yesterday i upgraded my mda compact 3 with the new radio version
Before this upgrade i upgraded my mda with different roms and radios with succes
After the new radio upgrade from t-mobile, is the cid lock back on my mda and i cant upgrade it with new rom versions.
Even the Artemis USPl doesnt work anymore
a T-mobile rom upgrade works
but if i want to upgrade my mda with a different rom, disconnects the mda the usb connection.
i solved my problem
Step 1
remove sim and mem card
step 2
run uspl
step 3
upgrade radio back to old version
step 4
upgrade the rom
What was the radio version you installed?
Did you try CID unlock?
Cheers
radio version 3.06.90
cid unlock ?
do you mean the armenis uspl?
what is your SPL?
See this:
http://forum.xda-developers.com/showthread.php?t=311403
Cheers
i used that spl version, but after the radio upgrade it doesnt work anymore because the activesync signal is losts.
The message from the upgrade tool:
the rom image is damaged ( but i know its not damaged because i used it a lot)
spl 3.15.0000
ipl 3.15.0001
marcohag said:
yesterday i upgraded my mda compact 3 with the new radio version
Before this upgrade i upgraded my mda with different roms and radios with succes
After the new radio upgrade from t-mobile, is the cid lock back on my mda and i cant upgrade it with new rom versions.
Even the Artemis USPl doesnt work anymore
a T-mobile rom upgrade works
but if i want to upgrade my mda with a different rom, disconnects the mda the usb connection.
i solved my problem
Step 1
remove sim and mem card
step 2
run uspl
step 3
upgrade radio back to old version
step 4
upgrade the rom
Click to expand...
Click to collapse
hey man i do have the same problem i can't also not upgrade/update my mda compact 3 after i wanted to try the new T-mobile software but now i cant do anything i'm from holland and have installed the mda upgrade from tmobile can you explain to me more specified wat you did..?
hoi gasten,
I had the same problem. It helps to get your cards out before beginning, but I used the USPL untill the screen went black and the USB connection failed.
You could see there was power on, only because ther was this glow around the screen. Disconnected the device, took out the battery and started again.
Then I updated the ROM (tom_codon b&b) and it was succesfull.
The radio update (3.21.90) went exactly the same way.
I haven't got any problems since, not even with the dutch T-Mobile network, exept offcourse with activeSTINK.
But even this works fine after switching from USB port.
Good luck
Related
Dear all,..
Since I unlocked my MDA-PRo sim lock with the Buzz sim unlocker i'm experiencing radio problems.
I've tries almoast every ROM incl radio Roms. Still nu success.
The problem is that I do have a radio connection, but it keeps disconnecting when Im roaming. The GPRS connection keeps disconnecting, the radio signal disconnects when driving in my car. In the same road my work phone has no problem, only the Exec.
Before the Unlock there was no problem, after unlocking there is. Yesterday I re-unlocked my MDA-Pro with the BuzzDev unlock tool V1. sTill the same problem, not a steady radio signal...
Please advice...
Arjan D.
Hey I have the same or similar problem I have done all the prosses to ulnlock it ....now the radio version is 0.00.00 and i have already run the exe that it supposed to make the radio 1.whatever but still 0.00.00
could you please give me a and with this ??
thanks
After changing radio version into 0.00.00. with HTC_Uni_Unlock_v1. It is impossible to upgrade radio version of Exec with MaUpgradeUt_noID.exe.
I have upgraded radio version of my Exec with ROMUgradeUt.exe sucessfully. No any problem.
The problem isnt upgrading, but disconneting the radio signal several times a day. And when the radio signal is back again, the GPRS connection won't establish automatticly.
Before I userd the Sim unlock tool there weas no problem, but now when my MDA-Pro is unlocked there is...
I've unlocked my phone 1 year ago, since then I'm experiancing this problem. I've really tried almoast every rom, and every radio rom. Still no success...
Can someone tell me which rom (doesn't need to be a WM6 rom) including the radio rom is the best for the MDA pro?
thanx in advanced...
Arjan
Actually I am using Rom PV 2.10.07 and radio 1.15.00, my device is working normally.
Hi everyone,
A while ago I was stupid and tried to flash my O2 XDA Orbit without fully reading the instructions and therefore ended up "bricking" the device. It turns on but seems to hang on the "O2 Welcome Screen" which shows the following information:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
The device can boot up into the bootloader screen no problems and I have tried to install various ROM's from the German O2 WM6 ROM to the UK T-Mobile WM5 ROM but with no success, it just gets to 3% then reboots.
Does anyone know a way that I can restore the original O2 UK WM5 ROM from the bootloader? Or at least get it working again?
At this point there is no O2 Rom avaliable, you will have to wait till they finally release the WM6 Rom sometime this Summer.
Lordao
try this
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
1234567890
No Joy
pvdhelm said:
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
Click to expand...
Click to collapse
Thank you however I have tried the above instructions but my device just gets to 3% then reboots.
