Time to kill my Orbit and start again....
It's running painfully slowly and the GPS won't work so I'm going to hard reset my XDA and get rid of the O2 crap, then install TomTom. I know all this stuff is here somewhere but I’m up to my eyeballs in tech articles so…. Questions:
1. Should I upgrade the ROM, and if so can anybody point me to a suitable ROM image? If I do this should I unlock it first?
2. What's the best way of getting a clean install - is it to hard reset then soft reset before the O2 stuff loads? Or should I go for a cosporate install option (is this available for the Orbit) And how do I hard reset?
3. is there an easy way of setting up the O2 connection settings afterwards or do I have to do it manually?
Lots of questions and not enough time….
I have an O2 Orbit. Best thing to do is get it unlocked by imei-check. Then run USPL program from mobile6 forum. Makes it a lot easier to fix if something goes wrong at any time. After this you can flash the ROM to your hearts content. I use Black&Bluev3 and i can truly say that WM6 is amazing. To get a clean install just do a Hard Reset then when it boots back up, before the O2 customization routine runs just Soft reset. That's all there is to it. As far as O2 setting go. Have a look through the upgrading forum. There are usually a few postings of O2 settings. If not let me know. I have the HTC UK settings file on my PC. Anything else you need help with let me know.
Shand359 said:
I have an O2 Orbit. Best thing to do is get it unlocked by imei-check. Then run USPL program from mobile6 forum. Makes it a lot easier to fix if something goes wrong at any time. After this you can flash the ROM to your hearts content. I use Black&Bluev3 and i can truly say that WM6 is amazing. To get a clean install just do a Hard Reset then when it boots back up, before the O2 customization routine runs just Soft reset. That's all there is to it. As far as O2 setting go. Have a look through the upgrading forum. There are usually a few postings of O2 settings. If not let me know. I have the HTC UK settings file on my PC. Anything else you need help with let me know.
Click to expand...
Click to collapse
Thats different to my understanding of things.
If you are thinking of upgrading the rom (instead of just hard resetting the phone) then you will need to either get your phone CID unlocked with the imei-check team or run the Artemis USPL application prior to loading the new rom file. The USPL program temporarily 'unlocks' the CID whereas imei-check does it permanently. Once you've done either of these methods (I ran USPL as didn't want to pay £40 when I could get it done temporarily for free) you can then flash any of the roms suitable for your phone. I've got an o2 UK supplied Orbit and went with Tom's Black & Blue v3.
When you load the B&B rom it writes over the extended rom so all of the o2 programs are cleared so no need to soft-reset once its been flashed. This way will give you a fully functional phone with a lot of preinstalled apps (all of which are useful if not essential in my opinion) and none of the o2 junk on there.
Your other choice is to hard reset the phone and once its finished it'll prompt you about customising your phone. Simply soft reset before it gets a chance to run the ext_rom and none of the o2 crap will be on there. Now your phone will be pretty much as it left the factory with WM5 installed and thats it. If you're in the UK using o2 then the attached cab file contains all the settings that you'll need for MMS and GPRS etc.
As for question 3, see my previous statement about the cab file. Very useful to keep this as I've re-flashed my phone a few times and it makes the process a whole lot more bearable trust me!
thanks for the valuable info - I'll try Black&Bluev3 once I unlock. Excuse the ignorance, but do I just run the copy the O2 cab file to the Orbit, then run it from there?
Yep, as simple as that Probably best to copy it to your SD card and keep it on there as once the phone has been reflashed you won't have to connect up to a pc to install the network settings.
everything seemed to have gone fine, but after restarting the phone won't recognise the sim - before i even had a chance to enter the pin 3 times it reported that it required the unlocking code, and then refused to accept the unlocking code once I'd got that.
So now I've got a very sleek PDA, but no phone Any idea where I can get an O2 ROM from as I can't see it listed in the Artemis list, and am I looking for a ROM or extended ROM (what is the difference anyway?)
TIA
Peter
The b and b rom your usings originates from the leaked o2 orbit german rom - changed to wwe by bepe and tweaked by tom. So firstly i would try a hard reset or reflashing the rom. You dont need to flash USPL again as its an os only rom. If still not working flash original wm5 rom - see sticky in artemis mobile 6 forum for the link.
