anyone know whether hermes have the software which can make our hermes when sliding keyboard, it will direct unlock the keypad. something like when we press the power button from sleep mode.
any idea?
in kaiser, we have the software while sliding keyboard, it will have sound.
what i want to find is when sliding keyboard, the screen will on.
I'd like too for the Hermes if possible.
I believe it's could not be done.. or extremely difficult.
It is because the keyboard slide is using some magnet to detect and rotate the screen... not trigger by software.
The same goes for the slide and sound...
tugas2khas said:
I believe it's could not be done.. or extremely difficult.
It is because the keyboard slide is using some magnet to detect and rotate the screen... not trigger by software.
The same goes for the slide and sound...
Click to expand...
Click to collapse
yes, but you see the screen rotate, i think it also done by the registry setting.
so what i think is maybe we can just add one more entry at registry there~to make it work~~
dont know can or not,just my imagine~
Not sure if this is what your looking for, but try this post right here
Ive tried editing the registry on my hermes to make the Keyboard SLIDING sounds, and it didn't work.. because our keyboards have magnet sensors as opposed to hardware/software sensors.. So I dont think it will be possible..
thats means the sliding sound keyboard also will not working on hermes?
damn i was hoping i could get keyboard sliding sounds working on the hermes.. it'd be good if there was a way found!
if you download S2U2 from on the forum somewhere it gives you the 'ipod' slide to unlock screen which has a setting to unlock the phone when you slide it open HTH
Related
Hi, I have been searching the web for quite a while looking for this and haven't been able to find what I am looking for, so hopefully someone here can point me in the right direction.
Does anyone know of a lightweight Slide to unlock program compatable with the TP2? I find that S2U2 uses to many resources for my liking, and battery level suffers. Ideally what I want is a simple replacement for the built in lock function which uses a slide rather than pressing in two places. I want the phone to remain locked when there is a notification or incomming call, and I want to be able to see the currently displayed app or home screen displayed under the slider.
Thanks for any ideas,
Tom
http://forum.xda-developers.com/showthread.php?t=386451
here you go
I used this when S2U2 v2.02 was being buggy on me. it allows you to slide anywhere on the screen to unlock, either left to right or right to left. no up/down. you can also unlock it the usual way, by pressing 2 places at once.
you have the option of having it lock in call as well.
hope it's what you're looking for
I also thought that S2U2 used too much memory for what I needed (to lock the device). The suggested alternative, CSDEVCTRL, was exactly what I needed. Uses default lock. It only uses 3 kb of memory.
Thanks for the reply, I have had a look at CSDEVCTRL and while it does seem promising I found it was too easy to unlock the phone, S2U2 requires a deliberate action on the slider bar where CSDEVCTRL seems to unlock if I just take the phone out of my pocket. It would be greatly improved if it had a slider bar graphic like S2U2, I guess I'll keep on looking.
Thanks again,
Tom
I wonder if there coukd be a light version of s2u2 made to work with phones such as the TP2 that doesn't need the in call features. this would potentially bring the memory uasage down?
I am using Rotastrain's Slide to Unlock utility but it doesn't work as nicely as s2u2. The Notifications isn't locked, neither is the Long Press End button. Also, doesn't auto load on power switch.
Thinks I'll try s2u2, worked well on my TyTnII.
Have had my new Sprint TP2 for a couple of weeks now, really enjoying it. First "smartphone" for me, figured it's time to join the 21st century.
Biggest issue so far:
When putting the phone into a holster, it comes out of sleep mode (display comes on) - no, I'm not hitting the Power key when I do this. Something here doesnt seem right, but that's what happens...
At that point, on occasion the Dial key may get hit while in the holster (I can understand this, it's a hardware key) - which if the key kets tagged 2x while out of sleep-mode does a pocket dial to the last number called/received.
My original fix to this was to enable the password lock. While a PITA to unlock the phone every time, I'd rather do that than pocket dial. HOWEVER, when running an output only app (such as Google Maps or Navigation) the phone keeps going into lock mode and asking for the password - NOT a good situation while driving down the road...
So my question(s) are:
1. Is there a way to keep the phone from exiting sleep mode while entering a holster?
2. Is there a way to keep the phone from locking up and requesting a password during apps such as Navigation?
(I found this thread while searching, but still un-answered... [Thread 614599; vBulletin wont let me post the URL...)
