Develop Bugs

AKU3.2 Rom for Universal (until 21.12.06)

New thread
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908

Old versions which are good but not the newest
Look here:
http://forum.xda-developers.com/showthread.php?p=1082908

Look here:
http://forum.xda-developers.com/showthread.php?p=1082908

Ahhh... new ROMs are so exciting! How much free RAM after install?

I do the upgrade it's ok

This is the first time I tried your ROM. So far I have no complaints. Speed is comparable to Indra's Beta 5 without anything installed. Both your ROM (Ivan) and Indra feels a little faster than JWright's 1.90.96. What I like about your ROM is the clean look it has, like an official Microsoft released ROM. Thank you for this ROM.

thank you
my very first upgrade
works perfect

Thanks, I'll try it later this week (currently running your beta14)
One Question: you mention
'No Extended Rom needed anymore'
in your changelog. Does this means I no longer have to unlock the Ext_Rom manually? Is it available for use right after flashing, or am I misunderstanding something here?

thanks, very very good work, but this is a transitory rom... well.. when the great change?

Some screen shots plz
Lt.Cmdr.Ivan said:
This is a AKU3.2 Rom.
If you have questions what AKU is about, read this:
http://www.mobile-review.com/pda/articles/wm-aku-en.shtml
Some features from AKU3 on Modaco:
http://www.modaco.com/index.php?showtopic=246614
OS 5.1.342
Build 15605.3.2.0
SP AKU 3.2
newest Beta 15
Very Special thanks to Mamaich because without him the rom wouldn't be as good as it is.
Thanks to venusforu for the plugin pack the should put the Audio/Video files into a working state again.
Old beta14 for reference testing (Speed stability etc.)
ftp://xda:[email protected]_AKU3_WWE/Ivan/UNI_AKU3_2_WWE_IVAN_beta14.rar
NEW AKU3.2 beta15 is on the FTP:
ftp://xda:[email protected]_AKU3_WWE/Ivan/UNI_AKU3_2_WWE_IVAN_beta15.rar
-------------------
Beta15 changes/additions/features List:
CompactFramework 2.0 SP1
Removed Battery icon on top
Pocket MSN works with "non hotmail"(for example [email protected]) adresses
No Extended Rom needed anymore
New MMS Client 3.5.1.5
IA Zip upgedatet
PagePool increased to 6MB
New Ringtone Plugin
New WlanManager
Pocket MSN works with non hotmail adresses
Phonepad included
Pushmail should work
Vista B1 Theme
Added New Battery Icon at bottom (this time it works)
New Camera 3.00 22864
Video Call Support enabled Options screen available now
Smartdialing with options tab
I forgot to mention
USB_HDD function supported
Credits for this go to Jwrightmcps and his rom where i took it from.
Voice Speed Dial Cab from Conchas included in the rar, so you can choose to use it
Autorun function is mapped to autorun.exe again.
Added Improvements from Jwrightmcps BT Stack stuff
Changed Paging settings for speed
----------------------------------------------------------------------------
Please check and verify the programs which function. Especially tests are welcome in this departments:
BB client functionality status unknown
----------------------------------------------------------------------------
As this rom is work in progress it may contain bugs which were removed previously, but not removed from this version. Please check and report bugs and solutions (if you find them).
Bugs: (1 known)
WIFI error1
Universal goes to standby mode with Wi-Fi turned on, then I switch the
device on, and it starts trying to register in Wi-Fi net forever
(shows "tower" but without circle and rays)
Only syncs if you do it manually
Click to expand...
Click to collapse
HI,
CLD ANYONE attach screenshots plz...Excited to look VISTA theme
Thnks

Still Rom date is 09/20/06 and it appers on the startup screen again.

WLan settings are no more accessible after installing German MUI. (Crash)
But that happened on beta 14, too. Seems to be an MUI issue.

melino said:
WLan settings are no more accessible after installing German MUI. (Crash)
But that happened on beta 14, too. Seems to be an MUI issue.
Click to expand...
Click to collapse
Sorry, what is "German MUI issue"?
Thank you...

I do not have the issue of the disconnecting Wifi (the reported "bug")?. So for me an excellent ROM.

