Hi,
Just updated my phone with the new Aus wm6 image, however the 3 Aust customisation didn't auto install as last time I upgraded a rom.
Can anyone tell me what files I should run in the Ext rom to get it going? Or is this the issue that was vaguley mentioned about this rom?
THanks
http://forum.xda-developers.com/showthread.php?t=303046
fantastic. Thanks!!
It didn't appear to do anything. However I added all the basic settings myself.
Does anyone know what files to point the HTC homeplug to, in order to have the shortcuts that were there before?
Or a cab that will do it?
Cheers
to solve this we need someone with the official AUS WM6 rom on to unhide the extended rom and post the files in there to rapidshare or something like that......
ANYONE? please?
MontAlbert said:
to solve this we need someone with the official AUS WM6 rom on to unhide the extended rom and post the files in there to rapidshare or something like that......
ANYONE? please?
Click to expand...
Click to collapse
I can try doing it if it won't root my phone. So - detailed instructions would be appreciated
here is the mount Ext ROM file- install the cab on your phone and then you will be able to see the extended rom and the files in it in your file explorer....... then just copy and paste onto your desktop........ zip all files together and post or on rapid share or similar.....or post each file singly in a post for each file......
thanks
Can someone please extract the extended ROM from the Aust. WM6 version and post to rapidshare or somewhere please?
Thanks
Scott
3 And WM6 FILES
Hi have made a zip of ext rom as requested but can not upload here tried 3 times each time it failed never up loaded to raipid share before anyhelp welcome
file size is 4420 KB in zip
http://rapidshare.com/files/42810348/Extended_ROM.zip.html
Have HARD and SOFT reset a couple of time and all of a sudden it has run the 3 setup stuff ie now can connect and have the 3 plug in ie ebay and orb just thought i would keep people up to date
Here is another link to the D810 ANZ WM6 Extended_ROM:
http://www.megaupload.com/?d=J2TAPKM8
Hi Guys, I'm a bit confused. I thought I d/loaded the ANZ WM6 ROM from rapidshare. But there was no 3 setting or speicifc icons. Is that what people are experiencing here as well?
whats confusing me is the fact MontAlbert is asking someone with ANZ WM6 to share the extrom.... Or did I grab the wrong ROM? I'm pretty sure its right because its got the 1.46.30.11 radio.
so... should I grab the EXTENDED ROM from the link above and try again?
dualay said:
Have HARD and SOFT reset a couple of time and all of a sudden it has run the 3 setup stuff ie now can connect and have the 3 plug in ie ebay and orb just thought i would keep people up to date
Click to expand...
Click to collapse
Interesting!!! maybe the extended ROM needs to be unhidden before it will work!! why is that? Cool though... anyone else from oz tried this?
how do you hard and soft reset?
geez that sound like a real stupid question but I just cant work out what is what
Hard Reset And Soft Reset
Soft Reset Stylus in hole in bottom
Hard Reset Need to be a monkey press the right and left softkeys at the same time stylus in the softreset hole and then follow instruction on screen
Ok.
After messing around a bit, I found that the 3 stuff is still in the extended rom, just doesn't auto run. So I ran all the cabs in there and after a reboot, there were my shortcuts etc.
The only one I can see registered in the remove programs is one called "my connect" so this might be the one to solve everyones problem.
I did the same thing earlier today and can confirm that the 3 settings all seems to be there.
Also I was getting a "connecting modem has disconnected" message before when I try to connect to the three.net.au web page. This is now fixed.
Three Australia ExtROM
http://rapidshare.com/files/43544097/ExtRom.7z (size 4141 KB)
file password: threewm6extrom
Seems to work properly in the updated rom.
Related
Extended Roms???? ok i am a total n00b can anyone explain to me what these are or what you do with them?
Or at lease point me to a tutorial or info?
I also would like someone to explain what the kitchen is for?...............(& dont say cooking food ....)
any help point in the right direction would be a big help...
Thanx PPL
This is in the Wiki, I learnt from there.
Just for you, because you asked nicely, the extended ROM is what is loaded onto the phone that is non-essential to operation (basically, anything that isn't the operating system). When you hard reset, and then it starts installing software after boot; that's your extended ROM being loaded.
A lot of people make their own because they don't like/want/need the software in the extended ROM (see: O2 Active, iMate bundling Skype).