Related
Hi
I've successfully removed my o2 branding by applying the jasjar firmware from your FTP site...thanks for that.
My question to people who've done this before is as follows:
Will I need to run the NoID program in future or will imate firmwares always install now they see imate firmware already on?
If not, is there any way to permenantly change the CountryID?
Thanks
Paul
You need to use NoID every time except O2 Rom
Was looking to give this ago myself... I've download the ROM, JASJAR_WWE_11353_137_10301.zip but there's no NoID program in there.
Anybody care to help me out :? as i'd love to get rid of all the O2 rubbish!
I downloaded the noID program from the blueangel folder
ftp.xda-developers.com/BlueAngel/Tools/MaUpgradeUt_noID.zip
can't remember the ftp password...
put it in the folder of the rom upgrade, run it. it'll give the usual countryID error but the device will be in bootloader mode by now, so run noID again and this time it applies the firmware!
Cheers Paul 8)
I'll give it a go and report back...
For others, the link to NoID with password is ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
Anything interesting to report with the JasJar ROM as opposed to the O2 one?
Any extras or anything missing?? (aside from the O2 Active and UI stuff we want to get rid of)
Does it run faster and less buggy than the Exec ROM?
Also did you lose all files and settings, or did it retain them like some previous ROM updates for Windows Mobile 2003 did for HTC devices like the SPV C500?
Does it run faster and less buggy than the Exec ROM?
Also did you lose all files and settings, or did it retain them like some previous ROM updates for Windows Mobile 2003 did for HTC devices like the SPV C500?
i lost everything as far as i could tell.
benefits? well i just wanted rid of the o2 stuff and to understand how to do it for future (when imate releases are way ahead of o2 roms!)
+ it was kinda fun.
Hey..
I think in the moment there are many guys, out there, included me, that share the same problem: all probably unlocked their Dash's, Mail's or whatever using anykind of unlocking method (me, imei-check).
I am using a German MDA Mail, i needed to unlock it, in order to use it with my phone carrier apparently.
Now, the version of my phone is somewhat 1.18, and I want to update it to the WM6, like many others too. Both ways; SPL 1.11 and trying the update itself onyl lead to the same outcome : Invalid vendor/model id !
Many often say: yea, look in the CID unlock thread...well i did, very often, but there is no real solution to that problem, since basically, my Dash is unlocked, and presumably also CID unlocked since i got that from imei-check, which i think is a pioneer in that sector.
So, after all, what can we do!? Is it possible to still trying update that phone?
Hope we can find a solution, cuz i dun feel i am the only guy who has that problem.
I may have the same problem. Are you trying to unlock on Vista or XP?
I got it unlocked on XP, it worked fine i got to admit, no problems at all, my phone now seems to be unlocked and it works with another phone carrier, apart from T-Mo, which should be an indication FOR the CID unlock...
I dont think it is important to App unlock the Mail as well, cuz imei-check said it would be included...soo, would it be reasonable to ask imei-check, or does somebody else have an opinion about that?
I just upgraded to WM6. Here's what I did.
Unlocked it from imei-check. Ran SPL Upgrader. It gave me a Vendor ID being incorrect error.
Then I ran the WM6 upgrader from HTC. It upgraded and rebooted.
Now my phone is running WM6 and everything is fine.
Ha? you serious, thats very cool...well i tried it again with the spl upgrader, he went to 100%, aborted then with an invalid model error...then ran the upgrade afterwards, still didnt work... what about the version, did u take the German or the English one!?
Aaaargh, i am about to freak out..why doesnt it work, both SPL and the WM6 Upgrade give Invalid model errors, before i at least got a invalid vendor id, but not even that anymore...HELP...did imei-checks unlock didnt really work or what...
Yeah, I am very serious. I am using WM6 right now. I have a Dopod C720w.
Ok, here's what I did.
Unlocked through IMEI-check's software.
After that, I ran the SPL Upgrader. It went to 100% then gave me an Invalid Vendor ID error. I exited from there and then ran the HTC WM6 upgrade rom program. That started and slowly went to 100%. It said it had finished its job, so I removed my phone from the cable.