Great job once again!!
When I reset the Qtek 9000 I received the message
" sddaemon.exe not present!! "??
Many Thanks

I have installed this rom, after some hour of use the memory ram comes down under 15 mb and must make a soft reset ,but this is normal? someone of you has tried wisbar?for me qtek9000 it is a fantastic device if I resolve the problem of ram ((

babak said:
I have installed this rom, after some hour of use the memory ram comes down under 15 mb and must make a soft reset ,but this is normal? someone of you has tried wisbar?for me qtek9000 it is a fantastic device if I resolve the problem of ram ((
Click to expand...
Click to collapse
Hehe... Don't sweat it. My RAM virtually never goes higher than 12 MB and I have no problems running any applications at all. Cheers!

Camera
Thanks for the update. I'm just wondering how come "New Camera 3.00 still says 22844 instead of 22864 for beta 15? Please let me know. Thanks!

Report on the new ROM (upgrading from O2 UK 1.30.162 ROM):
Booting seems much faster (after installing several apps and having rebooted it a few times). I guess this is due to RAM disk.
True VGA mode is waaay much better than 1.30.162 ROM - system fonts are properly aligned and the only problem I found so far is battery settings and dial pad (the latter is fixable with vinay's application).
Speed and responsiveness seems to be better than my previous O2 AKU2 ROM.
There are a few problems though:
there are some compatibility problems - like InterKey virtual keyboard causes hangs every now and then and it was working perfectly well with AKU2
Battery life seems to be worse than AKU2 - before I had my device on standby with blootooth enabled for the whole working day (8:00-18:00) with an hour of reading with Haali reader and it was hardly below 80% (75 or around). Now it was down to 70 % in the first few hours. And for the curious - I did checked all the usual stuff (receive all beams - off and so on)
Other than that - great

I have installed this ROM, it seems perfect.

M$ official AKU 3.3 here

Many users have asked for the WM5 AKU 3.3 source of my custom ROM for the MiTAC Scoter (AKA MioA701, Mio A700, MEdion MDSP1000, etc...) R020.65a.66.3.3 (AKU 3.3). I actually got the official release of AKU3.3 from the ROM release for the UBiQUiO 501, version 3.00.00. I just used the Mamaich's imgfs_tools and voila! I got a dump folder. Then I applied Bepe's DSMtool and it creates the SYS folder with all the OS packages for WWE. After that it is easy to get the packages into the kitchen.
Enjoy the M$ official AKU 3.3
Regards,
Oki

Cool... thanks man

thanks already ported it for blueangel, i am just flashing it
the another rom that need atention is Herald 1.8 rom
And it works, now it needs a little polishing and wil be perfect
I was unable to port the core but except that everything works just fine
Update: the rom is faster than 3.2, but (there is always but) the phone part of WM does not work, the leds are blinking as normal, show that it has full range, but you can not make a call , and if you open phone related thing the device crashes... but beside this AKU 3.3 is more fast and secure i guess

Noticed more mobile sites are talking about this AKU3.3.
Changes (according to Modaco):
- WPA2 support for WiFi
- improved application for using the device as a modem
- Radio frequency has been fine tuned, should take shorter time to catch radio signal and the roaming problem should be solved
- Protection on the gsm parameter file, will not be corrupted by 3rd party software
- “●” displayed as “123” & “abc”
- Wi-Fi has been fine tuned, please note that IEEE 802.11 b/g means it works with 11g protocol but in the speed of 11b (11Mbp)
- Bluetooth & A2DP has also been fine tuned and fits most of the headset
- Stability been improved
Waiting for some genius to make it compatible with the HTC Wizard/Prophet

mccune said:
Noticed more mobile sites are talking about this AKU3.3.
Changes (according to Modaco):
- WPA2 support for WiFi
- improved application for using the device as a modem
- Radio frequency has been fine tuned, should take shorter time to catch radio signal and the roaming problem should be solved
- Protection on the gsm parameter file, will not be corrupted by 3rd party software
- “●” displayed as “123” & “abc”
- Wi-Fi has been fine tuned, please note that IEEE 802.11 b/g means it works with 11g protocol but in the speed of 11b (11Mbp)
- Bluetooth & A2DP has also been fine tuned and fits most of the headset
- Stability been improved
Waiting for some genius to make it compatible with the HTC Wizard/Prophet
Click to expand...
Click to collapse
Hacking away for the Prophet as we speak