Does anyone know what the MTTY.EXE software is all about and is there any way that I can manually force the device to Flash using this?
Or!!!!!
Is there a way for me to clone a mates xda orbit and drop the image onto mine? Both were purchased at the same time just I thought i'd be clever and update mine which didn't quite work out.
Have you already tried to flash a rom by using your microSD card ?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to flash it from sd card if your orbit is cid unlocked
not sure
I dont think my device is cid unlocked as it would have worked with the updated rom install, wouldn't it? sorry pretty new to all this.
I have tried to flash straight from the sd card but it just searches through the sd card then goes straight to the multicoloured bootloader screen.
Anyother ways or is there a better rom that i could use?
Hello Everyone,
I currently own the HTC S620.I had it CID unlocked about 4 months ago through imeicheck. After the CID unlock I flashed the phone with the T-Mobile WM6 Beta Rom and then flashed to the T-Mobile WM5 Dash Rom shortly after.So last night I tried flashing to the offical T-Mobile Offical WM6 Rom.I keep getting the "Invalid Model ID" when I try flashing with the T-Mobile WM6 Rom and also the factory HTC Excalibur Rom.Any idea why this is happening? I cant flash either Rom now even after running the CID unlock again.
Please HELP!!!
Thanks in advance...
You need to CID Unlock. Flash rom. Set up mobile and get error and CID Unlock again.
That's what I had to do.
bidinot said:
Hello Everyone,
I currently own the HTC S620.I had it CID unlocked about 4 months ago through imeicheck. After the CID unlock I flashed the phone with the T-Mobile WM6 Beta Rom and then flashed to the T-Mobile WM5 Dash Rom shortly after.So last night I tried flashing to the offical T-Mobile Offical WM6 Rom.I keep getting the "Invalid Model ID" when I try flashing with the T-Mobile WM6 Rom and also the factory HTC Excalibur Rom.Any idea why this is happening? I cant flash either Rom now even after running the CID unlock again.
Please HELP!!!
Thanks in advance...
Click to expand...
Click to collapse
I had the same problem and IMEICHECK helped me with this problem:
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.
Good luck
I have a problem. I've installed the shaps 4.0 version wm6, my radio: 1.50.0.0
extRom: 3.60.20070822. And now i will to downgrade wm6 to my former wm5. It's from T-Mobile and so i downloaded: HER_TMDE_1211113_1050200_GER_SHIP
>ROM< but if I start it, it verifys the information on my HTC and a tri-color display appears. After some time the error comes: your phone isn't connected to the USB and so forth... I don't know what to do, maybe you can help me.
Greeting
use the custom ruu
I can't use it because i have a warranty. Can you give me the link of ruu wm5 t-mobile GER please?
mdavario2 said:
I can't use it because i have a warranty.
Click to expand...
Click to collapse
Not any more you don't if you flashed it with an unofficial ROM!
I hope you HardSPL'd it first...
Here is Mrvanx downgrade guide. Shipped WM5 ROM upgrades can be found in Hermes Wiki (which I can not access now due to some strange error). Your warranty is certainly void when you flash unofficial ROMs (of course if you hand it in for repairs with unofficial ROM installed), if you SuperCIDed your device and so on.... If you are not supercid and you can downgrade both windows and radio you should be ok. Be careful though - downgrading is quite risky.
Ok thanks a lot. One question more: is it normally that i'm unable, i have radio 1.50, to install other radio versions? I already tried to install 1.20 version but without succes.
The problem is that I can only install RUU_... ROMs and Radio, but I don't know why???
Secondly I didn't make SuperCID and HardSPL I only selected if I installed the Shap's ROM, how can I see that I don't have any warranty?
Hi!
I've an Artemis (o2 germany-software) and i already updated it to WM5 a year ago. Now my friend bought the new artemis with WM6 on it and with that cube and everything (with the o2 branding). So i wanted to get WM6 and saw it on the o2 homepage as a free update just like WM5 update the year before. So i tried to update and a comunication error 302 appeared at 51%. After the restart only the bootloader worked. then i found out that it's possible to load the update on a fat32 formated sd-card and it worked but the hardware reset wasn't possible out of the bootloader in which it switched back every time. So i took any cooked rom for my device, tried to update and it interrupted after 3%. When i now restarted my Artemis it worked perfekt with the o2 branded WM6 soft. But that soft looked so different to my friends one. So i used the USPL update to unlock my CID and choose any rom for my device. it failed. so i had to use the original rom and another rom to get it working again. then i choose the next new rom for Artemis....
I've tried it at least 30 times now with a different Rom every time and i'm close to a complete nervous breakdown. Does anyone have an idea what i could do to get WM6 with cube?
Its simple heres the link for wm 6.1 with cube - http://forum.xda-developers.com/showthread.php?t=371182
make sure you run the tool to cid unlock firtst though.
I already tried that one. it failed at 85% with update error 302
oh man!!!!! it worked!!!!! I don't know how but the full version with cube worked!
I'm so happy! Who made that Rom?