Then I proceeded to totally freak out because my phone looked like it was stuck at the Windows Mobile loading screen. I waited and after a long time, the rom initialised and ran through its first boot sequence.
Now its working perfectly and everything feels a bit faster.
If you went through the exact same steps, then I am not sure what your problem might be. Sorry. To tell you the truth, I am a completely noob at this who just did random steps and was lucky enough for it to work
P.S. I used the WWE (English) version, as I can't read German. I downloaded it off a rapidshare link posted in the big thread about HTC's rom release.
Well, i might not have much more skill either, but it is still quite worrying, is there maybe a difference between model and vendor id !? i am not quite sure what to try anymore, i remember yesterday, that i had a wrong vendor id as well, but today i just always got invalid model ids...very weird...well i will continue trying..do u remember what ur MDA mail version was before u updated it..sth like...1.18 !? by the way, which SPL upgrader are u using?
I am not using a MDA Mail. It's a Dopod c720w, same hardware, different branding.
This is the SPL Upgrader I used:
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Try with that. It should work.
I think my version before upgrading was 1.15 something.
Nah, i think its the same SPL Upgrader (same size...) but i just dont get the idea why it doesnt work, some experienced upgrader here who can explain us the process?!?! I am not sure whether a reset of all settings would do a thing?! geez feel quite helpless in the moment^^
I had the same problem
but the only thing I did when got those problems was leaving my Vista based laptop and try with an XP based, downloaded the activesync, connected my htc, installed the SPL (downgrade) and then the WM6 WWE ROM, oh, I remember, first I installed the german version by mistake, so I had to repeat the process with the SPL before applying the correct ROM again.
When I was unlocking my HTC, I had some problems on the vista system, and I deactivated the antivirus... Could that be related?
Good Luck!!!
You haven't answered as to whether you're using XP or Vista. I ran into the same issues trying to do the SPL and ROM updates via Vista, when I tried it on my XP system -- both worked without errors.
vivid22 said:
Nah, i think its the same SPL Upgrader (same size...) but i just dont get the idea why it doesnt work, some experienced upgrader here who can explain us the process?!?! I am not sure whether a reset of all settings would do a thing?! geez feel quite helpless in the moment^^
Click to expand...
Click to collapse
Yeah, after hearing so much about Vista, I used my XP system to update the rom. Worked fine.
i LOVE imei-check, i wrote them an email a moment ago to ask them for support, they replied me after 10 minutes with a full strategy how to encounter the problem, fabulous support i gotta admit, here's what they said:
Hello,
It sounds like you try to make a CROSS-MODEL-ID update (e.g. WiFi chip missing T-Mobile ROM on a WiFi enabled HTC device).
EVERYTHING IS POSSIBLE. You only have to use SPECIAL INSTRUCTIONS in order to make a CROSS-MODEL-ID update:
*If you REALLY do it EXACT step by step like described you will have no problems*
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/
- the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use:
"Hex Edit with Hex Workshop" from conext menu Search for word
"BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C
==> replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message:
"Data Crashed, contact service provider" (!NO PANIC!)
==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again).
In case you have problems please indicate the step number/letter which is not clear/not working for you.
*If you REALLY do it EXACT step by step like described you will have no problems*
Click to expand...
Click to collapse
P.S., would be a good idea to post this as a sticky, since it really explains how to update a original HTC rom on such wifi lacking Excalibur versions like the MDA Mail,
greets and good night
Did you try to email imei-check?
I know that exactly the same problem occurred when the T-Mo WM6 came out.
Imei-check had sent back their customers who were not able to upgrade a procedure how to modify their unlocker with a hex editor to change the model ID.
BTW: Model ID: there are two different models - EXCA100 and EXCA200 - take a look under your battery - german XDA Cosmo for example is EXCA200 (there the SPL seems not to work)
The other thing is the vendor ID. This seems to be solved by pof's Upgrade SPL 1.11
So simply try to write to imei-check and say that your unlock does not work - in the past they were very customer friendly - hope this didn't change meanwhile
EDIT: OK - vivid was a little bit faster - next time I should refresh the thread before I answer...
