I was upgrading my Trinity to new Mobile 6 but halfway through the load, everything stopped. I didn't disconnect anything, nor did I run out of power. Now I have:
TRIN100:
IPL-0.50
TRIN100:
SPL-3.03.0000
But when I run any original firmware loads, it says "cannot upload due to corrupt image" or "Invalid Vendor ID". I can't boot into a functioning OS anymore, it stops at the Direct Mail screen. I can get into boot loader, but I cannot seem to load any image into the device.
Can anyone help?
I got the same issue and now stucked on the 4 color bar.
Use splxploit to load HardSPL while it's in bootloader mode, then without resetting your device flash any Trinity WM5 rom to unbrick it:
http://forum.xda-developers.com/showthread.php?t=308691
Seriously, people do NOT know how to read. This has been ALL over these forums. But it's the people with 1-9 posts, who don't know what they're doing, asking a million questions, and opening a new thread each time; instead of using the already open threads. THIS is why newbs do NOT deserve to flash their device.
Pof, do you think we could have a simple sticky.. at least for a couple weeks regarding this issue? cause i think it's just going to keep getting posted
Got it to work. Thanks. Sorry about the extra post. I didn't see the "Windows" version of the splxploit. Much easier in windows!!
Related
I know there's a lot of forums for this topic! i have tried following the procedure given at most of the forums but to no help. The upgrades just don't happen as the connection error 101 keeps popping up after executing the rom upgrade exe. I don't know how to use the mtty.exe and host.exe to fix the problem. I'm using vista ultimate on my desktop and wm6 rom (jwright 2.02.00) on the jasjar. before i got stuck in the bootloader mode, i remember getting the KITL option on the blue imate boot screen and enabling it. I'm stuck in the bootloader since then. I appreciate this forum and the people here...need your help. Thanks in advance.
Got it Resurrected
crooner999 said:
I know there's a lot of forums for this topic! i have tried following the procedure given at most of the forums but to no help. The upgrades just don't happen as the connection error 101 keeps popping up after executing the rom upgrade exe. I don't know how to use the mtty.exe and host.exe to fix the problem. I'm using vista ultimate on my desktop and wm6 rom (jwright 2.02.00) on the jasjar. before i got stuck in the bootloader mode, i remember getting the KITL option on the blue imate boot screen and enabling it. I'm stuck in the bootloader since then. I appreciate this forum and the people here...need your help. Thanks in advance.
Click to expand...
Click to collapse
Hi people...here's an update on how I came out of my crisis..(for a moment i thought there's some defect caused on the mainboard!) anyways, i went to a lot of threads pertaining to the 'stuck in bootloader topic' and mixed and matched the solutions. here's what i did.
unsuccessful efforts :
used the combination keys with reset to come out of the bootloader in vain.
tried hard-reseting the device in vain.
tried weird key combos in vain.
tried to upgrade rom (on vista ultimate) got connection error 101.
tried to reflash radio rom but got the error even though device was listed in the device manager
------------------------------------------------------------------------
Successful Effort:
Just when i thought that i'd have to bring my baby to the service center...i said a prayer to Jesus asking Him to fix it for me. Really got desperate and prayed...I got a check from Him to try using another computer with XP which i did but the Rom wouldn't flash. Still stuck on the bootscreen, I tried the radio upgrade on the computer running XP SP2 with the maupgrade noid stuff and there it was, upgrading the radio rom! I thanked the Lord for helping me for XDA Developers forum and I'm a happy Jasjar user once again. I hope you will get some help from my testimonial which is why I'm posting this!
I am trying to upgrade to Schap's new ROM on WM6. Once I have the phone sync'd, I open the ROM update utility and go through the beginning steps. I get to the "You are now ready to update your ROM image..." section and click next. The phone immediately disconnects from the computer and the screen turns off. The ROM update has failed at the point. Help!
Does your phone go into a tri-color screen?