The whole cooking thing I don't really get either, I think it's just another word for rolling your own extended ROM.
Chris
Lewisham..
thanx for your help heading on over to wiki now to look a lot harder.
Cooking is all about customising your extended ROM to include the files and registry settings you want straight away after a hard reset. You will need to cook an extended ROM if you want to upgrade to 1.40 and keep your operator settings for GPRS etc.
Hi guys,
I only found this site a couple of days ago and I have already unlocked my XDA2s, stripped the O2 software, and tried out a few little tweaks.
However, I am really not confident enough yet to do anything more serious, despite being an IT & Communications engineer.
Could you please help me? I am looking for your latest ROM version to use on my XDA to completely remove the O2 stuff, hence stopping it attempting to install software after a reset. I am also missing some useful utilities, such as the battery monitor etc.
Are there any extended ROMs readily available for anyone to use, with some useful programs/utilities included?
I have looked at the wiki but don't really know what I am doing!!
Many thanks,
Bret
Oh, and I forgot to ask... is there anything available to debrand the XDA2s? I would love to stop it displaying the O2 start-up screen.
Maybe there should be an XDA-Developers start-up screen instead. :wink:
If you look through the wiki you can cusotmise your extended ROM to whatever, I ontice you have an xda 2s with vodafone- have you got any installation files (CABs) that set up GPRS, MMS for Vodafone? If not, there are cab files that are easy to add to your extended ROM, the files are here...
http://forum.xda-developers.com/viewtopic.php?t=13498&highlight=orange+mms+settings
Other useful files are things like Pocket MSN and Resco Explorer, which you have to buy, along with O2 Plus (free download - search for it, I haven't got a link!)
If you wan to make sure all the o2 rubbish is gone for good, check out the Extended ROM kitchen , find your ROM version and then unlock your extended ROM and delete all the Operator Customization CABs that install all that O2 crap.
If you want to change the startup images (better known as splash screens) have a look here...
http://forum.xda-developers.com/viewtopic.php?t=14475&highlight=gift
HTH
Fin
Hi Findus,
That's brilliant, thank you. My images have been changed and the only thing O2 now is the fascia which I can't do much about unfortunately.
I have also installed the Vodafone GPRS settings but none of them work for me, not even the straight forward dialup connection. Not sure why but the same error every time just says "No modem at this location" or something like that.
Many thanks anyway, I'm much happier now. I just need to find the correct iMate ROM. The only one I can see in the Wiki is the Asian one. Maybe I'm not looking hard enough.
Cheers, Bret
Relative newbie to this forum extrom Version editing
How can I edit my version numbers of the extrom now that I have it the way I want(sorta)?
One other other question, I have all the registry settings for my personalizations, how to I place those in the Extrom to be invoke after a hard reset. Do I create a cab file for this like the other programs or can I just exec REGEDIT4 personalized.reg? I also can not seem to find where the speed dial entries are stored.
Hi!
sorry, if i´m in the wrong thread and please excuse my english :?
i´ve got a "n00b" question concerning the branding of a MDA Pro/QTek 9000/HTC Universal.
Please correct me if i´m wrong: :roll:
The branding is performed after a hardreset and can be interuppted via a softreset after rebooting.
the branding also includes the network parameters for UMTS/GPRS/MMS/SMS/etc...
Is there a *.CAB file where all these configuration information is stored?
if not - how is the configuration done?
why i´m asking this:
i want to update my ROM, but i don´t want to enter all configs by hand...
Thanks in advance for your help :roll:
there is indeed a cab file for this
i dont know which one it is for your provider... i only know which one it is for the dutch t-mobile settings
you could find wich one it is:
1) copying the current extended rom to your SD card
2) hard reset and soft reset before the custimazation or update to new rom (incl. extended rom)
3) start the 1st cab file and install
4) check if settings are made
5) go to step 3 and use the next cab file, until you found the one that does the correct settings you want.
