Related
EDIT: I found info that claims these updates can't be installed on Vista, and I'm running Vista. I will try again on an XP machine. Can someone confirm/discredit this? Thanks.
Hi all,
I have an iPaq hx2410 and whenever I try flashing ANY ROM (even official HP ROMs that I downloaded from their site), all seems to go well at first, but then my progress bar goes to 0.1%, the unit resets to BL mode with the "USB" on the screen and nothing happens. It never advances past 0.1% and after a minute or two, the Flasher quits with the error about "RUUClientDriver.dll" I've tried all sorts of things, from switching USB ports to resets but nothing... I'll try it on another computer today, but does anyone have any suggestions? I can't even update to the latest wm2003SE ROM, let alone WM5 or 6 because of this problem! Yes, I searched the forum(s) already. Thanks a lot!
-Morris
im getting upset over a hx210 one minute it says bad activesync, then wrong ruuclientdriver.dll file, the ruu software says for the pre-bl mode, the handset says no turned on normally, and yet, no answer from anyone about this,i hope this is the right place.
Hi,
i've same problem !
Hi, i have just bought a new imate jasjam and uploaded the windows mobile 6 as per your instructions. Everything was going ok, then active sync kept stuffing up, i reinstalled it 3 times and only sometimes works, i have limited to no connectivity in my LAN, and my imate takes 2hrs to do anything once i touch the screen. i have tried hard resetting etc nothing! i have searched and searched for everything and found nothing, i eally hope someone can help me, i am at my wits end!
PLEASE HELPPPPPPPPPPPPPPP
Try putting it into bootloader and flashing hard spl and flash a new rom after that.
thank you!
i just tried to do that and it said error please connect the usb to the phone etc..and it is..
if this helps anyone- ipl 1.04 and spl.2.10.0lipro?
ggrrrr
Can you tell us what ROM you are trying to flash, and what OS you are using to connect with?
ROM VERSION: 3.30.2.1
ROM DATE: 05/15/07
RADIO:1.38.30.10
PROTOCOL:32.71.7020.12H
I have a windows xp sp2
i am so grateful to everyones input. thanks
usb connectivityy
Goto to the usb settings under communication and remove the tick from advanced usb fuctionality. Maybe unplug from USB first before doing that.
Thanks, have just tried that but it didnt work, still got the red cross on the icon and limited to no connectivity thru the LAN. i am so lost, i should have just left the phone as is ;-(
have you tried loading into the bootloader and then connecting the jasjam to your pc?
How to get into the bootloader is described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
once connected just run the offical update from telstra (which is a damn good rom btw) and it should return your jasjam to normal. The latest Offical update can be found here - http://forum.xda-developers.com/showthread.php?t=348436&highlight=telstra
hope that helps
edit; should have read first post. hmmm. try uninstalling activesync and reinstalling it, or try on another computer. i had this problem awhile ago, can't remember exactly how i fixed it, but it was a combination of new activesync, bootloader and hardresetting
ok, i have reset it- is the bootloader screen the one with 3 colours with ipl etc on it?
i connected it and it then said usb on the screen, but activesync can't connect it?
When you get to the bootloader screen with the 3 colors you need to reflash with a new ROM
thanks to everyone, i am now back and running! god knows hoe but thanks!
I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!
this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..
i tried all of that but not working
What error is it ?
i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader
Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.
hey, are you usin' Windows Vista
no XP SP2 , but as i told you i think i installed rom not for universal
also my screen is dead nothing at all only black no serial or usb on the screen
aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..
thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..
ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom
every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?
Oops! I omitted the quote
aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.
i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.
Hi all
I have just recently bought an 8125 unlocked and for T-Mobile use, but now I'm starting to have issues. My phone suddenly turned off 3 days later, and now it won't start up past the loader screen. I've been looking through every forum I could, and have concluded I must have a bad ROM or something..
Now, I've downloaded an RUU and was told I could use that to reset my ROM, but when I'm in bootloader mode, my computer won't detect it. It says that it's downloading drivers, but it's "device unknown." Some have said to reinstall activesync, but I'm on Vista, so I already have Windows Mobile Center. I know that I need to run an RUU, but if my computer can't recognize my phone, then I'm stuck because the program won't run.
Please, does anyone know what's going on and could help me? My search results have me even more confused. If it helps, i have a G3 (i'm not sure what that means)
Thanks!
weellll Cee
Your problem is well documented ...
RUU on Vista: It can be done... the ultimate guide! - MoDaCo
http://www.modaco.com/content/Windo...U-on-Vista-It-can-be-done-the-ultimate-guide/
Hope it helps ...
THANK YOU!! Oh gosh, I feel like such a noob. I didn't know that this was such a documented problem.
THANKS AGAIN!!
Hi, hoping someone can help.
