How TO Upgrade to wm6 Official? - 8525, TyTN, MDA Vario II, JasJam ROM Development

First of all please be patient and dont get mad at me....
I know that there is a solution availaible by mrvanx so that it runs on all versions of hermes.
But i am unable to download from the sites he uploaded that rom.
And i downloaded the orginal dopod Rom (838Pro_SEA_ENG_WM6_Upgrade_20070712.zip).
I am currently using hard spl and after searching i came to know that i need to downgrade to retail spl fallowing this link
(http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27)
So after downgrading to retail spl, should i just run the .exe file or do i need to perform any additional steps?
Thx in advance.

PLEASE go to this thread: http://forum.xda-developers.com/showthread.php?t=316770
you do NOT need to downgrade the SPL version.

You beat me to it MrVanx.

Madcap180 said:
You beat me to it MrVanx.
Click to expand...
Click to collapse
Thats the main problem i cant download neither from megaupload nor from rapidshare.....
So any body?
Plus I need to upgrade radio to 1.47 ...iam currently running 1.41

That's downloadable//
from rapidshare I have downloaded Radio 1.47 and upgradeing tooks 20 minutes. Now works fine with not "G" (GPRS), instead with "E" (EDGE).
Another change you can see on screen- the connection mamager icon and battary status icon are off, disabled.

winforall_xda-developers said:
from rapidshare I have downloaded Radio 1.47 and upgradeing tooks 20 minutes. Now works fine with not "G" (GPRS), instead with "E" (EDGE).
Another change you can see on screen- the connection mamager icon and battary status icon are off, disabled.
Click to expand...
Click to collapse
I said that in my country i cant acces rapidshare as well as megaupload.

Related

gprs and o2 asia 1.40 rom

hi guys, i just updated to o2 asia 1.40 rom and just have a few questions,
1 . the gprs, i had to enter these details myself, but i know they are correct, but when i connect to gprs, i seem to have a counter now on t he gprs icon on top of screen, to me this looks like a wap / pay per minute thing, can anyone confirm they have this also and taht i have not done it wrong, also that it is just a counter to say how long i have bene connected to gprs.
also i thought the o2 asia rom would have had o2 active with it... anyone have this cab file is one available??
cheers guys!!!!
joey. 8)
Hi joey,
If you want the latest O2 Craptive CAB, from the latest UK ROM, it can be found here:
ftp://ftp.xda-developers.com/BlueAngel/Extended_ROM_Kitchen_1_3X/Customization_Operator/O2_UK/
Just download the cab file install.arm.cab
Why bother though?! It sucks!!!!
Let me know how you get on with the Asia ROM, I was thinking of switching, but my phone is pretty stable at the moment anyway on the imate ROM.
Cheers,
Fin
Sorry, just tried that link and it doesn't work. Go to wiki, click on BA< then Ext ROM kitchen, cooked ROMS, then click on O2 UK 1.31.139 then click on the cabs link.
thanks for that, i will test it on the 1.40 rom and see if it is ok, im also going to see over the next few days, whether asia rom 1.40 runs ok with the programs that i use,
anyone else know the gprs thingy???, cos i want to use it, but dont want to be charged per minute for internet use.