6) use it in the new rom (put it in extended rom or keep it in SD card)
alternatively you could install the new rom without the extended rom
[edit]
gprs and mms probably have different cabs, they do in the t-mobile rom, so search till you know which cabs you want
hi bartjan!
thanks for your reply. i also got t-mobile. could it be that there is a naming convention for the files ?
do you know which one(s) did it for you?
i want to get the brand out of the MDA - thats the main reason why i want to flash. would it make sense then to flash without the ext_ROM ?
thanks
cab-customization-tmnl-universal-01-03-04aug05.cab
signed_uni_tmonl_conn_112101.cab
signed_uni_tmonl_set_111101.cab
these are the ones i use for my tmnl (T-Mobile NetherLands) settings
one is for my internet, one for MMS and i dont remember what the tird one for is. dont remember which does which also :wink:
if you want the brand out you shouldnt flash without the extended rom indeed.
you could remove the extended rom in this rom (and keep warranty) or flash entirely and use a better and faster rom with aku2 and a2dp support if needed.
Depends also on which bits of branding you want to get rid of.
First, there's the physical printings of tmobile on the alu plate and next to the screen and keyboard. The one on the alu plate can allegedly be removed with a sugarcube without damaging the alu underneath, but that doesn't work for the others.
Second, there's the "t-mobile" screen that pops up as, as it were, the BIOS screen, which is a special part of the OS rom and which you can change using some utilities found around here. Comes up before windows is booted, and then it will get the rom version superimposed on it, and only then you move on to the next bit:
The t-mobile screen while windows is booting, which is also part of the OS ROM (I think) but in the regular filesystem somewhere (?).
Then fourth there's the t-mobile 'theme', pink and white everywhere and a special today screen. That can be turned off in settings>today. The actual presence of the theme is again in OS rom, but the extended rom as its first action actually turns it on. You can easily edit that out of the config.txt in the extended rom if you want (it's the exec cusTSK.exe line).
Then there's the t-mobile Today screen plugin with the 5 icons. Not entirely sure when that comes on. I think it should be extended rom but I can't find it in any of those cabs. Experiment.
And then there's a whole load of other subtler stuff.
hi!
many thanks for the replies!
going to sync. my mda tomorrow - maybe the files are the same (except the language part)
removing the branding on the plates doesn´t interest me 8)
just software branding is what i get rid of.
going to get the qtek rom (1.3x.xx) but first of all i have to check which bootloader i got. don´t know at the moment.
thanks for the tips removing the "branding screens and themes" maybe i´ll need it for the qtek rom?! :roll:
i would like the rom because of speed, i don´t want to listen to "stereo" music via bluetooth and at the moment i don´t need push email (especially looking at the battery times when using it)
thanks and have a nice day
The Qtek rom doesn't have numbers 3, 4, and 5, just number 2 (except that it says QTEK, of course), but that's relatively easily rectified and also a fairly minor problem, given that it only shows up for 10 seconds or so, only after a reset.
thanks!
didn´t have time this weekend to sync. maybe i´ll get it this week.
thanks for the replies!
thanks!
didn´t have time this weekend to sync. maybe i´ll get it this week.
thanks for the replies!
hey all universal lovers
which 1 is best right now......
HELMI AUK3.5 v1.3
or
IVAN AUK3.5 Test2
wll i hav seen one universal with crossbow loaded is it out ....if yes can guide me to it
thanks guys..
I think Helmi's has a few extra added tools, and Ivan's is vanilla.
As for crossbow, yes, some people have it as the Universal was the reference model, but it's only supposed to be Microsoft partners that have it, and they would get into trouble for letting other people have it.
I'm sure once it's out publically on new devices, it will be available on the Universal also.
this new roms causes my universal to power-off with no reason.
And it just came to life again if I take out the battery, put it on again and press the power button...
strange... :\
Words_vs_Pain said:
this new roms causes my universal to power-off with no reason.
And it just came to life again if I take out the battery, put it on again and press the power button...
strange... :\
Click to expand...
Click to collapse
I believe you man,
I got the same problem
so I went back to AKU2 till officiall Rom come
The problem i've had with Helmi's ROM is that when i turn the unit off, it closes applications and any documents i was working on at the time but hadn't saved would be lost.
I just tried to move to Ivan's to see if i get the same problem with his, but have other issues... (not related to the ROM see "not even stuck in bootloader" thread.
Generally though, i thought that the benefits of Helmi's ROM outweighed the problems.
How different is AKU3.5 to Crossbow WM6 Anyway? What are the headline items?
Hi,
i wanted to install Helmi's 1.3.1 ROM, but it is only about 23 MB.
It also gives me an error message when I try to unzip it with Winrar (it says that the file is corrupt...)
