Hi,
I tried lots of WM6 roms so far (black, lvsw, vp3g, faria, schaps) and I'm really puzzled about one thing. Why do WM6 roms not reconnect to activesync if they are soft rest. The problem that when I install certain software such as PhoneAlarm or Resco Keyboard Pro the devices perform a soft reset after installation. With WM5 roms it was normal behaviour that the devices would reconnect to activesync after they rebooted. But the wm6 roms seem to be different. If the device makes a soft reset and is still connected to the USB cable it wont resync with activesync until you unplug and re-plug the device from the USB cable. I know it's not a very big problem but I still finde it strange behaviour especially because this worked on WM5 roms and I can't see why MS should change this beviour.
Is this something which can be fixed through .cab or other tweaks? Maybe one of the rom chiefs can fix it for upcoming WM6 releases...?
Can anybody shed more light on this?
Best regards,
Marc
I have the same problem
I have the same problem
what version of ActiveSync do u have?
I'm using the latest ActiveSync 4.5.0
Related
Hi all
Having trouble installing Tomtom 5 on my SPV m2000. I have just upgaded to WM5 and activesync 4. Wen I run the installer for the TT5 application it errors and aborts . tried uninstalling Ativesync 4 including registry entries and tried reinstalling 3.8. Activesync doesn't detect my PDA now, I think I read somewhere that it relates to software in WM5 that requires activesync 4.
anybody any idea's how to get TT5 on my PDA without having to revert back to WM2002se?
:?
OK,OK! I know what ya gonna say! I have just found a string relating to the same prob and a resolution. orry for wasting ya time
I've searched through the forums and can't find reference to anyone having problems upgrading due to their PC.
I've upgraded ROMs many times before but the most recent venture on my MDA Pro to WM6 (hemi 1.1) has been unsuccessful.
Basically starting 'ROMUpgradeUt' brings up, 'Device Software Update Utility' then clicking next starts the sofware search for the device but then it shuts down with no error message!
I've noticed other ROMs to give me the same problem now (eg Helmi AKU 3.5).
Tried:removing SD card, removing SIM, 'device upgrade mode'(light, power+reset), unchecking usb connection, hard reset, computer restart (XP),
ActiveSync 4.5 5059 working fine, country id error upgrade, tried another MDA Pro same problem.
I've run out of ideas guys.
PS last time i tried to upgrade to WM6 i got stuck on boot screen and had to use the mtty tool to reboot.
I think you should try an other mashine.
SOLVED !
Universal didn't like the different USB port at the back of the computer i was using. I had connected an external hard drive to 'its' port.
This things more touchy than my wife!
AbuGWM5 said:
This things more touchy than my wife!
Click to expand...
Click to collapse
ROFL It's sometimes scary how much I compare my PC to my ex lol...
Hi everyone!
I have already posted this thread on the Modaco forum but I'm still getting no answer. I'm posting it here. I know there are a few threads about ActiveSync problems but none of them solves my problem!
I'm using an Orange SPV M650 (French branded HTC P3300) for a few monthes now, and I've been successfully syncing it with ActiveSync over Bluetooth from the beginning. At this time, I had created a BT COM port with the Windows Bluetooth stack, configured ActiveSync v4.5 to authorize connections through that port ; then paired my PDAPhone to the computer and checked the "ActiveSync" option that was available in the services listing. I was then able to sync using the ActiveSync application on my PPC.
A few days ago I deleted the USB Bluetooth dongle on my laptop from the "Device manager", it's been installed back successfully on the next reboot BUT now I can't synchronize. The "ActiveSync" service no longer appears in the services list of my computer from the device's BT configuration tool. I only have "Serial port" showing.
Reinstalled ActiveSync twice, didn't changed anything.
What should I do?
Thank you!
(here are a few screenshots, French language used)
Up! Nobody's an idea?
i can only suggest something i do when i have similar problems:
1. uninstall everything involved
2. manually clean up all involved registry keys
sometimes, the remainders of not completely uninstalled programs can cause problems if you install them again.
i never ran into your specific problem, but trying this will at least make you forget your synch problem for the 60mins you are busy.
...and sometimes, above procedure even helps!
I had to reinstall from scratch Windows XP for other reasons and the thing is still not working! I really don't understand, I'm wondering if I'm not doing something wrong... How should I do?
Hey..
Hey found this manual for you..
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Thank you. It's exactly that way that I'm trying! The problem is at step 12, the only service available on my paired computer is a "Serial port", not ActiveSync. I double checked that ActiveSync was properly configured on the correct serial port and it is...
i had this problem with XP, i sorted it out, but cant remembe quite how i did it, i have a feeling it was to do with the COM ports that you use for blueooth. upgraded to Vista and no problems, my suggestion is to go to vista, its much better then XP and everything works.
I have hardware unsupported under Vista (pro-soundcard) and my computer is a little bit too old (512 MB of RAM are fine with XP, won't be with Vista). Anyway I'm okay with XP, I won't change my OS just for an ActiveSync problem.
Anyway I updated my Artemis with the B&B 3.7 WM6 ROM and now it works... Was a problem on the phone I guess.
Thank you for your help
My Dopod C730 with WM6 only sync on the first time and my contacts are there but it doesn't show . I already tryed all suggestions to sync the phone but none worked. If I change/upgrade ROM can this be fixed?
prqual said:
My Dopod C730 with WM6 only sync on the first time and my contacts are there but it doesn't show . I already tryed all suggestions to sync the phone but none worked. If I change/upgrade ROM can this be fixed?
Click to expand...
Click to collapse
It's not a wm6 or any Rom problem,it's your activesync not establishing connection,check the activesync connectivity,uninstall the activesync,download the latest version 4.5,install,reboot your pc and connect with usb cable and reestablish connectivity.If it still doesn't synchronize,check your usb cable or mini usb port of your phone for proper connectivity.
cheers
Tks for answering. Done all that. doesn't sync. Only when I do a hard reset, it syncs the 1st time. Besides, when I'm using my phone, If I type a name the contacts are there, but if I press the icon, it comes out blank. I guess I myght have 2 different problems.
I changed the sync cable and everything is working now .
I had to soft reset my orbit the otherday and since then have been unable to sync with my pc.
I have tried re installing activesync and soft resetting the orbit with no joy. when I select activesync on the orbit I get the message displayed in the attached jpeg.
I would rather not do a hard reset as some of the programs I use (particularly DrugDoses) use a device key for registration which is changed whenever the device is hard reset.
Any help and advice would be appreciated.
Forgot to add, I am using XP pro and my other WM6 device has no problems so the problem must be on the orbit.
ROM: 3.4.206.2 WWE
ROM Date: 8/31/07
Radio: 02.98.90
Protocol: 4.1.13.47
Same problem
I have the same problem since installing B&B 4.3 GER on my device. I should mention that I am using Vista.
Ideas, anybody?
I had the same problem when i was running B&B 4.3 whilst using xp. At first i thought it was a bad connection from the phone to the mini usb cable (as i manange to get connected whilst bending the wire). I managed to get a connection after 2 days of trying. I then reflashed the phone with a different ROM & all was well again. For some reason some people are affected by this whilst others arent. No idea why, but there is a conflict somewhere which was resolved once i changed to a different ROM. Hope this helps. But dont dispair cos you will eventually get a connection & then you can reflash.
On PPC, You could try looking at connections, USB connection and make sure advanced usb is disabled. May help.