Radio update v1.09.00

Available:
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,258/
Can you bung this one there as well? I have no ftp access...
ftp://xda:[email protected]/Uploads/Universal/ROMs/uni_cdl_13068_130153_10900_wwe_test.exe
To Splather:
Download and install filezilla (free FTP client) http://www.sourceforge.net/projects/filezilla or download this ROM from: http://rapidshare.de/files/14582358/uni_cdl_13068_130153_10900_wwe_test.rar
or
http://rapidshare.de/files/15132821/JASJAR_WWE_13076_164_10900_wwe_ship.zip
or
http://rapidshare.de/users/3Z6SX/ (Passw: login)
8) :twisted:
LEGEND! Cheers. :twisted:
Can anyone tell me what is the diferent betwen 1.08 and 1.09? althought I had change to 1.09 but I havent recognize any changes with my Exec
Just greater call stability. Radio upgrades affect BT, calls, and WiFi. Sorry if I'm telling you how to suck eggs here..
radio doesn't affect BT nor wifi. Sorry for that, but I was told the same on previous upgrade
well i thought that radio helped your reception when making a call.Signal strength?
Sorry for being thick but I downloaded the radio_,nbf file what do I do with it now.
The last upgrade "1.08" I did was a nice easy one just plug in and clicked the exe file.
Cheers with any help
I installed teh update without any problem om my qtek9000.
Everything works fine. The first thing i noticed is that now i have an UMTS connction inside. Until now qtek switched back to GPRS mode inside my house. (but perhaps they just installed a new UMTS broadcasting point)
Azriaphale said:
The last upgrade "1.08" I did was a nice easy one just plug in and clicked the exe file.
Click to expand...
Click to collapse
Just Copy this file into the folder created by the EXE of the prevous version - But why not go for the whole ROM !!!!
There are so many Improvements !!!!!! :lol: :lol: :lol: :lol:
Azriaphale said:
The last upgrade "1.08" I did was a nice easy one just plug in and clicked the exe file.
Click to expand...
Click to collapse
Just Copy this file into the folder created by the EXE of the prevous version - But why not go for the whole ROM !!!!
There are so many Improvements !!!!!! :lol: :lol: :lol: :lol:
Skillie said:
Azriaphale said:
The last upgrade "1.08" I did was a nice easy one just plug in and clicked the exe file.
Click to expand...
Click to collapse
Just Copy this file into the folder created by the EXE of the prevous version - But why not go for the whole ROM !!!!
There are so many Improvements !!!!!! :lol: :lol: :lol: :lol:
Click to expand...
Click to collapse
Skillie, thanks for the recomendation on going for the whole ROM. I apologize in advance for perhaps this being a basic question, but could you explain this answer just a bit more? What version of ROM are you referring to? Where is it avail? etc... You mention improvements, I'm interested...
Also, like the other post, I am confused by what to do now that I have the 1.09 file. Unlike the other post, I did not have a 1.08 exe, so I have nothing to re-execute.
My thanks to anyone who can break this down just a little more for us.
I placed the file in the folder of my exe, but I get an Error 120 message...
The 1.06 Radio was great with no errors... I tried reseting and executing the exe again, but I still get the Error Wrong Country Code. Now what?
updated and testing.......thanks
Skillie said:
Azriaphale said:
The last upgrade "1.08" I did was a nice easy one just plug in and clicked the exe file.
Click to expand...
Click to collapse
Just Copy this file into the folder created by the EXE of the prevous version - But why not go for the whole ROM !!!!
There are so many Improvements !!!!!! :lol: :lol: :lol: :lol:
Click to expand...
Click to collapse
Since there are soo many improvements.Please do explain what kind of improvements are made.I saw on this page a few posts up that the UMTS connection is being used as an access point now.Is that in the United States as well??
FWIW - 1.09 seems to have the best sensitivity of the Radio Roms I've tried (O2 standard, 1.06, and 1.08) since it's revealed that I have 3G in my area that has never shown up before...
Cheers,
Steve.
StevePritchard said:
FWIW - 1.09 seems to have the best sensitivity of the Radio Roms I've tried...
Click to expand...
Click to collapse
Using radio ver 1.06 as a base line, ver 1.08 drained quickly. Ver 1.09 seems to have returned my battery life back to or better than what I could get out of ver 1.06.
I agree that sensitivity appears better, too.
I agree, radio version 1.09.00 works better than radio version 1.06.00 as far as reception is concerned. So far I am happy with it. Still have to observe more though. I only had it for a day.
Where/how do I do this?
OK - just got the MDA and want to do this update. I have done pror to this with the Radio - so how or where do I put this to complete the upgrade/update.
Any help is appreciated!

[WM6 DOWNLOAD] REPACKAGED DOPOD WM6 3.54.707.3 Official. Works on ALL Hermes Devices

Since all you users seem to be posting useless topics about an RUU which wont work on the majority of Devices, heres one that DOES.
So you guys know this is the DOPOD release so it is taylored for a dopod 838 pro....your network settings will need to be added manually.
The standard RUU from dopod will not work if you have updated to HardSPL since it does not detect the SPL version as valid.
Please first Update to HardSPL (SPL 2.10.olipro) first as your device is at risk of bricking.
See how to do this update here.........then proceed to download and flash the WM6 ROM.
WM6 Dopod WWE 3.54.707.3
Repackaged with CustomRUU 4.3
This will flash to ANY Hermes device, select 'Autodetect' and off you go
Radio, IPL, SPL removed.
Rapidshare Link
MegaDownload Link
Thanks a lot
Thanks a lot sir.
Thx ! I'll try it !
OS version ?
Now i've got 5.2.1238 build 17913.0.3.0
Thanks!! downloading now ..
Thanks alot i wll try this once its down, Thanks Again
Many thanks.
Well in, as usual.
...
Thanks so much ....
It was like waiting in line for Star Wars ....
BlackBerry Connect
Anyone tried it yet with BlackBerry Connect?
Thanks a bunch
Downloading now.
I was experiencing some problems with the previously published version.
Cheers.
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
yak86 said:
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
Click to expand...
Click to collapse
Use whichever radio ROM you wish. The most current two radio versions released are 1.46.00.11 and 1.47.00.10.
NOTE: DO NOT flash without safeguarding against a brick with HardSPL.
WHat will have i to do when Dangaard will release the italian version of WM6?
Actually i flashed in my HErmes the Shnap's 3.30c pro WWE rom, and to do it i followed the Mrvanx guide to upgrade to HArdsppl 7 (olipro 2.10).
Have i to downgrade it or what?
thankyou
Hi All
Just wondering if anyone had a fix for the:
"Your current operator (23410) is not supported......"
I appreciate that you can just dismiss or "Don't show message again..."
I have installed the O2 Cab.
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
guyver2077 said:
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
Click to expand...
Click to collapse
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
AlbertoM said:
Anyone tried it yet with BlackBerry Connect?
Click to expand...
Click to collapse
Did not work with BB connecct (using version 4) on Fido in Canada (i.e BIS)
- PIN OK, No connection
- No service list
Alternative download site please...
Thanks in advance.
this ROM has 27MB RAM, instead of 21MB...
Volpus said:
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
Click to expand...
Click to collapse
haha thanks.. much easier now... i was having a tough time with the ok button on the base...
Here is what my phone shows up:
IPL-1.01
HERM100
SPL-1.06