Thanks in advance for any help!
Jim
This is a completely stock phone, no mods (so far...) other than a couple of applications added (Google Mobile apps, WSOP Poker).
The first question I have for you. Is the case/holder specific to HTC TP2 or is it generic and originally designed for a blackberry?
I ask this because no matter what blackberry case i've ever tried, they always bring my phone out of sleep mode. The reason is the magnet in the case that is designed to put the BB INTO sleep mode.
The case is specific for the Sprint TP2, from ThinkTouchPro2.com. It's the [HTC Touch Pro 2 Naztech Kaskade Vertical Pouch Case - Black], since I still cant post a url... well, I guess I can fake one:
thinktouchpro2.com/htc-touch-pro-2-cases-7462.html
It's definitely the magnet that's doing the trick. The phone comes out of sleep mode just as it starts to go into the case, so it's not a function of hitting any buttons.
Somehow I got into the habit of hitting the power button to put it to sleep before going into the holster, SOOOO thinking maybe it's a 2-way deal I tried leaving the phone awake and putting into the holster - no dice, still awake.
Test 2 was to put the phone into the holster, and then force to sleep. Removing it wakes the phone up, that I'm cool with. But I'm still left with the issue of pocket dialing whenever I use the holster...
Maybe the best solution would be to go to a non-magnetic holster?
Jim
that would be it.
The device uses a magnetic switch to tell it when you slide the keyboard out. So by pulling the device in/out of the case the magnet is triggering the switch leading the device to think you've slid out the keyboard and it should wake up.
I think Advanced config has an option to disable the device from waking up when the keyboard is slid open.
Actually I believe it's the magnet on the stylus, it doesn't have anything to do with the sliding function.
There was a solution for this somewhere around the forums.
If I'm not mistaken, removing the "wake up when keyboard is out" setting, solved the problem with cases that have a magnet.
j0shtalgia said:
Actually I believe it's the magnet on the stylus, it doesn't have anything to do with the sliding function.
Click to expand...
Click to collapse
my laptop uses a magnet to secure the screen when i close it and if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
dont think the stylus magnet would cause it because the stylus is still in the device and the magnet is securing it in. I think it has another sensor in the stylus slot and just uses the magnet to suck it in because on older devices (wizard) the stylus would go loose, but then again those devices didn't wake when the stylus was removed.
fone_fanatic said:
my laptop uses a magnet to secure the screen when i close it and if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
dont think the stylus magnet would cause it because the stylus is still in the device and the magnet is securing it in. I think it has another sensor in the stylus slot and just uses the magnet to suck it in because on older devices (wizard) the stylus would go loose, but then again those devices didn't wake when the stylus was removed.
Click to expand...
Click to collapse
Ah, I see. Interesting!
fone_fanatic said:
... if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
Click to expand...
Click to collapse
BINGO, think we're onto it as I've seen this behavior as well.
I've poked around looking for this, but the closest I've found is the "Keyboard Sliding Sound", but there's not an option to kill the wake-up function. Can someone point me in the direction of the "Advanced Config"?
Jim
So why not use pocket sheild? It has a 15 sec timer on it, so if you put it in your holster and it "wakes up", after 15 seconds it will turn the phone off again if there isn't any action done on it. Use it to only turn on with the light sensor when you pull it out of you pocket or a finger swipe from top to bottom. Also, you can tell it what apps that it cannot go into sleep mode on.
aj48198 said:
So why not use pocket sheild?
Click to expand...
Click to collapse
That's actually on my list of apps to take a look at, but for a different reason. I'd still like it to not come on at all, as the pocket dial I made was well w/in the 15s timeout for PS.
Ok, so the search originally didnt work for me because I didnt realize it was the magnet causing the wake-up. Knowing that now, I found the registry change I need to make in another thread.
Now for the total noob quesion:
How do I get into the registry to edit it?
I gather Total Commander is the popular tool of choice, and now have that installed. But my searches keep coming up with various tweaks to MAKE in the registry, but not how to GET TO it. I was unable to find this in the TC docs, either...
Thanks for the patient assistance to a WM noob.
(tho I'm a .Net programmer, so not a complete ijit - unless you want to hold being a .Net programmer against me, which I really couldnt blame you for - but it beats the heck outta COBOL...)
