I keep my desire in my shirt pocket with screen facing my body. The problem is touch screen seems to work through my shirt, so when the phone is ringing the motion of me removing the phone pulls down on the lock and answers the phone.
Is there anything that can be done to reduce the screen sensitivity so it doesn't work through my shirt touching my skin.
Thanks
Yeah have the screen facing outwards LOL.
put it in a case for protection too like the pdair pouch or the sena ultra slim pouch
stitch a layer of thick material e.g. denim, onto the inside of your shirt pocket
Dude, its android (freedom). Change your lockscreen to something else
I think the app is called lockboot.
It should give you the option of default android lock, or iphone lookalike lock, or a few others...
Anything that unlocks with a side swipe instead of a down swipe should fix your problem.
Regards -e
edit****
Sorry mate, i was a bit quick. Only one "o"; "Lockbot". I havent tried it yet though, but since it changes the lockscreen i assume it changes your answer swipe too...
I don't like having the screen facing outwards so that's a no no.
The thing is I like the default lock screen and didn't want to make my phone look like a iphone copy, was hoping I could reduce the sensitivity of the touch screen.
I will look at some other lock screens hopefully there are some that don't look too iphoneish
Thanks
I totally agree with the iphone unlock being ugly, but I do think the default android lock is nice, and it has a right angle swipe...
Dunno about the sensitivity change, reckon that might affect the whole phone. But someone here in the forum can probably offer some advice. Good luck.
so you have you phone in your shirt pocket, when you pull it out it unlocks, so you have the phone bottom down.
if you put it bottom up then when you pull it out of your pocket the touch will make it slide from bottom to top which will not unlock it right? there is your solution.
+ there is the possibility of making the "phone pull out motion" very cool when you pull it out with the bottom up.
supasye said:
so you have you phone in your shirt pocket, when you pull it out it unlocks, so you have the phone bottom down.
if you put it bottom up then when you pull it out of your pocket the touch will make it slide from bottom to top which will not unlock it right? there is your solution.
+ there is the possibility of making the "phone pull out motion" very cool when you pull it out with the bottom up.
Click to expand...
Click to collapse
That would probably trigger automatically setting the phone to busy and disconnecting the call or forwarding to voice mail, I think that's what sliding up on the lock screen does.
How about dont put it in your shirt pocket?
hungabunga said:
I don't like having the screen facing outwards so that's a no no.
The thing is I like the default lock screen and didn't want to make my phone look like a iphone copy, was hoping I could reduce the sensitivity of the touch screen.
I will look at some other lock screens hopefully there are some that don't look too iphoneish
Thanks
Click to expand...
Click to collapse
LockBot have many lockscreens, iPhones, Nexus One, Eris, .. you can even make your own customized lockscreen in that program, pretty nice, have a go at it, its worth it
EroThraX said:
That would probably trigger automatically setting the phone to busy and disconnecting the call or forwarding to voice mail, I think that's what sliding up on the lock screen does.
Click to expand...
Click to collapse
Thats right, this way i have cancelled 4 out of 5 recent phone calls.
The default screen unlock in the Desire is the most stupid i've ever seen. If you put your phone upwards in your pocket, you answer all calls by grabbing your phone from your pocket, if you put it in upside down, you cancel the call automatically.
If only 1 engineer at HTC called another with the phone in his pocket, they would have noticed this. It's 'HTC quietly stupid' on this one. I have installed Lock 2.0 for now, but will keep looking for a better solution.
Can't turn it upside-down as it will then reject the call. will give the lock app a go later tonight.
pwhooftman if you find a good lock app then please let me know.
thanks
Sully
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
just installed lockbot, well work the few pounds and now have flan style unlock which requires a more precision touch to unlock.
Sully
Having recieved a call while using lockbot I still have the same problem.
When using lockbot and you recieve a call the phone unlocks itself and I see the slide to answer desire screen which was my initial problem.
It looks like I need to replace the slide to answer bit rathe rthan the locking sceen.