FYI !!
saw some post where people was being impatient during the upgrading process and completely abort the process ...etc
you are supposed to be at the logo screen for a period of time ... it doesn't meant it's hanged ... be patience !
just a note
Patience is the key...
Hm, OK, I did it... I bought the fracking UNL, took me one hour to figure how to get rid of the protection (security + antivirus) in my laptop that did not allow me to run the unlocking app. Finally, I got it.
First time I flash the ROM it did not work. I tried using first the SPL, and it worked nicely. After that, I could flash the ROM. Be patient, it takes some minutes to reboot, and it looks like is freezed, but not... wait!
Can´t see much difference from WM5, but I noticed a best performance in wifi connection. Now I´m fracking installing all the goodies I had before... bluetooth keyboard is not working... I will work it out a little bit.
Just in case, if someone wants the UNL for research... PM me.
I am glad it all worked out for you. Didn't know that the MDA Mail came without Wifi.
Wow, I must say, I am glad I used Imei-Check's service as well. That was an extremely helpful reply they sent you. Not seen many companies who do that.
That's exactly what i thought
Maybe we should write them a thankyou email for all their great help in name of the whole xda-developers community what u think
Anyhow, can somebody explain me real quick what should be definitely be installed to WM6?
@PhoenixAG: yeaa stupid T-Mobile GER...they didnt take away the wifi chip on the S710 or the newer ones, have no idea why they did it to the Excalibur then..
It would be a good idea to stick this solution.
I think many users in this forum have exactly the same problem in doing a cross model ID update. You can see Excalibur devices from many countries and carriers here.
I have a T-Mobile MDA Mail too which lacks the Wi-Fi and had to do the same steps after cid-unlocking it through imeicheck.
You have to do it really step by step. I had problems in doing it out of my memory for the new HTC ROM and wondered why it failed. But going through it step by step really works EVERY time I did it and thats now the third time.
First was installing T-Mobile Dash WM6 ROM, second the Russian HTC ROM and now finally the German HTC WM6 ROM.
Hi,
So i just got my MDA compact III (HTC Artemis) and I have noticed that people upgrade them to windows mobile 6.
Unfortunatley this is my first WM phone so I don't understand all these technical terms (ROM, Cooking, CID etc)
can anyone help me? is it worth upgrading? how do i back all my info up? what happens if it goes wrong?
thanks in advance.
COngrats on your new phone.
It is always worth it to upgrade to WM6.
There are 2 kinds of locks: CID and SIM.
SIM locks prevent you from using say a TMO phone on ATT.
CID unlocks prevent you from flashing a new ROM (like a wm6 distribution)
You can use some backup utility to well, back up. Search the forum for one.
If something goes wrong, you can just reflash the RUU, which stands for ROM Upgrade Utility. It has the "default" rom that you get from your new phone.
Thanks. This helped a lot.
Where do I get the WM6 distributions from? how do I install?
does the RUU come with the phone or do I download it from somewhere?
With all due respect to fzzyrn IT IS NOT ALWAYS WORTH UPGRADING!
Since this is your first WM phone and you just got it you should take a few weeks and get to know it.
There rule to follow here is: if it is not broken do not fix it!
WM 6 has only a few small new features (major one being HTML email support) which you may find you do not need.
First thing you need to do is to read the WiKi. You will find detailed explanation about terms like ROM, CID and SIM unlocking there.
Then if you are still determined to upgrade you should be aware of the following risks:
1) If you bought your phone through a cell company changing ROM even to an official version from HTC will void your warranty!
2) You must take care and read the instructions that come with the update you are using. Preforming update incorrectly, having battery run out or phone disconnected from your computer will result in a "bricked" (unusable) device!
3) Some WM 6 ROMs, change your device hardware ID. If you have purchased any programs that lock on to that ID during registration they will stop working.
Now for your phone there are two options:
1) Official update on HTC site (if I am not mistaking should be out already, but I am not sure)
2) "Cooked" or unofficial ROMs. Look for instructions in Artemis forum.
Keep in mind that ROMs are device specific. There is no such thing as generic / universal ROM.
