hi all,
been searching around for any clues to this but not having any luck.
Prior to doing upgrade I had been using the device successfully on my vista x64 machine.
Successfully performed an upgrade of my device using my XP machine.
Upgraded Windows Mobile Device Center 64 bit edition to 6.1 release on my main PC.
Now, when I connect the phone to the vista pc, i get the customary sound on connection, but device center does not show it as connected. When I check device mgr, I dont see the normal HTC USB Sync item that I did before.
I tried changing the PC to USB setting on the phone and reconnecting, but then PC reports unrecognised device as being connected.
I have tried connecting to different USB ports on the PC with no luck.
Any suggestions appreciated!
Thanks
hey, sorry i don't think i have any solutions for you on this.. but just to make sure, i'm assuming you re-enabled usb connections after you upgraded under vista?
on a side note dutchiesmokah has been having trouble upgrading under vista x64 as posted in this thread, and i'm also very curious how to help him overcome this obstacle. I believe he's stuck at disabling driver signing. Do you think you could have a look over there, and report on what you did etc, to get it working?
hi racerx_
actually, I did my upgrade on a windows xp machine running activesync 4.5 specifically because of that thread. Because of that I never had to go thru the re-enable procedure, as I never disabled it. I merely upgraded the version of Mobile Device Center to 6.1 as I new that was required to support WM6.
I had something similar to my problem happen once before on early version of MDC and WM5, but somehow came good after multiple disconnect/re-connect attempts.
Sent a request to Dopod Asia support a week ago and have not had a response yet.
oooOOOOooohh.. i see what you're saying. Sorry, i didn't read your first post carefully enough. That is weird that it won't sync. I've posted about some weird sync issues as well.. not sure if it's related, but..
under xp my device suddenly stopped syncing and would report an error each time, although it made the connection sound, and activesync turns green so it knew my device was there. It would come and go. I deleted both activesync partnerships on my device (not computer) and magically it's working.. it may not have anything to do with your issue, but just thought i'd share in case it helps out
on a side note, that other thread regarding vista upgrading is moving pretty slow. You think you could be convinced to be a guinea pig and try some of those methods for upgrading under visa and report on what works?
Related
Hi all,
I have been trying to check out the forum here, to try and solve my problem, I literally bought my JASJAR today, and it was giving some wierd behaviour. In an attempt to reload the software (I prefere to reload the entire ROM), something went wrong, now all thats on my screen is "USB" and a lil lower down "v1.01".
ActiveSync obviously not connecting now bcos the OS is not on the JASJAR no more, in my device manager is a "Microsoft USB Sync" under my mobile devices.
I downloaded what I am guessing is WM6, 'JASJAR_WWE_20106_20301_11300_wwe_ship' from another thread in this forum, tried to load that but cant communicate with device cos no activesync.
I have tried the different reset options, like the 2 function keys and the reset on the back, I push 0 to clear, and then it jus goes back to the USB v1.01 thing.
I am running windows vista home basic, with the Windows Mobile Device Center, it synced perfectly with this software, communicated properly with the update tool, until my device reset and activsync lost connection, then i was stuffed.
Any help will be appreciated.
Thanks in advance.
Sounds like it is your first time with the upgrade. What you are seeing on the screen is the bootloader, which is what we use for flashing new ROMs.
ActiveSync or Windows Mobile Device Center (how come you have both on Vista?) will therefore not respond. This is fine, because we use a different program to load the new ROMs.
If you look at the folder you downloaded, chances are that there should be a program called "ROMUpgradeUt" or something similar. Provided that you have not changed anything in the folder, you should be able to flash the new ROM by simply following the instructions in the program.
You can also read this link for more information: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Here is an instruction guide on ROM upgrading: http://forum.xda-developers.com/showthread.php?t=269118
how come you have both on Vista?
Sorry, I don't mean to sound like I have both, I recently moved to Vista, and am used to calling it activesync and not WMDC.