Can somebody who has lockbot confirm that you still get the slide to answer even with lockbot in use.
Thanks
hungabunga said:
Having recieved a call while using lockbot I still have the same problem.
When using lockbot and you recieve a call the phone unlocks itself and I see the slide to answer desire screen which was my initial problem.
It looks like I need to replace the slide to answer bit rathe rthan the locking sceen.
Can somebody who has lockbot confirm that you still get the slide to answer even with lockbot in use.
Thanks
Click to expand...
Click to collapse
I had the same experience. Lock 2.0 gives me a iphone like left to right slider for unlocking. When i receive a call , i get the (traditional) green "answer" and red "Deny" buttons. So no unlock slider when receiving a call, but onscreen buttons which are far less accidentally pressed.
No Lock
I had this preoccupation also and installed the No Lock app. This way I also get the green/red buttons.
I gave up on lockbot as the phone would not fully go to sleep mode, I could wake it pressing any key.
Gone back to the standard lock screen for now and I just take the phone out of my pocket very carefully.
Sully
Im switch from WinMo to Desire and Im very angry because my every call when I take phone from case(case which came with TyTnII and phone is horizontal position) is droped. Im prety shure that I do not touch screen with finger on hand, because I take phone on top and bottom and take it out from case.
This is realy annoying...
I've sent HTC an e-mail to, at least, make this problem known. Maybe they will put an anti-pocket screen lock in next firmwares.
I've used the No Lock app to disable lock. Unfortunately it possible to wake the phone by pressing any key.
Is there any application that disables screenlock but locks the keys (besides power, off course)?
Related
Hello, I wasn't able to find anything but does anyone know of any settings or a program that will lock the clock on the home screen. The phone unlocks in my holster or pocket and i always hit the clock and keep changing the time.
Random thought/stupid question. I assume that you are using the built in "lock" and not just turning the screen off correct? I know others have had problems with a magnetic latching case activating the "you pulled your stylus out sensor." It shouldn't be a problem with you keeping your phone in your pocket, but if it's just in the case when this happens try getting a case that uses something other than magnets as the catch.
Personally I love this little gem:
Smartlock
After you install it, you can find it under Settings > System. You can set it to lock the screen when you push the power button, when it fades out by itself, even when someone calls you. Very handy.
Also you can install this one here to make the lockscreen look alot better:
Dusk 6.5 lockscreen
I use both and I'm very happy with it
mhurg said:
Personally I love this little gem:
Smartlock
After you install it, you can find it under Settings > System. You can set it to lock the screen when you push the power button, when it fades out by itself, even when someone calls you. Very handy.
Also you can install this one here to make the lockscreen look alot better:
Dusk 6.5 lockscreen
I use both and I'm very happy with it
Click to expand...
Click to collapse
Thanks mhurg, I will try both of these.
brad_wp said:
Random thought/stupid question. I assume that you are using the built in "lock" and not just turning the screen off correct? I know others have had problems with a magnetic latching case activating the "you pulled your stylus out sensor." It shouldn't be a problem with you keeping your phone in your pocket, but if it's just in the case when this happens try getting a case that uses something other than magnets as the catch.
Click to expand...
Click to collapse
Actually i just wanted something in general. Just cuz the clock doesnt need to be changed all the time and i always hit it and it always goes into the clock settings or my alarm clock settings.
Good luck =)
the only way to change the behavior of this is to mod the lua file that controls it!! usually not fun or easy to do
torint said:
Hello, I wasn't able to find anything but does anyone know of any settings or a program that will lock the clock on the home screen. The phone unlocks in my holster or pocket and i always hit the clock and keep changing the time.
Click to expand...
Click to collapse
Create an unlock password and it will not unlock in your pocket or holster. Problem is that without a password, the phone will unlock when it thinks the keyboard is slid out. It can think this if 1) keyboard is slid out 2) phone come in close proximity with a magnet (some holsters have magnetic covers)
Have had my new Sprint TP2 for a couple of weeks now, really enjoying it. First "smartphone" for me, figured it's time to join the 21st century.
