Hi,
I have skype on my cingular 8525 and the signal is not clear. I can hear echos and distortions, especially when I call outside the U.S.
I checked the "echo cancellation ON" option on skype, but it's still the same.
I've heard that there's a better skype program for this phone. I'm actually running the latest version given by cingular and WM5 (for now)
Any suggestions?
Thanks a lot!
Go to SKYPE's site and download it. I use that one and make a lot f INternational calls through it. Skype via WiFi is always better than via GPRS/UMTS/3G.
They've just released a new version of Skype (2.2.0.36 I think) so give that a try.
Skype does not mention model # 8525...for Cingular/at&t...
Is it safe to install ? which one should we pick out of the 3 models supported?
The new version does work on the Hermes with voice calls!!! No support Only written messages unfortunately... Need to use the previous beta build Version 2.2.0.20. If you can't find it then I can give you the cab...
I need the Previous Version of Skype 2.1!!!
After upgrading from Skype WM 2.1 to 2.2, I managed to sign-in but noticed my skype-out account was not recognized (no credits were shown) nor did I succeed to make the echo call. Skype just crashed! When I followed the link to activate my skype-out, I got a "page not found" message!. Since I knew I had credits available, I then tried to call using the dial and it crashed as well! This is serious as I had install an old version 2.0.0.39 because my previous version 2.1 was overwritten by the new executable that I downloaded!
BEWARE OF INSTALLATION ON ANY HERMES100 DEVICE
Skype wont work on mine either but X-ten did work brilliantly with other VOIP providers that I use
is working fine only with 2.2beta, voice and data, uninstall and earase all previous versoins, reboot than reinstall this version
http://www.skype.com/download/skype/mobile/downloading_high_beta.html
will try it later...my phone hung :O
my phone wont load pas the Windows Mobile Screen...does anyone know what is wrong????
Related
i found an old version of skype (2.2.018) that works on my trinity with WM6
link
http://rapidshare.com/files/39094837/SkypeWM6PPC.exe
UP
Upppppppppp You Go
works, thx!
I just downloaded the latest Skype, and it quits after it starts connecting to make a call.
Has anyone figured out what the problem is, or do we still have to use the old version?
VOIP seems to be blocked on the new HTC official WM6 release for DOPOD.
Tried to reinstall the required dll through the usual .cab (used before roms cooks stopped removing WM6 VOIP functionalities), and the Internet Calling features appear on today's screen, however it's impossible to have the service working.
Tried the settings .cab I created (always worked with past WM6 roms) and the a program SIPconfigToll (ver. 2.0.1), but none seems to apply the settings and
always receive the same message: Internet Calling: Service Blocked. (not even the service name seems to change).
Any advice?
Internet connection is ok as well as ports, etc.
lellobello said:
Tried the settings .cab I created (always worked with past WM6 roms) and the a program SIPconfigToll (ver. 2.0.1), but none seems to apply the settings and
always receive the same message: Internet Calling: Service Blocked. (not even the service name seems to change).
Click to expand...
Click to collapse
I've installed these two cabs:
MajikVOIP.cab - http://www.4winmobile.com/forums/local_links.php?action=jump&id=24&catid=6
VOIP Drivers.cab from http://wmblack.info/addons/
And VoIP is working fine for me with official WM6 ROM.
sweet
works fine now
thanks a lot
Hi,
I install fisrt MajikVOIP.cab by double click. Let me know the way to install VOIP Drivers.cab?
double click again?
Don't forget to restart after installation
VoIP: Searching...and then...No-Service
Hi Friends:
I have a HTC TyTN with the last Official DoPoD WM6 WWE ROM 3.54.707.3...I'm trying to install the Internet Calling...here are my procedure:
1. I installed MajikVOIP.cab in my microSD
2. I installed VOIP Drivers.cab in my microSD
3. Restart
3. I installed SetupVoIP_v0.3 from Schap (it has proxy, SipConfigTool_2_0_1 doesn't have it)
4. I done my personal settings with SetupVoIP_v0.3
and the Internet Calling done the following:
Searching...and then...No-Service
Can you help me please?
Thanks
TecMan
HTC TyTN
HERM200 IPL-1.04
HERM200 SLP-2.10.01ipro 2.10.Olipro
Device Information (Upgraded 7-13-07)
ROM version: 3.54.707.3
ROM date: 07/05/07
Radio version: 1.47.00.10 (Upgraded 7-11-07)
Protocol version: 32.80.7020.20H (Upgraded 7-11-07)
Windows Mobile 6 Professional
CD OS 5.2.1437 (Build 17944.0.3.1)
eva_d said:
I've installed these two cabs:
MajikVOIP.cab - http://www.4winmobile.com/forums/local_links.php?action=jump&id=24&catid=6
VOIP Drivers.cab from http://wmblack.info/addons/
And VoIP is working fine for me with official WM6 ROM.