Also keep in mind that various ROM versions including official WM 6 have different bugs. There is no answer to which is best or a guarantee that you like any of them better than your original WM 5 ROM.
Hi amm
I am new to windows mobile. i got this ophone of my old work mate.
I have tryed to put windows mobile 6 on the phone as it only have wm5 on it, but i get as far as the phone changing to upgrade mode ( 3 striped red, blue and green) screen and then it says that the phone cant comunicate.
I have tryed going though o2 website but it not recignizing my serial for the phone ( ex contract and also was a replacement handset)
any help would be nice, by the way i am on windows vist a, but i have also tryed it on xp, but the same still happns.
Thanks
Paul
anyone? noow any suggestions
This answer may seem condescending, but it isn't.
1. Are you attemtping to flash a rom update from the phone's original carrier or a non carrier specific rom? If a non carrier specific rom then see #2. If carrier specific did you download the rom from a secure place such as the carrier's website? If not, you may want to and try again.
2. Have you made sure your phone is CID and sim unlocked? This has to happen if you are attempting to flash a non carrier specific rom onto your phone. There is literature in your specific phone's Mobile 6 forum that is stickied or in the Wiki which will show you the best way to accomplish flashing. You must first read, then use the correct methods and tools or you will most likely create a brick. At this point of the game your phone is a little older and the path to Mobile 6 is well laid out. Which leads to the next question.
3. Have you done a search for this problem? You are not the first and will not be the last to have run into this issue. Using the search button does wonders here. If you have the cajones to flash your phone you are adventerous and the knowledge you will pick up will help in the long run. I say this because flashing is addictive and once you see the immediate improvements you will continue to look for better roms.
4. Please remember this is a developer's forum so the intelligence level is higher than most other forums but the patience level is much lower for those not willing to follow directions and/or help themselves. Some things have well laid out paths and others are trial and error. A lot of people here are doing a large amount of work for little to no money so please READ before embarking on your journey.
5. Get to work. Oh yeah. Please lit your phone's information in your signature. It will save someone asking the first 2 or 3 questions I did everytime. You could use mine as an example. Believe me it saves time and people are more willing to help.
hey thanks for your message
I am trying to flash the phone with Official O2 UK WM6 Trion (Hermes) rom 3.54.206.1_6275+radio 1.47 (3-8-2007) , the phone is simfree.
but even on trying to install Olipro v7 2.10 i get messages like 266 or 260 conection timed out or something. i am technical minded and i have tryed to serch for the awsers using google.
I suggest reading the Wiki and your Mobile 6 forums for the way to flash without using the usb cord. It will take a non-sdhc memory card and uses the nbh file from the rom you are flashing. Research that.
What is the HTC name for your phone? The Trion is a Hermes or a Wizard correct?
Also, CID and sim unlocking your phone will eliminate many future problems. Just be aware it automatically voids your warranty.
Okay - can you do a soft reset and have the phone work fine? That is step one. If so, then go to the Hermes Mobile 6 forum and check out the stickies. Dr. Puttingham wrote a great guide to flashing our phones.
If you can't get the phone working from the soft reset I suggest reading the Wiki and the Mobile 6 forums for the way to flash without using the usb cord. It will take a non-sdhc memory card and uses the nbh file from the rom you are flashing. Research that.
The Trion is a Hermes, which is what I have (Cingular 8525). I would suggest a non carrier rom of Mobile 6.1. You will find it to be much faster and stable.
Also, CID and sim unlocking your phone will eliminate many future problems. Just be aware it automatically voids your warranty.
hi i just found out that thephone is not a trion afterall it is a xda mini s, can this still be upgraded
I believe the Mini S is a Wizard. check out the forums. All the answers are there. I retired my Wizard 3 months ago . This is an easy problem to fix. Just read. I still suggest Mobile 6.1. Especially on the Wizard.
I have a Touch Diamond branded by telstra after reading looking through the forum for a while I can't find an answer to a perplexing question ....
Has anyone tried to change the rom on a telstra branded TD to the vodafone rom?
Or has anyone changed to a custom rom with a telstra branded and to what success?