Gps Device Not Working After Flashing

i flashed my HTC TRINITY P3600 with trinity update guide (TRIN_RADIO_1.38.00.11_Only_SSPL or 1.40 probably) and installed windows mobile 6.0 on my device. When i installed tomtom 6.03, it says no GPS device!. Guys help me how can i restore it?
usman3206 said:
i flashed my HTC TRINITY P3600 with trinity update guide (TRIN_RADIO_1.38.00.11_Only_SSPL or 1.40 probably) and installed windows mobile 6.0 on my device. When i installed tomtom 6.03, it says no GPS device!. Guys help me how can i restore it?
Click to expand...
Click to collapse
OK - which RADIO do you have? - this is not clear.
You should try - Hard reset - install tomtom6.03 start up tomtom - sometimes for say 30s tomtom can say no GPS device - before the message changes to waiting for a valid GPS signal. Be patient.
Also search for "no GPS Trinity" here: http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
you should find others with the same experience as you!
Good luck.
hi,
i have read in this forum, that any Radio ROM ending in 1 have GPS enable, so you must wait a litle time (1-2minutes) before your GPS program fix the GPS signal.
i installed it with trinity info guide and used this radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion 1.46.00.11 GPS available on this forum? Pl help. sorry for double post, i was really confused where to put it and was really desperate for my GPS. i will be careful next time. thanks for your reply. i am trying other options
usman3206 said:
i installed it with trinity info guide and used this radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion 1.46.00.11 GPS available on this forum? Pl help. sorry for double post, i was really confused where to put it and was really desperate for my GPS. i will be careful next time. thanks for your reply. i am trying other options
Click to expand...
Click to collapse
hey! We have exactly same problem! the radio also show 1.16.00.00 on mine!
Upgrade your radio then it should work! had a friend who had also a very old version. He got's it fixed with upgrade!
i have already replied you in the other thread where you posted this issue.. there's no need to double post this. I've posted the link to hard-spl 1.20
you need to use hard-spl 1.20 olipro to install your radio, 1.30 has resulted in radios not being flashed even though you follow all the steps.. there is a note about this in the guide if you read it carefully.
Flashed With Olipro 1.20
RACERX i have flashed it with olipro 1.20 but still it shows no GPS device? even after 20 minutes of keeping tomtom on. should i upgrade rom to 1.40 GPS, i saw one on this forum. although i have downloaded it but it ROM update utility shows pretty strange words on its menu!!! what next
what radio do you currently have
The problem is clearly that you radio ROM is not up to date - and that it why you don't have GPS.
hi buddy! I got it solved!!! Yes it's the problem of the radio, and seems that if your hard SPL version is 1.30, you are not able to flash the radio. everytime it seemed works but after flash the radio just remain the same.
read this thread,http://forum.xda-developers.com/showthread.php?p=1483529#post1483529
there is a radio ROM with hard SPL which flashs the hard SPL first then the radio. I succesfully found the device and got GPS working yesterday!
racerx_ said:
you need to use hard-spl 1.20 olipro to install your radio, 1.30 has resulted in radios not being flashed even though you follow all the steps.. there is a note about this in the guide if you read it carefully.
Click to expand...
Click to collapse
ummmm... yeah.. isn't that what i just said? does anybody read on this forum?
racerx_ said:
ummmm... yeah.. isn't that what i just said? does anybody read on this forum?
Click to expand...
Click to collapse
No - reading is out of the question. What you have to do (especially if you are new) is just create a new thread - or if not post the same question in as many threads as you can find that are half relevant.
(This of course is cynical sarcasm. Please - do not do the above. I implore you all to READ - as you will find the answers. Also - when you find an answer to your question - try thanking the person who brought you the answer - instead of pretending that you found something new out)
Probably radio version 1.46.00.11
i flashed using trinity info guide and used radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion "1.46.00.11 GPS" (but RUU shows strange wording on the menu when i launched it but didn't install it cause i wanted a go from u) available on this forum?
my goodness... it says on the bottom of the guide in BRIGHT RED FONT "If you have followed these steps, but your radio has not been upgraded, please install Olipro's Hard-SPL version 1.20 found here using SSPL (do not enter bootloader manually) and try to flash your radio again. After doing so, it is recommended that you flash Hard-SPL 1.30 again."
i've now posted this info in the million noob threads as well... seriously ppl..
Thank You Very Much
RACERX you are the MAN, you really are an expert. Now my GPS device is working but searching for the signals as i am in Pakistan these days. Know of any south asian (pakistan or saudi arabia) maps available.
Besides tomtom, which one is the best GPS navigator? And if possible can u tell me where i can find information regarding using my laptops net connection for my PDA? i am an old user of computers (since 1991) but a newbee in the world of pocket pc, and its because of you that i could change completely my SFR s300+ into an english windows mobile 6. I will donate something for you man. I read many threads carefully but was wondering around untill you pulled me outg of this trouble.
Again THANK YOU VERY MUCH
glad it helped.. i'm not familiar with which map programs support pakistan. I use MapKing for Singapore where i am, and love it ... i don't see a pakistan map, but you can check http://www.mapking.com/en/MK10/MK10_Dowload_Eng.htm#Malaysia Tom Tom seems to be quite popular, but again i don't know what countries it supports. Maybe you could try garmin or something? I know that they at least support thailand and such.
about your net connection, you basically want to use your trinity as a bluetooth modem? I've never done it, actually, but i think there are some threads on it if you search around. sorry i can't be more help. let me know if you get stuck
Thanks Again
I really appreciate for your timely and valuable response.