Click to expand...
Click to collapse
hi eva_d, I haven't permission for download MajikVOIP.cab. can you provide other link for download? many thanks!
TecMan45 said:
1. I installed MajikVOIP.cab in my microSD
2. I installed VOIP Drivers.cab in my microSD
3. Restart
3. I installed SetupVoIP_v0.3 from Schap (it has proxy, SipConfigTool_2_0_1 doesn't have it)
4. I done my personal settings with SetupVoIP_v0.3
and the Internet Calling done the following:
Searching...and then...No-Service
Click to expand...
Click to collapse
Did you try to reinstall VoIP app in device memory? Did VoIP work for you before? Do you have WiFi switched on? Does your provider/router/firewall block any VoIP ports? I would start with these things first, surely.
alexng167 said:
hi eva_d, I haven't permission for download MajikVOIP.cab. can you provide other link for download? many thanks!
Click to expand...
Click to collapse
Register an account on 4winmobile.com, and then you'll have an access. Simple as that.
alexng167 said:
hi eva_d, I haven't permission for download MajikVOIP.cab. can you provide other link for download? many thanks!
Click to expand...
Click to collapse
Try this, if they are the same files :
http://forum.xda-developers.com/attachment.php?attachmentid=43949&d=1184484873
Hi eva_d:
Thanks for your reply...let me give you my answers:
Did you try to reinstall VoIP app in device memory?
- No, I installed MajikVOIP.cab & VOIP Drivers.cab only in my microSD
- Do you recommend me to install them in device memory?
Did VoIP work for you before?
- Yes, I installed a few days ago, SJ-Labs - SJphone-PPC2003-303c and it worked fine with my VoIP provider
Do you have WiFi switched on?
- Yes, it's a basic...No-VoIP without WiFi
Does your provider/router/firewall block any VoIP ports?
- If SJ-Labs - SJphone-PPC2003-303c worked with my VoIP-Settings, I supposed that I don't have problems with block any VoIP ports
What are your recommendations to fix my problem?
Thanks
TecMan
HTC TyTN
HERM200 IPL-1.04
HERM200 SLP-2.10.01ipro 2.10.Olipro
Device Information (Upgraded 7-13-07)
ROM version: 3.54.707.3
ROM date: 07/05/07
Radio version: 1.47.00.10 (Upgraded 7-11-07)
Protocol version: 32.80.7020.20H (Upgraded 7-11-07)
Windows Mobile 6 Professional
CD OS 5.2.1437 (Build 17944.0.3.1)
always install OS specific files in main memory.
I actually store all apps in main memory and just use the microsd for data
Voip
eva_d said:
I've installed these two cabs:
MajikVOIP.cab - http://www.4winmobile.com/forums/local_links.php?action=jump&id=24&catid=6
VOIP Drivers.cab from http://wmblack.info/addons/
And VoIP is working fine for me with official WM6 ROM.
Click to expand...
Click to collapse
Can you please tell us who is your voip provider?
Thanks
alishankiti said:
Can you please tell us who is your voip provider?
Thanks
Click to expand...
Click to collapse
I'm using it with Polish ipfon.pl, however AFAIR it also worked witch sipgate.co.uk.
Mine is Messagenet. Excellent service.
www.messagenet.it
Crackling
Hi,
I've loaded MajikVOIP.cab, VOIP Drivers.cab and SetupVoIP_v0.3 (all in main memory) and although VoIP works OK, I get the occasional, short bursts of crackling from the loudspeaker, even when it's not actually enabled.
Is this a Known 'feature'?
System specs in sig.
Thanks
linker3000 said:
Hi,
I've loaded MajikVOIP.cab, VOIP Drivers.cab and SetupVoIP_v0.3 (all in main memory) and although VoIP works OK, I get the occasional, short bursts of crackling from the loudspeaker, even when it's not actually enabled.
Is this a Known 'feature'?
Click to expand...
Click to collapse
I haven't noticed that, but to be honest - I also haven't used VoIP app for a while, so I could just miss it...
linker3000 said:
I've loaded MajikVOIP.cab, VOIP Drivers.cab and SetupVoIP_v0.3 (all in main memory) and although VoIP works OK, I get the occasional, short bursts of crackling from the loudspeaker, even when it's not actually enabled.
Click to expand...
Click to collapse
I just placed VoIP call, and you're right - there is that crackling sound coming out of external speaker from time to time. However, I don't have this when VoIP is disabled. :-o
Btw, do you have the same 'feature' that changing in-call volume with roller is not possible while VoIP call?
eva_d said:
I just placed VoIP call, and you're right - there is that crackling sound coming out of external speaker from time to time. However, I don't have this when VoIP is disabled. :-o
Btw, do you have the same 'feature' that changing in-call volume with roller is not possible while VoIP call?
