i urgently need your help with my htc prophet after I haven't found an answer in the portal already:
as my prophet (seller is vodafone) showed the vender issue when trying to upgrade i used the downgrade and unlock cid program i found here on the page. after step one, using the downgrade command my device no gets hung while start up, I can see the ipl/spl window, that's all. nothing will happen even after waiting an hour or trying to hard reset the device again. the os listed now is 1.0.13.21
my problem is that due this active sync doesn't recognize the device anymore, i cannot connect to it and as of this i cannot go on with installation...
need more info? please let me know!
troost said:
i urgently need your help with my htc prophet after I haven't found an answer in the portal already:
as my prophet (seller is vodafone) showed the vender issue when trying to upgrade i used the downgrade and unlock cid program i found here on the page. after step one, using the downgrade command my device no gets hung while start up, I can see the ipl/spl window, that's all. nothing will happen even after waiting an hour or trying to hard reset the device again. the os listed now is 1.0.13.21
my problem is that due this active sync doesn't recognize the device anymore, i cannot connect to it and as of this i cannot go on with installation...
need more info? please let me know!
Click to expand...
Click to collapse
i managed somehow to install the 02.47.11 rom, but it seems that the os isn't starting.
is it possible, that wm 5 got lost due the upgrade?
help, please
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6
kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.
imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan
My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse
Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel
Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?
Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method
just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard
sorry i got my answer
please ignore my earlier question
fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX
****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks
Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!
Is the wm5 wwe rom the factory rom for your device or are you from another country?
It happened a while back when I was trying to update the radio image to latest 3.07 version and it failed saying "image corrupt". I believe my phone was again cid locked. I had done uspl unlocking a long back but I am not sure how it got re-locked.
Now when I insert a sim card into my orbit, it doesn't find the network. I trust this is as the radio image didn't update totally.
Worst of all, it fails to connect to activesync. It makes a connection as local area connection with limited connectivity. Activesync starts "troubleshooter for activesync" but to no avail. The problem isn't with activesync as activesync recognizes my other phones. Just to be sure I tried connecting it with my other computer as well and it gave the same error.
Now I am just left with the option of updating my rom using bootloader or using sd card and that too only the original rom's as I believe its CID locked again. The other rom stops updating at 3 % and the phone restarts. I tried the official o2 wm6 rom and the official o2 wm5 rom but I don't thing they have radio image as well, since the gsm problem still persists.
The activesync also still fails to connect.
Hence I trust I am left with the following:
-An orbit having O2 official wm5 rom installed with corrupted radio image.(Unable to register or find any gsm network)
-The device is cid locked
-The device not being connected by active sync.
So I am looking if anybody has a radio rom that would work on a cid locked o2 orbit(arte200). Also is there anyway to unlock cid other than activesync connection. Guys need a hand real bad... please
anybody... help
it might be time to "Kill" it, and get a warranty replacement. Fuse the main motherboard by applying power (no more than 12v) where power should not be...
that would be the last thing to do. I mean not to kill it but upgrade an o2 official rom and then take it to o2 saying the gsm radio just stopped working and getting it fixed under warranty.
but I was hoping to get a solution here from our expert cooks.
yesterday i upgraded my mda compact 3 with the new radio version
Before this upgrade i upgraded my mda with different roms and radios with succes
After the new radio upgrade from t-mobile, is the cid lock back on my mda and i cant upgrade it with new rom versions.
Even the Artemis USPl doesnt work anymore
a T-mobile rom upgrade works
but if i want to upgrade my mda with a different rom, disconnects the mda the usb connection.
i solved my problem
Step 1
remove sim and mem card
step 2
run uspl
step 3
upgrade radio back to old version
step 4
upgrade the rom
What was the radio version you installed?
Did you try CID unlock?
Cheers
radio version 3.06.90
cid unlock ?
do you mean the armenis uspl?
what is your SPL?
