Hi,
I just wanted to share my frustration.
I received my new p3300 yesterday, I flashed the B&B 3.7, all perfect. I installed pocket informant, tomtom, and others.
This morning after soft reset the touch screen stopped working. Like this.
I soft reseted, then hard reseted but no response... and I have the lock on, so I cannot even use the mouse, I'm shucked at the unlocking screen... ****.
I found somebody in the office who had similar problem but after a month of using it.
Is that something that happens a lot?
I will have to send it to the shop...
Related
Hi, to all!
I have a problem with the touchscreen of my hermes alias O2 trion.
When starting from cold state the touchscreen works normal. After some time the screen reacts not allways and shortly after that it does not react at all. Reset does not change anything.
Is it a upgrading problem or is it a hardware problem?
Here the hole story:
I bought a used device with Win Mobile 5 on it. At the first try out it worked, but afer some time the screen did not react to my stylus at all. After a reset it worked again so i dit not pay much attention to this and upgraded to official Windows mobile 6 (which was downloaded from O2). Update worked fine.
Then i ran a rom update on the computer to change the start screen. The tion disconnected (update stopped at 0%). Little shock, but the trion still worked. The program and radio versions did not change.
First thought: this was no official update, so trion did not accept it. Was something installed or was everything blocked?
Could this make problems?
What do you think?
Thanks
i think this problem:
http://forum.xda-developers.com/showthread.php?t=285062
Alienax said:
After some time the screen reacts not allways and shortly after that it does not react at all. Reset does not change anything.
Click to expand...
Click to collapse
Did you try to re-calibrate your screen? It could be a question of the screen loosing calibration so bad that when you press it, it works but you are not HITTING any buttons, because the calibration is off...
I have that problem with my Hermes, I need to recalibrate several times every day, especially after sliding out the keyboard (since the screen flips then) .
There's a very nifty short-cut to the calibration app: press the middle button on the D-pad while pressing the messaging button to go to the calibration screen, then press the middle D-pad button to launch the calibration (same as pressing "calibrate" with your stylus).
There seems to be a lot of Herms that have serious calibration issues. I'm personally so tired of it I am thinking of buying something else.
Good luck,
Laz
It's KNOWN hardware issue where the processor heats up and *somehow* transfer heat to the digitizer which make it unresponsive. I got a Hermes just like that laying around. Can't fix it.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Thanks!
Today the touchscreen worked good. Even playing spider solitair was possible. Then i pluged it into power supply and the device got slightly warm. The touchscreen did not work any more.
Could be a heating problem of the prozessor like Mikro_ Tech described. Thanks by the way
How can i be sure it is this problem and not something else?
@LazPL: That was one of my first thoughts as well and i did.
When the Touchscreen works, it works just fine and accurate. Then it behaves strange (sometimes not corresponding to touches, programms close all of a sudden) and shortly after that it doesn not work at all.
@the_passenger: The Hermes Version is HT 626... Anything special to this, because the link just lists screen allignment issues for this modell?
What do you think of the solution from the link LazPL posted?
Hi there,few weeks ago I start to exprience prolems with my Orbit on WM5,like not switching on(so i had to remove the battery and put it back again)when u do something like call or whatever it used to froze.
So I updated to WM6(the official from O2 web site)the problems continued...but this time not always.
Finally I installed the "Artemis Touch 3.01 full" using the cid lock and everything,well that problems stop for a while but now suddenly it reset automatically then stops on the HTC logo.
I tryied to do hard-soft reset using the button but anything...
Any idea of what it can be?the pda is in mint condition and never felt the floor
Thanks.
Hi I'm new to this whole PDA phone thing but I got a HTC 8525 and got it unlocked it worked fine for a while then one day I was trying to run the pocketGBA emulator when my screen went blank(all the colour faded away then the entire screen just went blank). I took it to get repaired and the software end of things are fine and the hardware end is working fine but for some odd reason the screen just lights up and is completly blank. Even stranger is that sometimes the screen is totally fine and has no problems. Can anybody help me with this weird problem??? Note the screen is not broken.
Hi!
Probably You have a bad flex cable and it's required to be changed. Sometimes it happens so of to much qwerty keyboard opening and closing.
hi,
I resolved same problem than yours with this tuto
http://forum.xda-developers.com/showthread.php?t=321163
good luck
Hi,
first this is a great forum even the roms are great.
I am coming to you with a big Problem and i don´t know what to do anymore.
As me was given back my ipaq it was completly empty. When i put it on the cradle it began to start. After 2 seconds booting the orange light flashed one time (sign for loading) and after this the screens shuts off and the hp loo is like burned into the screen.
I had this before when i had an error bei updating my rom.
So i thought to hard reset or clean reset or to put it into preboot mode to update the rom. But nothing works. He is not taking any kind of reset.
So i thought i have to charge the battery. But didn´t help it even did´t get warm after one night charging. But when i am trying a reset, after some tries puting it on the cradle back, he tries to boot but the same happens. I have win 6.0 installed.
Does anybody has an idea? I need it on Friday for my holidays, if not i don´t have any navigation system and i am traveling by caravan over 5000km, it would be hard without.
I am counting on you guys, thnx a lot for helping
As far as I know - there is nothing You can do.
There is a problem with motherboard. And it seems that this problem appears just after a drop. Some inner component become loose.
I do have a one hx2490b motherboard with the same problem - it starts to load and then turns itself off. Trying to do a reset does not work as well there is no bootloader.
my tp2 touch screen is not responding suddenly!!! the problem started only after i answered some call through the screen slider, however, the touch screen is not responding to my fingers ever since !!!!
now i'm operating the phone only through the buttons !! but as if it is not touch screen!!
anyone have a clue about what the problem can be?? please help me. my device runs wm 6.5 and this is the first time to have this problem, i did soft reset many times but no imrovment!!
I had SOD this early morning and it was my first, do you guys think there is a relation between these events???
I have the same problem.
Just happened this morning.
I was able to use my mobiler to access the screen.
Tried several hard resets. No luck.
Tried re-installing energy Rom (4.1)
Then tried the new Energy Rom (4.11) still no luck.
But then I got the big idea to go back to the stock ROM. Now I cannot use the on screen prompts to access "my mobiler"
Anybody have any suggestions or is it back to AT&T for a new phone?
so whe you back to the stock rom, did u get ur screen working again??
No. no workey
Now that stock rom is on. I keep going back to the "Sim Card Changed" screen. I can not tap "cancel" or "Next". I can use the hard buttons so I am able to get to the phone and then use keyboard to dial.
Still no touch screen. And no work around with keyboard to get to screen. need a "Tab" button. then might be okay.
this sucks.
Just a quick bump before I go to AT&t in the morning.
Try running task 29 and then flash back to a stock.
And have you tried taking your sim card out of you're phone? Maybe that will avoid the message.
i'm buying a black berry
Does your screen look as if an oily residue is under the touch screen part?
My screen stopped responding a few weeks after the appearance of the 'oil' and Vodafone swapped it with no problems. It seems like a fairly common problem
yes, I've got that oily spot and somehow i managed to relief the problem only for minutes when i raised the digitizer carefuly which got me the screen working for few minutes untill it went unresponsive again after while. I'm looking forward to do alcohol swab to this oily spot and will see weather this will solve the problem..