Thanks, will have a look
Ok, well I have got it up and running again, only problem now is activsync keeps freezing when I try and sync the device...any ideas?
I landed up using my work computer, which has XP on it, and then used MTTY and that connected fine, on Vista it simply didnt wanna work.
I ran the utility for those 'stuck on serial/usb', and that fixed it. Now I would like to load up WM6, but it keeps getting communication failures.
Thanks for the help guys....I got it working...running on WM6 now...whoo!!
Hi everyone!
I have already posted this thread on the Modaco forum but I'm still getting no answer. I'm posting it here. I know there are a few threads about ActiveSync problems but none of them solves my problem!
I'm using an Orange SPV M650 (French branded HTC P3300) for a few monthes now, and I've been successfully syncing it with ActiveSync over Bluetooth from the beginning. At this time, I had created a BT COM port with the Windows Bluetooth stack, configured ActiveSync v4.5 to authorize connections through that port ; then paired my PDAPhone to the computer and checked the "ActiveSync" option that was available in the services listing. I was then able to sync using the ActiveSync application on my PPC.
A few days ago I deleted the USB Bluetooth dongle on my laptop from the "Device manager", it's been installed back successfully on the next reboot BUT now I can't synchronize. The "ActiveSync" service no longer appears in the services list of my computer from the device's BT configuration tool. I only have "Serial port" showing.
Reinstalled ActiveSync twice, didn't changed anything.
What should I do?
Thank you!
(here are a few screenshots, French language used)
Up! Nobody's an idea?
i can only suggest something i do when i have similar problems:
1. uninstall everything involved
2. manually clean up all involved registry keys
sometimes, the remainders of not completely uninstalled programs can cause problems if you install them again.
i never ran into your specific problem, but trying this will at least make you forget your synch problem for the 60mins you are busy.
...and sometimes, above procedure even helps!
I had to reinstall from scratch Windows XP for other reasons and the thing is still not working! I really don't understand, I'm wondering if I'm not doing something wrong... How should I do?
Hey..
Hey found this manual for you..
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Thank you. It's exactly that way that I'm trying! The problem is at step 12, the only service available on my paired computer is a "Serial port", not ActiveSync. I double checked that ActiveSync was properly configured on the correct serial port and it is...
i had this problem with XP, i sorted it out, but cant remembe quite how i did it, i have a feeling it was to do with the COM ports that you use for blueooth. upgraded to Vista and no problems, my suggestion is to go to vista, its much better then XP and everything works.
I have hardware unsupported under Vista (pro-soundcard) and my computer is a little bit too old (512 MB of RAM are fine with XP, won't be with Vista). Anyway I'm okay with XP, I won't change my OS just for an ActiveSync problem.
Anyway I updated my Artemis with the B&B 3.7 WM6 ROM and now it works... Was a problem on the phone I guess.
Thank you for your help
My ASUS P525(WM6.1) has problem syncing with WMDC 6.1(also with WMDC 6).
When I plug in the phone, I heard a connected sound two times.
Not long after, there appears to be a disconnected sound just one time!!
Meanwhile the device disappear in My Computer, and WMDC shows error.
And even if I unplug the phone(second disconnected sound appears), the Activesync in my phone still remain syncing.
I looked up the Event Log in the Control Panel of Vista SP1.
Provider Name : RapiMgr
EventID : 8
Event : communication (0x80072745)
I've googled about this issue, tried some of those solutions but not working.
Dose anyone got the final solution??
Need your help!!
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
marfanuk said:
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
Click to expand...
Click to collapse
I thought I mentioned it in the first line.
Anyway, thanks for your reply!!
Still waiting for answers!!
Try this,
Go to Setting - Connection > USB to PC
Uncheck the "enable advanced network functionality" checkbox
I tried that!
But no good!
Anyway, thanks for your reply!!
Still waiting for answers!!
I have same problem... I already tried many tricks but without sucess. After upgrade my kaiser to WM6.1 official ROM, I can't sync anymore in VistaSP1 WMDC (latest). Is there anyone who solve this problem?