See this:
http://forum.xda-developers.com/showthread.php?t=311403
Cheers
i used that spl version, but after the radio upgrade it doesnt work anymore because the activesync signal is losts.
The message from the upgrade tool:
the rom image is damaged ( but i know its not damaged because i used it a lot)
spl 3.15.0000
ipl 3.15.0001
marcohag said:
yesterday i upgraded my mda compact 3 with the new radio version
Before this upgrade i upgraded my mda with different roms and radios with succes
After the new radio upgrade from t-mobile, is the cid lock back on my mda and i cant upgrade it with new rom versions.
Even the Artemis USPl doesnt work anymore
a T-mobile rom upgrade works
but if i want to upgrade my mda with a different rom, disconnects the mda the usb connection.
i solved my problem
Step 1
remove sim and mem card
step 2
run uspl
step 3
upgrade radio back to old version
step 4
upgrade the rom
Click to expand...
Click to collapse
hey man i do have the same problem i can't also not upgrade/update my mda compact 3 after i wanted to try the new T-mobile software but now i cant do anything i'm from holland and have installed the mda upgrade from tmobile can you explain to me more specified wat you did..?
hoi gasten,
I had the same problem. It helps to get your cards out before beginning, but I used the USPL untill the screen went black and the USB connection failed.
You could see there was power on, only because ther was this glow around the screen. Disconnected the device, took out the battery and started again.
Then I updated the ROM (tom_codon b&b) and it was succesfull.
The radio update (3.21.90) went exactly the same way.
I haven't got any problems since, not even with the dutch T-Mobile network, exept offcourse with activeSTINK.
But even this works fine after switching from USB port.
Good luck
I have Orange branded spv m700 and have unlocked and supercid'd the device using pof's tool. I then added HardSpl (Olipro 1.20). All appear to have loaded fine - phone is unlocked and Olipro shows up when put into bootloader.
So, the problem - every time I flash a cooked ROM (Ausdim, NiAx, FiNixNover...?) it won't boot past the first screen. I can rescue the situation by putting device into bootloader and flashing the official WM6 ROM (no radio, no ipl....) and it boots up just fine.
Can anybody help or at least point me in the direction of some good advice?
hmm... odd... can you list step by step what your procedure is for flashing the ROMs
I've done lots of devices - old XDA2i, SPVM600, wifes SPV M700 (unlocked, hard spl etc and flashed away!
This particular device shows IPL 0.50 & SPL 1.20 Olipro. It is unlocked (have o2 sim working in it), and should be SuperCid (I checked the box and radio shows as 1.16.00.00 - pof's patch I believe?). I also re-run HardSpl and Pof's unlock/supercid patch just in case it hadn't flashed properly.
I generally just download ROM and flash via RUU. Occasionally I get the device not responding error so I just re-run RUU from the bootloader screen.
Have tried WM 6.1 and 6.0 cooked roms but all show initial boot screen (numbers along bottom) next screen and then frozen, have waited and waited and nothing. Also, it would not flash back to Mozzers WM5 Orange UK ROM - same symptoms. I thought it was bricked, but the Dopod WM6 flashed perfectly.
Hope that helps - thanks for looking into my problem.
anybody please? por favor........
hmm.. i remember someone having a similar problem but it was some time ago..
two things to try just in case...
1) i'd manually go to bootloader (hard-spl) before flashing
2) Have you tried to flash from SD card? this method seems to provide less problems..
let me know how it goes..
A degree of success - managed to flash WM6 AX3L. All seems to be working. As I recall this is very similar to the official ROM and I used to use it last year because it is very stable. Think I moved on because of the missing email accounts problem. Will happily keep it if I can sort the email problem out. Never really had much fun with the hard reset after loading method - is there another/better way? Just wondering.
Also, now I have a "cooked" rom loaded perhaps it will stop being so sensitive.....!!
How strange! Have just flashed Akeo's new Diamond port ROM and no problems. Not only that, the ROM is FAB!!!