Radio testing

Here is the promised radio.
http://rapidshare.com/files/130166402/RUU_signed.zip.html
I don't think it is the best radio... but some ppl want to try it, bc of the GPS problems.
Radio is not signed and please posts your results
testing....
what radio do you mean? version?
version 1.02.25.11
Can´t flash it ;-(
jkb770 said:
Can´t flash it ;-(
Click to expand...
Click to collapse
it is unsigned, you would need the developer Hard SPL for that
Hmm it´s on... in V 1.40
or did I get something totally wrong?
Or d´y mean the 2.60?
Flashed.
I have tested GPS fix just after flashing Panosha light 4 Rom. First fix in 9 seconds,with IGO8 (very good),second and third fixes instantly. Now I will test 2G and 3G signal in some "bad zone"
Cheers bepe, will check it out. I've not been impressed so far with any of the updates. What are you using in Germany?
I gona try to test it on 0.53!
Woooowwwww
Better signal in hsdpa, for sure and for the first time
11 satellites with tomtom 7 in five seconds....., man it rocks
woooowwwwww
forgot one thing: rom project diamond V2; and i'm testing at this time again; there is a big progress in terms of reception quality, here in france with sfr 3G+
Energy feedback ?
Please guys,
Don't forget to talk about energy consumption with this radio.
Thanks.
..me too stupid
Grrr
Today it´s not my day...
Gimme a hint...
Unsigned Olinex HardSPL 1.40
Custom RUU
When Flashing i get a "wrong device ID" error after 5% (Invalid MODEL ID)
(the RUU says that the Radio Image is V 0.0.0.0)
Any Clues?
about energy consumption, this is too early to say anything.....
Correct me if I am wrong, but GPS has nothing to do with Radio rom?
Riel said:
Correct me if I am wrong, but GPS has nothing to do with Radio rom?
Click to expand...
Click to collapse
Hello Riel,
Are you sure ?
The GPS uses a communication protocol, right ?
What does the radio ROM on our PDA Phone ?
It all runs on a single Chip inside our Diamonds ;-)
jkb770 said:
Grrr
Today it´s not my day...
Gimme a hint...
Unsigned Olinex HardSPL 1.40
Custom RUU
When Flashing i get a "wrong device ID" error after 5% (Invalid MODEL ID)
(the RUU says that the Radio Image is V 0.0.0.0)
Any Clues?
Click to expand...
Click to collapse
How did you start the RUU? Try it from bootloader menu.
1, Bootloader
2, Start ruu.
So, I give you my feedback :
This ROM Radio give me only an EDGE connection.
Where I am, usualy I get a poor reception of 3G signal with .03 an .05 ROM.
But, with the .02.25.11 I've got no 3G signal.
No difference for me with the GPS fix.
For the moment, I'll back to the .05 one.

Categories

Resources