Getting the following. Can't get past it. Also what does the Diam100 stand for as I notice others have different.
A tri-colored screen that reads as follows:
Diam100 64M
SPL-1.37.0000
MicroP-Diam (LED) v.11
-----------------------
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
Thanks for you help!
1: state the subject in the thread title, that's what it's for
2: search is your best friend; the issue you mention has been discussed in several threads
3: I'd recommend: get into bootloader mode (seems like you can); install hardSPL again, flash again with any ROM supported by hardspl.
4: insert [solved] in front of your thread title.
5: this is NOT a relevant subject for this forum (it's got nothing to do with rom development)
apologies, im new to this (only got the diamond today) and havent been able to use it yet and this forum was the closest thing i could find to getting it working.
Im unable to enter bootloader mode (volume down, reset?)
Also can't get my diamond to connect to pc and keep getting connection errors when trying to install Hard-SPL?
Thanks, your help is appreciated.
The tricolor screen IS bootloader mode.
Just run the HardSPL, then Rom upgrade utility from a rom, and that's it.
IF you got it in this state, you'd probably want to return it (you got warranty?)
Thanks for your help.
Is HardSPL going to install even though ActiveSync isn't recognising the device (ie not connected). When i run it it seems to work and then a grey screen with 0% shows. Then the install program comes back with a 'connection problem' message,i go through all the steps but just keeps happening. I read posts on this earlier today but it seems the install program is fixed and shouldnt do it any more????
...also ive done all the firewall changes to make sure it connects etc etc. Forgive me if im not doing something that has been posted already, but i couldnt find it.
Thanks.
I had the same problem make sure you install the HARD SPL but the unsigned version not the sign version.....it should work them.....
i think there's two issues people are describing here..
1) installing hard spl.. if you get the 0% error, then you need to follow the instructions in the thread and manually run SSPL from your phone and then start the RUU
2) if you keep getting errors while trying to install your rom AFTER installing hard-spl, then you probably are flashing an unsigned ROM on the signed hard-spl.. go to the sticky thread and download a signed version of the ROM you want..
Thanks guys. I dont see how i can do the manual install, as it requires me to copy a file onto the diamond and at this stage i cant even get activesync to connect to it. I dont beleive its a problem with activesync or the pc as ive tried many many things, but rather that the diamond isnt communicating properly.
Also i havent even got to installing the new ROM yet as i cant get past HARDSPL install.
Do you think installing the un-signed HARDSPL version will work? as in will it install when the signed version won't?
all your help is very much appreciated. I cant wait to actually turn my phone on for the first time!
you haven't turned it on yet
is that right?
you have not had it working yet?
or have you tried to update it even before using the phone???????
yeh unfortunatley thats right, yet to turn it on. hopefully will have it up and running shortly...
1) can you confirm exactly what happened to get you stuck in the bootloader screen? (it usually doesn't just happen by itself)
2) Have you tried to soft reset to get your device out of bootloader?
3) are you flashing in win xp or vista?
4) are you connected through a usb hub?
yes, tried soft rest but it just returns to bootloader screen.
using winXP SP3. Not using a USB hub. have tried different ports.
Have tried the signed and unsigned versions of HardSPL.
I keep getting to the 0% grey screen and then the communication error 262.
Maybe i should try and just flash the original ROM? Does anyone know where I can download it from and the HTC e-club doesnt have it? Or is this not the next step???
Thanks!
yeah try the original ROM..
but still i don't understand how you got to this point.. what were you trying to flash when it got stuck in bootloader?
I bought the phone like this.
Do you know where i can get the original ROM from? I tried e-club (both worldwide and SEA) no luck.
Appreciate your help on this.
?? that's quite strange... is there any reason why you're not just returning it for a new set?
try this thread for SEA ROM
I bought it whilst overseas last week in SEA. Im now back in australia and would like to try my best to fix it before going down the long and difficult warranty path.
Do you think its buggered? Or the fact that its in the bootloader screen and giving me this message quite common on failed ROM updates?
Do you think an orginal ROM install will fix it? if so where can i get it from?
Thank you.
well that's what i'm asking..
you got this screen when you pulled it out of the box, or tried to update the ROM and then hung on this screen. also, if you did try an update, was it a SEA update, or australian ROM
i wouldn't say its a common issue.. i also don't think your device is bricked, since its showing bootloader.. diamond is relatively new so i don't really know a lot about getting it out of this state.
trying to load original ROM is a good option.. one thing is for sure, before any further flashes (after you get out of this mess) you want hard-spl on your device.
If flashing original ROM doesn't work, i'd suggest PM'ing walshieau, olipro, or pof as they know a lot more about this type of stuff.. do post your results
Thanks for the link above. i'll give it a go. is it different from the one in the ROM list??