Jesterz said:
Hacking away for the Prophet as we speak
Click to expand...
Click to collapse
Does this mean we gonna skip the AKU3.2 from Faria? And have our own little jewel?

mccune said:
Does this mean we gonna skip the AKU3.2 from Faria? And have our own little jewel?
Click to expand...
Click to collapse
No, I will have my hands on both, but I didn't get an email back from faria about where to download his latest ROM
I think he is very busy at the moment

Jesterz said:
No, I will have my hands on both, but I didn't get an email back from faria about where to download his latest ROM
I think he is very busy at the moment
Click to expand...
Click to collapse
due to some dk i had to take the rom offline .i will let you know were to get it.

faria said:
due to some dk i had to take the rom offline .i will let you know were to get it.
Click to expand...
Click to collapse
There are always idiots
Thanks

If/when there's a 'clean' ROM for G3 then do let is know!

so how did you use imgfs_tools to extract? the ROM is a .DIP and no matter how I try I cant seem to extract anything using imgfs_tools. Thanks for any help.
~mike

first prepare_imgfs WMUPDAT.DIP -nosplit
or you can rename it to nk.nba and do it like usual but with nosplit option, or it will give an error for viewimgfs

xplode said:
first prepare_imgfs WMUPDAT.DIP -nosplit
or you can rename it to nk.nba and do it like usual but with nosplit option, or it will give an error for viewimgfs
Click to expand...
Click to collapse
Thx xplode! I really appreciate it.
~Mike

Quick question for you ROM gurus... the files extracted with viewimgfs, can a file be copied directly to the PPC to use?
Is it missing header info, signature, etc. that would prevent it from working?

joe_dude said:
Quick question for you ROM gurus... the files extracted with viewimgfs, can a file be copied directly to the PPC to use?
Is it missing header info, signature, etc. that would prevent it from working?
Click to expand...
Click to collapse
It depends on the file that you want to get from this ROM. most of them are signed or they are not files but modules, this makes it even harder to export. anyway you can always reconstruct it using itsme's tools or mamaich's tools and that's all. All the data files are not signed and you can use them with no problem... but, do not mix databases from different AKU, they can be different.
Regards
Oki

AKU3.3
Check this out
http://forum.xda-developers.com/showthread.php?t=284887

skype on cingular 8525

Hi,
I have skype on my cingular 8525 and the signal is not clear. I can hear echos and distortions, especially when I call outside the U.S.
I checked the "echo cancellation ON" option on skype, but it's still the same.
I've heard that there's a better skype program for this phone. I'm actually running the latest version given by cingular and WM5 (for now)
Any suggestions?
Thanks a lot!

Go to SKYPE's site and download it. I use that one and make a lot f INternational calls through it. Skype via WiFi is always better than via GPRS/UMTS/3G.

They've just released a new version of Skype (2.2.0.36 I think) so give that a try.

Skype does not mention model # 8525...for Cingular/at&t...
Is it safe to install ? which one should we pick out of the 3 models supported?

The new version does work on the Hermes with voice calls!!! No support Only written messages unfortunately... Need to use the previous beta build Version 2.2.0.20. If you can't find it then I can give you the cab...

I need the Previous Version of Skype 2.1!!!
After upgrading from Skype WM 2.1 to 2.2, I managed to sign-in but noticed my skype-out account was not recognized (no credits were shown) nor did I succeed to make the echo call. Skype just crashed! When I followed the link to activate my skype-out, I got a "page not found" message!. Since I knew I had credits available, I then tried to call using the dial and it crashed as well! This is serious as I had install an old version 2.0.0.39 because my previous version 2.1 was overwritten by the new executable that I downloaded!
BEWARE OF INSTALLATION ON ANY HERMES100 DEVICE

Skype wont work on mine either but X-ten did work brilliantly with other VOIP providers that I use

is working fine only with 2.2beta, voice and data, uninstall and earase all previous versoins, reboot than reinstall this version
http://www.skype.com/download/skype/mobile/downloading_high_beta.html

will try it later...my phone hung :O
my phone wont load pas the Windows Mobile Screen...does anyone know what is wrong????

