How to enter boot mode on HP hx2110? - Upgrading, Modifying and Unlocking

my HP freeze on startup screen and pc didnt se it via USB
i tried hard reset but no luck
so how to flash this brick?
maybe i need to enter bootloader mode for flash but how to do this?
please help
Thanx
B.R.

please help

still need any info

still need info about boot mode for hx2110

Related

Failed JasJar update - Please help

I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
dosada said:
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
Click to expand...
Click to collapse
hello my friend ithink you stuck on boatloader please se related theards and posts
dont forget to take a look at wiki
if your problem dosen't solve continue this theard
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
dosada said:
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
Click to expand...
Click to collapse
Hi,
Bootloader combination key is Backlight + Power + Reset.
1] Make sure you connect the USB cable to main USB port on computer and
not the USB extesion / hub.
2] Remove any SD card you may have inserted in the card slot
3] try to flash again it must be completed

please help me!!!!!!!!!!

I try to reflash one loox n500 pda but i think the rom was not good even was labeled as n5xxx and my pda is turn in one piece of furniture.When I started apears like vertical stripes on the display and nothing but with activesync i can explore it!
Somebody please help me with an advice please!!!!!!
Try the engineering mode if hard reset does not work....
how is engineering mode please!
I am a beginner
Try to flash it with recovery mode ( press power + record button + reset button) it enter in bootloader mode and use the fsc flash utility normally.
If don't work, send it to fsc support center.
aurnic said:
how is engineering mode please!
I am a beginner
Click to expand...
Click to collapse

asus p527 bad flash please help

tried to create my own rom...failed miserably.
i cannot enter bootloader mode now.
the phone doews not get recognized by usb.
just the blue asus flash comes up.
i have also tried to format a good rom via storage card but i cannot do so...
have i briced my phone?
what is the manual way to get into bootloader in the asus p527?
plese help.......desperate.
My friend is in the same situation with the same phone. Any ideas? Can not get intp bootloader.

not going to droidboot nor download mode (ASUS Fonepad 7 k012-fe170cg)

i am flashing my asus fonepad 7
"fastboot erase system "
suddenly my datacable was disconnected in the process
i rebooted the device
it was stuck on asus logo
i have no access to driodboot menu(the menu which i usally get by pressing volume up+power button)and stuck on asus logo
my device is not even going to download mode
Please help
Thank in advance
Mine too.. . Cant enter the Fastboot/Recovery mode..
Looking for all the available solution for that..
Sent from my 2014817 using Tapatalk
try try try to get in fastboot mode coz if you cant you are lost...
i've the same problem............ someone who help me??

Hard bricked Galaxy A5 2017 - No recovery - No Download mode ( volume button probl )

Hi
I just get my galaxy a5 from my bro, first thing it boot always in safe mode, I searched i found that my volume down is always stuck so it keep booting in safe mode.
I opened my phone, I tested the button with a tester, they work properly so I concluded that the problem is in the motherboard.
So I wanne to root my phone to get a tools to bypass that, I put the phone with ADB to download mode ( only way to do it) , with odin I have selected the root file TWRP_3.1.1-0_a5y17lte to the wrong case BL,
Now the phone stuck in bootloop and I can't flash it again with odin cause I no access to download mode.
I can go to download mode with Home+Power but can't continue with volume UP.
I need your help my probleme if there is a solution for me.
Thanks
I used USB JIG to force download mode but nothing happen ;(
Please some suggestion
Try to connect Smart swicth it will help you out.
Thanks
Smart switch don't help cause no download mode

Categories

Resources