tried to create my own rom...failed miserably.
i cannot enter bootloader mode now.
the phone doews not get recognized by usb.
just the blue asus flash comes up.
i have also tried to format a good rom via storage card but i cannot do so...
have i briced my phone?
what is the manual way to get into bootloader in the asus p527?
plese help.......desperate.
My friend is in the same situation with the same phone. Any ideas? Can not get intp bootloader.
Related
my HP freeze on startup screen and pc didnt se it via USB
i tried hard reset but no luck
so how to flash this brick?
maybe i need to enter bootloader mode for flash but how to do this?
please help
Thanx
B.R.
please help
still need any info
still need info about boot mode for hx2110
Acer Iconia a100
i Bricked it, it sits at the acer screen. no signs of loading. It responds to all of the vol + power +
scape combinations. I get bootloader error when i try that combination, the sd update just hangs there i
grabbed flexreaver rom and renamed it update with the file type being a zip and still no cigar.
I wanted to run the fastest most bare rom as possible i think the problem was that i did NOT have the
bootloader unlocked. I tried one idea where you run somekind of batch file and on my tab itself it
stated that the bootloader was NOT unlocked. i have no idea where to go from here. When i go into usb
mode or db it does not connect with the computer i cannot see or add or remvoe file, but i can connect
with msdos to run batches.
I have spent hours looking for a solution and found help only in outdated links, foriegn languages
and a500 tutorials. I have an acer A100. Any help offered to me is much appreciated but if you are going
to help me please be thorough and leave me alot of details please, i do not have the understanding
or the command it takes to successfully unbrick my tablet. So.. Any ideas?
kungfaux17 said:
Acer Iconia a100
i Bricked it, it sits at the acer screen. no signs of loading. It responds to all of the vol + power +
scape combinations. I get bootloader error when i try that combination, the sd update just hangs there i
grabbed flexreaver rom and renamed it update with the file type being a zip and still no cigar.
I wanted to run the fastest most bare rom as possible i think the problem was that i did NOT have the
bootloader unlocked. I tried one idea where you run somekind of batch file and on my tab itself it
stated that the bootloader was NOT unlocked. i have no idea where to go from here. When i go into usb
mode or db it does not connect with the computer i cannot see or add or remvoe file, but i can connect
with msdos to run batches.
I have spent hours looking for a solution and found help only in outdated links, foriegn languages
and a500 tutorials. I have an acer A100. Any help offered to me is much appreciated but if you are going
to help me please be thorough and leave me alot of details please, i do not have the understanding
or the command it takes to successfully unbrick my tablet. So.. Any ideas?
Click to expand...
Click to collapse
I think we need a lot more information in a clear manner.
From the beginning, what did you do? Do you have ICS or HC? Rooted? Did you try to unlock the boot loader? Try to install a recovery?
What batch file did you run, what was it for?
At what point in all of those answers did it stop booting?
Have you hard reset?
You say the computer can not see it but say you can run batch files on it, which is it? Are they seeing it or just running anyways? What boot loader version does it say in the upper left corner?
All if this information provided clearly will tell us exactly where you stand and if it can be corrected.
Tapatalked from my Galaxy S II.
boot loader v0.03.06-ics:starting fastboot usb download..
I had the tablet rooted and i had not updated to the OTA update.
i have only tried the vol+power combos and i tried to rename a rom to update.zip so i could do that update reboot thing and it just hangs..i tried a pin the reset hole still nothing..
i had tried zeronulls bootloader unlock at that point was when my tablet bricked.. since then ive tried to run fastboot_recovery but it doesnt work. i can connect my device with usb and it will respond to certain batches acer a100 unbrick (a100-recovery-win/a100-push-tools) but i cannot access any of the files on the sd card through my computer.
kungfaux17 said:
boot loader v0.03.06-ics:starting fastboot usb download..
I had the tablet rooted and i had not updated to the OTA update.
i have only tried the vol+power combos and i tried to rename a rom to update.zip so i could do that update reboot thing and it just hangs..i tried a pin the reset hole still nothing..
i had tried zeronulls bootloader unlock at that point was when my tablet bricked.. since then ive tried to run fastboot_recovery but it doesnt work. i can connect my device with usb and it will respond to certain batches acer a100 unbrick (a100-recovery-win/a100-push-tools) but i cannot access any of the files on the sd card through my computer.
Click to expand...
Click to collapse
Go to where it says download protocal then in the folder with adb and fast boot from those zips you downloaded open a command prompt, CD to that folder then type
fastboot oem unlock then get ready for the volume keys.
You missed the unlock that's probably why it got jammed up.
So....find the folder you unzipped the boot loader unlock stuff to, copy it to c:\unlock
Open a command prompt, type
cd c:\unlock
Then type
fastboot oem unlock
Place one hand on the tab so you have a finger on each volume button
Hit enter
On the tab press volume up then volume down (furthest from lock switch then closest to lock switch) as soon as the unlock screen comes up.