Jim
PHM Registry Editor. I would have posted a link but I don't have enough posts to do so!! Just google it and it should come up I got mine off of freewareppc com
Pocket Sheild will not let anything happen what so ever. Unless you physically make it happen, it will do nothing but sit there at the unlock screen waiting for input. If nothing happens, the screen will go back into sleep mode. Check the website out, that should help you make your decision easier. You can change the timer to be 10 seconds as well but I think that is about as close as you can get beside turning the phone off!!
SailCO26 said:
Have had my new Sprint TP2 for a couple of weeks now, really enjoying it. First "smartphone" for me, figured it's time to join the 21st century.
Biggest issue so far:
When putting the phone into a holster, it comes out of sleep mode (display comes on) - no, I'm not hitting the Power key when I do this. Something here doesnt seem right, but that's what happens...
At that point, on occasion the Dial key may get hit while in the holster (I can understand this, it's a hardware key) - which if the key kets tagged 2x while out of sleep-mode does a pocket dial to the last number called/received.
My original fix to this was to enable the password lock. While a PITA to unlock the phone every time, I'd rather do that than pocket dial. HOWEVER, when running an output only app (such as Google Maps or Navigation) the phone keeps going into lock mode and asking for the password - NOT a good situation while driving down the road...
So my question(s) are:
1. Is there a way to keep the phone from exiting sleep mode while entering a holster?
2. Is there a way to keep the phone from locking up and requesting a password during apps such as Navigation?
(I found this thread while searching, but still un-answered... [Thread 614599; vBulletin wont let me post the URL...)
Thanks in advance for any help!
Jim
This is a completely stock phone, no mods (so far...) other than a couple of applications added (Google Mobile apps, WSOP Poker).
Click to expand...
Click to collapse
I think this is what you need:
1) this is a magnet holster issue -- FIX: from wmexpert touch-pro-2-tip-fix-cases-magnets-issue-registry-fix *attached Cab
2) To stop certain apps from locking automatically I use S2U2 *zip attached (Slide to Unlock) there is a list of applications that you can set not to lock when active. I use this for GPS navigation for example. showthread.php?t=527523
You can set a password with this or not as you wish. You'll like it.
Keep in mind that the one sideeffect of the magnet fix is that the phone will not automatically unlock on opening the keyboard. You have to hit the power button. Personally I don't have any problem with this.
aj48198 said:
Pocket Sheild will not let anything happen what so ever. Unless you physically make it happen, it will do nothing but sit there at the unlock screen waiting for input. If nothing happens, the screen will go back into sleep mode. Check the website out, that should help you make your decision easier. You can change the timer to be 10 seconds as well but I think that is about as close as you can get beside turning the phone off!!
Click to expand...
Click to collapse
well he is making it physically happen, but unintentionally. The magnet in the holster is waking the device up by making it think the keyboard has slid open, then the call button is being pressed against the case causing the device to place a call.
as i stated earlier, its best to disable wake-up when keyboard is slid out which is provided in a cab in the post right before this one.
Thanks aj and fwp, I think I've got it now.
Backed into a copy of the PHM RegEdit, and the slide fix worked great! No worries about the kb not waking the phone up, never used that function anyway.
Re the S2U2 app and preventing lock during some apps, does PocketShield also do this - or would I need to run both to keep GPS apps alive?
Thanks again!
Jim
fone_fanatic said:
well he is making it physically happen, but unintentionally. The magnet in the holster is waking the device up by making it think the keyboard has slid open, then the call button is being pressed against the case causing the device to place a call.
as i stated earlier, its best to disable wake-up when keyboard is slid out which is provided in a cab in the post right before this one.
Click to expand...
Click to collapse
I get that, and if the cab fixes the issue, thats great. What I was saying was that pocket sheild will not unlock at all, be it the keyboard slid open or the stylus came out, unless you program it to do so. I just tried to make it unlock by sliding the keyboard open and the only thing it did was go into landscape, still locked tho.
aj48198 said:
I get that, and if the cab fixes the issue, thats great. What I was saying was that pocket sheild will not unlock at all, be it the keyboard slid open or the stylus came out, unless you program it to do so. I just tried to make it unlock by sliding the keyboard open and the only thing it did was go into landscape, still locked tho.
