for u if u dont't really know what hard spl developer edition means:
flash back your device to stock spl 1.37 an then you will be able to flash stock images
2. use any diamond or kaiser kitchen to extract spl from nbh.
if you don't know how, please don't ask in a millions of threads about it - just search and read
regards

O2 XDA Diamond official ROM (German)

Here you are:
http://rapidshare.com/files/127970437/O2_XDA_Diamond_1.37_RUU.rar.html

perfect - thanks a lot for your support.
If you want to make it like the Stock XDA Diamond, first you have to flash spl 1.37 back.
regards
Anja31

Thx!
Yeah, thanks man!

you are my hero (4 2day)!!!

Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!

Thanks, it is nice to have an backup of the Orginal Rom.
Is it possible that you load on Mega?, with Rapid I have problems it said no DL Slot free.
Ghostrider

http://www.megaupload.com/?d=D5HWC22H

I recommend you use mediafire. Rapidshare is only 50Kb/s for non-premium users...

Brevi said:
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Click to expand...
Click to collapse
Yes there is a häuschen alongside the datum and above the uhr. A .cab is difficult since nobody investigated from where the information comes. maybe a system service like on previous models, maybe it's inside manila ...

thanks a lot.
Finally I can try some other roms without losing my guarantee.
A small guide or a link how to undo the HardSPL thing would be nice.
Greetings
iggboert

thanks a lot.
hier ist the guide to downgrade.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from post #39 in this thread.
2. download the package from post #2 in http://forum.xda-developers.com/showthread.php?t=400950 thread.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, replace the original .NBH in the package from post #2 with this SPL NBH.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.

sushilange said:
http://www.megaupload.com/?d=D5HWC22H
Click to expand...
Click to collapse
Thanks a lot

thx for the guide

is there a way to get the blue tf3d theme without reflashing my diamond? a solution like just replacing of the manlia.exe or something?
or can anyone upload me a copy of the manila.exe from the O²-Rom so i can try it myself?
regards
Fabian

Hallo!
I bought a 02 XDA diamond. But it is in German (windows 6.1). I would like to change the language from German to English. Does anyone can help me how to do this.
I have no idea what is ROM and so on. I am completely new to this process. Shall I have step by step instructions please?
Thank you in advance!
Greetings!
Sony

whats the deal-will we be getting a WWE O2 ROM anytime soon? I love the blue tf3d
anyone has any luck with a separate cab created for this ?

can anyone sign this for me to use?

anyone ????

First of all I want to thank the guys posting the "reflash" Instructions again and again, so I finally found them too. Since Im trying out a lot with my Diamond (Not my first WM device, but first with cooked rom) I appreciate it, that it is possible to get back for warranty reasons.
There is just one little thing that I am not sure about yet:
I know:
- instal unsigned Had SPL
- Flash stock Rom (O2 XDA DIAMOND in my case)
- Flash stock SPL (I found he package in the Post mentioned)
I dont know:
- wich of the three versions in that spl-package is the one i need???
I hope so can tell me even though i hopefully never have to try this procedure!
Thanks so far

Hi and thanks for your great work.
My request would be for a stock O2 WWE ROM 1.93 if this is possible?