I have a HTC P3300 and a radio-cd pioneer DEH-P55BT. I cannot use autoconnect due to any problem with BT compatibility … How can I solve it?
I think could be a software problem, because with native BT setting tool I can connect the phone from the radio, but I cannot see battery level and signal-power, but using a program for connecting, I have to connect from the radio but I can see in the radio the battery leve and signal-power.
How can I make my own program ...
Thks for your help
I was only able to use my Orbit with my DEH-70BT after changing the bluetooth settings in the registry. The stereo only looks for phones, and the Orbit reports it eslf as a PDA, so it is ignored.
After the change your Orbit will report it is a phone and not a PDA.
As to the level indicators, I use JetWare Mobile.
It is only $15 www.jetwaremobile.com
This is where I got the info from to change the registry.
http://forum.xda-developers.com/showthread.php?t=290871
approved101 said:
I have a HTC P3300 and a radio-cd pioneer DEH-P55BT. I cannot use autoconnect due to any problem with BT compatibility … How can I solve it?
I think could be a software problem, because with native BT setting tool I can connect the phone from the radio, but I cannot see battery level and signal-power, but using a program for connecting, I have to connect from the radio but I can see in the radio the battery leve and signal-power.
How can I make my own program ...
Thks for your help
Click to expand...
Click to collapse
hello, sorry for my bad englisch. I have the solution for your problem. I had the same problem.
the solution is:
registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S
and change the value of the COD-key from 120114 to (hexadecimaal) in 52020C
your htc see your pda now as a phone.
good luck!
Related
Hi! Im using an iMate PDA2K with TomTom navigator 5.1 and a GlobalSat BT 338 receiver. Everything works but sometimes after using TT,I notice that the bluetooth icon in the lower tray has disappeared.I then have to go and click on the Run BT Tray file in the windows/startup folder to get it back.
anyone know why this is happening and the solution for this?
thanks in advance.
Kaz
Hi
Cant help but I have a very similar problem.
Tomtom turns my BT off on exit from tt.
On some occassions the whole of BT manager and settings have frozen!
hope someone can help!
Just configure ir for normal cable gps instead of bluetooth...
hi
what is ir? what steps do i need to take? :shock:
I think the "ir" was a typo for it.....
I have configured it for "other wired GPS receiver and like I said, it works fine but sometimes (more often lately) when I exit from TT, the BT icon is not there in the system tray...
Have you got anything like the O2 active interface loaded onto the device, - if so get rid of it. This causes all sorts of instability, Once deleted mines been great, and with the new ROM from O2, its even better - Mike
nope, mine is the iMate version without any of the O2 stuff....
it's like the BT icon disappears randomly from the system tray....going to File Explorer and then the windows/startup folder and clicking on Run_BTTray gets it back.....and the BT works fine too..... :? :shock:
I have the 1.40 iMate ROM and apart from this,every thing seems to be peachy.....anyone got any clues what's going on????something is "closing" the BT in the system tray..how do I find out what it is and stop it....
hi all
I have flashed my Qtek 9000 with o2 rom and all works fine. but I have noticed one problem which is when I chose the basic defullt setting of the O2 the Bluetooth wont received and cant be descoverd even if the bluetooth is on and there is a tick on make the divce discoverable.
However, when i chose the Corporate setting of the O2 and the code 0506 the bluetooth works fine sending and receiving. Any thought of why is this problem happing ?
Thanks
I think there is a BLUETOOTH PATCH included in the Extended ROM. Maybe Corporate mode installs it, but Basic no.
Can you Install Basic mode and try to run the file from the extended ROM? It might look something like this:
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
I'm not sure. Goodluck
thanks brother still facing the same problem
Is your Bluetooth Problem in regards to connecting to Hands Free Headsets? Or transfereing files, etc.?
What exactly can't you do with the Bluetooth in Basic that you can do in Bluetooth of Corporate?
thanks Jorgee
i managed to solve it by going back to the old o2 rom
it was file transfer problem
:wink:
You have to have the BEAM option in CONNECTIONS enabled to be able to transfer OBEX Bluetooth
I have upgraded my MDA PRO with the recent TMobile UK firmware:
ROM 1.20.32WWE
ExtROM 1.20.120WWE
Radio: 1.06.00
I can use my Parrot CK 3100 with it, but my contacts are not synchronized.
Has anyone figured-out how to do it?
Many thanks.
Can't be done automatically (confirmed by Parrot)
You will have to select them one-by-one and then beam to the ck3100
OR: Using PocketInformant which allows you to select all contacts (or a subset) and beam them just with one click.
I have upgraded the Parrot firmware from 1.13 to 1.14b (they mention this release has better synchronization for PDA's with WM5) and ... guess what?