Click to expand...
Click to collapse
ahh ok, not familiar with that app and thought you were saying that it would wait for an input (i.e. buttons pressed) for a set time, and if nothing happened then it would lock the device after a set time period.
SailCO26 said:
Thanks aj and fwp, I think I've got it now.
Backed into a copy of the PHM RegEdit, and the slide fix worked great! No worries about the kb not waking the phone up, never used that function anyway.
Re the S2U2 app and preventing lock during some apps, does PocketShield also do this - or would I need to run both to keep GPS apps alive?
Thanks again!
Jim
Click to expand...
Click to collapse
PS does do that (preventing lock during some apps) You just have to tell it when you are in the settings.
Thanks for all the great info! Have the phone "safe" now, but will be looking into PocketShield as the next app.
Jim
hey guys...greetings...
I know all of you are geniuses here, so hopefully someone will be able to help me.
I'm working on a application for the TP2, an tht requires a landscape mode.
Now i am able to launch the program in landscape mode, but the problem is i am unable to catch keyboard slide events. What i mean here is the managed code rotates the screen initially,but, if a user slides the keyboard back in, the screen goes back in the potrait mode, thereby making the application throw an exception.
I tried with the reg values
HKLM->SYSTEM->GDI-> ROTATION
HKLM->SYSTEM->KEYPAD->ISSLIDEOUT
But i seem to be going nowhere. The Screen rotates to potrait, my application throws an exception, and the program quits.
Cant i do something tht the system wont detect a keypad slide?
Cos everything i'll be doing is via touch interface. i wont require a hardware keyboard.
If anyone can help, will appreciate it
I keep my desire in my shirt pocket with screen facing my body. The problem is touch screen seems to work through my shirt, so when the phone is ringing the motion of me removing the phone pulls down on the lock and answers the phone.
Is there anything that can be done to reduce the screen sensitivity so it doesn't work through my shirt touching my skin.
Thanks
Yeah have the screen facing outwards LOL.
put it in a case for protection too like the pdair pouch or the sena ultra slim pouch
stitch a layer of thick material e.g. denim, onto the inside of your shirt pocket
Dude, its android (freedom). Change your lockscreen to something else
I think the app is called lockboot.
It should give you the option of default android lock, or iphone lookalike lock, or a few others...
Anything that unlocks with a side swipe instead of a down swipe should fix your problem.
Regards -e
edit****
Sorry mate, i was a bit quick. Only one "o"; "Lockbot". I havent tried it yet though, but since it changes the lockscreen i assume it changes your answer swipe too...
I don't like having the screen facing outwards so that's a no no.
The thing is I like the default lock screen and didn't want to make my phone look like a iphone copy, was hoping I could reduce the sensitivity of the touch screen.
I will look at some other lock screens hopefully there are some that don't look too iphoneish
Thanks
I totally agree with the iphone unlock being ugly, but I do think the default android lock is nice, and it has a right angle swipe...
Dunno about the sensitivity change, reckon that might affect the whole phone. But someone here in the forum can probably offer some advice. Good luck.
so you have you phone in your shirt pocket, when you pull it out it unlocks, so you have the phone bottom down.
if you put it bottom up then when you pull it out of your pocket the touch will make it slide from bottom to top which will not unlock it right? there is your solution.
+ there is the possibility of making the "phone pull out motion" very cool when you pull it out with the bottom up.
supasye said:
so you have you phone in your shirt pocket, when you pull it out it unlocks, so you have the phone bottom down.
if you put it bottom up then when you pull it out of your pocket the touch will make it slide from bottom to top which will not unlock it right? there is your solution.
+ there is the possibility of making the "phone pull out motion" very cool when you pull it out with the bottom up.
Click to expand...
Click to collapse
That would probably trigger automatically setting the phone to busy and disconnecting the call or forwarding to voice mail, I think that's what sliding up on the lock screen does.
How about dont put it in your shirt pocket?
hungabunga said:
I don't like having the screen facing outwards so that's a no no.
The thing is I like the default lock screen and didn't want to make my phone look like a iphone copy, was hoping I could reduce the sensitivity of the touch screen.
I will look at some other lock screens hopefully there are some that don't look too iphoneish
Thanks
Click to expand...