SKYPE is unable to run under WM6.1?

My device is CINGULAR 8525, I updated the system to WM 6.1, kernel version is 5.2.19174. SKYPE 2.1/2.2 is unable to run under WM 6.1 right now, I installed SKYPE successfully, either CAB or EXE file. But after I tap the icon on TODAY screen, it jumps out.
SKYPE was running well under WM 5.0 and / or 6.0.
Who has experience to run it under WM6.1?
Thanks!

Sorry if I'm not much help, but it does work for me (under 3g Skype or any other program has never worked under WIFI for me)

I'm using the latest version and it's working fine for me.
http://www.skype.com/intl/en/download/skype/windowsmobile/

Skype is ok
Running ShadoW 2.1 and Skype 2.1.56 on HTC Hermes and everything is ok.

Hey Guys,
I've the same problem, but when I tried pay's rom 3.05, skype runs pretty well.
Maybe the problem is the kernel 19174.
And I could not run skype on some of kernel 19199.
Wondering pay more attention to WM6...

JR_de said:
I'm using the latest version and it's working fine for me.
http://www.skype.com/intl/en/download/skype/windowsmobile/
Click to expand...
Click to collapse
Thanks for your prompt,I did download that lastest version per your URL, same as before, SKYPE was jumped out without any message.
Anyway, thank you!

15812220 said:
Hey Guys,
I've the same problem, but when I tried pay's rom 3.05, skype runs pretty well.
Maybe the problem is the kernel 19174.
And I could not run skype on some of kernel 19199.
Wondering pay more attention to WM6...
Click to expand...
Click to collapse
Yes, probably I should be back to WM6.0, if it is a problem for WM6.1.

As I said, on Shadow 2.1 TE - WM 6.1 (build 19199) works Skype without problem and I have no problem also on other WM6.1 ROMs! If You have Hermes, use version, I have mentioned in my first post here, because other versions are NOT working on this type of device (it is caused by device, not OS).

MaRaHoX said:
(it is caused by device, not OS).
Click to expand...
Click to collapse
Processor is the problem. Hermes processor is build on arm9 architecture and Skype does not support it anynore (only messaging works). In other words you need a device with arm11 processor or the earlier version of Skype which supported arm9.
Cheers

Skype runs nicely on 3G and WiFi with Pay's WM6.1 v3.05.

mck062002 said:
Skype runs nicely on 3G and WiFi with Pay's WM6.1 v3.05.
Click to expand...
Click to collapse
The last version of Skype that supported arm9 processors was Skype 2.2Beta version

same problem :s
skype works fine on wm 6.0, but not run with the offical htc rom 6.1 :/

Skype Works!
Hi,
I can confirm that I have tried the current windows mobile version of Skype, available here, and it works well over WiFi with the two latest WM6.1 roms by Dvha79_ddt. The older betas I had been using did not work.
Regards,

I'm running the latest version of Skype (v. 2.2.0.37) on PDAviet WM6.1 (build 19900). It runs pretty fast. Faster than on any ROMs I have tried. Before I cannot use it as PPC to PC call but now its just like pc to pc call, with the absent of video though. I used it over WiFi.

mck062002 said:
I'm running the latest version of Skype (v. 2.2.0.37) on PDAviet WM6.1 (build 19900). It runs pretty fast. Faster than on any ROMs I have tried. Before I cannot use it as PPC to PC call but now its just like pc to pc call, with the absent of video though. I used it over WiFi.
Click to expand...
Click to collapse
works for me now also (build 19199).
I read somewhere on the net a while ago that Skype personel was working to get Skype work with arm9 architecture again, apparently they did it.
Cheers

hi.. i likethe icon of yours.. how to get the htc plugin like ur logo ?

Which BlackBerry Client on my Artemis?

Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy

look in this thread
http://forum.xda-developers.com/showthread.php?t=369269

Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks

I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.

WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy

As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.

All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?

How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.

...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks

Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.

I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.

tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.