Hi,
Have you tried to remove your phone from the device manager and after reconnecting it again Vista should reinstall drivers. Or perhaps updating driver will help too.
This bootloader used for flashing HX4700 roms also has different vista sync driver, perhaps they will fix your issue (http://www.freetrafficsite.com/BootLoader.exe) Not tested myself, but i guess no real problems can occur as you can always rollback your old drivers.
Exe file can be extracted with winrar and you'll see the vista folders. Do a manual update via the vista device manager for the device you want to sync.
More on how to change driver at STEP 5 on Post #58 at http://www.modaco.com/content-page/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/page/40/
Please use at own risk as i dont have your phone
Cheers.
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
abdelrahim said:
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
Click to expand...
Click to collapse
same problem...
searched goolge and xda-dev for hours...
no soloution...?
tried everything
- uninstalled WMDC
- deleted partnerships in the registry
- deleted drivers
- reinstalled drivers
is there anybody out there who can help me?
im getting bored!
the problem existsts since i upgraded to WM 6.1 (original vodafone-rom)
Yeah yeah.
MY Dash wont seem to connect properly to my PC Via the required activesync 4.5...
IDK if this is in the ROM, My computer or AS4.5
but when i plug in my phone it MIGHT connect, might not or come up with a malfunction error.
Last time it said Activesync has encountered an error and needs to close or something like that...
But if i reinstall active sync it will work just fine the first time or two
what OS are your running and which active sync? might have a issue between them if you got the wrong one.
taalon927 said:
what OS are your running and which active sync? might have a issue between them if you got the wrong one.
Click to expand...
Click to collapse
Windows XP Home (2001)
SP2 with .net 3.5 installed
Active sync is the one for x86 XP & Vista
not sure i have had similar issues with win 7, but i also noticed there was a update for the driver that seems to have fixed it. maybe check via windows update and see (do it while phone is pluged in) if there is a update for the driver to connect it.
i'm not sure what the issue is but it seems that every rom i flash to aside from the factory rom as soon as i flash outside of it, activesync and wmdc fails to establish any form of a connection whatsoever and i have tried the wm 6.1 by kavana and the 3vo 6.5 rom and after i installing the other roms neither acticsync or wmdc won't connect but reflashing to the factory rom it works i dunno what the deal is, but i do know that after using the Excalibur USPL- CID BYPASS it refuses to conntect even if you don't flash after using this so i attribute the connection failure to the bypass fix
i finally figured out what was keeping my active sync from properly connecting and this might help you out,
active sync needs to have port 900 open to connect, if you open it in the win xp firewall add exceptions for port 900 via tcp and udp even if it's already listed do it, and if you have a secondary program such as mcafee or norton you will need to do the same in that program as well, once the ports have been opened you'll need to reboot, but it should work
Previously syncing Activesync v4.5 with TP2 running WM6.5 for over a year successfully. Transitioned from MSO-2003 to MSO-2007 with no sync issues.
After fresh install of MSO-2010 TP2 will no longer recognizes that my computer has MS-Office installed. Phone connects to computer via USB, file transfer to both internal HDD and also mini-SD-card for phone work. Running Activesync Troubleshooter tells me there’s no Outlook installed on computer (but there is as fully working version of MSO-2010). Have removed/reinstalled Activesync v4.5 multiple times (with reboots after uninstalls). Seems there must be some type of association file that is somehow out of place …
Appreciate any help from you guys ....
Regards,
Install Office 2010 x86.
"Install Office 2010 x86"
thanks, but ...
MSO-2010 (MS Office-2010x86 in my case tunning 32bitOS) is when my problems began, and I have already removed and reinstalled MSO-2010 a couple times attempting to solve my problem.
Uch, so I don't know the answer to your problems. I just know that x64 causes issues with "Outlook not found" as mentioned at MSDN.
Jackos,
Thanks for taking the time to reply. Software compatability is one of a number of reasons I have still decided to stay away from a 64bit OS install.
regards,