Biggest issue so far:
When putting the phone into a holster, it comes out of sleep mode (display comes on) - no, I'm not hitting the Power key when I do this. Something here doesnt seem right, but that's what happens...
At that point, on occasion the Dial key may get hit while in the holster (I can understand this, it's a hardware key) - which if the key kets tagged 2x while out of sleep-mode does a pocket dial to the last number called/received.
My original fix to this was to enable the password lock. While a PITA to unlock the phone every time, I'd rather do that than pocket dial. HOWEVER, when running an output only app (such as Google Maps or Navigation) the phone keeps going into lock mode and asking for the password - NOT a good situation while driving down the road...
So my question(s) are:
1. Is there a way to keep the phone from exiting sleep mode while entering a holster?
2. Is there a way to keep the phone from locking up and requesting a password during apps such as Navigation?
(I found this thread while searching, but still un-answered... [Thread 614599; vBulletin wont let me post the URL...)
Thanks in advance for any help!
Jim
This is a completely stock phone, no mods (so far...) other than a couple of applications added (Google Mobile apps, WSOP Poker).
The first question I have for you. Is the case/holder specific to HTC TP2 or is it generic and originally designed for a blackberry?
I ask this because no matter what blackberry case i've ever tried, they always bring my phone out of sleep mode. The reason is the magnet in the case that is designed to put the BB INTO sleep mode.
The case is specific for the Sprint TP2, from ThinkTouchPro2.com. It's the [HTC Touch Pro 2 Naztech Kaskade Vertical Pouch Case - Black], since I still cant post a url... well, I guess I can fake one:
thinktouchpro2.com/htc-touch-pro-2-cases-7462.html
It's definitely the magnet that's doing the trick. The phone comes out of sleep mode just as it starts to go into the case, so it's not a function of hitting any buttons.
Somehow I got into the habit of hitting the power button to put it to sleep before going into the holster, SOOOO thinking maybe it's a 2-way deal I tried leaving the phone awake and putting into the holster - no dice, still awake.
Test 2 was to put the phone into the holster, and then force to sleep. Removing it wakes the phone up, that I'm cool with. But I'm still left with the issue of pocket dialing whenever I use the holster...
Maybe the best solution would be to go to a non-magnetic holster?
Jim
that would be it.
The device uses a magnetic switch to tell it when you slide the keyboard out. So by pulling the device in/out of the case the magnet is triggering the switch leading the device to think you've slid out the keyboard and it should wake up.
I think Advanced config has an option to disable the device from waking up when the keyboard is slid open.
Actually I believe it's the magnet on the stylus, it doesn't have anything to do with the sliding function.
There was a solution for this somewhere around the forums.
If I'm not mistaken, removing the "wake up when keyboard is out" setting, solved the problem with cases that have a magnet.
j0shtalgia said:
Actually I believe it's the magnet on the stylus, it doesn't have anything to do with the sliding function.
Click to expand...
Click to collapse
my laptop uses a magnet to secure the screen when i close it and if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
dont think the stylus magnet would cause it because the stylus is still in the device and the magnet is securing it in. I think it has another sensor in the stylus slot and just uses the magnet to suck it in because on older devices (wizard) the stylus would go loose, but then again those devices didn't wake when the stylus was removed.
fone_fanatic said:
my laptop uses a magnet to secure the screen when i close it and if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
dont think the stylus magnet would cause it because the stylus is still in the device and the magnet is securing it in. I think it has another sensor in the stylus slot and just uses the magnet to suck it in because on older devices (wizard) the stylus would go loose, but then again those devices didn't wake when the stylus was removed.
Click to expand...
Click to collapse
Ah, I see. Interesting!
fone_fanatic said:
... if i slide my tilt2 across where the magnet is with the stylus in or out, the device wakes up and goes into landscape for a second then switches back to portrait.
Click to expand...
Click to collapse
BINGO, think we're onto it as I've seen this behavior as well.