You might want to delete your AS 4.5 settings on your desktop and then install clean from there.
Also, if you have Hard SPL on your handheld (which I HIGHLY recommend) then you could also go to the tri-color screen (hold the "ok" and "power" button together and reset), and the flash from there, using "force safe SPL"...I've had to do that a few times when I lost AS connectivity.
Hope that helps.
And I do NOT take responsibility if none of that works
Jim
OK I was able to get the tri-color screen up by holding those three buttons at the same time and the upgrade started, then failed with a message saying "The image file is corrupted." I downloaded the image file again and it is still giving me the same error. What does that mean?????
Do you have Hard SPL on your handheld??? My first post said you should have loaded that FIRST.
Jim
How do I know if I have SPL?
Can anybody help me? Thanks!
okeven said:
How do I know if I have SPL?
Click to expand...
Click to collapse
Hard SPL, not just SPL.
and if you dont know what that is, then i suggest you spend a little more time reading before you start flashing
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
OK all the info required to do the upgrades and etc... is available readily in the wiki pages aswell as via the updated search function.
Please make sure you are up to speed on all the info BEFORE doing any upgrading on your device.
Heres some good reading:
HTC Hermes Wiki
Hermes WM6 Upgrade Guide
Upgrading hermes ROM search results
Hi, hoping someone can help.
Getting the following. Can't get past it. Also what does the Diam100 stand for as I notice others have different.
A tri-colored screen that reads as follows:
Diam100 64M
SPL-1.37.0000
MicroP-Diam (LED) v.11
-----------------------
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
Thanks for you help!
1: state the subject in the thread title, that's what it's for
2: search is your best friend; the issue you mention has been discussed in several threads
3: I'd recommend: get into bootloader mode (seems like you can); install hardSPL again, flash again with any ROM supported by hardspl.
4: insert [solved] in front of your thread title.
5: this is NOT a relevant subject for this forum (it's got nothing to do with rom development)
apologies, im new to this (only got the diamond today) and havent been able to use it yet and this forum was the closest thing i could find to getting it working.
Im unable to enter bootloader mode (volume down, reset?)
Also can't get my diamond to connect to pc and keep getting connection errors when trying to install Hard-SPL?
Thanks, your help is appreciated.
The tricolor screen IS bootloader mode.
Just run the HardSPL, then Rom upgrade utility from a rom, and that's it.
IF you got it in this state, you'd probably want to return it (you got warranty?)
Thanks for your help.
Is HardSPL going to install even though ActiveSync isn't recognising the device (ie not connected). When i run it it seems to work and then a grey screen with 0% shows. Then the install program comes back with a 'connection problem' message,i go through all the steps but just keeps happening. I read posts on this earlier today but it seems the install program is fixed and shouldnt do it any more????
...also ive done all the firewall changes to make sure it connects etc etc. Forgive me if im not doing something that has been posted already, but i couldnt find it.
Thanks.
I had the same problem make sure you install the HARD SPL but the unsigned version not the sign version.....it should work them.....
i think there's two issues people are describing here..
1) installing hard spl.. if you get the 0% error, then you need to follow the instructions in the thread and manually run SSPL from your phone and then start the RUU
2) if you keep getting errors while trying to install your rom AFTER installing hard-spl, then you probably are flashing an unsigned ROM on the signed hard-spl.. go to the sticky thread and download a signed version of the ROM you want..
Thanks guys. I dont see how i can do the manual install, as it requires me to copy a file onto the diamond and at this stage i cant even get activesync to connect to it. I dont beleive its a problem with activesync or the pc as ive tried many many things, but rather that the diamond isnt communicating properly.
Also i havent even got to installing the new ROM yet as i cant get past HARDSPL install.
Do you think installing the un-signed HARDSPL version will work? as in will it install when the signed version won't?
all your help is very much appreciated. I cant wait to actually turn my phone on for the first time!
you haven't turned it on yet
is that right?
you have not had it working yet?
or have you tried to update it even before using the phone???????
yeh unfortunatley thats right, yet to turn it on. hopefully will have it up and running shortly...
