Orbit's radio image corrupted. - P3300, MDA Compact III ROM Development

It happened a while back when I was trying to update the radio image to latest 3.07 version and it failed saying "image corrupt". I believe my phone was again cid locked. I had done uspl unlocking a long back but I am not sure how it got re-locked.
Now when I insert a sim card into my orbit, it doesn't find the network. I trust this is as the radio image didn't update totally.
Worst of all, it fails to connect to activesync. It makes a connection as local area connection with limited connectivity. Activesync starts "troubleshooter for activesync" but to no avail. The problem isn't with activesync as activesync recognizes my other phones. Just to be sure I tried connecting it with my other computer as well and it gave the same error.
Now I am just left with the option of updating my rom using bootloader or using sd card and that too only the original rom's as I believe its CID locked again. The other rom stops updating at 3 % and the phone restarts. I tried the official o2 wm6 rom and the official o2 wm5 rom but I don't thing they have radio image as well, since the gsm problem still persists.
The activesync also still fails to connect.
Hence I trust I am left with the following:
-An orbit having O2 official wm5 rom installed with corrupted radio image.(Unable to register or find any gsm network)
-The device is cid locked
-The device not being connected by active sync.
So I am looking if anybody has a radio rom that would work on a cid locked o2 orbit(arte200). Also is there anyway to unlock cid other than activesync connection. Guys need a hand real bad... please

anybody... help

it might be time to "Kill" it, and get a warranty replacement. Fuse the main motherboard by applying power (no more than 12v) where power should not be...

that would be the last thing to do. I mean not to kill it but upgrade an o2 official rom and then take it to o2 saying the gsm radio just stopped working and getting it fixed under warranty.
but I was hoping to get a solution here from our expert cooks.

Related

Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking

Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6
kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.
imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan
My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse
Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel
Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?
Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method
just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard
sorry i got my answer
please ignore my earlier question
fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX
****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks
Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!
Is the wm5 wwe rom the factory rom for your device or are you from another country?

O2 orbit problems upgrading to wm6

Guys,
I had lot of problems upgrading my orbit, first of all i used Pof USPL for making my CID lock phone temporaly unlocked first i got some errors such as PDA and error [270] on the "PDA phone ROM Update Utility" this was easy couse i just disabled the windows firewall an i got it to work. but when i started the black&blue wwe upgrade i got some errors there my phone was low on storage space and when i cleared the storage my phone is stuck on the bootloader meny, i tryed to update with USPL again directly with ROMupdateUtillity not with the USPL_start.exe couse my phone is not loaded to winCE and not active sync, i did this by going to bootloader meny RGB meny and stgarted the o2 german update but i get i message telling me that the phone is wrong model ID error 244
With these problems i concluded that
You have to make sure that you have installed properly USPL
You have to make sure that you have free storage space
You have to make sure that you had disabled windows firewall
Any advice is very usefull to me and the xda-developers community
Kind regards
I also managed to get pof's USPL correctly installed. I then successfully flashed a WM5 HTC ROM just to test it was working. Success. I then flashed a WM6 ROM. Unfortunately I forgot to re-flash with USPL first. Hence I "BRICKED" my phone. A quick trip to my local O2 store, my brick was sent for repair. I have just received it back. Repaired under warranty. "Software Fault". Now I paid imei-check, got it unlocked and have now flashed BEPE's WM6 ROM successfully. So much faster that WM5. Great.

Restore original O2 UK ROM from Bootloader

Hi everyone,
A while ago I was stupid and tried to flash my O2 XDA Orbit without fully reading the instructions and therefore ended up "bricking" the device. It turns on but seems to hang on the "O2 Welcome Screen" which shows the following information:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
The device can boot up into the bootloader screen no problems and I have tried to install various ROM's from the German O2 WM6 ROM to the UK T-Mobile WM5 ROM but with no success, it just gets to 3% then reboots.
Does anyone know a way that I can restore the original O2 UK WM5 ROM from the bootloader? Or at least get it working again?
At this point there is no O2 Rom avaliable, you will have to wait till they finally release the WM6 Rom sometime this Summer.
Lordao
try this
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
1234567890
No Joy
pvdhelm said:
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
Click to expand...
Click to collapse
Thank you however I have tried the above instructions but my device just gets to 3% then reboots.
Does anyone know what the MTTY.EXE software is all about and is there any way that I can manually force the device to Flash using this?
Or!!!!!
Is there a way for me to clone a mates xda orbit and drop the image onto mine? Both were purchased at the same time just I thought i'd be clever and update mine which didn't quite work out.
Have you already tried to flash a rom by using your microSD card ?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to flash it from sd card if your orbit is cid unlocked
not sure
I dont think my device is cid unlocked as it would have worked with the updated rom install, wouldn't it? sorry pretty new to all this.
I have tried to flash straight from the sd card but it just searches through the sd card then goes straight to the multicoloured bootloader screen.
Anyother ways or is there a better rom that i could use?