I've poked around looking for this, but the closest I've found is the "Keyboard Sliding Sound", but there's not an option to kill the wake-up function. Can someone point me in the direction of the "Advanced Config"?
Jim
So why not use pocket sheild? It has a 15 sec timer on it, so if you put it in your holster and it "wakes up", after 15 seconds it will turn the phone off again if there isn't any action done on it. Use it to only turn on with the light sensor when you pull it out of you pocket or a finger swipe from top to bottom. Also, you can tell it what apps that it cannot go into sleep mode on.
aj48198 said:
So why not use pocket sheild?
Click to expand...
Click to collapse
That's actually on my list of apps to take a look at, but for a different reason. I'd still like it to not come on at all, as the pocket dial I made was well w/in the 15s timeout for PS.
Ok, so the search originally didnt work for me because I didnt realize it was the magnet causing the wake-up. Knowing that now, I found the registry change I need to make in another thread.
Now for the total noob quesion:
How do I get into the registry to edit it?
I gather Total Commander is the popular tool of choice, and now have that installed. But my searches keep coming up with various tweaks to MAKE in the registry, but not how to GET TO it. I was unable to find this in the TC docs, either...
Thanks for the patient assistance to a WM noob.
(tho I'm a .Net programmer, so not a complete ijit - unless you want to hold being a .Net programmer against me, which I really couldnt blame you for - but it beats the heck outta COBOL...)
Jim
PHM Registry Editor. I would have posted a link but I don't have enough posts to do so!! Just google it and it should come up I got mine off of freewareppc com
Pocket Sheild will not let anything happen what so ever. Unless you physically make it happen, it will do nothing but sit there at the unlock screen waiting for input. If nothing happens, the screen will go back into sleep mode. Check the website out, that should help you make your decision easier. You can change the timer to be 10 seconds as well but I think that is about as close as you can get beside turning the phone off!!
SailCO26 said:
Have had my new Sprint TP2 for a couple of weeks now, really enjoying it. First "smartphone" for me, figured it's time to join the 21st century.
Biggest issue so far:
When putting the phone into a holster, it comes out of sleep mode (display comes on) - no, I'm not hitting the Power key when I do this. Something here doesnt seem right, but that's what happens...
At that point, on occasion the Dial key may get hit while in the holster (I can understand this, it's a hardware key) - which if the key kets tagged 2x while out of sleep-mode does a pocket dial to the last number called/received.
My original fix to this was to enable the password lock. While a PITA to unlock the phone every time, I'd rather do that than pocket dial. HOWEVER, when running an output only app (such as Google Maps or Navigation) the phone keeps going into lock mode and asking for the password - NOT a good situation while driving down the road...
So my question(s) are:
1. Is there a way to keep the phone from exiting sleep mode while entering a holster?
2. Is there a way to keep the phone from locking up and requesting a password during apps such as Navigation?
(I found this thread while searching, but still un-answered... [Thread 614599; vBulletin wont let me post the URL...)
Thanks in advance for any help!
Jim
This is a completely stock phone, no mods (so far...) other than a couple of applications added (Google Mobile apps, WSOP Poker).
Click to expand...
Click to collapse
I think this is what you need:
1) this is a magnet holster issue -- FIX: from wmexpert touch-pro-2-tip-fix-cases-magnets-issue-registry-fix *attached Cab
2) To stop certain apps from locking automatically I use S2U2 *zip attached (Slide to Unlock) there is a list of applications that you can set not to lock when active. I use this for GPS navigation for example. showthread.php?t=527523
You can set a password with this or not as you wish. You'll like it.
Keep in mind that the one sideeffect of the magnet fix is that the phone will not automatically unlock on opening the keyboard. You have to hit the power button. Personally I don't have any problem with this.
aj48198 said:
Pocket Sheild will not let anything happen what so ever. Unless you physically make it happen, it will do nothing but sit there at the unlock screen waiting for input. If nothing happens, the screen will go back into sleep mode. Check the website out, that should help you make your decision easier. You can change the timer to be 10 seconds as well but I think that is about as close as you can get beside turning the phone off!!