I WORKED!!! My contacts were automatically synchronized!
I repeat: I didn't have to send them one by one nor use Pocket Informant! It worked automatically!
Great!
Well, I have now my contacts synchronized, but after a few days of driving I realize my Bluetooth connection is not stable. My Parrot Partnership is regularly erased after a while.
Is there a Bluetooth patch a have to install? Do I have to upgrade my radio to 1.09, maybe?
Thanks for your help.
How can i disabled Sync ?¿?
Regards
I have the XDA Exec
ROM Version 1.30.107
Radio Version 1.09.00
ExtROM Version 1.30.162 WWE
I too have the probelem of the pairning regularly disapearing - how many others have this problem with the CK3100
I have updated to the latest 14b Flash for the parrot but this does not help.
Im assuming its an XDA Exec issue - does anyone know if O2 will be releasing a new rom with more stable bluetooth in the near future
I have XDA EXEC with latest i-mate ROM (1.30.76 with 1.09.00 radio) and my Parrot synchronizes everything (even the calls registering). No problem with bluetooth (using latest 4.14b).
I installed JetWARE (http://www.jetwaremobile.com/index.htm) and CK3100 gives me also the battery status, the network signal strength and Network name.
The only problem I now have is that I can't use XDA voice dial (using voice command) when I presse CK3100 to make voice dial. It says "connection failure to recogning system". Can someone help me to put this working?
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it.
It seems the Jasjar turns off BT or it just does not show up. I need to go into BT manager and renable BT on the JJ or select the CK3100 and set it as the hands free.
It seems to be different problems, and it is really annoying me.
I am running the CK3100 v14 BIOS and the 1.09 Radio, I might try the 1.11 radio.
parrot3100
I have the same problem. It looks like a program is causing a memory leak or something like that.
RadioROM 1.11.00 is worse (in my case) then v1.09.00. At this moment I have started to rule out installed applications.
I am no shure whether this is caused bij the Parrot since my BT GPS receiver has identical problems.
mda pro loose BT connection with ck3100
Gadget_Junkie said:
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it. ...
Click to expand...
Click to collapse
I have updated my mda pro with the dutch t-mobile rom 1.30.233 WWE. Since that time is sync-contacts working on my ck3100. But I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. Who can resolve the problem.
And how can i stop the automatic sync of the contacts, every time?
Tnx, Lucas
I have exact the same problem with my mda-pro, every time the paring and connection is lost.
Losing BT connection
lkwq said:
... I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. ...
Click to expand...
Click to collapse
Updating the firmware to 4.15b do not solve the problem. Still losing BT connection. Had to wait to 4.16, Parrot said.
parrot.biz said:
... The Next firmware which is 4.16 will be released in a few weeks.
What you can do is :
- Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE
K600,K750 No Sync
- Connect your phone to the CK3100 carkit.
- On the kit, Enable SETTINGS/ADV SETTINGS/OBJECT PUSH/D500, My-X8.
- From Outlook, select the contacts you want to send to your kit.
- Select FILE->SEND VIA BLUETOOTH->Other, Wait for the kit to be detected
by the computer.
- Enter the Pin CODE 1234 when asked, the contact is sent...
Click to expand...
Click to collapse
I hope it works.
Lucas
BT connection problems
The solution is to connect the htc universal with the Parrot ck3100 on this way:
-Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE K600,K750 No Sync.
-Connect your phone to the CK3100 carkit. Code is 1234.
Click to expand...
Click to collapse
Then remains the connection in position.
You can beam your contacts to the Parrot, one by one. Not all your contacts, but only the contacts you need on your Parrot. And no /H/W/M, of course.
So, it all works. Success!
Lucas
I have connected the TyTn to the car hansfree (Parrot) without problems.
The only problem is that I have to confirm the connection each time I want to use the hansfree and I have to introduce the password, etc.
In WM5 there was the possibility of adding trust devices to avoid confirming the connection each time. Is it not possible in WM6?
Thanks!!!!
I think it might be a problem on your end and not of the rom. I have synced up my 8525 with my friends bmw and had no problems at all. none at all. so you might need to reflash or check your stuff.
It works very well with my Acura TL handsfree so it may be a problem at your end.
Shamim
jaimedevesa said:
I have connected the TyTn to the car hansfree (Parrot) without problems.
The only problem is that I have to confirm the connection each time I want to use the hansfree and I have to introduce the password, etc.
Click to expand...
Click to collapse
Password or passkey ? I suspect you did not pair your device correctly. "Comm Manager" - Settings - Bluetooth Settings. Do you see your Parrot device in the list ? If yes - try to delete it and re-add it.
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??