Thanks everyone in advance for help.
While I haven't tried the Vodaphone Rom I have tried a number of other ROM's Dutty's, Swifts, Panosha's Simple, and now Hikari ( i don't like the Tf3d). All have worked well on the Telstra Network. I can't see why it won't work on the Vodaphone network. My nephew's work fine on the Optus network.
To be really honest the only extra functionality you will gain from the Vodafone ROM is the Vodafone specific software and the theme.
If it's just the theme you are after I suggest browsing this forum for one.
Alternatively if you're after the Vodafone ROM for Vodafone SIM... I'd skip that and jump straight onto one of the custom ROMs. The phone performance is a HEAP better than any of the telecommunication company's stock ROMs.
Food for thought.
Im on NextG with Telstra and i have tried nearly every rom here except vodafone.. but the only one flaw with using a unbranded telstra rom is being able to access bigpond.. like with foxtel and all that.. just doesnt pick it up as being a 3.5G phone.
i dunno why.. but i have just put it back to telstra rom and modded it completely myself. if i knew how to take like an image of it i would and post it up here but i wouldnt know one thing about cooking roms lol
I have a Telstra branded Diamond and am using it with an Optus SIM.
When I first got the phone I couldn't get it to accept the Optus settings for Internet access.
So... I upgraded it to one of the cooked ROMS. (Dia Duit and Duttys were tried)
Since then I haven't gone back to the standard ROM and enjoy the better performance.
loki429 said:
I have a Telstra branded Diamond and am using it with an Optus SIM.
When I first got the phone I couldn't get it to accept the Optus settings for Internet access.
So... I upgraded it to one of the cooked ROMS. (Dia Duit and Duttys were tried)
Since then I haven't gone back to the standard ROM and enjoy the better performance.
Click to expand...
Click to collapse
Did you run Connection Setups? I got my Voda and Optus to work. Try again.
luckyluke1137 said:
Im on NextG with Telstra and i have tried nearly every rom here except vodafone.. but the only one flaw with using a unbranded telstra rom is being able to access bigpond.. like with foxtel and all that.. just doesnt pick it up as being a 3.5G phone.
Click to expand...
Click to collapse
If you're talking about the Bigpong 'free to browse' page being different the all you need is to change the 'custom user agent' setting in Opera... see here
http://forum.xda-developers.com/showpost.php?p=2688822&postcount=260
But anyway... to answer the OP, I've flashed a stack of ROMs from here and am currently happy with CT's latest (HD version). Just remember to keep the original specs (Radio & ROM version no.s) in case you need to revert for warranty.
thanks for all the help
thanks for all your comments
I bought the touch diamond second hand, and didn't realise till after I'd parted with the money it was branded (HUGE newbie mistake) but I haven't bought a new phone for 6 years since I got the Nokia 6620.
I use a vodafone sim, and have it working pretty well, just the last lot of telstra locked stuff annoys me. Thanks to this fantastic forum I have been able to change and unlock most of it. Biggest thing is some things just won't work on it, because the current Telstra rom is 1.38.841.5 (vodafone rom is 1.96.XXX.X) and experience a fair share of the modding apps & cabs have problems or simply don't work.
I was thinking of the vodafone one simply because I'm with them. Also when I was first trying to unlock it talked to HTC and they said I couldn't use the vodafone rom on my telstra branded because the hardware in the telstra one is different to the vodafone one.
Thanks for the help, can anyone suggest the best custom rom, & what else do i need to change roms? I've got a bit of a IT background, just not with phones.
Really love this little phone, and I see potential for tf3d, but long way of modding to get it as I want it.
Thanks again everyone.
I have a similar question, thought I'd save wasting a new thread and post it here.
I've had a Telstra branded Diamond for a few months now, using it with a 3 Mobile SIM, and have had no worries until a couple of days ago, when I started roaming, and haven't been able to reconnect to the three mobile network since..
Any ideas??
The only question regarding Telstra branded Diamonds is returning to original SPL 1.38 for warranty reasons..
just one more thought
another question or two...
If I upgrade to another custom rom will I still have to unlock it after the hard reset?