Click to expand...
Click to collapse
well he is making it physically happen, but unintentionally. The magnet in the holster is waking the device up by making it think the keyboard has slid open, then the call button is being pressed against the case causing the device to place a call.
as i stated earlier, its best to disable wake-up when keyboard is slid out which is provided in a cab in the post right before this one.
Thanks aj and fwp, I think I've got it now.
Backed into a copy of the PHM RegEdit, and the slide fix worked great! No worries about the kb not waking the phone up, never used that function anyway.
Re the S2U2 app and preventing lock during some apps, does PocketShield also do this - or would I need to run both to keep GPS apps alive?
Thanks again!
Jim
fone_fanatic said:
well he is making it physically happen, but unintentionally. The magnet in the holster is waking the device up by making it think the keyboard has slid open, then the call button is being pressed against the case causing the device to place a call.
as i stated earlier, its best to disable wake-up when keyboard is slid out which is provided in a cab in the post right before this one.
Click to expand...
Click to collapse
I get that, and if the cab fixes the issue, thats great. What I was saying was that pocket sheild will not unlock at all, be it the keyboard slid open or the stylus came out, unless you program it to do so. I just tried to make it unlock by sliding the keyboard open and the only thing it did was go into landscape, still locked tho.
aj48198 said:
I get that, and if the cab fixes the issue, thats great. What I was saying was that pocket sheild will not unlock at all, be it the keyboard slid open or the stylus came out, unless you program it to do so. I just tried to make it unlock by sliding the keyboard open and the only thing it did was go into landscape, still locked tho.
Click to expand...
Click to collapse
ahh ok, not familiar with that app and thought you were saying that it would wait for an input (i.e. buttons pressed) for a set time, and if nothing happened then it would lock the device after a set time period.
SailCO26 said:
Thanks aj and fwp, I think I've got it now.
Backed into a copy of the PHM RegEdit, and the slide fix worked great! No worries about the kb not waking the phone up, never used that function anyway.
Re the S2U2 app and preventing lock during some apps, does PocketShield also do this - or would I need to run both to keep GPS apps alive?
Thanks again!
Jim
Click to expand...
Click to collapse
PS does do that (preventing lock during some apps) You just have to tell it when you are in the settings.
Thanks for all the great info! Have the phone "safe" now, but will be looking into PocketShield as the next app.
Jim
I'm having a problem with the slide down to unlock the phone.
When the phone rang I pull the phone out from my jeans pocket then it accept the phone call automatically because the screen touches my legs during pulling it up the phone unlocks.
Are there any ways to change the way to unlock the screen to the Original android?
I have tried the Lock bot already,but it's laggy and doesn't lock the phone when someone calls .
PS. sorry for my english isn't perfect
I have the exact same problem. Everytime I pull the phone out of its case it answers the call. Its getting very annoying. Is there at least an app to make the lock screen slide sideways to unlock instead of down? Thnx.
It hasn't happened to me yet... but these are the small things that make me wonder what the hell are people at HTC thinking?
Vertical slide for call answering? There are bound to be problems...
DimitrisC said:
I have the exact same problem. Everytime I pull the phone out of its case it answers the call. Its getting very annoying. Is there at least an app to make the lock screen slide sideways to unlock instead of down? Thnx.
Click to expand...
Click to collapse
So easy... put it standby button down screen pointed at your leg...
Never ever had a call in my pants, but I agree a horizontal lockscreen would make more sense...
Stafflover said:
So easy... put it standby button down screen pointed at your leg...
Never ever had a call in my pants, but I agree a horizontal lockscreen would make more sense...
Click to expand...