Click to expand...
Click to collapse
Let me try....
Confirmed, I can't change volume with the roller too.
Im in the same problem, I Black Majik and I can't get VOIP to work. Please Can some one tell me the best combination to use. thx
My device is CINGULAR 8525, I updated the system to WM 6.1, kernel version is 5.2.19174. SKYPE 2.1/2.2 is unable to run under WM 6.1 right now, I installed SKYPE successfully, either CAB or EXE file. But after I tap the icon on TODAY screen, it jumps out.
SKYPE was running well under WM 5.0 and / or 6.0.
Who has experience to run it under WM6.1?
Thanks!
Sorry if I'm not much help, but it does work for me (under 3g Skype or any other program has never worked under WIFI for me)
I'm using the latest version and it's working fine for me.
http://www.skype.com/intl/en/download/skype/windowsmobile/
Skype is ok
Running ShadoW 2.1 and Skype 2.1.56 on HTC Hermes and everything is ok.
Hey Guys,
I've the same problem, but when I tried pay's rom 3.05, skype runs pretty well.
Maybe the problem is the kernel 19174.
And I could not run skype on some of kernel 19199.
Wondering pay more attention to WM6...
JR_de said:
I'm using the latest version and it's working fine for me.
http://www.skype.com/intl/en/download/skype/windowsmobile/
Click to expand...
Click to collapse
Thanks for your prompt,I did download that lastest version per your URL, same as before, SKYPE was jumped out without any message.
Anyway, thank you!
15812220 said:
Hey Guys,
I've the same problem, but when I tried pay's rom 3.05, skype runs pretty well.
Maybe the problem is the kernel 19174.
And I could not run skype on some of kernel 19199.
Wondering pay more attention to WM6...
Click to expand...
Click to collapse
Yes, probably I should be back to WM6.0, if it is a problem for WM6.1.
As I said, on Shadow 2.1 TE - WM 6.1 (build 19199) works Skype without problem and I have no problem also on other WM6.1 ROMs! If You have Hermes, use version, I have mentioned in my first post here, because other versions are NOT working on this type of device (it is caused by device, not OS).
MaRaHoX said:
(it is caused by device, not OS).
Click to expand...
Click to collapse
Processor is the problem. Hermes processor is build on arm9 architecture and Skype does not support it anynore (only messaging works). In other words you need a device with arm11 processor or the earlier version of Skype which supported arm9.
Cheers
Skype runs nicely on 3G and WiFi with Pay's WM6.1 v3.05.
mck062002 said:
Skype runs nicely on 3G and WiFi with Pay's WM6.1 v3.05.
Click to expand...
Click to collapse
The last version of Skype that supported arm9 processors was Skype 2.2Beta version
same problem :s
skype works fine on wm 6.0, but not run with the offical htc rom 6.1 :/
Skype Works!
Hi,
I can confirm that I have tried the current windows mobile version of Skype, available here, and it works well over WiFi with the two latest WM6.1 roms by Dvha79_ddt. The older betas I had been using did not work.
Regards,
I'm running the latest version of Skype (v. 2.2.0.37) on PDAviet WM6.1 (build 19900). It runs pretty fast. Faster than on any ROMs I have tried. Before I cannot use it as PPC to PC call but now its just like pc to pc call, with the absent of video though. I used it over WiFi.
mck062002 said:
I'm running the latest version of Skype (v. 2.2.0.37) on PDAviet WM6.1 (build 19900). It runs pretty fast. Faster than on any ROMs I have tried. Before I cannot use it as PPC to PC call but now its just like pc to pc call, with the absent of video though. I used it over WiFi.
Click to expand...
Click to collapse
works for me now also (build 19199).
I read somewhere on the net a while ago that Skype personel was working to get Skype work with arm9 architecture again, apparently they did it.
Cheers
hi.. i likethe icon of yours.. how to get the htc plugin like ur logo ?
Hello everybody, I put 3-4 newer roms on my tytn, and none of them functions good with skype.
when i put official 6.0 from htc everything is ok!
tried to solve it a2dptwaeker but it doesn't help.
skype is very important to mu. any idea?
Which version of Skype are you trying?
If I recall correctly, they broke Skype for the Hermes when they 'improved' it, and only one of the old beta versions would work.
Maybe you want to give Fring a try? Its much more lightwight than the Skype app.
I'm using the latest version and it's working fine with WM6.1:
http://www.skype.com/download/skype/windowsmobile/
I can confirm ... I'm running WM6.1 with the latest skype version very well.
Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy
look in this thread
http://forum.xda-developers.com/showthread.php?t=369269
Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks
I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.
WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy
As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.
All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?
How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.
...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks
Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.
I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.
tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.