WM6 upgrades - Various error

Hi all, have floated around the forum for a definitive but not really got my question answered, so here goes....
I have several V1605 Vodafone Hermes/Tytn devices in our organisation that i would like to upgrade to WM6, as the Voda default rom is appalling.
I have upgraded 2 or 3 to Black Majik etc, but i want to upgrade the rest from the default voda to HTC official, however i get the following:
A, INvalid vendor ID on one device
B, Connection error on another
In A, is there a custom ruu package with a non vendor specific ID, although i dont see why.
B, Flumoxed, goes to Bootloader flix on and on, even for a split second shows the grey screen and a progress bar, then Connection error.
Err, anyone got any clues?
TIA
lokidan said:
I have upgraded 2 or 3 to Black Majik etc, but i want to upgrade the rest from the default voda to HTC official, however i get the following:
A, INvalid vendor ID on one device
B, Connection error on another
In A, is there a custom ruu package with a non vendor specific ID, although i dont see why.
B, Flumoxed, goes to Bootloader flix on and on, even for a split second shows the grey screen and a progress bar, then Connection error.
Err, anyone got any clues?
TIA
Click to expand...
Click to collapse
For the A question, in this post http://forum.xda-developers.com/showpost.php?p=1410956&postcount=82 you can find WWE version with CustomRRU. Take care to have the last HardSPL before flash. You can flash the Radio ROM in second stage. If you want other languaje, in the thread you can find more if you take time to read it
For the B question, can be an USB issue (cable or USB port on the PC). Try on other PC and other cable.
Various errors - part 2
Thanks for A, however B, i have tried on several different machines still the same error, its weird and i have never seen one like this before....
Thanks
hard spl users guid
jcespi2005, ran through the guide for hard spl, failded.
it runs, places the device in to boot loader then fails with connection error.
Using Vista machine with latest drivers etc..
Any help?
lokidan said:
jcespi2005, ran through the guide for hard spl, failded.
it runs, places the device in to boot loader then fails with connection error.
Using Vista machine with latest drivers etc..
Any help?
Click to expand...
Click to collapse
Try to use a XP box instead a Vista one, and select SSPL to install HardSPL. This must work.
no
It doesnt, however if failed, but my spl is now 2.03
both custom ruu and official rom fail on error 260
Hi,
If these are Vodafone devices are they unlocked? If they are still locked then you will have to unlock them first then install Hard SPL 2.10 Olipro before attempting what you want to do.
Have a look in the wiki; its all in there. Feel free to come back if you need more help.
Good luck.
WB
....that was my next question....
So i unlock them first?
~clearly i do.....
~Will give it a go...
one done...
one of them is now unlocked and upgraded...Thanks.
The other has an ipl of 1.00 and an spl 2.03
can this be unlocked with the unlock tool and then upgraded or do i downgrade the spl?
Thanks all....

HELP: Cooked ROMS won't flash

I have Orange branded spv m700 and have unlocked and supercid'd the device using pof's tool. I then added HardSpl (Olipro 1.20). All appear to have loaded fine - phone is unlocked and Olipro shows up when put into bootloader.
So, the problem - every time I flash a cooked ROM (Ausdim, NiAx, FiNixNover...?) it won't boot past the first screen. I can rescue the situation by putting device into bootloader and flashing the official WM6 ROM (no radio, no ipl....) and it boots up just fine.
Can anybody help or at least point me in the direction of some good advice?
hmm... odd... can you list step by step what your procedure is for flashing the ROMs
I've done lots of devices - old XDA2i, SPVM600, wifes SPV M700 (unlocked, hard spl etc and flashed away!
This particular device shows IPL 0.50 & SPL 1.20 Olipro. It is unlocked (have o2 sim working in it), and should be SuperCid (I checked the box and radio shows as 1.16.00.00 - pof's patch I believe?). I also re-run HardSpl and Pof's unlock/supercid patch just in case it hadn't flashed properly.
I generally just download ROM and flash via RUU. Occasionally I get the device not responding error so I just re-run RUU from the bootloader screen.
Have tried WM 6.1 and 6.0 cooked roms but all show initial boot screen (numbers along bottom) next screen and then frozen, have waited and waited and nothing. Also, it would not flash back to Mozzers WM5 Orange UK ROM - same symptoms. I thought it was bricked, but the Dopod WM6 flashed perfectly.
Hope that helps - thanks for looking into my problem.
anybody please? por favor........
hmm.. i remember someone having a similar problem but it was some time ago..
two things to try just in case...
1) i'd manually go to bootloader (hard-spl) before flashing
2) Have you tried to flash from SD card? this method seems to provide less problems..
let me know how it goes..
A degree of success - managed to flash WM6 AX3L. All seems to be working. As I recall this is very similar to the official ROM and I used to use it last year because it is very stable. Think I moved on because of the missing email accounts problem. Will happily keep it if I can sort the email problem out. Never really had much fun with the hard reset after loading method - is there another/better way? Just wondering.
Also, now I have a "cooked" rom loaded perhaps it will stop being so sensitive.....!!
How strange! Have just flashed Akeo's new Diamond port ROM and no problems. Not only that, the ROM is FAB!!!

Categories

Resources