Click to collapse
yah thats the best option, i do the same and have never picked a call unwanted
"Locking" the keypad on my old candy bar phone made sense - if you didn't, buttons were always pressed and people were sometimes dialed from your pocket. I can also see the case for a lockscreen on the iPhone, for example, since maybe its home button can be pressed accidentally as well. However, for the EVO and for the Pre I had before it, the only way to turn on the device is via the power button up top, which is surely not going to be pressed on accident (especially with the EVO where it's only slightly raised and must be pressed deliberately). Because of this, the lockscreen serves practically no purpose, except to add an extra redundant step before using your phone. It might be more useful if it showed all recent notifications on it webOS-style, but since it only shows the most recent one, it's not very good for that either, and it isn't a big deal to pull down the shade once you're in the phone.
So, unless you actually secure your phone with a password/gesture/PIN, is there really any point to the lockscreen?
Im going to go on a guess here but the purpose of the lock screen is , in the event that the phone is in your pocket "Granted highly unlikely" the button does get pushed another process of slidding your finger down the screen to unlock would also be needed . I believe the phone sitting in a pocket or a purse or case it would be even more difficult for the sliding motion on the screen to happen . Just an extra safe guard more or less .
You can use SwitchPro Widget to disable the lockscreen if you want.
Because its part of Android and the Evo isn't the only Android phone.
...yep.
nebenezer said:
You can use SwitchPro Widget to disable the lockscreen if you want.
Click to expand...
Click to collapse
Is there an app or a way to just use the pattern lock as opposed to the slide down lock? I'd rather just have the pattern lock when unlocking rather than the swipe screen lock and then a pattern lock.
Also no lock works like a charm.
Sent from my EVO using XDA App
engagedtosmile said:
Because its part of Android and the Evo isn't the only Android phone.
...yep.
Click to expand...
Click to collapse
This is one reason. The other is simply because iPhone has it and it is Android competition, there is no denying that the development tries to outdo each other.
I do understand the OP's reasoning, with the build of HTC EVO 4G, lockscreen is not necessary. On the other hand, it is advised to lock your screen with either PIN or pattern just in case you lose your device. It is part of personal security responsibility.
ritzbrie said:
Is there an app or a way to just use the pattern lock as opposed to the slide down lock? I'd rather just have the pattern lock when unlocking rather than the swipe screen lock and then a pattern lock.
Click to expand...
Click to collapse
I'm using the latest CM6 nightly ( so i have the Vanilla lockscreen ) & if i have a pattern set, that is what i see when i press the power button, & after entering the pattern, my phone is unlocked. No need to swipe before or after.
Not sure what ROM you're using, but if it possible to use the Vanilla Lockscreen, you can probably get the same result.
Veritas06 said:
I'm using the latest CM6 nightly ( so i have the Vanilla lockscreen ) & if i have a pattern set, that is what i see when i press the power button, & after entering the pattern, my phone is unlocked. No need to swipe before or after.
Not sure what ROM you're using, but if it possible to use the Vanilla Lockscreen, you can probably get the same result.
Click to expand...
Click to collapse
Stock Sense, unrooted. If you put the pattern on you first have to unlock the screen before you can do the pattern. It is pretty retarded.
My phone's screen turns on occasionally for certain notifications and alerts, and if it isn't for the lockscreen, in the 30 seconds it takes for the screen to turn off again, i can easily butt-dial someone or do something else stupid.
ritzbrie said:
Stock Sense, unrooted. If you put the pattern on you first have to unlock the screen before you can do the pattern. It is pretty retarded.
Click to expand...
Click to collapse
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
Are their any special instructions for doing this? Im on Evo with 2.2 and I still get the swipe screen with the pattern or PIN enabled.
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
Are you sure...I don't see such a setting.
lacrossev said:
My phone's screen turns on occasionally for certain notifications and alerts, and if it isn't for the lockscreen, in the 30 seconds it takes for the screen to turn off again, i can easily butt-dial someone or do something else stupid.
Click to expand...