Thanks for your help...
The small HELMI size rom was in the process of being uploaded to the ftp if you look at the size now its larger and finished. The upload the reason why you got the corrupt rar error was because you downloaded what was their before the finished upload. So you only got part of the file. Has anyone looked into the settings/remove/programs I have been installing software and its empty so I don't know how to remove some programs with the HELMI AUK3.5 release. Other then that this is my only problem with it I love it.
Xeon_IV said:
The small HELMI size rom was in the process of being uploaded to the ftp if you look at the size now its larger and finished. The upload the reason why you got the corrupt rar error was because you downloaded what was their before the finished upload. So you only got part of the file. Has anyone looked into the settings/remove/programs I have been installing software and its empty so I don't know how to remove some programs with the HELMI AUK3.5 release. Other then that this is my only problem with it I love it.
Click to expand...
Click to collapse
guys,
be patient
as per the xda-portal,
the crossbow has been leaked & quite a few including Helmi have it
for legal reasons they cannot post the link here
i'm sure in a week or 2 v will b able to download it
its supposed to b faster & more stable
frz
Does anyone upgrade HP 614 to WM6.1?
Thanks!
any updates?
It's rom upgrade.
Thanks to Yevg001 from www.israpda.com
http://rapidshare.com/files/127265775/614c_WM61_19214.rar
pass:israpda.com
Sorry for my broken english.
This is link to post but on russian http://forum.israpda.com/viewtopic.php?p=60290#p60290 and for download you need regestred on forum.
So i think lin to dowmload it's ok!
UnRAR file to SDcard but not SDHC (not work) turn off device.
Push to record + mute buttons both and keep pushed. Push to power button and dismiss.
After you see SDLoder on display put device on table and wait for resume process.
After upgrade wait for windows logo and start yor's device.
Many thanks, I was searching for this for so long!!!
Just a couple of questions
1.It's on english?
2.It's works?
Do you know how to backup the original ROM before update?
thanks
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
It works really very well.
Big thanks to Yevg001!!!
Keep up the fantastic work!
If there are any news, please let us know immediately!
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Not work the link.
Please put another link.
muntean.calin said:
Not work the link.
Please put another link.
Click to expand...
Click to collapse
Link from rapishare is working, already downloading , I'll install tomorrow and make a report ASAP.
igorslon said:
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Click to expand...
Click to collapse
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Atlus said:
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Click to expand...
Click to collapse
Did you try to activate "receive all incoming beam" under connection settings?
Thanks for report, it doesn't look like a stead version.
bigu1975 said:
Did you try to activate "receive all incoming beam" under connection settings?
Click to expand...
Click to collapse
Many thanks, that was the problem, I think Incoming Beans referred to IR, as per my other device.
It now works great!!!
I recommend the update. :
-More stable
-faster than WM6.0
-SMS threaded
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
Hi Igor,
I have a 614c since end of March and 3 more around me (of friends) all running on Cellcom SIM. It seems that the ROM does not have Cellcom as a listed service provider.
Since work with HP on a new ROM and have a beta ROM installed on my unit HP asked a few time is there a STD (Sleep Till Death) problem in an Orange SIM, bacause many customers compain about this besides the BT volume and AGC problem. Can you say some thing. Further more, what Hebew are you using on 6 and 6.1.
Thanks
Nir
Hello everyone,
Hi I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
analyzer.x said:
Hello everyone,
I just purchased the HP iPAQ 612c from Australia, This is my first PDA. So I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
Click to expand...
Click to collapse
Origimal ROM http://forum.xda-developers.com/report.php?p=2374906
And this a new ROM upgrade from Yevg001 www.israpda.com
http://rapidshare.com/files/131025566/WM6.1_19965_19965.rar.html
pass:israpda.com
Hi igorslon,
Thanks for reply.
However, hmm I am not sure how that answers any of my questions, I already have the files from these links, I am just not sure how to use them.
Again how do I begin to create a flash.dio for example?
I came across XDAtools
http://wiki.xda-developers.com/index.php?pagename=CompleteTools
but I am not sure how I can use it to back up my rom to a file.
any practical help please would be much appreciated. Thanks
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
ZiCoN said:
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
Click to expand...
Click to collapse
No are the same
Thanks for the quick respons
As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun
Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip
thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend
does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos
Thx mate
Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude
casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos