Help needed: Extracting DLLs from a installation EXE file - Upgrading, Modifying and Unlocking

Hi all, wondering whether anyone can help me.
I have a old Atom Exec lying around, it suffers from problems waking up from standby only- it freezes occasionally. Basically at the time I had no other option but to upgrade to a Trinity. However, I noted that the Toshiba G900 seems to have EXACTLY the same problem, and I believe also the same processor, and Toshiba have just released a patch for it-
www.toshiba-europe.com/mobile/G900Patch.htm
A forum regarding the fault can also be found here.
http://www.pocketpcthoughts.com/forums/viewtopic.php?t=56041
Unfortunately a direct run of the exe file on my exec does not work. I was wondering whether anyone had a way of extracting the DLL or finding out from it how I can fix my Exec...
Thanks in advance to anyone who can help.

you can try to rename the exe file to zip and see if it's the kind that opens
i would not hold my breath though
there are 10000 reasons why a device could freeze
and trying to use a fix for such a general issue
made for another device seems like the mayor of badOddsVille

extracted dlls
extracted dlls

Thanks so much mate.

rickwyatt said:
extracted dlls
Click to expand...
Click to collapse
Didn't work.
Oh well.

yes didnt work

Related

Windows Media Player 10 MobileROM .nbf file found on HP site

Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
If some one can get the password for the rom, I can try to extract the cab.
I would try the same ones used for the MDAIII rom. itsme was the one that came up with the passwords.
Well paul, I'm not going to go fishing for them. So if you want to post them or pm me with them great otherwise. :arrow: :twisted:
HP ROM is not locked!
Guys,
I just opened the HP nk.nbf file and it is not locked, so no password is needed.
Mikee4fun,
Since it is unlocked, can you pull out the cab for the media player 10?
Instructions and names of tools would work also, thanks for any and all help.
Paul.
Re: Windows Media Player 10 MobileROM .nbf file found on HP
paulmc said:
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
Click to expand...
Click to collapse
I've been trying to download this file, but it always says file not found on the server...
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Re: Windows Media Player 10 MobileROM .nbf file found on HP
ZeroXtreme said:
I've been trying to download this file, but it always says file not found on the server...
Click to expand...
Click to collapse
This is no good. I've downloaded the SP29295.exe and dumprom the nbf file. It confirms my suspicion that it is an update of the HP iPAQ rx3700 OS files (including WMP10 mobile) and not just individual CAB files.
Unless someone can tell me what are the exact files in the WMP10? I've tested using other versions of ROM, and it seems like I've invariably replace files that affects the core integrity of the OS.
However, I still harbour the fantasy that we might port this stuff over to XDA2.
If you can't get to the right URL link, search at google with the following search string:
"HP iPAQ rx3700" "mobile media companion" update
My link:
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Paul, the windows media 10 is not a cab install rather a part of the windows mobile 2003 se system. It would require someone to go find all the dll files, registry setting and core file install directory contents to make the whole thing work.
Mike
twinkle said:
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Click to expand...
Click to collapse
Got it, thanks.
RE
Hope that somebody could come out with a cab file for separate installation.
:roll:
lets just hope someone can rip the entire se OS from another device and make it work on XDAII. The 2.02, 2.06 and 2.20.07CHS (translated) are getting their bit by bit...
any got wmp 10 from the rom then pls do share.
thanks
jeet
list the dll files u need and i'll help u to get them coz i have i-mate jam ROM and i'v extracted all rom filed includes all exe and dll files
all i need a list of needed files 8)
I think the lack of knowledge on the files pretaining to Windows Media Player 10 are ther reason why someone is going to have to have a copy of the ROM and go routing about for the files.
Loading rx3700 nbf file into ER2003Edit asks for a password. Is there any way to find that password?!
installing WMP 10 to XDAII
hi guys!
-can someone tell me,is it posible to install WMP 10 to myxdaII?
-Thank you in advance

Windows Media Player 10 Mobile

Microsoft have released Windows Media Player 10 Mobile but only to manufacturers. It is not, and will not be, available as an update or download unless your manufacturer provides an update or updated ROM.
I pulled a ROM update down from one of the OEMs whove done an update and could extract the files for WMP10M, but I'm not sufficiently up with the whole ROM cooking thing to incorporate them into a new ROM for my Blue Angel.
Anyone fancy giving this a go ?
Can you Zip the files and Upload here?
yeah, let the expert assist you.
I am very keen to have WMP 10 too.
just upload the ms.nbf file of that ROM and the rest is up to us.
This is a link to the ROM update for the Dell Axim x30 that contains WMP10 :
http://support.dell.com/support/dow...eviceid=6672&devlib=7&releaseid=R87096&p=HTTP
I downloaded this and used a tool (which I now cant find - doh!) to extract it.
What else would you guys need ?
Do you need a copy of my current ROM ?
If so, how do I make a copy of it ?
Sorry, that last post was me...forgot to login.
i have downloaded the file.
After extracting, i found 2 *.IMG :roll:
therefore, i try to use UltraISO or MagicISO just to extract *.IMG but it fails.
Some other experts may need to participate
I presume DumpRom will not help us.. Mamaich? :wink:
What kind of Pocket Pc have you upgraded? Dell ??
OK.
I got an iPAQ rom update from HP here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
I ran it so it copied the filees onto my PC hard drive.
I then ran dumprom.exe against the d2b10110uo.nbf file and got all the files from the ROM.
I have them all in a zip file as I am not sure exactly which ones are required for WMP10M. I have zipped up and attached all the ones that look as though they are WMP10M related.
i suppose all the files has to be zip into *.CAB
and copy over to PDA and unzip it
is this all the files that belongs to WMP?
i think let the expert do some testing
bravo2zero said:
just upload the ms.nbf file of that ROM and the rest is up to us.
Click to expand...
Click to collapse
Sorry, I must hve missed your comment. The rom can be got from here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
Sorry, tried to upload but it keeps failing.
Anyone tried copying the files in wm.zip to their xda2 and trying to run wmplayer.exe ?
wanna try but at work with no cradle
Locked up after a few seconds of the "wait" icon on my PDA2K running 1.31 WWE and 1.06.02 Radio.
First you are missing many WmFiles,there are many that are not begin to Wmxxxx,but unfortunately I can't remeber others.
And I think DumpRom is missing relocation on Dll files,like discussed time ago
I thought someone had mentioned that WMP10 software is "somehow" tied into the hardware or the OS specific to the devices so it wouldnt be possible to extract the executable application and make a cab or whatever and run it on any other devices that it didnt ship with...
I'm no guru with ROMs and stuff.. but if any one of you guys manages to make this work, it will be awesome!
Good luck!
i heard someone had the cab or a way to install wmp10 ... anyone here knows how?

Updating OEMDrivers

Hello All,
I'm searching for a way to update some drivers in the OEMDrivers. I manage to find out that it's not as simple as copying the file over... :-( But apart from that I'm missing the direction on where to search. I'm not that far advanced.
As a temp fix, I cooked up a CAB file for the driver I wanted to replace (gpsdriver.dll), but after I installed the cab file and making sure the new gpsdriver.dll showed up, my GPS stopped working? The same for the libgles_cm.dll which I want to try - fixed my TouchFlo3D good as in "Not starting anymore." :-/
I can't understand why this didn't work....
Any guru out there want to help a starting cook?
Nobody wants to help?
mario661 said:
Nobody wants to help?
Click to expand...
Click to collapse
You can't update drivers without updating nk.exe because drivers are hardcoded for exact nk.exe and in your situation you are trying to use new drivers with old nk.exe.
You can only update OEM drivers if you cook a ROM....
mario661 said:
Hello All,
I'm searching for a way to update some drivers in the OEMDrivers. I manage to find out that it's not as simple as copying the file over... :-( But apart from that I'm missing the direction on where to search. I'm not that far advanced.
As a temp fix, I cooked up a CAB file for the driver I wanted to replace (gpsdriver.dll), but after I installed the cab file and making sure the new gpsdriver.dll showed up, my GPS stopped working? The same for the libgles_cm.dll which I want to try - fixed my TouchFlo3D good as in "Not starting anymore." :-/
I can't understand why this didn't work....
Any guru out there want to help a starting cook?
Click to expand...
Click to collapse
you can't just overwrite it-- some of the drivers are written as modules so as mccune said it needs to be cooked, not copied
Now I know where I need to start looking/learning. I could not understand _what_ I needed, which makes it hard to find the correct info. ;-)
Thanks!
Im a pretty capable guy and tried cooking my own. Just went back to Duttys in the end. I believe hes putt he 2.00 drivers in 3.6b

HP iPAQ 21x Custom ROMs-Help Needed!

Hello, I'm new here, and I have been attempting to make two custom ROMs for the HP iPAQ 21x series, and I ran into a huge problem. I have two dump folders, and I can't figure out how to turn either of them into an NBH(or NBF) file. Any help would be highly appreciated.
Edit:Oh, and also, in case anyone was wondering, I'm trying to make them a Windows Mobile 6.1 ROM and a Windiows Mobile 6.5 ROM, and they are both(as far as I know) clean, except for the HP stuff.
nbh or nbf... ? for what ? it is inpossible to flash it back, you need bldiag.nb0 and hpimage.bin (foxconn format) but fortunatly pdocwrite works fine, so you need to: dump or download dump of imgfs (part02, os) unpack it via imgfstodump, cook to wm 6,1 or 6.5, then convert back to imgfs via imgfsfrom dump, and write via pdocwrite, xip can be also writed by this way, xip is part01, it works but i'm not a rom cooker so I cant cook it myself...
edit: it is also possible to edit marvell obm's and bootloader, but only via linux
edit2: here is my post about ipaq 214 and pdocwrite http://forum.brighthand.com/showpost.php?p=1762892&postcount=4
edit3: it will also works on any 21x and 11x and as I think on other hp devices manufactured by foxconn
I'm sorry elektrownik, but I don't really get what you're saying, I'm not very experienced with this ROM stuff, this is the first time I've ever tried to make one. But in response to what you're asking(I think), I was going to make them NBH files, make a backup ROM image of the device, and then use the HP RUU, which I have made to look for a file called 'RUU_signed.nbh'(what I will name them), to update the device via Activesync connection.
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
But how do you want to sign it for hpruu it need hp cert and key, or did you cracked it. Anyway here is default rom. http://rapidshare.com/files/2236847...n_marked_internally_with_custom_extra_data.7z
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Fdo35 said:
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Click to expand...
Click to collapse
just do what I wrote - cook wm 6.1 or 6.5 to romdump convert it back to imgfs and it will be posible to write it to device by pdocwrite application
Fdo35 said:
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
Click to expand...
Click to collapse
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Fdo35 do you know how to flash ipaq 21x?
Maybe you can work together with some people already trying to make wm6.5 rom....
Kind regards,
W.
Steven855 said:
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Click to expand...
Click to collapse
What's "parameters", I don't know what you mean. Also I don't remember using NBSplit, I started out with a IMG file which I then dumped.
Edit:Oh wait, I see what you mean. I didn't use NBSplit, I was following the attached directions to reconstruct ROM, except it wasn't for the device the file specified, and instead of 'imgfs.bin', I used a file called 'ipaq214.img', and instead of 'Windows.nb' I used a file called 'flash.nb'. And, I'm pretty sure that elektrownik made both files.
lol why you all dont read what i wrote, i have rom, which was reconstructed from dump, but it impossible to flash it from sd like on htc by flash.bin, ipaq 214 need bldiag.nb0 and hpimage.bin to be flashed from sd, but those files never was released so it is impossible to study format in which they coming, 214 can be also flashed from pc, but it need foxconn application and like before hpimage.bin, and there is official metchod - hpruu, but files which it use need to be signed first, we dont have cert and key to sign them, it wold be possible to patch hpruu to delate sign validation but i dont see anyone who working on this, as i wrote only one working metchod is pdocwrite application, i check it and it works, but i'm not room cooker so i cant cook wm 6.1 or 6.5 imgfs...
I think there are quite few topics about it.
It would be maybe better to have EVERYTHING relevant in one so everyone who posesses knowledge can help.
Now it looks that we (you) are inventing hot water... no offence - i appreciate all the hard work you put into this. But we (you) need better cooperation and clean topic.
I am grateful to everyone who share and try to make something. Respect to you all!
Kind regards,
WODP
The HP iPAQ 110 has a ROM update on HP's website, is it possible to get any of those files from that?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3644061&prodNameId=3644062&swEnvOID=4014&swLang=13&mode=2&taskId=135&swItem=hh-59617-3

[Q][Sense 2.5] require[...] ?

Hi @all,
I've donwloaded the manila kitchen and also the current release of the manila package.
Now I want to write a new Tab and have some big problems with that. I hope you can help.
1st I've thought about looking into existing code (eg Twitter Tab). There I've my first problem. They use a script file called machine_status_svc, CLuaTweetList_svc and CLuaTweetEdit_svc (used in "5518259a_manila" or "twitterutil.luac"). They also use a function called CLuaTweetList_Instance() and I think which is included in CLuaTweetList_svc.
Now my problem: I can't find these files. Can anybody help?
2nd I've check the registry on my mobile and found the key HKLM\Software\HTC\Manila\HTCService. There are some dll files registered. I think they will work as background service during the manila is running. Now I want to write this kind of service too.
So does anybody know how these dll file have to be implemented? which procedures/functions are required and which aparameters etc?
I still have som other questions, but maybe I can solve them if I've got a reply to these at first.
I'm sorry but I don't find anything in the web about there questions.
I hope for your help! - Thanks!
Does maybe anybody know if HTC is providing these information?
If yes does anybody maybe also know a direct contact address (e-Mail) to get it?
Thanks :'(

Categories

Resources