Click to collapse
I'm sorry, normally I wouldn't clutter up xda with an off topic post, but I actaully lol'ed at butt-dial - never heard that term before
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
I too was unable to get this to work. I saw no setting to disable the slick to unlock.
you would really think it would be near impossible to butt-dial someone on the EVO, but leave it to me to prove to be the exception to the rule, I had the lock screen enabled even!!! and somehow in my pocket I called the same guy like 3 times over on the drive home one day... lucky it was a good friend of mine.
Come on, we all know why: Because the iPhone had one. If every other phone didn't have a lock screen, imagine the kind of elitist harassment we'd get from the Apple camp.
"Oh, your screen just comes on? Strange. My iPhone has a lock screen. I just swipe my finger and it unlocks, it's way cool. I can even put a lock code on it. But, no, your phone is cute. I like the little robot guy."
And so forth.
mrass26 said:
you would really think it would be near impossible to butt-dial someone on the EVO, but leave it to me to prove to be the exception to the rule, I had the lock screen enabled even!!! and somehow in my pocket I called the same guy like 3 times over on the drive home one day... lucky it was a good friend of mine.
Click to expand...
Click to collapse
wait, what the hell...? You keep your phone in your back pocket? sitting on it?
May the Evo gods have pity on your soul... don't you know it gets its own front pocket, no keys, no coins, no lint, no nothing!
ScrapMaker said:
wait, what the hell...? You keep your phone in your back pocket? sitting on it?
May the Evo gods have pity on your soul... don't you know it gets its own front pocket, no keys, no coins, no lint, no nothing!
Click to expand...
Click to collapse
Lol...I dedicated a pocket too. Nothing is allowed in my right front pocket but my phone. I have to force myself because with my g1 I had gotten to the point where I didn't care.
ccicchitelli said:
I too was unable to get this to work. I saw no setting to disable the slick to unlock.
Click to expand...
Click to collapse
It may be different depending on which ROM you're running, but I was able to get the pattern unlock without the slide unlock with CM6 RC1 using this method:
- Settings
- Location and Security
- Set up screen lock
- Pattern (add pattern here)
I've had a good search and this problem's come up quite a few times but I haven't found a working solution. To answer/reject calls the Desire requires a vertical swipe. This obviously causes problems when removing from a pocket. First off an F- for HTC in Product Design. You should test your products before producing them!
Ok, so what is the best solution? I don't understand the technology well, so I'm not looking for any complicated solutions - ideally I'd like a tested app. Can anyone recommend one from experience? Otherwise can anyone recommend another solution, other than orientating or holding the phone a certain way? Everyone's obviously in the same boat here. Thanks.
It's a capacitive screen.
You shouldn't be sliding the screen even if the screen slides against your pants. Don't put your fingers on the screen when taking it out.
It's the simple answer you don't want, but you're probably not finding any other results because it is that simple.
Slide to answer is similar to slide to unlock however, so you might have more luck finding workarounds that change the unlock mechanism and see if they happen to mention ways to change slide to answer.
Mr Playdo said:
I've had a good search and this problem's come up quite a few times but I haven't found a working solution. To answer/reject calls the Desire requires a vertical swipe. This obviously causes problems when removing from a pocket. First off an F- for HTC in Product Design. You should test your products before producing them!
Ok, so what is the best solution? I don't understand the technology well, so I'm not looking for any complicated solutions - ideally I'd like a tested app. Can anyone recommend one from experience? Otherwise can anyone recommend another solution, other than orientating or holding the phone a certain way? Everyone's obviously in the same boat here. Thanks.
Click to expand...
Click to collapse
When I used Sense ROM (switch to Oxygen some time ago) I used WidgetLocker with the option to hide an incoming call activated. I basically added an vanilla style slider (slide to right to unlock) over HTC's slide down to answer.
Is not a perfect solution because
- the program it's not free
- you have to swipe twice (once to right, once down) to answer a call
But it saved me a lot of trouble with answering too soon or rejecting calls
You could also try Incoming Call Plus, I didn't had the chance.
Alegis said:
It's a capacitive screen.
You shouldn't be sliding the screen even if the screen slides against your pants. Don't put your fingers on the screen when taking it out.
