Related
I have upgraded my MDA PRO with the recent TMobile UK firmware:
ROM 1.20.32WWE
ExtROM 1.20.120WWE
Radio: 1.06.00
I can use my Parrot CK 3100 with it, but my contacts are not synchronized.
Has anyone figured-out how to do it?
Many thanks.
Can't be done automatically (confirmed by Parrot)
You will have to select them one-by-one and then beam to the ck3100
OR: Using PocketInformant which allows you to select all contacts (or a subset) and beam them just with one click.
I have upgraded the Parrot firmware from 1.13 to 1.14b (they mention this release has better synchronization for PDA's with WM5) and ... guess what?
I WORKED!!! My contacts were automatically synchronized!
I repeat: I didn't have to send them one by one nor use Pocket Informant! It worked automatically!
Great!
Well, I have now my contacts synchronized, but after a few days of driving I realize my Bluetooth connection is not stable. My Parrot Partnership is regularly erased after a while.
Is there a Bluetooth patch a have to install? Do I have to upgrade my radio to 1.09, maybe?
Thanks for your help.
How can i disabled Sync ?¿?
Regards
I have the XDA Exec
ROM Version 1.30.107
Radio Version 1.09.00
ExtROM Version 1.30.162 WWE
I too have the probelem of the pairning regularly disapearing - how many others have this problem with the CK3100
I have updated to the latest 14b Flash for the parrot but this does not help.
Im assuming its an XDA Exec issue - does anyone know if O2 will be releasing a new rom with more stable bluetooth in the near future
I have XDA EXEC with latest i-mate ROM (1.30.76 with 1.09.00 radio) and my Parrot synchronizes everything (even the calls registering). No problem with bluetooth (using latest 4.14b).
I installed JetWARE (http://www.jetwaremobile.com/index.htm) and CK3100 gives me also the battery status, the network signal strength and Network name.
The only problem I now have is that I can't use XDA voice dial (using voice command) when I presse CK3100 to make voice dial. It says "connection failure to recogning system". Can someone help me to put this working?
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it.
It seems the Jasjar turns off BT or it just does not show up. I need to go into BT manager and renable BT on the JJ or select the CK3100 and set it as the hands free.
It seems to be different problems, and it is really annoying me.
I am running the CK3100 v14 BIOS and the 1.09 Radio, I might try the 1.11 radio.
parrot3100
I have the same problem. It looks like a program is causing a memory leak or something like that.
RadioROM 1.11.00 is worse (in my case) then v1.09.00. At this moment I have started to rule out installed applications.
I am no shure whether this is caused bij the Parrot since my BT GPS receiver has identical problems.
mda pro loose BT connection with ck3100
Gadget_Junkie said:
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it. ...
Click to expand...
Click to collapse
I have updated my mda pro with the dutch t-mobile rom 1.30.233 WWE. Since that time is sync-contacts working on my ck3100. But I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. Who can resolve the problem.
And how can i stop the automatic sync of the contacts, every time?
Tnx, Lucas
I have exact the same problem with my mda-pro, every time the paring and connection is lost.
Losing BT connection
lkwq said:
... I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. ...
Click to expand...
Click to collapse
Updating the firmware to 4.15b do not solve the problem. Still losing BT connection. Had to wait to 4.16, Parrot said.
parrot.biz said:
... The Next firmware which is 4.16 will be released in a few weeks.
What you can do is :
- Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE
K600,K750 No Sync
- Connect your phone to the CK3100 carkit.
- On the kit, Enable SETTINGS/ADV SETTINGS/OBJECT PUSH/D500, My-X8.
- From Outlook, select the contacts you want to send to your kit.
- Select FILE->SEND VIA BLUETOOTH->Other, Wait for the kit to be detected
by the computer.
- Enter the Pin CODE 1234 when asked, the contact is sent...
Click to expand...
Click to collapse
I hope it works.
Lucas
BT connection problems
The solution is to connect the htc universal with the Parrot ck3100 on this way:
-Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE K600,K750 No Sync.
-Connect your phone to the CK3100 carkit. Code is 1234.
Click to expand...
Click to collapse
Then remains the connection in position.
You can beam your contacts to the Parrot, one by one. Not all your contacts, but only the contacts you need on your Parrot. And no /H/W/M, of course.