1) can you confirm exactly what happened to get you stuck in the bootloader screen? (it usually doesn't just happen by itself)
2) Have you tried to soft reset to get your device out of bootloader?
3) are you flashing in win xp or vista?
4) are you connected through a usb hub?
yes, tried soft rest but it just returns to bootloader screen.
using winXP SP3. Not using a USB hub. have tried different ports.
Have tried the signed and unsigned versions of HardSPL.
I keep getting to the 0% grey screen and then the communication error 262.
Maybe i should try and just flash the original ROM? Does anyone know where I can download it from and the HTC e-club doesnt have it? Or is this not the next step???
Thanks!
yeah try the original ROM..
but still i don't understand how you got to this point.. what were you trying to flash when it got stuck in bootloader?
I bought the phone like this.
Do you know where i can get the original ROM from? I tried e-club (both worldwide and SEA) no luck.
Appreciate your help on this.
?? that's quite strange... is there any reason why you're not just returning it for a new set?
try this thread for SEA ROM
I bought it whilst overseas last week in SEA. Im now back in australia and would like to try my best to fix it before going down the long and difficult warranty path.
Do you think its buggered? Or the fact that its in the bootloader screen and giving me this message quite common on failed ROM updates?
Do you think an orginal ROM install will fix it? if so where can i get it from?
Thank you.
well that's what i'm asking..
you got this screen when you pulled it out of the box, or tried to update the ROM and then hung on this screen. also, if you did try an update, was it a SEA update, or australian ROM
i wouldn't say its a common issue.. i also don't think your device is bricked, since its showing bootloader.. diamond is relatively new so i don't really know a lot about getting it out of this state.
trying to load original ROM is a good option.. one thing is for sure, before any further flashes (after you get out of this mess) you want hard-spl on your device.
If flashing original ROM doesn't work, i'd suggest PM'ing walshieau, olipro, or pof as they know a lot more about this type of stuff.. do post your results
Thanks for the link above. i'll give it a go. is it different from the one in the ROM list??
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.
Hello xda community,
I have a serious problem, as per title, with my beloved Z00D device.
I unlocked the bootloader and struggled for over three hours to let it get TWRP Recovery.
Once finally done, I moved on to flash the RussianBear CFW.
Sadly, at the end of the installation, it gave an error I had no time to write down (E: unable to mount, is what i can remember).
Since then it is stuck on the Intel Inside logo an reboots every few minutes just to go back to the same logo.
Holding volume up while powering won't open the bootloader, giving a usb logo instead.
Holding volume down render absolutely nothing.
I tried to follow an umbricking guide already that uses xFSTK. This program doesn't even start when prompted. So I'm officially stuck and with no cellphone. Abroad. Alone.
Help?
silly question did you open app as administrator?
You can do it as you are on the right road, just search and look for CHuvaCK21 advice and raw firmware.
Start here: hxxp://4pda.ru/forum/index.php?showtopic=657946&st=1160#entry46287238
In the end please make a tutorial for others as it could be useful some day ...
relu666 said:
You can do it as you are on the right road, just search and look for CHuvaCK21 advice and raw firmware.
Start here: hxxp://4pda.ru/forum/index.php?showtopic=657946&st=1160#entry46287238
In the end please make a tutorial for others as it could be useful some day ...
Click to expand...
Click to collapse
I'm afraid two main issues will pop up.
First of all, I can't access the device's bootloader to push a stock recovery in it.
The second is a simple and plain problem: I can't understand russian nor russian alphabet.
I moved on to flash the RussianBear CFW. :P[/QUOTE said:
Too late to speak about Russian alphabet and being afraid now
Use your common sense, google translate and go on as nobody can do it in your place.
Click to expand...
Click to collapse
Same problem man, what did you do? please help me