It's the simple answer you don't want, but you're probably not finding any other results because it is that simple.
Click to expand...
Click to collapse
I hope for mankind's sake that you are not a designer. Ps it occurs too when removing it from a slide-in case, where my fingers have no connection with the screen.
@dboy - is it simple a matter of installing an app and then you have 'slide right to unlock' and it won't install anything else on the phone?
Has anyone tested Incoming Call Plus?
Mr Playdo said:
....
@dboy - is it simple a matter of installing an app and then you have 'slide right to unlock' and it won't install anything else on the phone?
...
Click to expand...
Click to collapse
You install the apk and you get an alternative lockscreen that, among others, features slide right to unlocked on incoming call.
It has many other options: place any widget on lock screen, unlock by trackpad, custom sliders, show/hide notification bar, allow/disallow interactions on lock screen
Like any other market purchase you have 15 minute to decide if you want to keep it or click refund.
I use Lookout to make sure no malware lands on my phone, and so far I had no problems, it only changes my lockscreen.
Mr Playdo said:
I hope for mankind's sake that you are not a designer.
Click to expand...
Click to collapse
You give me too much credit, kind sir.
Mr Playdo said:
Ps it occurs too when removing it from a slide-in case, where my fingers have no connection with the screen.
Click to expand...
Click to collapse
Not with mine. So you're saying HTC design gets an F- for not testing the product with your particular conductive (there's your problem) case in your particular situation? That seems rather blunt.
If you don't want to try out Incoming Call Plus/whatever you could replace your case with a nonconductive one.
You can solve it with WidgetLocker as someone already told you.
Before widgetlocker I also saw sometimes that the Sense slider moved when I took the phone out of my pocket or my slide-in case, but never as far as it would accept the call.
Now I am using WidgetLocker with Sense slider but it does not use this vertical swype to accept calls. Does anyone know if there is an option to activate it? I would like to use the vertical swype in combination with WidgetLocker.
Thanks
chrismast said:
....
Now I am using WidgetLocker with Sense slider but it does not use this vertical swype to accept calls. Does anyone know if there is an option to activate it? I would like to use the vertical swype in combination with WidgetLocker.
Thanks
Click to expand...
Click to collapse
WidgetLocker -> Menu -> Settings -> Popups -> Hide Incoming Call.
If check it should hide the vertical slide beneath a horizontal one. Uncheked it should show only the vertical slide.
dboy0911 said:
WidgetLocker -> Menu -> Settings -> Popups -> Hide Incoming Call.
If check it should hide the vertical slide beneath a horizontal one. Uncheked it should show only the vertical slide.
Click to expand...
Click to collapse
If I check it, WidgetLocker hides the call and I have to unlock first, then get the screen with the green and red button to accept/reject the call. If i leave it unchecked this screen will pop over the widgetlocker slider. But its both not what I want . I would like to have the slider (that you can slide down for accept and up for reject) poping up when someone is calling me. Is this possible in WidgetLocker or not? Cannot find any option to activate it, just got the normal slider but without this function.
chrismast said:
If I check it, WidgetLocker hides the call and I have to unlock first, then get the screen with the green and red button to accept/reject the call. If i leave it unchecked this screen will pop over the widgetlocker slider. But its both not what I want . I would like to have the slider (that you can slide down for accept and up for reject) poping up when someone is calling me. Is this possible in WidgetLocker or not? Cannot find any option to activate it, just got the normal slider but without this function.
Click to expand...
Click to collapse
Can you check if Behavior -> Show in Call is checked?
dboy0911 said:
Can you check if Behavior -> Show in Call is checked?
Click to expand...
Click to collapse
nope its not.
i am searhcing for the same answer..an ideea anyone?
If you're having problems with pocket answering calls, try this app. I've asked the developer to add some sort of incoming call protection, which he did. It works great for me. Before answering/rejecting a call, you have to short-press a precise software button. There's no way it can be pressed while in the pocket.
Later Edit: The feature is also be present in the free version, so try that one first.