Gotta be quick if you miss it try again.
Tapatalked from my Galaxy S II.
ha! youre amazing!.. i got it.. ok, now then it still hangs at the acer screen but now it says bootloader version 0.03.06-ics (unlock mode)
what do i do next?
kungfaux17 said:
ha! youre amazing!.. i got it.. ok, now then it still hangs at the acer screen but now it says bootloader version 0.03.06-ics (unlock mode)
what do i do next?
Click to expand...
Click to collapse
Maybe hard reset or just install a custom recovery and then install a custom rom or something lol limitless possibilities now.
Tapatalked from my Galaxy S II.
Acer A100 BRICK NEED ADVICE
marvz_tech said:
Acer A100 BRICK NEED ADVICE
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=27938361
Brick thread, good place to browse.
Tapatalked from my HTC DNA - ReVolt
Hi, friend gived me his phone to repair, he had bricked it, I cant access to Recovery or fastboot... and when i tried to download stock rom via preloader my pc si still connecting/disconnecting with phone. I found on internet this is also damaged preloader. So I need to download by HW preloader, so I must found pin called CKOLA etc. But when i opened phone, there isnt any labels on board. Please help me, and sorry for my english am a czech.
picture of board:
i65.tinypic.com/122j18p.jpg
Try to flash it via adb using our legend stock rom miui5
i cant acess to recovery or system, phone wont turn on... and when trying to download via flashtools, phone connect to pc and after 3 seconds disconnect and this repeats.
Can you provide the picture so we can help you out as we can. ?
Some of us are bound to "brick" our Max's at some point, we need a genius that knows the right test points to help us out!
Thanks!
Totally agree. I now manage to boot into EDL and Fastboot, but have a locked bootloader and don't know how to reset the phone
(the only thing I did was an update, then bootloop...)
Help Please..Same with me.
My phone was hardbrick i think.
No download mode, no fastboot mode and my device manager just only recognize as HS-USB Diagnostic 900E
How i can get back to life my phone
Thanks
This should work on Mi Max too:
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page%3D1&mobile=2
Check here: http://en.miui.com/thread-328371-1-1.html
panospc said:
Check here: http://en.miui.com/thread-328371-1-1.html
Click to expand...
Click to collapse
I also posted it here
I am everywhere
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. I am using this method
http://en.miui.com/thread-328371-1-1.html
Everything is good up to when I click on flash. Then I always get the error message.
Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
Hello people,
First of all, I'm new here with english as my secondary language, so be easy with me, please.
So, I have my unrooted LG G3 D855 with locked bootloader and when I'm trying to boot it up 'Kernel Crash' appears with options to 'reboot' (which makes it back to crash again) and Dload Mode (it doesn't do anything). I saw posts with it but I didn't find fix for myself. I tried to install custom recovery and get custom ROM but my 'USB debugging' is not enabled. I tried finding threads with enabling USB debugging via PC but I dind't find proper answer. I also tried to enter in mode where you can make a factory reset, tried it and Kernel Crash appeared again. And sometimes crash doesn't appear but then I'm stuck with boot loop.
Did I do something wrong ? Is it even possible to do anything to make it work ? I don't need data or media, just need to make my phone work.
I hope it's a good thread and someone can actually help me. Thank you.
I had "Demigod kernel crash" and solved by reflashing phone with a professional box using 910k USB cable, since LG software upgrade didn't recognize the phone
I wasn't able to save internal memory data because TWRP crashed at startup and was formatted in F2FS
Since you have locked BL you just have to reflash stock ROM, just hope that phone will be recognized from PC
leo.heric said:
Hello people,
First of all, I'm new here with english as my secondary language, so be easy with me, please.
So, I have my unrooted LG G3 D855 with locked bootloader and when I'm trying to boot it up 'Kernel Crash' appears with options to 'reboot' (which makes it back to crash again) and Dload Mode (it doesn't do anything). I saw posts with it but I didn't find fix for myself. I tried to install custom recovery and get custom ROM but my 'USB debugging' is not enabled. I tried finding threads with enabling USB debugging via PC but I dind't find proper answer. I also tried to enter in mode where you can make a factory reset, tried it and Kernel Crash appeared again. And sometimes crash doesn't appear but then I'm stuck with boot loop.
Did I do something wrong ? Is it even possible to do anything to make it work ? I don't need data or media, just need to make my phone work.
I hope it's a good thread and someone can actually help me. Thank you.
Click to expand...
Click to collapse
Is your device goes to DOWNLOAD mode? (You can do this by powering off device completely then hold volume up key and insert usb cable).
If you have DOWNLOAD mode, then flash stock firmware. (Remember, if you flash using LG Flash Tool, then you have two options of flashing (Normal Flash & CSE Flash. In normal flash, your internal memory will not formatted. In CSE flash, internal memory will be formatted. This is what i learnt from my experiments.). I'll hope this helps.