So, it all works. Success!
Lucas
Hello xda community!
I have a huge problem with my Hermes using Shaps Roms (latest), besides I tried all of the roms till now, and bluetooth devices!
I tried 3 devices till now:
Parrot 3200
Audi UHV
and a Sennheiser VMX 100 ear- handsfree
so first I had problems with the Audi to get a stable BT transmission without disconnect which is solved due to a rom change!
Now the problem is with picking up, or dialing.
For example BT -> Audi UHV connected!
Using phonebook to dial a number -> dialing ... it displays in the Audi -> Dialing.. and when the connection is established its shoud says connected like in phone but sometimes just shows "Hanging up.." -> while the Hermes display says connected!
And I am definitly connected to the person but I cant hear anything not on the phone or the BT Kit!
This is extremly anoying -> and not only withe the Audi, even the simple Sennheiser earphone there is exactly the same problem! or the Parrot!
The phone is not able to send correct "commands" Pick UP -> Connected -> Disconnected. I mean THIS IS A HORROR!
Its not a permanent error but it it shows quite often (6 tomes out of 10 calls) up it does it again and again till sofot reset!
Please someone help me !!!!!
PS i also tried Jetware Mobile same problem no difference ....
Greets,
fire
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
CRCinAU said:
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
Click to expand...
Click to collapse
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
firefoxy said:
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Click to expand...
Click to collapse
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Hissing Syd said:
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Click to expand...
Click to collapse
interesting.. so if you dial a number the tytn sends to your ford the correct status of the calling process ?
start - call - stop ?
never had such issue:
Ford: start - stop
Hermes: start - call ...
silence on both ?
CRCinAU said:
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
Click to expand...
Click to collapse
First results:
15 minutes it works like a charm - no phonebook entries just the plain rom.
now I ll snyc with outlook and start another test!
* Stange thing is that the Audi UHV found my phonebook entries although i dind´t snyced them. Sim is empy ...
can there be something in extended rom ?
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
CRCinAU said:
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
Click to expand...
Click to collapse
First of all thanks for all the replies!!
The Audi UHV is capable to use rSAP, but I have no idea what it does and what it´s good for.
What is the difference between SAP and HFP ? I have nothing on the sim card.
Now you're getting a bit beyond my knowledge as I don't have any of these systems to test or experiment with
+1
I have had the same problems with multiple ROMs.
Trying to link a Garmin GPS, and other Hands Free devices.
Seems like a Hermes thing rather than the ROMs.
Try deleting the BT device from the Hermes, but not the device. Re-sync from the device.
Not sure if that will help, but I had weird BT problems with the 4.30 rom and that fixed it. No problems at all with the 4.31 though.
I will start some testing today and report back tonight!
Maybe it was the rsap being enabled in Shaps roms .... we will see!
The question is, should I install Jetware Mobile or not ?
It seems to be faster in syncing if I have it installed.
So far I tested it yesterday for half an hour and it worked!
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
radak23 said:
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
Click to expand...
Click to collapse
Hi, I am using my Touch Pro 2 with the same HU and Bluetooth adaptor as you but no such problem so far.
It used to have this problem then I try to connect using Window CE as the phone setup and choose another Connection Key instead of default 0000 to pair the phone with the HU.
ok, well i just tried connecting via searching for the device from the HU. it finds my device - i tap enter (to connect on HU) then it just jumps to a blue flashing 'connecting' then goes to a yellow 'error' straight away. if i select 'open' on the HU then it connects (connecting with a different ID - a number '6') but only untill i restart the HU.
also as a test i just tried an Xperia (just had one laying around LOL) and it does the exact same as mine!! ARRRRGHHH!
so im glad to say i believe it is not an HTC issue!
ok so i have an update - the problem is my HU will not pair correctly and it will not store a pairing. great.
another quick one - have found others are having trouble with their HU/adapters. thanks anyway everyone!
TP2 Bluetooth and voice dialing working fine ???