Click to collapse
LockBot have many lockscreens, iPhones, Nexus One, Eris, .. you can even make your own customized lockscreen in that program, pretty nice, have a go at it, its worth it
EroThraX said:
That would probably trigger automatically setting the phone to busy and disconnecting the call or forwarding to voice mail, I think that's what sliding up on the lock screen does.
Click to expand...
Click to collapse
Thats right, this way i have cancelled 4 out of 5 recent phone calls.
The default screen unlock in the Desire is the most stupid i've ever seen. If you put your phone upwards in your pocket, you answer all calls by grabbing your phone from your pocket, if you put it in upside down, you cancel the call automatically.
If only 1 engineer at HTC called another with the phone in his pocket, they would have noticed this. It's 'HTC quietly stupid' on this one. I have installed Lock 2.0 for now, but will keep looking for a better solution.
Can't turn it upside-down as it will then reject the call. will give the lock app a go later tonight.
pwhooftman if you find a good lock app then please let me know.
thanks
Sully
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
just installed lockbot, well work the few pounds and now have flan style unlock which requires a more precision touch to unlock.
Sully
Having recieved a call while using lockbot I still have the same problem.
When using lockbot and you recieve a call the phone unlocks itself and I see the slide to answer desire screen which was my initial problem.
It looks like I need to replace the slide to answer bit rathe rthan the locking sceen.
Can somebody who has lockbot confirm that you still get the slide to answer even with lockbot in use.
Thanks
hungabunga said:
Having recieved a call while using lockbot I still have the same problem.
When using lockbot and you recieve a call the phone unlocks itself and I see the slide to answer desire screen which was my initial problem.
It looks like I need to replace the slide to answer bit rathe rthan the locking sceen.
Can somebody who has lockbot confirm that you still get the slide to answer even with lockbot in use.
Thanks
Click to expand...
Click to collapse
I had the same experience. Lock 2.0 gives me a iphone like left to right slider for unlocking. When i receive a call , i get the (traditional) green "answer" and red "Deny" buttons. So no unlock slider when receiving a call, but onscreen buttons which are far less accidentally pressed.
No Lock
I had this preoccupation also and installed the No Lock app. This way I also get the green/red buttons.
I gave up on lockbot as the phone would not fully go to sleep mode, I could wake it pressing any key.
Gone back to the standard lock screen for now and I just take the phone out of my pocket very carefully.
Sully
Im switch from WinMo to Desire and Im very angry because my every call when I take phone from case(case which came with TyTnII and phone is horizontal position) is droped. Im prety shure that I do not touch screen with finger on hand, because I take phone on top and bottom and take it out from case.
This is realy annoying...
I've sent HTC an e-mail to, at least, make this problem known. Maybe they will put an anti-pocket screen lock in next firmwares.
I've used the No Lock app to disable lock. Unfortunately it possible to wake the phone by pressing any key.
Is there any application that disables screenlock but locks the keys (besides power, off course)?
Hi all,
I was wondering, is there a way or app to change the way to answer the touch pro 2 /tilt 2? I know everyone loves slide to answer, however i like my answer or reject soft button. Anyone know of a tool to have buttons instead of the slider?
Thanks.
You could try S2U2. If you activate the caller id under the S2U2 settings and turn the slide to answer off, you will get the answer and reject buttons. The screen won't be the same, but it will give you the buttons instead of the slider.
I hate the slide to answer on the phone because every once in a while when I take my phone out, the screen flips causing what would normally slide to answer to be a slide to reject.
I have missed MANY calls because of that crap. I hate it.
Master Thief-117 said:
I hate the slide to answer on the phone because every once in a while when I take my phone out, the screen flips causing what would normally slide to answer to be a slide to reject.
I have missed MANY calls because of that crap. I hate it.
Click to expand...
Click to collapse
The phone application is not normally configured to change orientation according to the G-Sensor. Its possible that the phone application was somehow added to the G-Sensor whitelist due to a mod you made. You can remove it from the G-Sensor whitelist (use this forum's search function), which I recommend, since having the phone app on the whitelist causes all sorts of issues.
The other possibility is that you are using a case that has a magnetic clasp, which is causing the phone to think the hardware keyboard is open (this is triggered by a magnetic sensor). There is a registry edit to prevent this.