I've been looking and think I've found the rom I want, but can't find a definitive link for hard spl. I've read the thread that everywhere directs me to and the links that I think are for the unsigned hardspl has the headind stock spls, or am I just misreading this.
Also does anyone know if CT 6.4 is signed or unsigned?
Guys - I understand the confusion surrounding upgrading and flashing ROMs as it was only recently I was in the same position.
So in an attempt to make it a little easier for those reading here I will pass on what has worked well for me...
1. Flash HardSPL as downloaded from here http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705 (it's unsigned but don't worry about that... it saves headaches if you want my opinion)
2. Download the ROM of your choice (as stated earlier - my preference is currently CT's v6.4HD... fast, stable and HD, what more do you want?)
3. Once you have the ROM, extract the .nbh file and rename it to DIAMIMG.nbh and copy this to the root of your internal storage on your Diamond
4. If you're ready to flash (meaning you've backed up whatever you wanna save) then hold the vol down and back button and press the reset button together until you see the tri-colour screen... you're then in the bootloader
5. The phone will search for the .nbh file you placed in memory and ask you to press the power button to confirm you want to flash... obviously you want to do this so sit back while it flashes
6. Once done, reset the phone and perform a hard reset (this is recommended by most ppl although I haven't always done it and never had any issues)
Now enjoy setting your phone up with a custom ROM...
If you want more detail then I strongly suggest you search around and read... it takes time and effort but it's definitely worth it if you want to flash with confidence...
Cheers
not as easy
Sorry if anyone read this orginal post just getting jitters when something went wrong with hardspl flash.
But a soft reset later and its still works. But it raises the question if something bad happens when flashing the hardspl and bootloader doesn't work what can be done apart from throwing phone away?
I assume as long as the bootloader works you can manually redo incomplete rom install?
Something going wrong with hard spl install is my biggest worry, it was a nats ear from happening a little earlier so I'm asking these questions.
Oh & last thing with CT's 6.4 rom what is the real difference between original TF3d and HD? How is the increased screen resolution handled? Do you have to scroll down for the area I cant see, or is it cut off so you can not access it, or is it squished to fit the smaller resolution?
Greenion said:
Sorry if anyone read this orginal post just getting jitters when something went wrong with hardspl flash.
But a soft reset later and its still works. But it raises the question if something bad happens when flashing the hardspl and bootloader doesn't work what can be done apart from throwing phone away?
I assume as long as the bootloader works you can manually redo incomplete rom install?
Something going wrong with hard spl install is my biggest worry, it was a nats ear from happening a little earlier so I'm asking these questions.
Click to expand...
Click to collapse
As long as you can access the bootloader you should be able to sort out the phone... personally I've never had an issue with flashing (and on average I've flashed my two Diamonds (a 130 and 100) an easy 30-40 times).
My preference with flashing is to do it from the internal storage (seems the most logical in terms of reliability - and is also by far the fastest) but I'm not sure if HardSPL can be done that way - if it is possible I'd be strongly recommending it - USB connections are just too dicey for something that serious.
Greenion said:
Also does anyone know if CT 6.4 is signed or unsigned?
Click to expand...
Click to collapse
I have the OliNex 1.4 hard spl and I can flash CT's ROM without any problem.
done
Well it done.
A little easier than I was expecting but just as concerning, but over now.
Finally went with CT's 6.4 Original, I can always change to the HD or just add one of the HD add ons.
Everything is running smooth and well. Finally all the testra crap is gone.
Thanks to everyone for their help and kind advice.
This is a GREAT forum, its been a fantastic help and resource.
Till next time
How do you flash the new 2.03 ROM? I have tried with the executable from HTC and it gives me an invalid ID error.
Windza said:
As long as you can access the bootloader you should be able to sort out the phone... personally I've never had an issue with flashing (and on average I've flashed my two Diamonds (a 130 and 100) an easy 30-40 times).
My preference with flashing is to do it from the internal storage (seems the most logical in terms of reliability - and is also by far the fastest) but I'm not sure if HardSPL can be done that way - if it is possible I'd be strongly recommending it - USB connections are just too dicey for something that serious.
Click to expand...
Click to collapse