Have you tried to reset your carkit? I had the same problem after the rom-update with my TP1 and I put my carkit (Bury CC9060) back to factory settings. So I did the same this morning after I updated my TP2 and now it works just like a charm. Of course I don't know if your carkit has this possibility. Good luck, greetz Ton
'iznogoooog' - yes it work perfectly until you restart either device - 'ton66' - unfortunatley a reset is pretty much all i can do!!! eeeeek!
hopefully a reset will fix it! - i did unplug my b/tooth adapter then switch the unit on - then off then plug it back in.. didnt change anything.. oh well! will do complete re-set 2day!
BTW:
thanks so much for everyones help!
Got a questions. I am using the AVX-826 with build in Bluetooh. I want to know if you guys get the Signal Strength show on your Head unit is correct. on my unit pair with TP2. The Signal Strength indicator doesn't move. it always show the strength with my phone is connected to the unit and it stay that way.
The Battery Strength indicator does work and show the correct battery level.
I have exactly the same prob!
Hi,
I have a AXV800 and a BTA200.
My first device was a Artemis with WM6.0. No problem so far!
Then I changend to a Diamond with WM 6.1 and had the same problem as mentioned before. Now I tried my new TP2 and still the same problem.
And I tried the old Artemis again with a new 6.1 ROM and the same problem as on the other two phones.
Now I think it depends on the WM build. 6.0 seems to work 6.1 not!!!!!!!!!!
I did a reset on my AVX800 two times without luck!
I think I'm going to use a normal phone without Windows mobile for the next test!
Schelbi.
I'm having trouble that I never had on my Tilt in regards to using a bluetooth GPS with my Tilt 2.
I've always used GPSGate, but I can't get it to make a Bluetooth connection, so I'm trying a SPP com port connection, but when I do that it prompts me every time it wants to open the connection with a dialog like:
Bluetooth serial port
Please select a serial port connction shortcut to connect:
Add
HOLUX GPSlim 236 (SPP Slave)
I already have created the port (com2) in the Bluetooth prefs, and if I select the HOLUX entry it does connect, but it prompts every single time. Is there a way to make this reconnect automatically or any suggestions for the Bluetooth connection problem?
Bump, maybe someone else is interested and trying this. Tilt 2's GPS seems better than the original Tilt but still nowhere near as good as a good Sirfstar chipset.
khaytsus said:
Bump, maybe someone else is interested and trying this. Tilt 2's GPS seems better than the original Tilt but still nowhere near as good as a good Sirfstar chipset.
Click to expand...
Click to collapse
Well, i have the same problem as you with my European Pro2.
I allready reported this problem to HTC, pointing out that there is not posible to save the hardware settings on External GPS settings tab.
i'm also interested in a workaround.
Old stacks...
You used to be able to do it with a registry flag. But that no longer works. Just search for BTBrowserEnabled.
Nothing else works either that I have tried. have also placed a call to HTC about it. Using a HTC HD2 WM6.5.
At least if there was only one device it could auto connect. But no that would have far too easy.
Joffa.
Joffa said:
You used to be able to do it with a registry flag. But that no longer works. Just search for BTBrowserEnabled.
Nothing else works either that I have tried. have also placed a call to HTC about it. Using a HTC HD2 WM6.5.
At least if there was only one device it could auto connect. But no that would have far too easy.
Joffa.
Click to expand...
Click to collapse
If you find out anything more, please post
khaytsus said:
I'm having trouble that I never had on my Tilt in regards to using a bluetooth GPS with my Tilt 2.
I've always used GPSGate, but I can't get it to make a Bluetooth connection, so I'm trying a SPP com port connection, but when I do that it prompts me every time it wants to open the connection with a dialog like:
Bluetooth serial port
Please select a serial port connction shortcut to connect:
Add
HOLUX GPSlim 236 (SPP Slave)
I already have created the port (com2) in the Bluetooth prefs, and if I select the HOLUX entry it does connect, but it prompts every single time. Is there a way to make this reconnect automatically or any suggestions for the Bluetooth connection problem?
Click to expand...
Click to collapse
I have same problem with HTC HD2. EveryTime when I need to use Holux M1000 BT GPS. I must go to BT settings and manualy connect SPP connection with BT device.
Also have exactly the same problem trying to use a GNS TrafficBox FM9BT-C TMC receiver with iGo on a HD2. Pairs fine but then when you try to use iGo the window pops up again briefly but without enough time to allow you to select the com port.
Surely someone must know how to fix this?
Very annoying